United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Hand Tools > Levels & Spirit Levels
Archived Product
-
The level-mate has a
strong foam based
polystyrene body with
an 'i' profile which is
lightweight yet tough,
strong and rigid. There
are two vials, a fixed
vertical plumb vial and
an adjustable luminous
magnifying horizontal
vial.
length: 600mm/24in.
Availability: In Stock
£11.05
Archived Product
-
120cm/48" level suitable
for both trade and the
serious diy'er. 30 years
vial guarantee. Smooth
aluminium profile. silver
anodized finish. The
vials are electronically
adjusted and fixed and
ultrasonically welded
into level. break and
shock proof tube vials.
Magnified vials. 2 vials
- 1 horizontal, 1
vertical. Horizontal vial
has additional markings:-
horizontal line and 2%
slope at a glance.
Measuring accuracy in
normal position 0.5mm/m.
Availability: In Stock
£24.50
Archived Product
-
The veritas square level
attaches to a steel
square (steel rule,
i-beam, etc.) with
integral rare-earth
magnets. Has a vertical
slot with an integral
clamp to hold a ruler 1"
to 1-1/8" wide and up to
1/16" thick. May be used
to measure rise and run
of just about anything.
May be used to lay out
sloping cuts on drywall
or to fit molding next to
a stair stringer. made of
extruded and machined
aluminum; fittings are
brass. Bubble level is
accurate; bubble movement
of 1/16" represents
angular change of half a
degree. Weighs less than
3 oz.
Availability: In Stock
£21.40
Archived Product
-
Extremely accurate angle
calculation. faster,
more precise and more
efficient calculation of
angles. precise
transfer of the angles
onto workpieces. the
greatest accuracy over
the long term due to the
integrated, wear-free
and
temperature-independent
bosch precision angle
sensor. features:
2 easy-to-read displays
on the front and back. no
calibration required.
hold function to hold
measurement results at
the push of a button.
sturdy and compact. in a
set with arm extension
for measuring on short
contact surfaces and in
hard-to-reach areas.
comes with: 4 x
1.5 v batteries.
Availability: In Stock
£137.95
Archived Product
-
As with type 81s or 81sm
but with additional angle
vial either pre-set or
adjustable to report an
angle. the model with
v-grooved base also
includes the special 6
ring vial for marking 1%
and 2% slopes for soil or
waste pipe installation.
Measurement accuracy:
0.029â° = 0.5mm/m
for overhead
measurements: 0.043â° =
0.75mm/m
type 81sremw45 –
45â° vial, v grooved
base & rare earth magnets
type 81svw360 - 360â°
vial, v grooved base &
rare earth magnets
scaffold level in
die-cast light alloy
electrostatically
powder-coated body with
end impact protection
lugs to prevent
deformation of the milled
measuring surfaces in the
event of impact and two
super strong rare earth
magnets.
milled measuring surface
with a v groove and rare
earth magnets for extra
secure adhesion to pipes
and other steel items.
six ring vial for 1 % and
2 % slopes
fixed 45â° vial for
direct checking of struts
and pipes at 45â°.
3 vials: 1 vertical
1 horizontal
1 angled (45deg)
length:
10in.
Availability: In Stock
£47.45
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
3-vials - the horizontal
vial to be viewed from
4-sides and the vertical
vials from 3-sides.
accuracy: +/-0.5mm/m in
normal and overhead
positions.
length.600mm
(24in).
Availability: In Stock
£71.05
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£74.55
Archived Product
-
This levels distinctive
shape shows that it is a
special type. it is made
from pressure-cast light
metal and its slim,
bevelled shape makes it
suitable for working in
cramped spaces. Pressure
die-cast frame 1 milled
measuring face. 1
vertical, 1 horizontal
vial for normal and
upside down measuring.
protecting noses to
prevent damage to milled
face.
a very popular level with
scaffolders.
accuracy. 0.5mm/m normal
position.
0.75mm/m upside down
position.
length.800mm
(32in).
Availability: In Stock
£71.15
Archived Product
-
The designer angle finder
level is quick and
easy-to-use with a
heavy-duty girder
profile. Its angle
finding vial rotates
fully through 360â°,
with a constant pressure
spring for easy
adjustment.
ideal for fast setting of
falls on drainpipes,
paving and roofing.
this level has an
accuracy of 1mm/m. (0.057
in standard position).
size
48in/1200mm.
Availability: In Stock
£26.20
Archived Product
-
Extruded aluminium girder
section level with
overall epoxy polyester
coated finish to resist
abrasion and enable
easycleaning. The third
vial is an angle setter
which can be rotated and
locked to any angle up to
360âº.
accuracy isto +/- 1mm per
metre.
overall length: 600mm /
24in.
Availability: In Stock
£11.29
Archived Product
-
Stanley fatmax i beam
level has
solid-block vials to
provide an accuracy of
0.5mm/m in eight
orientations. plus every
fatmax level comes with
a lifetime accuracy
warranty. It is 2 x
stronger than other
stanley levels thanks to
its unique reinforced
box-beam construction.
lightweight body and
rule scale for ease of
marking out, also a
handgrip make handling
easy and the precision
engineered,
dual-machined levelling
surfaces ensure maximum
accuracy.
the 3 vials are
magnified by for
improved all round
visibility with shock
absorbing end caps
protect the level even if
it's dropped.
length 600mm (24 in)
.
Availability: In Stock
£15.19
Archived Product
-
Extruded aluminium girder
section level with
overall epoxy polyester
coated finish to resist
abrasion and enable
easycleaning. The third
vial is an angle setter
which can be rotated and
locked to any angle up to
360âº.
accuracy isto +/- 1mm per
metre.
Availability: In Stock
£7.65
Archived Product
-
Manufactured from
heavy-duty ribbed
aluminium alloy box
section. Fitted with
three factory set acrylic
block vials, 2 vertical
and one horizontal,
guaranteed against
leakage and breakage for
5 years.
fitted with shock
absorbing end caps.
ground on top and bottom
working faces.
accuracy in normal
working position is â±
0. 5mm/m and in the
reverse position â± 0.
7mm/m.
size.1000mm /
40in.
Availability: In Stock
£18.95
Archived Product
-
The designer angle finder
level is quick and
easy-to-use with a
heavy-duty girder
profile. Its angle
finding vial rotates
fully through 360â°,
with a constant pressure
spring for easy
adjustment.
ideal for fast setting of
falls on drainpipes,
paving and roofing.
this level has an
accuracy of 1mm/m. (0.057
in standard position).
size
24in/600mm.
Availability: In Stock
£17.79
Archived Product
-
Manufactured from
heavy-duty ribbed
aluminium alloy box
section. Fitted with
three factory set acrylic
block vials, 2 vertical
and one horizontal,
guaranteed against
leakage and breakage for
5 years.
fitted with shock
absorbing end caps.
ground on top and bottom
working faces.
accuracy in normal
working position is â±
0.5mm/m and in the
reverse position â±
0.7mm/m.
size.
600mm/24in.
Availability: In Stock
£15.15
Archived Product
-
The stanley fatmax i beam
magnetic level range
provides the ultimate in
terms of overall strength
and performance. They are
fitted with solid block
acrylic vials that have
been machined to exacting
tolerances to ensure that
the movement of the
bubble is smooth and
comes to rest quickly.
the stanley fatmax i beam
magnetic level range
have a small magnifying
area in the centre which
makes reading the
position of the vial
easier.
it has rubber end caps
which protect the level
against damage if dropped
and a curved body profile
which allows the level to
be used for gradients on
drainage and pipe work.
the stanley fatmax i beam
magnetic level 1-43-556
is 1200mm (48 in) in
length.
Availability: In Stock
£26.00
Archived Product
-
High impact shock proof
level with a rigid
aluminium frame and shock
resistant rubber ends.
Features: v groove edge
ideal for pipe work,
magnetic strip ideal for
scaffolding, 3 lighted
vials controlled by a on
/ off button with auto
shut off makes reading
the 3 vials easy.
type: torpedo / scaffold
level
vials: 3
length:
230mm.
Availability: In Stock
£16.65
Archived Product
-
The stanley fatmax i beam
magnetic level range
provides the ultimate in
terms of overall strength
and performance. They are
fitted with solid block
acrylic vials that have
been machined to exacting
tolerances to ensure that
the movement of the
bubble is smooth and
comes to rest quickly.
the stanley fatmax i beam
magnetic level range
have a small magnifying
area in the centre which
makes reading the
position of the vial
easier.
it has rubber end caps
which protect the level
against damage if dropped
and a curved body profile
which allows the level to
be used for gradients on
drainage and pipe work.
the stanley fatmax i beam
magnetic level 1-43-558
is 2000mm (78 in) in
length.
.
Availability: In Stock
£41.19
Archived Product
-
The tvp magnet torpedo
spirit level is an
impact-resistant spirit
level in yellow abs
plastic that withstands
temperatures between
–15â°c and
+60â°c. it has
unbreakable block vials
with extremely high
transparency and
durability. the vial
radius is 150mm, which
gives a sensitivity of
13mm/m and a tolerance in
normal position â±
1.5mm/m. the vial fluid
is a low viscosity,
coloured oil mixture that
gives the bubble the best
possible conditions for
movement and is resistant
to ultraviolet light and
temperature fluctuations.
the bubble is not
affected by static
electricity as the fluid
is anti-static.
Availability: In Stock
£8.40
Archived Product
-
This specialist level is
designed to ensure fence
posts are upright prior
to fixing. other uses
include plumbing pipes,
levelling of rsjs and
other applications where
a vertical and horizontal
is needed. The durable
plastic angle plate has 2
acrylic horizontal vials
and 1 vertical vial that
are accurate to 1.75 mm
per 1m = 0.1â°.
there are 2 fixing
methods:
1. elastic strap for
non-magnetic surfaces.
2. magnetic base for use
on rsjs and steel fence
posts.
size: 140 x 90 x 90
mm.
Availability: In Stock
£2.99
Archived Product
-
The tvp torpedo spirit
level is an
impact-resistant spirit
level in yellow
polystyrene plastic that
withstands temperatures
between -15â°c and
+60â°c. it has
unbreakable block vials
with extremely high
transparency and
durability, the
horizontal vial has a
luminous reflector, also
this level has a v groove
in the bottom to enable
use on pipes. The vial
radius is 200mm, which
gives a sensitivity of
10mm/m and a tolerance in
normal position â±
1.0mm/m. the vial fluid
is a low viscosity,
coloured oil mixture that
gives the bubble the best
possible conditions for
movement and is resistant
to ultraviolet light and
temperature fluctuations.
the bubble is not
affected by static
electricity as the fluid
is anti-static.
Availability: In Stock
£10.15
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m.
box of 10 levels.
Availability: In Stock
£299.09
Archived Product
-
Post level unique tool to
plumb pipes, posts,
levelling rsjs and
other applications where
vertical or horizontal is
required. The hinged body
opens to any angle and
allows use on square,
round and hexagonal
posts, as well as
girders (rsjs). Dual
fixing - elastic straps
for non magnetic surfaces
and magnets for steel
fence posts, rsjs,
etc. Plastic construction
with acrylic vials.
Accuracy 1.75mm per 1m =
0.1°. Manufactured for
draper tools by kapro.
Display packed..
Availability: In Stock
£6.09
Archived Product
-
High impact shock proof
level with a rigid
aluminium frame and shock
resistant rubber ends.
Features: v groove edge
ideal for pipe work,
magnetic strip ideal for
scaffolding, 3 lighted
vials controlled by a on
/ off button with auto
shut off makes reading
the 3 vials easy.
type: torpedo / scaffold
level
length: 230mm.
Availability: In Stock
£11.75
Archived Product
-
Extruded aluminium girder
section level with
overall epoxy polyester
coated finish to resist
abrasion and enable
easycleaning. The third
vial is an angle setter
which can be rotated and
locked to any angle up to
360âº.
accuracy isto +/- 1mm per
metre.
overall length.1200mm /
48in.
Availability: In Stock
£16.09
Archived Product
-
Superior quality masons
level with plastic shield
to protect the level
against hits with a
trowel. The second
vertical vial is
positioned closer to the
center of the level for
better readability in
lower positions.
easy to clean due to
chamfered edges and new
vial plastic parts.
extra-strong profile with
ribs and reinforced upper
and lower side for daily
use on the construction
site.
high-precision vials are
firmly moulded in place
to ensure complete
accuracy.
other features include:-
removeable endcaps for
difficult-to-reach
corners, anti-slip
stoppers for convenient
marking of walls.
length:
100cm.
Availability: In Stock
£68.95
Archived Product
-
The flagship of the bmi
range- a professional
level available from
40cm/16" up to 240cm/96".
12 year vial guarantee.
The vials are
electronically adjusted
and fitted and
ultrasonically welded
into level. horizontal
spirit level indicator
with magnification effect
for the best readability
properties. 3 vials - 1
horizontal with
magnifying effect, 2
vertical. Measuring
accuracy in normal
position and for overhead
measurements 0.5mm/m.
Domed, replaceable,
shock absorbing rubber
end caps. extremely
resistant to torsion due
to 4 chamber profile.
Distinctive orange powder
coating. 2mm thick
aluminium profile. box
section 60 x 26mm.
Availability: In Stock
£38.95
Archived Product
-
Light metal rectangular
profile with removable
end caps, 2 vertical and
1 horizontal vial. With
rare earth magnet system.
measurement accuracy:
in normal position:
0.029â° = 0.5 mm/m
overhead measurement
0.043deg = 0.75mm/m
extra strong, light
metal rectangular profile
with ridges for gripping
and novel removable end
caps
made from two materials.
these end caps provide
increased damping and,
when removed, a cleaner
marking line right into
the corner.
length: 100cm /
40in.
Availability: In Stock
£97.89
Archived Product
-
Stabila 80am series
magnetic levels. Strong
and light profile for
everyday use.
one milled
Availability: In Stock
£46.99
Archived Product
-
20m water level expert
quality, ideal for
blind, room to room
measurements and for
checking
Availability: In Stock
£23.49
Archived Product
-
Extra strong light metal
rectangular profile with
gripping ridges
andremovable end caps
made from two materials.
The removable end caps
are also equipped with
well-proven patented
anti-slip stops.
2 milled measuring
surfaces, 2 vertical
vials and 1 horizontal
vial.
measurement accuracy: in
normal position 0.029â°
= 0.5 mm/m: overhead
measurement 0.043â° =
0.75 mm/m.
pack contains
96-2 120cm/48in 3 vial
level
96 30cm level
folding rule
keyring level
3 x carpenters
pencils.
Availability: In Stock
£127.45
Archived Product
-
The designer angle finder
level is quick and
easy-to-use with a
heavy-duty girder
profile. Its angle
finding vial rotates
fully through 360â°,
with a constant pressure
spring for easy
adjustment.
ideal for fast setting of
falls on drainpipes,
paving and roofing.
this level has an
accuracy of 1mm/m. (0.057
in standard position).
size 12in/300mm.
3
vials.
Availability: In Stock
£12.49
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£44.60
Archived Product
-
Stabila 80am series
magnetic levels. Strong
and light profile for
everyday use.
one milled
Availability: In Stock
£53.49
Archived Product
-
Professional quality
level with electronic
inclinometer, ideal for
carpenters, joiners,
kitchen builders,
metalworkers,
formworkers,
construction engineers,
pipe fitters and many
more. Inclinometer:
- dual display for
accurate easy reading of
inclinations in all
positions. a second
display located in the
upper surface for easier
reading of the measured
value
- angle indication in
degrees, percentage,
mm/m, in/ft.
- accoustic signal for
horizontal and vertical
measuring.
- automatic switch off
can be selected after
10min or 2 hours.
spirit level:
- extra long ribbed
profile providing a high
resistance to deformation
during everyday use on
site.
- permanently moulded
precision vials for
overhead reading - no
readjustment required.
- removeable endcaps for
measuring flush into
corners.
- special coating to
protect level against
dirt.
- ruberised handholes for
easier handling.
technical specification:
measuring accuracy of
electronic module @ 0âº
and 90⺠0.05âº
@ 1⺠and 89âº
0.2âº
measuring accuracy of
spirit level
in normal position:
0.029⺠= 0.5mm/m
in upside down position
0.029⺠= 0.5mm/m
power supply: 2 x aaa
batteries
length: 80cm
carry bag
included.
Availability: In Stock
£208.79
Archived Product
-
Easy to handle,
lightweight shock
resistant level with top
read vial for easy
readability. Will not
dent like aluminium
levels.
ideal for use on finished
surfaces (non-marking)
measuring scale for multi
tasks.
made from high impact abs
plastic.
3 vials (0-90⺠-
45âº)
length. 24in
(60cm).
Availability: In Stock
£5.89
Archived Product
-
Easy to handle,
lightweight shock
resistant level with top
read vial for easy
readability. Will not
dent like aluminium
levels.
ideal for use on finished
surfaces (non-marking)
measuring scale for multi
tasks.
made from high impact abs
plastic.
3 vials (0-90⺠-
45âº)
length.18in.
(45cm).
Availability: In Stock
£4.89
Archived Product
-
The stanley fatmax i beam
magnetic level range
provides the ultimate in
terms of overall strength
and performance. They are
fitted with solid block
acrylic vials that have
been machined to exacting
tolerances to ensure that
the movement of the
bubble is smooth and
comes to rest quickly.
the stanley fatmax i beam
magnetic level range
have a small magnifying
area in the centre which
makes reading the
position of the vial
easier.
it has rubber end caps
which protect the level
against damage if dropped
and a curved body profile
which allows the level to
be used for gradients on
drainage and pipe work.
the stanley fatmax i beam
magnetic
level 1-43-554 is 600mm
(24 in) in length.
.
Availability: In Stock
£17.89
Archived Product
-
Light metal rectangular
profile with removable
end caps, 2 vertical and
1 horizontal vial. With
rare earth magnet system.
measurement accuracy:
in normal position:
0.029â° = 0.5 mm/m
overhead measurement
0.043deg = 0.75mm/m
extra strong, light
metal rectangular profile
with ridges for gripping
and novel removable end
caps
made from two materials.
these end caps provide
increased damping and,
when removed, a cleaner
marking line right into
the corner.
length: 60cm /
24in.
Availability: In Stock
£62.90
Archived Product
-
Extra strong light metal
rectangular profile with
gripping ridges
andremovable end caps
made from two materials.
The removable end caps
are also equipped with
well-proven patented
anti-slip stops.
2 milled measuring
surfaces, 2 vertical
vials and 1 horizontal
vial.
measurement accuracy: in
normal position 0.029â°
= 0.5 mm/m: overhead
measurement 0.043â° =
0.75 mm/m.
length. 96in-244cm
vials.
3.
Availability: In Stock
£108.19
Archived Product
-
The designer angle finder
level is quick and
easy-to-use with a
heavy-duty girder
profile. Its angle
finding vial rotates
fully through 360â°,
with a constant pressure
spring for easy
adjustment.
ideal for fast setting of
falls on drainpipes,
paving and roofing.
this level has an
accuracy of 1mm/m. (0.057
in standard position).
size.
36in/900m.
Availability: In Stock
£22.45
Archived Product
-
Fatmax torpedo level (3
vial). Die-cast aluminum
body, solid block vials,
vials accuracy of 0,
5mm/m, rare earth
magnets, pipe groove
provides maximum
durability, for faster
and more accurate
readings, for ultimate
holding power, for use
on rounded surfaces, 5
year accuracy guarantee.
Availability: In Stock
£17.09
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£34.79
Archived Product
-
The stabila 90-2
heavy-duty level is made
from strong but
lightweight metal alloys
and features soft ribbed
reinforcements that make
the level easier to
handle and improve
strength. It has two
vertical vials which
ensures accurate
measuring, the level
also has a single
horizontal vial. this
horizontal vial has a
viewing angle of up to
300â° and can also be
used for overhead
measurements by turning
the level upside down.
the level is also fitted
with impact resistant end
caps that provide good
shock-absorption in the
event that the level is
dropped.
Availability: In Stock
£24.75
Archived Product
-
Bmi 698 professional
60cm/24" robust level 3
vial. the flagship of the
bmi range- a professional
level available from
40cm/16" up to 240cm/96".
12 year vial guarantee.
The vials are
electronically adjusted
and fitted and
ultrasonically welded
into level. horizontal
spirit level indicator
with magnification effect
for the best readability
properties. 3 vials - 1
horizontal with
magnifying effect, 2
vertical. Measuring
accuracy in normal
position and for overhead
measurements 0.5mm/m.
Domed, replaceable,
shock absorbing rubber
end caps. extremely
resistant to torsion due
to 4 chamber profile.
Distinctive orange powder
coating. 2mm thick
aluminium profile. box
section 60 x 26mm.
Availability: In Stock
£43.75
Archived Product
-
100cm/36" level suitable
for both trade and the
serious diy'er. 30 years
vial guarantee. Smooth
aluminium profile. silver
anodized finish. The
vials are electronically
adjusted and fixed and
ultrasonically welded
into level. break and
shock proof tube vials.
Magnified vials. 2 vials
- 1 horizontal, 1
vertical. Horizontal vial
has additional markings:-
horizontal line and 2%
slope at a glance.
Measuring accuracy in
normal position 0.5mm/m.
Availability: In Stock
£21.95
Archived Product
-
Professional quality
level with electronic
inclinometer, ideal for
carpenters, joiners,
kitchen builders,
metalworkers,
formworkers,
construction engineers,
pipe fitters and many
more. Inclinometer:
- dual display for
accurate easy reading of
inclinations in all
positions. a second
display located in the
upper surface for easier
reading of the measured
value
- angle indication in
degrees, percentage,
mm/m, in/ft.
- accoustic signal for
horizontal and vertical
measuring.
- automatic switch off
can be selected after
10min or 2 hours.
spirit level:
- extra long ribbed
profile providing a high
resistance to deformation
during everyday use on
site.
- permanently moulded
precision vials for
overhead reading - no
readjustment required.
- removeable endcaps for
measuring flush into
corners.
- special coating to
protect level against
dirt.
- ruberised handholes for
easier handling.
technical specification:
measuring accuracy of
electronic module @ 0âº
and 90⺠0.05âº
@ 1⺠and 89âº
0.2âº
measuring accuracy of
spirit level
in normal position:
0.029⺠= 0.5mm/m
in upside down position
0.029⺠= 0.5mm/m
power supply: 2 x aaa
batteries
length: 100cm
carry bag
included.
Availability: In Stock
£218.29
Archived Product
-
As with type 81s or 81sm
but with additional angle
vial either pre-set or
adjustable to report an
angle. the model with
v-grooved base also
includes the special 6
ring vial for marking 1%
and 2% slopes for soil or
waste pipe installation.
Measurement accuracy:
0.029â° = 0.5mm/m
for overhead
measurements: 0.043â° =
0.75mm/m
type 81sremw45 –
45â° vial, v grooved
base & rare earth magnets
type 81svw360 - 360â°
vial, v grooved base &
rare earth magnets
the 81svw45 has a fixed
45â° vial - ideal for
direct checking of struts
and pipes at 45â° and
has rare earth magnets
for extra secure adhesion
to pipes and other steel
items.
six ring vial for 1 % and
2 % slopes
length:
10in.
Availability: In Stock
£49.95
Archived Product
-
This distinctive spirit
levels extremely strong
double-chamber profile
has 2 finger holes with
the red coated end being
telescopic. The extremely
sturdy construction, in
conjunction with the
strong eccentric clamp,
ensures a high level of
accuracy when extended to
any position.
the printed length scale
is ideal for setting the
extended length.
small plates are provided
on one side to even out
any irregularities.
a reliable partner when
aligning higher and
longer constructions.
light metal rectangular
profile with 1 horizontal
vial and 2 vertical
vials.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m.
when extended in normal
position: 0.057â° = 1.0
mm/m. for overhead
measurements (in closed
position): 0.043â° =
0.75 mm/m.
a level which extends
from 213 to 376cm,
useful for checking high
or long work where you
can measure and level at
the same time.
level has 2 hand grips
for easy control.
vials:
3.
Availability: In Stock
£195.99
Archived Product
-
Stabila 80am series
magnetic levels. Strong
and light profile for
everyday use.
one milled
Availability: In Stock
£81.35
Archived Product
-
The stabila 90-2
heavy-duty level is made
from strong but
lightweight metal alloys
and features soft ribbed
reinforcements that make
the level easier to
handle and improve
strength. It has two
vertical vials which
ensures accurate
measuring, the level
also has a single
horizontal vial. this
horizontal vial has a
viewing angle of up to
300â° and can also be
used for overhead
measurements by turning
the level upside down.
the level is also fitted
with impact resistant end
caps that provide good
shock-absorption in the
event that the level is
dropped.
Availability: In Stock
£32.99
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m.
box of 10 levels.
Availability: In Stock
£292.89
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
The horizontal vial can
be read from all four
sides and both the
vertical vials from three
sides, whether in normal
position or overhead.
with an additional angle
finding vial. the second
vertical vial can be
rotated so that you can
determine the angle of
the inclination that you
are measuring.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m. for
overhead measurements:
0.029â° = 0.5 mm/m.
angular measurement
tolerance: ã‚â±
0.3â°.
length. 1000mm
(40in).
Availability: In Stock
£111.05
Archived Product
-
The angle setter is a
versatile measuring
instrument that combines
the functions of both a
spirit level and
protractor. a large easy
to read lcd screen
display a digital angle
reading of up to 220.00
degrees with an accuracy
of â±0.1degree. the
protractor can be used to
fi nd angles, calculate
mitre angles and the
display can be locked for
the precise transfer of
the angles onto the
workpiece. The integral
horizontal and vertical
spirit levels with an
accuracy of â±0.5mm/m
help to ensure true
accuracy when setting
angles or used as a
conventional level.
Availability: In Stock
£59.79
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
3-vials - the horizontal
vial to be viewed from
4-sides and the vertical
vials from 3-sides.
accuracy: +/-0.5mm/m in
normal and overhead
positions.
length.1000mm (40in).
supplied in a
bag.
Availability: In Stock
£99.60
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
3-vials - the horizontal
vial to be viewed from
4-sides and the vertical
vials from 3-sides.
accuracy: +/-0.5mm/m in
normal and overhead
positions.
length.400mm
(16in).
Availability: In Stock
£62.20
Archived Product
-
This spirit level can be
used to check the
horizontality of overhead
surfaces by turning it
and its horizontal vial
upside down. in this
so-called transfer
position, you can then
measure precisely from
underneath. Light metal
rectangular profile with
milled measuring surface
for everyday use.
1 vertical vial and 1
horizontal vial.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m. for
overhead measurements:
0.043â° = 0.75 mm/m.
stabila patent. vials
that are moulded in - no
readjustment required.
length 100cm /
40in.
Availability: In Stock
£32.59
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£80.65
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m
pressure die-cast frame 1
milled measuring face. 1
vertical, 1 horizontal
vial for normal and
upside down measuring.
protecting noses to
prevent damage to milled
face.
a very popular level with
scaffolder, with
holster.
magentic base.
length. 10in.
accuracy. 0.5mm/m normal
position.
0.75mm/m upside down
position.
Availability: In Stock
£33.09
Archived Product
-
Extruded aluminium girder
section level with
overall epoxy polyester
coated finish to resist
abrasion and enable
easycleaning. The third
vial is an angle setter
which can be rotated and
locked to any angle up to
360âº.
accuracy isto +/- 1mm per
metre.
overall
length.1000mm/40in.
Availability: In Stock
£15.05
Archived Product
-
Professional quality
level with electronic
inclinometer, ideal for
carpenters, joiners,
kitchen builders,
metalworkers,
formworkers,
construction engineers,
pipe fitters and many
more. Inclinometer:
- dual display for
accurate easy reading of
inclinations in all
positions. a second
display located in the
upper surface for easier
reading of the measured
value
- angle indication in
degrees, percentage,
mm/m, in/ft.
- accoustic signal for
horizontal and vertical
measuring.
- automatic switch off
can be selected after
10min or 2 hours.
spirit level:
- extra long ribbed
profile providing a high
resistance to deformation
during everyday use on
site.
- permanently moulded
precision vials for
overhead reading - no
readjustment required.
- removeable endcaps for
measuring flush into
corners.
- special coating to
protect level against
dirt.
- ruberised handholes for
easier handling.
technical specification:
measuring accuracy of
electronic module @ 0âº
and 90⺠0.05âº
@ 1⺠and 89âº
0.2âº
measuring accuracy of
spirit level
in normal position:
0.029⺠= 0.5mm/m
in upside down position
0.029⺠= 0.5mm/m
carry bag
included.
Availability: In Stock
£255.75
Archived Product
-
Easy to handle,
lightweight shock
resistant level with top
read vial for easy
readability. Will not
dent like aluminium
levels.
ideal for use on finished
surfaces (non-marking)
measuring scale for multi
tasks.
made from high impact abs
plastic.
3 vials (0-90⺠-
45âº)
length. 12in.
(30cm).
Availability: In Stock
£3.95
Archived Product
-
Professional quality
level with electronic
inclinometer, ideal for
carpenters, joiners,
kitchen builders,
metalworkers,
formworkers,
construction engineers,
pipe fitters and many
more. Inclinometer:
- dual display for
accurate easy reading of
inclinations in all
positions. a second
display located in the
upper surface for easier
reading of the measured
value
- angle indication in
degrees, percentage,
mm/m, in/ft.
- accoustic signal for
horizontal and vertical
measuring.
- automatic switch off
can be selected after
10min or 2 hours.
spirit level:
- extra long ribbed
profile providing a high
resistance to deformation
during everyday use on
site.
- permanently moulded
precision vials for
overhead reading - no
readjustment required.
- removeable endcaps for
measuring flush into
corners.
- special coating to
protect level against
dirt.
- ruberised handholes for
easier handling.
technical specification:
measuring accuracy of
electronic module @ 0âº
and 90⺠0.05âº
@ 1⺠and 89âº
0.2âº
measuring accuracy of
spirit level
in normal position:
0.029⺠= 0.5mm/m
in upside down position
0.029⺠= 0.5mm/m
power supply: 2 x aaa
batteries
length: 60cm
carry bag
included.
Availability: In Stock
£192.75
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£32.25
Archived Product
-
Manufactured from
heavy-duty ribbed
aluminium alloy box
section. Fitted with
three factory set acrylic
block vials, 2 vertical
and one horizontal,
guaranteed against
leakage and breakage for
5 years.
fitted with shock
absorbing end caps.
ground on top and bottom
working faces.
accuracy in normal
working position is â±
0.5mm/m and in the
reverse position â± 0.
7mm/m.
size. 1200mm / 48in.
supplied with carry
case.
Availability: In Stock
£23.69
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m.
box of 10 levels.
Availability: In Stock
£337.65
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m.
box of 10 levels.
Availability: In Stock
£344.79
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£37.19
Archived Product
-
Easy-to-handle,
lightweight shock
resistant level with top
read vial for easy
readability. Will not
dent like aluminium
levels.
ideal for use on finished
surfaces (non-marking)
measuring scale for multi
tasks.
made from high impact abs
plastic.
3 vials (0-90â° -
45â°)
i beam profile
lightweight and shock
resistant level with
injection moulded abs
body. 3 high visibility
tubular vials - 1 level,
1 plumb, 1 45deg - the
top face is marked with
metric graduations.
length: 48inch / 1200mm
vials:
3.
Availability: In Stock
£10.99
Archived Product
-
This levels distinctive
shape shows that it is a
special type. it is made
from pressure-cast light
metal and its slim,
bevelled shape makes it
suitable for working in
cramped spaces. Pressure
die-cast frame 1 milled
measuring face. 1
vertical, 1 horizontal
vial for normal and
upside down measuring.
protecting noses to
prevent damage to milled
face.
a very popular level with
scaffolders.
accuracy. 0.5mm/m normal
position.
0.75mm/m upside down
position.
length.10in. (250mm)
complete with
holster.
Availability: In Stock
£28.69
Archived Product
-
Stabila 80am series
magnetic levels. Strong
and light profile for
everyday use.
one milled
Availability: In Stock
£89.25
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
The horizontal vial can
be read from all four
sides and both the
vertical vials from three
sides, whether in normal
position or overhead.
with an additional angle
finding vial. the second
vertical vial can be
rotated so that you can
determine the angle of
the inclination that you
are measuring.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m. for
overhead measurements:
0.029â° = 0.5 mm/m.
angular measurement
tolerance: ã‚â±
0.3â°.
length. 400mm.
(16in).
Availability: In Stock
£68.29
Archived Product
-
This pressure-cast light
metal level has two
milled measuring
surfaces. it is robust
and very practical: its
two handholds make it
very comfortable to use.
The horizontal vial can
be read from all four
sides and both the
vertical vials from three
sides, whether in normal
position or overhead.
with an additional angle
finding vial. the second
vertical vial can be
rotated so that you can
determine the angle of
the inclination that you
are measuring.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m. for
overhead measurements:
0.029â° = 0.5 mm/m.
angular measurement
tolerance: ã‚â±
0.3â°.
length. 600mm
(24in).
Availability: In Stock
£79.00
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£28.75
Archived Product
-
Bmi 698 professional
90cm/36" robust level 3
vial. the flagship of the
bmi range- a professional
level available from
40cm/16" up to 240cm/96".
12 year vial guarantee.
The vials are
electronically adjusted
and fitted and
ultrasonically welded
into level. horizontal
spirit level indicator
with magnification effect
for the best readability
properties. 3 vials - 1
horizontal with
magnifying effect, 2
vertical. Measuring
accuracy in normal
position and for overhead
measurements 0.5mm/m.
Domed, replaceable,
shock absorbing rubber
end caps. extremely
resistant to torsion due
to 4 chamber profile.
Distinctive orange powder
coating. 2mm thick
aluminium profile. box
section 60 x 26mm.
Availability: In Stock
£58.95
Archived Product
-
The strong die-cast body
is shaped for easy
handling and is ideal for
scaffolders, pipe
fitters and steel
erectors. a milled base
with flush mounted
magnets permits hands
free measuring on steel
surfaces. the solid
acrylic vials are
accurate to â± 1 mm per
metre. 2 vials.
length: 240 mm
(9.1/2in).
Availability: In Stock
£6.75
Archived Product
-
Extremely sturdy cast
light alloy bodied level,
withstands knocks and
drops and is conveniently
sized to be easily
carried and handled.
additional magnets
mounted in the milled
measuring surface
securely hold this level
to scaffolding or beams.
1 horizontal and 1
vertical vial.
Measurement accuracy:
0.029â° = 0.5mm/m
solid die cast aluminium
frame for strength high
torque resistance
eliminates the problem of
twisting.
two super strong rare
earth magnets for
fantastic sticking power
to steels and scaffold
tubes.
level vial accuracy
guaranteed for 10 years.
horizontal and vertical
reading in both vial up
and vial down positions.
size 250mm /
10in.
Availability: In Stock
£35.89
Archived Product
-
Incorporating the boa
clear cool vision vials,
the tri level has been
developed with the
professional in mind.
With substantial
aluminium profile, wide
base and low centre of
gravity the tri level is
designed to be stable in
the most adverse weather
conditions.
the v shaped base means
that pipe work, roofing
and uneven surfaces
become easy to deal with.
features.
accurate to 0.5mm/m
metric and imperial
scales
safe cutting edge
marking edge.
size
120cm/48in.
Availability: In Stock
£66.59
Archived Product
-
Incorporating the boa
clear cool vision vials,
the tri level has been
developed with the
professional in mind.
With substantial
aluminium profile, wide
base and low centre of
gravity the tri level is
designed to be stable in
the most adverse weather
conditions.
the v shaped base means
that pipe work, roofing
and uneven surfaces
become easy to deal with.
features.
accurate to 0.5mm/m
metric and imperial
scales
safe cutting edge
marking edge.
size.
180cm/72in.
Availability: In Stock
£91.59
Archived Product
-
Incorporating the boa
clear cool vision vials,
the tri level has been
developed with the
professional in mind.
With substantial
aluminium profile, wide
base and low centre of
gravity the tri level is
designed to be stable in
the most adverse weather
conditions.
the v shaped base means
that pipe work, roofing
and uneven surfaces
become easy to deal with.
features.
accurate to 0.5mm/m
metric and imperial
scales
safe cutting edge
marking edge.
size.
60cm/24in.
Availability: In Stock
£41.60
Archived Product
-
Incorporating the boa
clear cool vision vials,
the tri level has been
developed with the
professional in mind.
With substantial
aluminium profile, wide
base and low centre of
gravity the tri level is
designed to be stable in
the most adverse weather
conditions.
the v shaped base means
that pipe work, roofing
and uneven surfaces
become easy to deal with.
features.
accurate to 0.5mm/m
metric and imperial
scales
safe cutting edge
marking edge.
size.
40cm/16in.
Availability: In Stock
£24.95
Archived Product
-
Incorporating the boa
clear cool vision vials,
the tri level has been
developed with the
professional in mind.
With substantial
aluminium profile, wide
base and low centre of
gravity the tri level is
designed to be stable in
the most adverse weather
conditions.
the v shaped base means
that pipe work, roofing
and uneven surfaces
become easy to deal with.
features.
accurate to 0.5mm/m
metric and imperial
scales
safe cutting edge
marking edge.
size.
90cm/36in.
Availability: In Stock
£49.95
Archived Product
-
Traditional spirit level
with smooth sidesand
electrostatic powder
coating. Light alloy
rectangular box design.
ideal level for
household, diy and
professional use.
accuracy: normal position
0.029⺠= 0.5 mm/m
3 vials 2 plumb, 1
horizontal
contents
1 x 70-2 180cm/72in level
1 x 70-2 60cm/24in level
1 x 70t 25cm/10in level
3 x carpenters pencils
1 x key ring
level.
Availability: In Stock
£60.09
Archived Product
-
A very sturdy level
torpedo style. with three
shockproof vials, one
horizontal, one
vertical, and on of which
is a angle setter, epoxy
locked top frame and a
lasting accuracy of
0.029â° = 0.5mm/m in
vial up position.
Length.250mm (10in).
2 vials.
Availability: In Stock
£7.85
Archived Product
-
This distinctive spirit
levels extremely strong
double-chamber profile
has 2 finger holes with
the red coated end being
telescopic. The extremely
sturdy construction, in
conjunction with the
strong eccentric clamp,
ensures a high level of
accuracy when extended to
any position.
the printed length scale
is ideal for setting the
extended length.
small plates are provided
on one side to even out
any irregularities.
a reliable partner when
aligning higher and
longer constructions.
light metal rectangular
profile with 1 horizontal
vial and 2 vertical
vials.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m.
when extended in normal
position: 0.057â° = 1.0
mm/m. for overhead
measurements (in closed
position): 0.043â° =
0.75 mm/m.
a level which extends
from 183 to 315cm. useful
for checking high or long
work. where you can
measure and level at the
same time.
level has 2 hand grips
for easy control.
vials:
3.
Availability: In Stock
£176.39
Archived Product
-
Traditional spirit level
with smooth sides, two
vertical vials and one
horizontal vial, but
with anodised,
electrostatic powder
coating. 2 vertical and 1
horizontal vials with
shock absorbing end caps.
accurate to +-. 0.5mm per
metre in the normal
position.
length. 1500mm
(60in).
Availability: In Stock
£54.19
Archived Product
-
Stabila 80am series
magnetic levels. Strong
and light profile for
everyday use.
one milled
Availability: In Stock
£56.55
Archived Product
-
This spirit level can be
used to check the
horizontality of overhead
surfaces by turning it
and its horizontal vial
upside down. in this
so-called transfer
position, you can then
measure precisely from
underneath. Light metal
rectangular profile with
milled measuring surface
for everyday use.
1 vertical vial and 1
horizontal vial.
measurement accuracy: in
the normal position
0.029â° = 0.5 mm/m. for
overhead measurements:
0.043â° = 0.75 mm/m.
stabila patent. vials
that are moulded in - no
readjustment required.
length 40cm /
16in.
Availability: In Stock
£21.99
Archived Product
-
Traditional spirit level
with smooth sides, two
vertical vials and one
horizontal vial, but
with anodised,
electrostatic powder
coating. 2 vertical and 1
horizontal vials with
shock absorbing end caps.
accurate to +-. 0.5mm per
metre in the normal
position.
length.1950mm
(78in).
Availability: In Stock
£63.85
Archived Product
-
High strength aluminium
body i beam cross section
level with protective end
caps and dual machined
surface. Easy-to-view
vials accurate on both
sides.
non-magnetic.
accuracy 0.5mm/m
easy-to-view 3 vials
accurate on both sides.
magnetic.
length:
1200mm.
Availability: In Stock
£21.85
Archived Product
-
Superior quality masons
level with plastic shield
to protect the level
against hits with a
trowel. The second
vertical vial is
positioned closer to the
center of the level for
better readability in
lower positions.
easy to clean due to
chamfered edges and new
vial plastic parts.
extra-strong profile with
ribs and reinforced upper
and lower side for daily
use on the construction
site.
high-precision vials are
firmly moulded in place
to ensure complete
accuracy.
other features include:-
removeable endcaps for
difficult-to-reach
corners, anti-slip
stoppers for convenient
marking of walls.
length:
80cm.
Availability: In Stock
£50.15
Archived Product
-
Light metal rectangular
profile with removable
end caps, 2 vertical and
1 horizontal vial. With
rare earth magnet system.
measurement accuracy:
in normal position:
0.029â° = 0.5 mm/m
overhead measurement
0.043deg = 0.75mm/m
extra strong, light
metal rectangular profile
with ridges for gripping
and novel removable end
caps
made from two materials.
these end caps provide
increased damping and,
when removed, a cleaner
marking line right into
the corner.
length: 200cm /
80in.
Availability: In Stock
£148.85
Archived Product
-
The stabila 90-2
heavy-duty level is made
from strong but
lightweight metal alloys
and features soft ribbed
reinforcements that make
the level easier to
handle and improve
strength. It has two
vertical vials which
ensures accurate
measuring, the level
also has a single
horizontal vial. this
horizontal vial has a
viewing angle of up to
300â° and can also be
used for overhead
measurements by turning
the level upside down.
the level is also fitted
with impact resistant end
caps that provide good
shock-absorption in the
event that the level is
dropped.
Availability: In Stock
£49.49
Archived Product
-
Light metal rectangular
profile with removable
end caps, 2 vertical and
1 horizontal vial. With
rare earth magnet system.
measurement accuracy:
in normal position:
0.029â° = 0.5 mm/m
overhead measurement
0.043deg = 0.75mm/m
extra strong, light
metal rectangular profile
with ridges for gripping
and novel removable end
caps
made from two materials.
these end caps provide
increased damping and,
when removed, a cleaner
marking line right into
the corner.
length: 180cm /
72in.
Availability: In Stock
£145.80
Archived Product
-
Professional quality
level with electronic
inclinometer, ideal for
carpenters, joiners,
kitchen builders,
metalworkers,
formworkers,
construction engineers,
pipe fitters and many
more. Inclinometer:
- dual display for
accurate easy reading of
inclinations in all
positions. a second
display located in the
upper surface for easier
reading of the measured
value
- angle indication in
degrees, percentage,
mm/m, in/ft.
- accoustic signal for
horizontal and vertical
measuring.
- automatic switch off
can be selected after
10min or 2 hours.
spirit level:
- extra long ribbed
profile providing a high
resistance to deformation
during everyday use on
site.
- permanently moulded
precision vials for
overhead reading - no
readjustment required.
- removeable endcaps for
measuring flush into
corners.
- special coating to
protect level against
dirt.
- ruberised handholes for
easier handling.
technical specification:
measuring accuracy of
electronic module @ 0âº
and 90⺠0.05âº
@ 1⺠and 89âº
0.2âº
measuring accuracy of
spirit level
in normal position:
0.029⺠= 0.5mm/m
in upside down position
0.029⺠= 0.5mm/m
power supply: 2 x aaa
batteries
length: 120cm
carry bag
included.
Availability: In Stock
£227.45
Archived Product
-
Stabila 80a -2 series
level. Strong and light
profile for everyday use.
one milled measuring
Availability: In Stock
£40.39
Denmark