United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Woodworking > Routing > Router Cutters
Archived Product
-
A boxed set of 1/4in.
router bits with 30
different cutter shapes
which enable the creation
of a variety of profiles,
grooves and mouldings in
softwoods, hardwoods,
mdf or plywood. Tungsten
carbide tips ensure long
life and the sturdy
aluminium storage case
provides a safe place to
store the bits when they
are not being used.
contents: one of each
dia depth
straight cutter 5.0mm
12mm
straight cutter 6.0mm
20mm
straight cutter 8.0mm
20mm
straight cutter 10.0mm
20mm
straight cutter 12.0mm
20mm
straight cutter 14.0mm
20mm
straight cutter 16.0mm
20mm
straight cutter 18.0mm
20mm
straight cutter 20.0mm
20mm
dovetail cutter 12.7mm
13mm
90 deg v cutter 9.5mm 9mm
90 deg v cutter 12.7mm
9mm
core box 3.2mm rad 6.0mm
6mm
core box 6.35mm rad
12.7mm 10mm
classical pannel 12.7mm
9mm
guided flush trimmer
12.7mm 13mm
25 deg guided chamfer
16.0mm 9mm
45 deg guided chamfer
32.0mm 13mm
roman ogee 4mm rad 25.0mm
12mm
guided rabbeting cutter
28.6mm 13mm
guided cove 6.35mm 22.0mm
12mm
guided cove 9.5mm 28.0mm
12mm
guided rounding over -
3.2mm rad 15.0mm 7mm
guided rounding over -
6.35mm rad 22.0mm 12mm
guided rounding over -
7.9mm rad 25.0mm 14mm
guided rounding over -
9.5mm rad 28.0mm 14mm
guided beading - 3.2mm
rad 16.0mm 8mm
guided beading - 6.5mm
rad 22.0mm 12mm
guided beading - 7.9mm
rad 25.0mm 14mm
guided beading - 9.5mm
rad 28.0mm
15mm.
Availability: In Stock
£49.59
Archived Product
-
These plug cutters are
designed to exactly fit
the counterbored holes
produced by group 62 & 63
trend cutters.
Recommended speed - 1,
000-20, 000 rpm.
tct for use with drilling
machines or routers.
h.s.s.
1/4in shank.
c = 9.5 mm
d = 16 mm
plug body diameter. 16
mm.
Availability: In Stock
£38.89
Archived Product
-
A boxed set of 1/2in.
router bits with 15
different cutter shapes
which enable the creation
of a variety of profiles,
grooves and mouldings in
softwoods, hardwoods,
mdf or plywood. Tungsten
carbide tips ensure long
life and the sturdy
aluminium storage case
provides a safe place to
store the bits when they
are not being used.
contents: one of each
dia dep
straight cutter 3.2mm
14mm
straight cutter 6.5mm
20mm
straight cutter 12.7mm
25mm
straight cutter 19.0mm
20mm
dovetail cutter 12.7mm
8mm
panel pilot 6.5mm 30mm
guided flush trimmer
12.7mm 12mm
mortising cutter 12.7mm
13mm
core box 3.2mm rad 7.0mm
6mm
90 deg v cutter 12.7mm
10mm
45 deg guided chamfer
30.0mm 14mm
guided cove 9.5mm 30.0mm
14mm
guided rabbeting cutter
30.0mm 10mm
guided roman ogee 25.0mm
12mm
guided rounding - 10mm
rad 32.0mm
16mm.
Availability: In Stock
£28.69
Archived Product
-
A boxed set of 1/4in.
router bits with 12
different cutter shapes
which enable the creation
of a variety of profiles,
grooves and mouldings in
softwoods, hardwoods,
mdf or plywood. Tungsten
carbide tips ensure long
life and the sturdy
aluminium storage case
provides a safe place to
store the bits when they
are not being used.
set contains one of each
of the following.
1/2in dovetail
1/4in straight
1/2in straight
5/8in straight
1/2in flush trim
1/4in rounding over
3/8in rounding over
5/32in roman ogee
1/2in cove box
1/4in cove
1.1/4in 45⺠chamfer
1/2in 90⺠v
grooving.
Availability: In Stock
£22.15
Archived Product
-
12 piece router bit sets
assortment of router bits
with t.c.t. Heads to suit
most applications.
Supplied in display case.
Contents. 3 x straight
bits - 6, 12 and 16mm
dia. 90° v
grooving bit. dovetail
bit 12.7mm dia. 45°
chamfer bit. bearing
flush trim bit - 12.7mm
dia. 2 x radius corner
round bits - r 6.3, r
9.5mm. cove box bit r
6.3mm. cove bit r
6.3mm. roman ogee bit
r 4mm. hexagon key.
Availability: In Stock
£22.49
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 19 mm
d = 9 mm
23/64in.
Availability: In Stock
£20.25
Archived Product
-
These type of cutters are
used for edging,
grooving, veining work
and chamfer cutting, on
man made fibre boards,
natural timbers and
plastics. Tools are
offered to produce
various angles for
engraving, chamfering
and v grooving.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
t.c.t.
shank 1/2in.
a = 45â°
d = 38 mm
c1 = 19 mm
c2 = 26.5
mm.
Availability: In Stock
£39.90
Archived Product
-
These machine bits are
typically used by kitchen
furniture manufacturers
for recessing circular
hinges. Group 104 with
scribers are used on
veneered and wood
surfaces.
caution:-
not for use with hand
held power tools - use in
piller drills only
tct.
1/4in shank.
ol = 65mm
diameter =
35mm.
Availability: In Stock
£41.45
Archived Product
-
These machine bits are
typically used by kitchen
furniture manufacturers
for recessing circular
hinges. Group 104 with
scribers are used on
veneered and wood
surfaces.
caution:-
not for use with hand
held power tools - use in
piller drills only
tct.
3/8in shank.
ol = 65mm
diamter =
35mm.
Availability: In Stock
£40.30
Archived Product
-
Machine bit for use in
hand portable plunge
routers. These specially
designed machine bits
have a new form of
scriber to allow use at
high speeds.
(max. 20, 000 rpm).
for accurate repetitive
rounting, a template and
guide bush fitted to the
router base should be
used.
diameter = 35mm.
overall length = 60mm
shank diameter = 1/2inch
recommended speeds 1,
000: 20,
000rpm.
Availability: In Stock
£54.15
Archived Product
-
These types of cutters
are used for edging and
chamfer cutting, on man
made fibre boards,
natural timbers and
plastics. Tools are
offered to produce
various angles for
chamfering.
pin guarded cutters
enable curved work to be
undertaken, bearings
running along the board
edge or a template.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
t.c.t
1/4in shank.
a = 45â°
c1 = 10 mm
c2 = 14
mm.
Availability: In Stock
£33.69
Archived Product
-
Chamfer v grooving
cutters are used for
bevelling, chamfering
and producing motar
grooves. Due to design an
approx. 1.0mm flat will
be found on the nose.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
t.c.t.
1/3in shank.
diameter. 19mm
c1 = 9.2mm.
c2 =
13.0mm.
Availability: In Stock
£23.35
Archived Product
-
Chamfer v grooving
cutters are used for
bevelling, chamfering
and producing motar
grooves. Due to design an
approx. 1.0mm flat will
be found on the nose.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
tooling: t.c.t.
1/4in shank.
a = 45â°
d = 19.1 mm
c1 = 9.2 mm
c2 = 13
mm.
Availability: In Stock
£23.35
Archived Product
-
Chamfer v grooving
cutters are used for
bevelling, chamfering
and producing motar
grooves. Due to design an
approx. 1.0mm flat will
be found on the nose.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
tooling: t.c.t.
1/4in shank.
a = 60â°
d = 12.7 mm
c1 = 10.3 mm
c2 = 11.9
mm.
Availability: In Stock
£21.79
Archived Product
-
These cutters are
primarily designed to
produce panel moulds on
cabinet doors and drawer
fronts in the furniture
industry. They may also
be used for edge moulding
ovolo, cove and ogee
profiles.
tooling :t.c.t.
1/4in shank.
r - 4 mm
d - 13 mm
d - 1.2 mm
c - 12
mm.
Availability: In Stock
£35.75
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 3 mm
d = 6 mm
c = 15
mm.
Availability: In Stock
£25.39
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 5 mm
d = 10 mm
c = 18
mm.
Availability: In Stock
£27.99
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 6.3 mm
d = 12.7 mm
c = 19
mm.
Availability: In Stock
£37.85
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 7 mm
d = 14 mm
c = 18
mm.
Availability: In Stock
£34.20
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 8 mm
d = 16 mm
c = 19.5
mm.
Availability: In Stock
£39.90
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
tooling: t.c.t.
1/4in shank.
r = 10 mm
d = 20 mm
c = 18
mm.
Availability: In Stock
£45.60
Archived Product
-
These cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames. These cutters are
suitable for use on all
natural timbers and
man-made boards.
these cutters are used
extensively for routing
edge moulds, face
grooves, columns,
fluting, water slots,
engraving and panel
moulds in products such
as desk tops, fire
surrounds, draining
boards and picture
frames.
these cutters are
suitable for use on all
natural timbers and
man-made boards.
tc.
1/2in shank
r = 12.7 mm
d = 25.4 mm
c = 15.9
mm.
Availability: In Stock
£49.25
Archived Product
-
These cutters are used
extensively in the
furniture and cabinet
making trades to cut edge
and face mouldings in
natural timbers and
man-made boards. Bearing
guided versions can be
run along the work piece
edge or template,
particularly useful when
curved work is
undertaken. applications
include drawer fronts,
ledges, table tops,
door, shelves,
architraves, false
panels and cornices.
shank mounted bearing
follows template mounted
on board surface.
it is advisable that the
template is at least 5mm
thicker than the cut
length of the cutter.
tooling - t.c.t.
1/2in shank.
r - 3.5 mm
d - 22 mm
c - 10 mm
b - 22
mm.
Availability: In Stock
£44.59
Archived Product
-
Used when machining
traditional panels and
frame doors, formerly
done on spindle moulders
can now be performed with
heavy-duty routers
mounted in fixed
positions, either
overhead or inverted.
These raised panel
cutters run best at lower
speeds between 12, 000
and 18, 000 rpm and match
the trens range of
profile scribers.
all are suitable for use
on natural timbers and
mdf.
t.c.t.
1/2in shank.
d - 86 mm
c - 12.7 mm
b - 12.7 mm
a -
15â°.
Availability: In Stock
£101.59
Archived Product
-
These cutters are
suitable for grooving,
rebating, mortising &
drilling, the single
flute cutters offer fast
free cutting. if you
require a cleaner cut
please use two flute
cutters. The depth of cut
on cutters of 2.0 mm
diameter and below should
be a maximum of 1.0 mm
per pass.
small diameters in
tungsten carbide must be
handled with care to
avoid breakage and very
shallow passes must be
made. use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
& certain hardwoods
single flute cutters must
not be used in eccentric
chucks.
tooling: tungsten carbide
1/4in shank.
diameter d 1.5 mm.
depth c 6
mm.
Availability: In Stock
£18.15
Archived Product
-
Made from a single piece
of high speed steel,
ground with a very fine
edge. They are only
suitable for non abrasive
materials, but will give
a superior finish in soft
timbers. generally hss
cutters are slightly less
expensive than their tc
grades, but can be more
suitable for certain
applications.
these cutters are
suitable for grooving,
rebating, mortising &
drilling, the single
flute cutters offer fast
free cutting. if you
require a cleaner cut
please use two flute
cutters.
the depth of cut on
cutters of 2.0 mm
diameter and below should
be a maximum of 1.0 mm
per pass.
single flute cutters must
not be used in eccentric
chucks.
tooling: high speed
steel.
1/4in shank.
diameter d 2 mm
diameter d 5/64 in
depth c 5
mm.
Availability: In Stock
£9.35
Archived Product
-
These cutters are
suitable for grooving,
rebating, mortising &
drilling, the single
flute cutters offer fast
free cutting. if you
require a cleaner cut
please use two flute
cutters. The depth of cut
on cutters of 2.0 mm
diameter and below should
be a maximum of 1.0 mm
per pass.
small diameters in
tungsten carbide must be
handled with care to
avoid breakage and very
shallow passes must be
made. use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
& certain hardwoods
single flute cutters must
not be used in eccentric
chucks.
tooling: tungsten carbide
1/4in shank.
diameter d 3.2 mm
diameter d 1/8 in
depth c 8
mm.
Availability: In Stock
£20.75
Archived Product
-
These cutters are
suitable for grooving,
rebating, mortising &
drilling, the single
flute cutters offer fast
free cutting. if you
require a cleaner cut
please use two flute
cutters. The depth of cut
on cutters of 2.0 mm
diameter and below should
be a maximum of 1.0 mm
per pass.
small diameters in
tungsten carbide must be
handled with care to
avoid breakage and very
shallow passes must be
made. use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
& certain hardwoods
single flute cutters must
not be used in eccentric
chucks.
tooling: tungsten carbide
1/4in shank.
diameter d 14 mm
diameter d 5/32 in
depth c 9
mm.
Availability: In Stock
£16.09
Archived Product
-
Made from a single piece
of high speed steel,
ground with a very fine
edge. They are only
suitable for non abrasive
materials, but will give
a superior finish in soft
timbers. generally hss
cutters are slightly less
expensive than their tc
grades, but can be more
suitable for certain
applications.
these cutters are
suitable for grooving,
rebating, mortising &
drilling, the single
flute cutters offer fast
free cutting. if you
require a cleaner cut
please use two flute
cutters.
the depth of cut on
cutters of 2.0 mm
diameter and below should
be a maximum of 1.0 mm
per pass.
single flute cutters must
not be used in eccentric
chucks.
tooling: high speed
steel.
1/4in shank.
diameter d 5.5 mm
diameter d 7/32 in
depth c 19
mm.
Availability: In Stock
£8.29
Archived Product
-
2mm diam, cut length
5mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£11.75
Archived Product
-
Tooling for use on webbed
aluminium and upvc
extrusions by window and
door fabricators. cutters
are produced in special
high speed steel (hsse)
to ensures a clean cut
and resist the abrasive
nature of anodised
aluminium extrusions.
cutters are designed to
plunge and machine or
mill lateral slots. All
aluminium tooling should
be used with a coolant,
wax stick or lubricant.
material should be
securely clampedm tooling
should be used with a
coolant, wax stick or
lubricant.
hsse.
one flute helical
plunge-slotting bit
tooling for use on webbed
aluminium and upvc
extrusions by window and
door fabricators. cutters
are produced in special
high speed steel (hsse)
to ensures a clean cut
and resist the abrasive
nature of anodised
aluminium extrusions.
cutters are designed to
plunge and machine or
mill lateral slots
all aluminium tooling
should be used with a
coolant, wax stick or
lubricant. material
should be securely
clampedm tooling should
be used with a coolant,
wax stick or lubricant.
hsse.
one flute helical
plunge-slotting bit
8mm shank.
d = 5 mm
c = 12 mm
ol = 60
mm.
Availability: In Stock
£17.65
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 11 mm
d = 4.0 mm
5/32.
Availability: In Stock
£16.59
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 4.5 mm
d = 11
mm.
Availability: In Stock
£17.65
Archived Product
-
Attractive edge moulds,
a full corner bead can be
produced by making a
second pass at 90âº.
T.c.t.
shank = 1/4in.
r = 4.8mm
d = 26mm
d = 22mm
c = 16mm
b = 15.9mm
craft range - they can be
used on all man-made
boards such as medium
density fibre board,
chipboard, and also
natural timbers and most
plastics
bead & reed cutters
bead and reed cutters are
ideally suited to form
straight or curved
decorative edge mouldings
on table tops, chair
legs and frames. they can
also be used to produce
complete round over
profiles for window
boards and stair tread
nosings. cutters can be
combined to form
compounded one-off
mouldings for individual
applications. certain
staff bead cutters are
used to join boards and
produce hinged joints for
table
tops.
Availability: In Stock
£33.69
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
a engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 1/2in
12.7mm
c - cutting length - 1
1/4 31.8mm
t.c.t.
2
flutes.
Availability: In Stock
£13.49
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 9.5mm
3/8in.
cutting length 25mm
shank diameter:
1/4in.
Availability: In Stock
£6.25
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 19.0mm
3/4in.
cutting length: 25mm.
shank diameter:
1/4in.
Availability: In Stock
£6.85
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applications
such as engraving,
grooving, rebating and
shallow mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 10mm
c - cutting length -
19.1mm
t.c.t.
Availability: In Stock
£11.39
Archived Product
-
3.2mm diam, cut length
11.1mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£11.25
Archived Product
-
A two flute straight
cutter producing a clean
finish to abrasive
timbers such as
chipboard, mdf, plywood
and certain
hardwoods.tr12 features a
solid carbide insert and
centre tip for drilling.
Cutting diameter: 12mm
cutting length: 19mm
shank diameter:
1/4in.
Availability: In Stock
£20.25
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 8.0mm
5/16in.
cutting length: 19mm.
shank diameter:
1/4in.
Availability: In Stock
£3.39
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
a engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 1/4in
6.3mm
c - cutting length -
3/4in 19.1mm
t.c.t.
2
flutes.
Availability: In Stock
£7.79
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 6.3mm
1/4in.
cutting length 25mm
shank diameter:
1/4in.
Availability: In Stock
£3.29
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
a engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 15/64in
6.0mm
c - cutting length -
5/8in 16mm
t.c.t.
2
flutes.
Availability: In Stock
£8.29
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 25.0mm
63/64in.
cutting length 25mm
shank diameter:
1/4in.
Availability: In Stock
£12.35
Archived Product
-
4mm diam, cut length
11.1mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£11.25
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 20.0mm
25/32in.
cutting length 25mm
shank diameter:
1/4in.
Availability: In Stock
£8.99
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
as engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 3/8 in
9.5mm
c - cutting length - 1
1/4in 31.8mm
t.c.t.
2
flutes.
Availability: In Stock
£9.85
Archived Product
-
A two flute straight
cutter producing a clean
finish to abrasive
timbers such as
chipboard, mdf, plywood
and certain
hardwoods.tr12 features a
solid carbide insert and
centre tip for drilling.
Cutting diameter: 12mm
cutting length: 63mm
shank diameter:
1/2in.
Availability: In Stock
£26.95
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 3.2mm
1/8in.
cutting length 11mm
shank diameter:
1/4in.
Availability: In Stock
£5.49
Archived Product
-
6.3mm diam, cut length
12.7mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£10.15
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
a engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 3/8in
9.5mm
c - cutting length -
3/4in 19.1mm
t.c.t.
2
flutes.
Availability: In Stock
£9.85
Archived Product
-
This two wing slotting
cutter is ideal for
grooving and rebating
operations. A 1/2in
diameter, bearing is
supplied with every
cutter.
depth of cut can be
changed by purchasing
alternative bearing
sizes.
t.c.t.
shank = 1/4in.
c = 6.3mm (slots)
depth with standard
cutter =
3/8in.
Availability: In Stock
£19.69
Archived Product
-
4.8mm diam, cut length
11.1mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£11.79
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 9.0mm
11/32in.
cutting length 19mm
shank diameter:
1/4in.
Availability: In Stock
£3.69
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 7.0mm
9/32in.
cutting length 19mm
shank diameter:
1/4in.
Availability: In Stock
£3.10
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 18.2mm
23/32in.
cutting length: 21mm.
shank diameter:
1/4in.
Availability: In Stock
£6.39
Archived Product
-
Chamfer & v groove
cutters. These types of
cutters are used for
edging, grooving,
veining work and chamfer
cutting, on man-made
fibre boards, natural
timbers and plastics.
tools are offered to
produce various angles
for engraving,
chamfering and v
grooving. ball bearing
and pin guided cutters
enable curved work to be
undertaken, bearings
running along the board
edge or a template.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
the size of v groove on
this cutter is:-
d = 12.7mm
c = 6.0mm.
angle = 45âº
t.c.t.
shank
1/4in.
Availability: In Stock
£12.99
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 9.5mm
3/8in.
cutting length 32mm
shank diameter:
1/2in.
Availability: In Stock
£6.00
Archived Product
-
6.3mm diam, cut length
19.1mm. Single fluted
tungsten carbide straight
cutters for fast free
cutting. These cutters
have an extra clearance
and give a stronger
backing support to the
tip. Singel flutes should
be chosen where speed and
clearance rates are more
important than the
finish. Make shallow
passes to avoid breakage,
ie depth of cut should
not exceed cutter
diameter..
Availability: In Stock
£11.19
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 22.0mm
7/8in.
cutting length 19mm
shank diameter:
1/4in.
Availability: In Stock
£11.65
Archived Product
-
Suitable for a wide range
of applications such as
engraving, grooving,
rebating and shallow
mortising. use on
softwoods, hardwoods,
mdf, plywood and
chipboard. all cutters
have a bottom cut
feature. Two fluted
tungsten carbide tipped
straight cutters which
are suitable for a wide
range of applcations such
a engraving, grooving,
rebating and shallow
mortising.
they can be used on a
wide range of materials
such as softwoods,
hardwoods, mdf, plywood
and chipboard.
all cutters have a bottom
cut feature.
when deep cuts are
required, more than one
pass should be taken.
shank. 1/4in
d - diameter - 25/64 in
10.0mm
c - cutting length -
3/4in 19.1mm
t.c.t.
2
flutes.
Availability: In Stock
£11.39
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 6.0mm
15/64in.
cutting length: 16mm.
shank diameter:
1/4in.
Availability: In Stock
£3.39
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 25.4mm
1in.
cutting length 25mm
shank diameter:
1/2in.
Availability: In Stock
£12.55
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters. Use
tungsten carbide tooling
when working with
abrasive materials such
as chipboard, mdf,
plywood and certain
hardwoods.
solid tungsten carbide.
1/4in shank.
two flute
straight.
Availability: In Stock
£29.55
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
extra long shanks for
deep grooving, rebating
and morticing.
useful for template work
when thickness of
template restricts depth.
extra care must be taken
to avoid breakage, take
more passes than usual
and only cut up to half
the diameter of the
cutter in one pass.
d = 12.7mm
c = 22mm
c2 = 32mm
ol =
95mm.
Availability: In Stock
£26.45
Archived Product
-
These types of cutters
are used for edging,
work and chamfer cutting,
on man made fibre
boards, natural timbers
and plastics. tools are
offered to produce
various angles for
chamfering. Ball bearing
and pin guarded cutters
enable curved work to be
undertaken, bearings
running along the board
edge or a template.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
t.c.t.
1/2in shank.
a = 45â°
c1 = 12 mm
c2 = 16 mm
d = 31.8 mm
b = 9.5
mm.
Availability: In Stock
£47.15
Archived Product
-
Two flute cutters with
extra long shanks for
deep grooving, rebating
and morticing. Useful for
template work when
thickness of template
restricts depth.
extra care must be taken
to avoid breakage, take
more passes than usual
and only cut up to half
the diameter of the
cutter in one pass.
t.c.t.
3/8in shank.
two
flute.
Availability: In Stock
£26.45
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
tungsten carbide cutting
edges and bearing guided,
making these trimmers
ideal for professional
and diy use. used when
trimming timber,
lippings and plastic
laminates.
type: flush trimmer 2
flute
cutting diameter: 6.3mm
1/4in
cutting length: 25.4mm
shank diameter:
1/4in.
Availability: In Stock
£4.69
Archived Product
-
These types of cutters
are used for edging,
work and chamfer cutting,
on man made fibre
boards, natural timbers
and plastics. tools are
offered to produce
various angles for
chamfering. Ball bearing
and pin guarded cutters
enable curved work to be
undertaken, bearings
running along the board
edge or a template.
typical trade
applications include sign
making, freehand
engraving, cabinet
making and decorative
joinery.
t.c.t.
1/2in shank.
a = 45â°
c1 = 19 mm
c2 = 26 mm
d = 51.5 mm
b = 12.7
mm.
Availability: In Stock
£61.15
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
c = 50 mm
d = 18 mm 45/64 in
ol =
92mm.
Availability: In Stock
£43.55
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters. Use
tungsten carbide tooling
when working with
abrasive materials such
as chipboard, mdf,
plywood and certain
hardwoods.
solid tungsten carbide.
1/4in shank.
two flute
straight.
Availability: In Stock
£24.89
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
t.c.t.
1/2in shank.
c = 25 mm
d = 12.7 mm
1/2in.
Availability: In Stock
£20.75
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 19 mm
d = 10 mm 25/64
in.
Availability: In Stock
£20.75
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use high speed
tooling when working with
softwoods such as pine.
h.s.s tooling
1/4in shank.
c = 28 mm
d = 6.3 mm 1/4
in.
Availability: In Stock
£11.39
Archived Product
-
Pin guided rounding over
cutters are ideal for
panel work and edge
mounting, all can be
used on natural timbers,
man-made particles and
fibre boards. Popular
uses include edging
window frames, glazing
bars, cabinets, table
tops, pencil rounds,
trophies, shelves and
fire surrounds. they can
also be used to produce
bullnose edge moulds.
small solid guide pins
can follow more intricate
shapes in contrast to
bearing guided cutters.
tooling :tc
1/4in shank.
d =22 mm
c =12.6 mm
r =1/4 inch
r = 6.3 mm
p
=9mm.
Availability: In Stock
£36.29
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 25 mm
d = 6.3 mm
1/4in.
Availability: In Stock
£19.69
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 25 mm
d = 15 mm
19/32in.
Availability: In Stock
£34.75
Archived Product
-
Bead cutters are ideally
suited to form straight
or curved decorative edge
mouldings on table tops,
chair legs and frames.
They can also be used to
produce complete round
over profiles for window
boards, and stair tread
nosings.
cutters can be combined
to form compounded
one-off mouldings for
individual applications.
tooling t.c.t.
1/4in shank.
r = 7 mm
d = 31.9 mm
d = 28.6 mm
b = 16
mm.
Availability: In Stock
£58.55
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 16 mm
d = 5 mm
13/64in.
Availability: In Stock
£19.19
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
t.c.t. tooling
1/2in shank.
c = 19 mm
d = 10 mm 25/64
in.
Availability: In Stock
£20.75
Archived Product
-
Bead cutters are ideally
suited to form straight
or curved decorative edge
mouldings on table tops,
chair legs and frames.
They can also be used to
produce complete round
over profiles for window
boards, and stair tread
nosings.
cutters can be combined
to form compounded
one-off mouldings for
individual applications.
tooling t.c.t.
1/2in shank.
r = 9.5 mm
d = 38.1 mm
d = 34.7 mm
b = 16
mm.
Availability: In Stock
£62.19
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
tungsten carbide cutting
edges and bearing guided,
making these trimmers
ideal for professional
and diy use. used when
trimming timber,
lippings and plastic
laminates.
cutting diameter: 6.3mm
1/4in
type: flush trimmer 2
flutes
cutting length: 12.7mm
shank diameter:
1/4in.
Availability: In Stock
£3.85
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 19 mm
d = 12 mm 15/32
in.
Availability: In Stock
£22.29
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
t.c.t. tooling
1/2in shank.
c = 37 mm
d = 12.7 mm 1/2
in.
Availability: In Stock
£28.50
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 19 mm
d = 8 mm
5/16in.
Availability: In Stock
£20.25
Archived Product
-
These cutters are
specifically designed for
producing rebates and
strip recesses. The pin
guides follow the
straight or curved
workedge to give a
pre-set width of rebate.
applications include
furniture and cabinet
making, picture frames,
door and window fames and
instrument making,
especially when a small
rebate is required for
insertion of purfling.
tooling: tc
1/4in shank.
c = 14 mm
p = 4.8 mm
e = 9.5
mm.
Availability: In Stock
£36.79
Archived Product
-
This cutter is self
guiding and can be used
to produce rebates,
lapjoints, tongues and
rebated corners.
Alternative bearings can
be purchased to vary the
rebate.
diameter. 35.0mm.
c = 12.7mm.
e = 11.1mm.
b = 12.7mm.
t.c.t.
1/4in
shank.
Availability: In Stock
£22.79
Archived Product
-
Pin guided ovolo and
rounding over cutters are
ideal for panel work and
edge mounting, all can
be used on natural
timbers, man-made
particles and fibre
boards. Popular uses
include edging window
frames, glazing bars,
cabinets, table tops,
pencil rounds, trophies,
shelves and fire
surrounds. they can also
be used to produce
bullnose edge moulds.
small solid guide pins
can follow more intricate
shapes in contrast to
bearing guided cutters.
tooling :t.c.t.
1/4in shank.
r = 9.5 mm
c = 16.5
mm.
Availability: In Stock
£43.55
Archived Product
-
Trend aquamac 63
recessing sets ref:330
and 331 are designed to
accommodate the popular
schiegel aquamac 63
weather strip system and
allows for a particularly
small gap between sash
and frame. The slot can
be positioned part way
down the side of the
rebate, or at the bottom
of the rebate.
ref 330 must be used with
a side fence, whereas
ref 331 comes complete
with a guide bearing to
reduce setting up time.
tct.
tooling: 1/2in shank
d1 = 41.3 mm
d2 = 28.3 mm
c1 = 4.8 mm
c2 = 2.7mm
b = 22 mm
ol = 67
mm.
Availability: In Stock
£95.89
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
t.c.t. tooling
1/2in shank.
t.c.t. tooling
1/2in shank.
c = 25 mm
d = 9.5 mm 3/8
in.
Availability: In Stock
£20.25
Archived Product
-
Designed to meet the
needs of both the
professional tradesman
and the home handyman.
All are tungsten carbide
tipped, to ensure
longevity of working
life, coupled with a
good quality finish to
the work.
this cutter is to be used
for bevelling and
chamfering.
cutting angle length c
13.0mm
overall diameter d 19.1mm
cutting angle 45 âº
shank diameter
1/4in.
Availability: In Stock
£5.09
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 25 mm
d = 12.7 mm
1/2in.
Availability: In Stock
£20.75
Archived Product
-
Two flute straight
cutters produce a cleaner
finish than the single
flute cutters and are
suitable for grooving,
rebating, mortising and
drilling. Use tungsten
carbide tooling when
working with abrasive
materials such as
chipboard, mdf, plywood
and certain hardwoods.
two flutes give a clean
finish to cut edges.
1/4in shank.
c = 19 mm
d = 7 mm 9/32
in.
Availability: In Stock
£19.69
Archived Product
-
Two flute mini trim
cutters are bearing
guided and designed to
profile intricate shapes.
Max 2.0mm trimming.
self guiding mini cutter
with bearings mounted for
trimming and bevelling
timber, lippings and
plastic laminate edges
for cabinet making,
countertop production or
any shaping applications.
bearing guided cutters
are suitable for both
straight and curved work,
bearings are normally
fractionally larger than
cutter diameter, to
avoid surface scoring.
uses:
trimming plastic or
plywood overlay.
copy profiling - use the
bearing to follow a
template or base edge of
board.
a 3mm approximate overlap
should be left before
copy profiling, also
when using plastic
laminate always allow
laminate adhesive to dry
before trimming. this
avoids clogging the guide
bearing.
tooling tungsten carbide
1/4in shank.
angle a = 90â°
d = 6.3 mm
c = 25.4
mm.
Availability: In Stock
£19.19
Archived Product
-
The manufacturing
specification for
faithfull router bit
cutters ensures that they
are suitable for use by
all professional
tradesmen, craftsmen and
conscientious diy
enthusiasts. Every
faithfull router cutter
tip is made from tungsten
carbide, brazed onto a
steel body and designed
to cut a wide variety of
timber and abrasive
material such as mdf and
plywood. with careful
handling and under normal
conditions, they will
outlast hss grade cutters
many times. these top
quality cutters will
ensure an excellent
finish and provide the
user with long lasting
and reliable service.
fitted with two tungsten
carbide cutting edges and
suitable for professional
or diy use. ideal for
grooving, rebating and
mortising when working on
mdf, softwoods and
hardwoods.
cutting diameter: 6.3mm
1/4in.
cutting length: 19mm.
shank diameter:
1/4in.
Availability: In Stock
£3.39
Denmark