The Scheppach DMS1100 woodturning lathe complete with base is aimed at the professional or serious enthusiast. Even though this lathe is very similar to the smaller one the DMS900 it is made from a heavier construction & has a larger 1HP induction motor which will definetely appeal to the woodturner who is looking for a higher spec machine. ...

The scheppach dms 900 woodturning lathe is designed with the committed artisan in mind as well as the professional who requires a machine with an excellent

Specification at a competitive price. Built of cast iron the dms series lathes are made to last. Powered by a very quiet running, high torque 0, 75 hp induction motor, it gives ten speeds ranging from 500 rpm 2, 100 rpm & is therefore ideal for small diameter spindle work through to large bowl turning. Speed selection is made by a conveniently placed lever. Both the headstock, tailstock & lathe bed are made from solid cast iron which has been accurately machined to allow for smooth movement & minimal levels of vibration. The pivoting headstock turns 360° & locks to facilitate outboard turning. Unique to the scheppach dms series is the clockwise & anticlockwise spindle rotation which offers the advantage of positioning the tool rest to the left or right when swivelling the headstock. The l & r turning facility also produces perfect sanding results on the finished workpiece irrespective of the lay of the wood grain. The tailstock is bored to allow for long hole boring when making table & standard lamps. Fitted with the industry standard 1" x 8 tpi main spindle, there will never be a need to worry about sourcing a wide range of accessories. Standard equipment
Includes:: stable, torsion resistant grey cast iron construction, plane, polished turning bed, cast iron spindle stock, tailstock & tool rest, toolrest & tailstock with eccentric clamp, slewable spindle stock, face plate, drive centre 4-point, following centre point, adaptor for m 33, 10 spindle speeds, poly v belt drive, wise & anticlockwise rotation.

Dimensions (l/w/h): 1, 510mm x 490/1mm x 120mm. Bed

Height: 890mm. Tailstock bore (hollow spindle): 9mm. Distance between centres: 825mm. Height of centers over bed ° sleeve: 152mm. Spindle speeds: 500/600/750/900/1, 000/ 1, 200/1, 400/1, 600/1, 800/ 2, 100rpm. Turning dia over bed: 304mm. Tool rest length: 300mm. Face plate diameter: 150mm. Weight: 80kgs approx.






...

The scheppach dmt 450 is ideal for the hobby woodturner who does not have sufficient dedicated workbench space for his lathe, being small enough to “side“ when not in use. It is also most useful for woodturners who are on the move as it is small enough to transport in the boot of a car. The powerful 1/2hp induction motor has high torque capacity to allow for turning of heavy timbers without stalling. The precision machined main drive spindle runs on two industrially rated sealed-for-life bearings to maximize support & has a 1" by 8 tpi thread. The 5 step pulley system with poly-v belt drive offers a speed range between 650 & 3, 000 rpm: speed change being quick & simple. This new scheppach mini lathe has a heavy-duty cast iron bed that ensures stability & minimal vibration. Distinguished also by its

Specification, the dmt 450 gives 445 mm between centres & a turning diameter of 254 mm. The tailstock is hollow allowing up to 9 mm long hole boring. This is a well machined lathe that will bring years of turning satisfaction & find a home with many a discerning woodturner. Supplied with tool rest, face plate & revolving centre & a hollow tailstock for long hole boring as standard equipment. Standard equipment: stable, torsion resistant grey cast iron construction, plane, polished turning bed, cast iron spindle stock, tailstock & tool rest, toolrest & tailstock with eccentric clamp, face plate, following centre point, drive centre 4-point, adaptor for m 33, 5 spindle speeds, poly v belt drive.

Dimensions (l/w/h): 770mm x 285mm x 375mm. Bed

Height: 190mm. Spindle head thread: 1“ x 8 tpi. Spindle head cone: mk 2. Tailstock cone: mk 2. Tailstock bore (hollow spindle): 9mm. Distance between centres: 445mm. Tool rest length: 150mm. Face plate dia: 75mm.





...

The Scheppach rabs 16x comes complete with the guard & is 240V. This radial drill press is part of the Scheppach family of radial drill presses bringing the position of the drill exactly where you need it> The table of this drill can be adjusted. This is a floor standing unit with the table pivoting 360 degrees. ...

Keep your workshop clean from wood chips & dust & the air you breath free from harmful dust with a ha 1000 barrel extractor. The ha 1000 is a safe to use, highly portable barrel extractor, with a strong sturdy design. ideal for any workshop that want to keep their work area clean & tidy. The ha 1000 can be transported in the boot of most cars or stored away under a workbench until needed. this extractor is a must for any workman on the move or a small workshop with limited room. The ha 1000 has a strong metal barrel as the main collection container. the flexible hose has multiple adaptor for use with saw benches down to small power tools. Various filters can be used & the ha 1000 is supplied with six paper filters to help start you on a quest for clean air & a tidy, clean work area. features 54.3 l/sec air capacity. low noise level. specifications: model: ha 1000.dimensions (lwh): 370 x 370 x 585mm. air capacity: 54.3 l/sec. filter surface: 1m 2. filter capacity: 50 litres. hose length: 2 metres. hose: 100mm in dia. weight: 12kgs. motor: 370 motor: 1.0w (1.4hp) 230v. ...

The scheppach ha 2000 is suitable for somone who is used to working cleanly & precisely & who expects this also from the machines & tools in their workshop. The ha 2000 from scheppach not only extracts with the utmost efficiency* but it also filters dust particles to a volume of 800 m 3 per hour. A most efficient propeller system blows shavings & dust through the separation system where the course particles are directed to a plastic collection bag. newly cleaned air is then returned to the workshop area through the filter system. this recycling also means great savings in heating costs. More filters, more performance, more clean air. it is possible to increase the extraction performance of the ha 2000 even further by installing the special filter cartridge. this easy to clean unit retains even the smallest dust particles & improves air circulation as a result of its large filter surface. It is possible to increase the extraction performance of the ha 2000 even further by installing the special filter cartridge. This easy to clean unit retains even the smallest dust particles & improves air circulation as a result of its large filter surface *like the ha 3200 & ha 2600 the ha 2000 is not licensed for use in a professional workshop (only authorised for use by home workers).. Safe & sturdy wheel base, filter bag, bia tested, waste bag, hose, connection piece, earthing set. dimensions: (l / w / h ) 650 x 500 x 1640mm. Air capacity 800 m 3/h, 1/sec. Under pressure 1 mbar filter surface 80 m 2. Filling capacity. 2, 000 litres. ...