Website: http://conrad.com/ Conrad have been at the cutting edge of technology around the world for over 85 years. From Berlin in 1923 Conrad has expanded through the years and is now a global player in technology and consumer electronics.
All transformers are manufactured with UL94-VO approved material, lacquer dipped and intended for PCB mounting The working frequencies between 40 kHz and 132 kHz. They have the class B insulation and protection class IP00. Through the winding structure, an optimal magnetic coupling is achieved. The transformers are designed for an ambient temperature of 40 ° C. At higher temperatures, the transmitted power will reduce accordingly
Very compact film and slide scanner for high resolution digitisation of negatives and slides. This 7200 x 3600 dpi scanner enables high-quality prints. The high scanning speed and ICE³™ dust and scratch correction ensure that you can work effectively. The scanner boasts LED lighting and good results can be achieved even with poor quality negatives and experimental exposure thanks to a maximum density Dmax of 3.2.
The Application Board I is the hardware basis for the applications of the Main Unit I. In order to be able to cover the greatest number of applications, we have provided the Application Board I with many useful hardware components and connection facilities. As well as the micro beeper for tone output, a membrane keyboard with 12 keys (occupies an analog port) and a 2 x 16 dot matrix LCD display are included. In addition to the 8 analog and 8 digital interfaces, the Application Board I also offers a serial interface. This makes the Application Board ideal for data logging with remote transmission. Here you can either transfer the data direct to your PC or on to another Application Board.
An extension of the main memory is the simplest and most effective way to enhance the efficiency of your computer. With this high-quality RAM module from Corsair, you can simply upgrade your notebook. Supplement your existing memory or completely replace your old 256 or 512 MB modules. Most notebooks can get two of these Corsair modules and you can be benefited from many advantages from up to 4096 MB of RAM.
The configurable Gateway CANopen to Profibus DP enables communication between two independent, different bus technologies. It's easily configurable with the included PC software via RS232 interface. The internal data processing is done via 16-bit microprocessor. The setting of different transmission rates is possible basically, where lies a maximum transmission rate at 12 Mbps on the Profibus side. Installation is simple and reliable on DIN rail.
The robot PRO-BOT128 available as a kit forms the ideal basis for entering the world of electronics, mechanics and programming. As such, best suitable for school and trainings. The brain of the robot is "C-Control PRO MEGA128", which provides adequate memory and speed even for complex tasks. Naturally the PRO-BOT128 can be extended with various sensors and actors, such as via the I2C-bus. The accompanying software package with various tests and sample programs enable a quick start with the PRO-BOT128.
The Main Unit I is the ideal solution to many individual switching and control tasks. The unit is based on a MC 68HC05B6 microcontroller with 8 A/D converter inputs. The 16 digital connections are programmable and can be used as inputs or outputs. For analog signals you are provided with 8 inputs and 2 pulse width modulated outputs. The 8 kB EEPROM memory holds the user program which you have written and can also record results or measurements. 256 bytes are also available for you to use for assembly code. The 9 pin serial interface connects the Main Unit I with your PC. As programming software you may choose between the Plus version which provides a graphical solution or the Basic version which provides line text. The saved data remains available even after a power failure because of the use of EEPROM storage. If you want to use your Main Unit I to switch, adjust or control accurately to the second, simply connect an external DCF-77 antenna. Two buttons are provided on the circuit board and these enable you to start the program or reset the system. And for energy saving stand-alone operation, you may use jumpers to separate the interface components and the LEDs from the operating voltage.
Extending the main memory is the simplest and most effective way to enhance the efficiency of your notebook. You can simply upgrade your notebook with this high-quality RAM module from Kingston. Supplement your existing memory or completely replace the old 512 MB, 1024 MB or 2048 MB modules. Check your notebook's operating instructions for the number of RAM slots; most notebooks are equipped with two slots, so you can benefit from the many advantages of 8192 MB RAM. No software installation is required; simply clip in your new memory and it is detected automatically when you boot your system up.
All transformers are manufactured with UL94-VO approved material, lacquer dipped and intended for PCB mounting The working frequencies between 40 kHz and 132 kHz. They have the class B insulation and protection class IP00. Through the winding structure, an optimal magnetic coupling is achieved. The transformers are designed for an ambient temperature of 40 ° C. At higher temperatures, the transmitted power will reduce accordingly
The C-control I unit M Advanced is 100% compatible to the C-control I unit M 2.0. It is however additionally equipped with 32 bits floating point Arithmetic module in the operating system In addition it possesses a larger BASIC program memory of 22 KB as well as a larger variable memory of 240 bytes. This makes possible the application in a simple way, with comfortable and professional computations with floating-point arithmetic application of the new programming environment Workbench++ contained in the scope of supply That program download on the unit M Advanced can be optionally quickened in relation to the unit M 2.0
The C-Control Project Board is a convenient alternative to the evaluation board The C-Control Project Board PRO includes the major components needed to operate the C-PRO Control Unit. on the Project Board a voltage supply (USB / AC adapter), interface converter (RS232) and a large hole grid for their own developments. By default, the Project Board is designed for programming via RS232. Optionally, the RS232-USB Converter No. 19 72 57, the programming of the unit via USB can be done.