More From Contributor

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

...

Archived Product

DC-LINK CONDENSER MKP4 10% 25

DC-LINK CONDENSER MKP4 10% 25

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They

Availability: Out Of Stock
Supplier: Conrad
SKU: 444008

Description Reviews / Comments Add New

Product Description

These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film & show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, they are also characterised by:
- Very high volume capacity
- High rated voltage per component
- Very low loss factor (ESR)
- Very high insulation resistance
- Excellent self-healing properties
- High life expectancy
- Unpoled design
- Special contact-proof connection configurations

Reviews/Comments

Add New

Home
Contributors
International Sites
- United Kingdom
- France
- Germany
- Netherlands
- Denmark
- Sweden
- Italy
- Spain
Account
Information