Dewalt professional 3.6 volt screwdriver kit with the following features. A 3 position locking pivot operated from left or right and a gearbox diameter of only 40 mm for easy access to the tightest of working spaces with maximum user control two speed control and 8 torque settings ideal for screwdriving applications and pilot drilling pistol grip, soft grip handle and a rapid actuation switch for superior ergonomics and maximum user control in any working position quick release 6.35 mm magnetic collet for ease of use and convenience all metal gearbox, metal gearcase and robust xenoy tool housing tough enough for the professional workplace optimised working range in lower power applications upto 6nm for when it is a priority not to damage the screwhead or workpiece or where it is critical not to overtighten fixings led light operated by an independent switch for visiblity in tight working spaces specifications voltage: 3.6 v tool holder: (hex) 6.35 mm battery: nicd 1.2 ah power output: n/a watts no load speed: 200/600 rpm max torque: 6 nm weight: 0.7 kg length: 300 mm height: 65 mmincludes 1 hour charger, 1 battery, screwdriver bit.
Bosch cordless straight screwdriver psr 2.4 v 2.4 v. the ideal solution for work in tight spaces. 4 folding positions for screwdriving in any position. Forward/reverse rotation for inserting/removing screws. Integrated lamp for screwdriving in dark areas. Automatic spindle lock for manual tightening of screws. Comes with: charger, 11 screwdriver bits and magnetic extension bit holder.. technical data:
screw diameter up to: 5 mm.
no-load speed: 130 rpm.
max. torque: 3 nm.
battery voltage: 2.4v.
charging time: 5 h.
chucks: bit holder with hexagonal shank.
machine weight: 400g. image 2: 4 folding positions. image 3: screwdriving work in any position.
This screwdriver features: expert quality.
12 position torque control.
reversing facility.
integral twin led work light. Supplied complete with: 20 x 1/4" insert bits, 9 x 1/4" sockets, socket adaptor, bit holder, blow mould carrying case, 3.6v integral battery pack and 230v ac 3-5 hour charger with bs 3 pin plug. specification: speed (no load): 200r/min. weight: 600g.
The tool is unique as it combines a powerful impact driver and collated autofeed driver in one. the tool offers distinct advantages over other impact drivers and collated autofeed tools. A large part of the cost of any power tool is the batteries and the concept driver is supplied with 2 x 2.4ah sanyo nicd batteries which are far superior to chinese or metal hydride batteries found on many tools. it also means that builders do not have to go to the expense of additional or replacement batteries as the two batteries alone are enough for most.
as an impact driver alone the 167nm of power of this tool sets it apart from the rest which are mostly 125nm to 140nm. the collated autofeed takes 25-50 mm collated screws and will take upto 55mm. the attachment is easy to operate using an allan key to take on and off and set the gauge to length of screws being used, and a simple dial controls countersink management. the attachment can be set to feed from the top or sides and concept do not require that the builder use our collated screws unlike other companies. concept do however recommend that a quality strip is used so that the tool operates at optimum speed and there is less chance of jamming etc.
specification 14.4 volt 167 nm power (approx 20-25% more than equivalent 14.4v impact drivers ) 2300 rpm / 3000 bpm forward / reverse electric brake variable speed control led lights 2 x 2.4 sanyo ni-cd batteries 1 hour intelligent fast charger attachment suitable for screws 25, 32, 35, 38, 42, 45, 50 mm countersink control dial quick and easy to fit and remove attachment rubber end piece for paper protection x 2 belt track for stability release button for easy removal of strips autofeed positions screw before driving so less chance of jamming attachment can be fitted to feed from top or side 2 x extended phillips bits carry case 1 year warranty weight approx 2.9 kg product code: 210020.
Dewalt heavy-duty two position screwdriver/drill with the following features. - hinged handle with position lock for two grip positions (in- line and pistol grip). - 15 position adjustable torque control for consistent screwdriving into a variety of material with different screw sizes. - variable speed and reverse switch for added versatility. - electronic motor brake for better control. - heavy-duty quick release chuck. - long life 20 amp switch with large aluminium heat sink for better heat dissipation and greater durability. supplied with: - 1 hour charger - 1 x 1.3ah nicd battery - heavy-duty carrying case specification: voltage: 7.2 volts power output: 125 watts no load speed: 0-500 rpm maximum torque: 10 nm weight: 1kg length: 355mm.