Formerly scalex by purimachos. Everbuild p12 noise silencer is a non-acid based de-scaler which stays permanently in the system with no need to drain or flush. p12 noise silencer helps to prevent knocking and kettling caused by lime scale and sludge build up. *removes scale and baked on sludge deposits. *prevents scale from reforming. *compatible with all everbuild central heating products. *restores heating efficiency to extend the life of the boiler. *new and existing central heating systems. *extensions to existing systems.
P16 pvc pipe cement is a non-drip, thixotropic solvent based pipe cement for use with non-pressure pvc and abs thermoplastic pipes and conduits p16 pvc pipe cement combines a long open time with a rapid rate of bond strength development. conforms to bs26209. The product is designed specifically for the following: bonding upvc and abs non-pressure pipes to themselves and each other, i.e. upvc soil and ventilating pipes, fittings, and accessories conforming to bs4514; upvc rainwater piping/goods conforming to bs4576; upvc underground drainpipes and fittings bs4660; abs or upvc waste pipes and fittings conforming to bs55255.
Formerly leakex by purimachos. Everbuild p13 leak sealer is an internal leak sealer which when applied to a system can help to avoid costly repairs. p13 leak sealer can be used for small leaks and weeping joints in most central heating systems. *will not block pumps or air vents. *compatible with all everbuild central heating products. *forms a soft seal within 24 hours of entering the primary circuit. *new and existing central heating systems. *extensions to existing systems.
Formerly protex by purimachos. Everbuild p14 system inhibitor is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion. *wras approved formulation. *buildcert performance standard *compatible with all everbuild central heating products. *does not contain mineral oil. *compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium. *suitable for microbore systems constructed from plastic pipes. *new and existing central heating systems. *extensions to existing systems.
P19 super concentrate silicone spray is a multi-purpose dry lubricant, ideal for use in the plumbing industry. It is ideal for use in easing the installation of all types of plastic joints and threads, inserting rubber gaskets and o rings and has many uses around the home, garage, workshop and industry. the advanced silicone formula eases friction between any two surfaces and also stops squeaks. * meets bs6920 for use with drinking water. *high performance ptfe lubricant. *non staining. *corrosion resistant. *reducing friction between two surfaces. *as a high quality mould release agent. *eliminates squeaks. *inserting gaskets, seals and o rings.
P18 gas leak detector is a specially formulated micro porous foam designed specifically to identify even the smallest, gaseous leak. it is suitable for use with most gases and is compatible with paintwork, metals, wood and most plastics. This product is designed to be used to trace costly and potentially dangerous gas leaks *suitable for most gas types. *fast and easy to apply. *cfc free. *directional tube for hard to reach places. *detecting leaks in pressurised pipe systems. *suitable for use with most gas types including natural and town gas, compressed air, butane, propane, acetylene, chlorine gas, hydrogen and oxygen.
Everbuild p17 pipe freeze is a specially formulated blend of freezing agents that can be used to freeze the water in pipes to enable repair work. *freezes down to -500c *no need to drain or switch off system. *will not damage pipes or joints. *quick and effective. *freezing pipes in heating systems to enable quick repair work. *ideal for use in electronic testing. *for shrinking metal parts. *as a refrigerant spray. *helps to remove chewing gum.
Pipeseal ptfe liquid. Ptfe liquid is a flexible setting pipe sealant for metallic threaded pipes. designed primarily for air, water and steam, it can be used in the place of ptfe tape and many applications. suitable for pressures up to 28 bar (400psi) flexible hard setting seal resists thermal expansion temperature range -50âºc to +250âºc size. 300grm tin with brush (liquid).
Gas seal. Off-white sealant for use on metallic threaded joints including aluminium, copper, steel and zinc compatible with low pressure lpg and natural oils vibration resistant independently tested to bsen 751-2:1997 part 2 class b temperature range -20âºc to + 125âºc.
Specially formulated for the plumbing professional, plumbers gold is a new type of sealant and adhesive based on stpa* polymer technology that offers outstanding adhesion to all sanitary, bathroom, wetroom, kitchen and plumbing materials such as hard plastics, acrylics, fibreglass, ceramics, glass, marble, granite, aluminium, mirrors, metals etc. Plumbers gold can be applied to wet surfaces, will even work underwater, and contains microban, ** the worlds leading branded anti-bacterial solution integrated into the manufacturing process, preventing black mould, bacterial growth and discolouration for 10 years. no mould 10 year guarantee if plumbers gold discolours or stains due to mould growth within 10 years of application simply return pack or receipt of purchase to everbuild and we will refund your purchase and postage costs.mcaution: this guarantee is only valid providing regular cleaning has been carried out, microban helps prevent the growth of mould, mildew and bacteria that can stain and degrade silicone, however it is not a substitute for regular cleaning as excessive deposits of soap can cause secondary mould growth. nothing in this statement does or will affect your statutory rights. excellent primerless adhesion to most common bathroom substrates including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc etc high bonding strength, yet flexible enough to cope with common sealing applications interior and exterior use can be applied to wet surfaces and underwater! totally waterproof & weatherproof overpaintable if required powerful anti fungal and antibacterial agents prevent mould and bacterial growth - guaranteed for 10 years! solvent free resistant to temperature extremes -40â°c to +150â°c non staining on sensitive materials, marble / granite permanently flexible - 20% movement accommodation. resistant to chemicals & petrol (10% dilute acids/alkalis, most solvents) excellent primer less adhesion to most surfaces, sealing and bonding in almost every plumbing application imaginable. the following are just some examples. sealing soil and vent pipes. sealing and bonding waste pipes. sealing and bonding wc pans. setting waste traps and grates into sinks, showers, baths etc. all conventional sealing around baths, showers, sinks, tiled areas etc. as an adhesive to bond shower frames, mirrors and ceramic ware to walls, including tiled surfaces. as a thread seal. sealing and bedding extractor fans. sealing and bonding in areas subject to continuous water immersion. permanently fixing small leaks. sealing and bonding around tap bases. bonding shower trays to floors and walls. as a mirror adhesive .
Foliac manganese pjc. Dark grey hard setting but flexible, compound for pipes, flanges and face joints. hard settings compound efficient sealing to 193 bar (2800 psi) high and low pressure steam, water, air and gas temperature range of -20âºc to 600âºc 400g.
Leak detector spray. Specially formulated aerosol for the rapid detection of positive pressure gas leaks. tested to ensure plastic and copper pipe compatibility. suitable for use with most positive pressure gases. 360âºc valve for use in difficult to reach areas. for use by corgi registered gas installers. 300g.
Everbuild p14 system inhibitor concentrate is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion. *wras approved formulation. *buildcert performance standard *compatible with all everbuild central heating products. *does not contain mineral oil. *compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium. *suitable for microbore systems constructed from plastic pipes. *new and existing central heating systems. *extensions to existing systems.
Everbuild p11 system cleanser concentrate will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge. p11 system cleanser should also be used when components are replaced or existing systems are extended. *compatible with plastic tanks, micro bore and all metals (including aluminium) used in central heating systems. *economical 1ltr will treat a 100ltr system capacity. *new and existing central heating systems. *extensions to existing systems. *remedial cleansing when components are replaced.
Formerly flushex by purimachos. Everbuild p11 system cleanser will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge. p11 system cleanser should also be used when components are replaced or existing systems are extended. *compatible with plastic tanks, micro bore and all metals (including aluminium) used in central heating systems. *economical 1ltr will treat a 100ltr system capacity. *new and existing central heating systems. *extensions to existing systems. *remedial cleansing when components are replaced.
Super red pjc. Hard setting pipe jointing compound for high pressures and sealing of threads and face connections. effective sealing for oils and petroleum products resists vibration and thermal changes suitable for petrol, diesel and mineral oils size. 375grm screw top tin.
Specially formulated for the plumbing professional, plumbers gold is a new type of sealant and adhesive based on stpa* polymer technology that offers outstanding adhesion to all sanitary, bathroom, wetroom, kitchen and plumbing materials such as hard plastics, acrylics, fibreglass, ceramics, glass, marble, granite, aluminium, mirrors, metals etc. Plumbers gold can be applied to wet surfaces, will even work underwater, and contains microban, ** the worlds leading branded anti-bacterial solution integrated into the manufacturing process, preventing black mould, bacterial growth and discolouration for 10 years. no mould 10 year guarantee if plumbers gold discolours or stains due to mould growth within 10 years of application simply return pack or receipt of purchase to everbuild and we will refund your purchase and postage costs.mcaution: this guarantee is only valid providing regular cleaning has been carried out, microban helps prevent the growth of mould, mildew and bacteria that can stain and degrade silicone, however it is not a substitute for regular cleaning as excessive deposits of soap can cause secondary mould growth. nothing in this statement does or will affect your statutory rights. excellent primerless adhesion to most common bathroom substrates including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc etc high bonding strength, yet flexible enough to cope with common sealing applications interior and exterior use can be applied to wet surfaces and underwater! totally waterproof & weatherproof overpaintable if required powerful anti fungal and antibacterial agents prevent mould and bacterial growth - guaranteed for 10 years! solvent free resistant to temperature extremes -40â°c to +150â°c non staining on sensitive materials, marble / granite permanently flexible - 20% movement accommodation. resistant to chemicals & petrol (10% dilute acids/alkalis, most solvents) excellent primer less adhesion to most surfaces, sealing and bonding in almost every plumbing application imaginable. the following are just some examples. sealing soil and vent pipes. sealing and bonding waste pipes. sealing and bonding wc pans. setting waste traps and grates into sinks, showers, baths etc. all conventional sealing around baths, showers, sinks, tiled areas etc. as an adhesive to bond shower frames, mirrors and ceramic ware to walls, including tiled surfaces. as a thread seal. sealing and bedding extractor fans. sealing and bonding in areas subject to continuous water immersion. permanently fixing small leaks. sealing and bonding around tap bases. bonding shower trays to floors and walls. as a mirror adhesive.
Hylomar jointing compound. A non-setting jointing compound for flanged joints. forms a permanent but flexible seal that resists vibration and thermal expansion. non-setting, non-hardening sealant resists vibration & thermal expansion suitable for pressures up to 35 bar (500psi) temperature range of -50âºc to 200âºc 100g tube.
P15 white pipe jointing compound is designed for use on pipework carrying cold/hot water and low pressure saturated steam. it can be used for sealing screwed metallic joints up to 50mm wide from the ingress or egress of fluids. p15 white pipe jointing compound acts as a lubricant, which helps threads to be screwed up tightly. *non toxic formula. *easy to apply soft paste. *acts as a lubricant to assist tightening of threads.
*all common types of metallic thread. *hot/cold water pipes. *low pressure saturated steam pipes.
The versatile super absorbent sheet. The quick, easy and effective way to clean up all water based spillages in the home or workplace. ideal for : plumbing emergencies and repairs dripping radiators radiator and pump removals leaking pipes, toilets and basins overflow leaks in roof tanks leaking hot water tanks fridge and freezer defrosting large floor spillage protection for carpets and floors no drips, no mess, no stains water is locked in and cannot be squeezed out, unlike a sponge material safety data sheet available from www.monument-tools.com instructions mopitupâ® will only absorb water based fluids. do not to be used on oil or chemical based fluids. do not cut or pierce the mopitupâ® before or after use as the gel or absorbed water will spill out. do not tread on the mopitupâ® as it will be a slip hazard. do not eat or ingest the mopitupâ®. can be used until it is full; beyond its capacity water will run out and it will then drip. warm water works faster, cold water slower but all water will be absorbed. mopitupâ® is designed for a slow steady trickle, not 2 litres tipped straight on it , or water will splash off. very strong contaminated water with rust or heavy sewage and the take up will be slightly less; just use another one! the mopitupâ® can be placed onto spilt water by turning it so the plastic side is upper most and the net is towards the water spill. the mopitupâ® can be placed into water containers and will insuckin out the water i.e. draining cisterns, drains, holes. the gel is non toxic and safe (but note that the contents are only safe not the additive contaminant). disposal recommended disposal in land fill /builders skip/standard house waste.
The very best and safest way to prepare copper pipe and copper fittings. long lasting double stemmed brushes clean quickly. quick thorough tubing prep with patented tungsten carbide abrasive technology. works 3 times faster and lasts 4 times longer than conventional tools. Patented ratchet handle makes jobs possible in all tight spaces. eliminates the risk of scrapes or flux burns. size 15mm.
The very best and safest way to prepare copper pipe and copper fittings. long lasting double stemmed brushes clean quickly. quick thorough tubing prep with patented tungsten carbide abrasive technology. works 3 times faster and lasts 4 times longer than conventional tools. Patented ratchet handle makes jobs possible in all tight spaces. eliminates the risk of scrapes or flux burns. size 22mm.