United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Accessories/DSLR Accessories/Triggers, Adapters & Releases
Available
-
MC-DC1 is a 4 pin Remote
Control. It makes it
possible to release the
shutter from a distance.
This Remote Control can
be very useful to prevent
camera shake during
shutter release.
Availability: In Stock
£34.00
Available
-
Ten-pin to two-pin
adapter cord for
connecting devices with
two-pin terminals,
including the MW-2 radio
control set, MT-2
intervalometer, and ML-2
modulite control set.
Availability: In Stock
£85.99
Available
-
Features a 3.5mm mono
jack on one end and a
right-angle PC sync
connection on the other.
Can be used with the
Calumet Pro Series 2.4GHz
Wireless Triggers. Cable
Length: 11.8" (.3 meters)
Availability: In Stock
£5.00
Available
-
The Calumet O6 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the
Olympus E520, E510,
E420, E410, E400,
SP-570 UZ, SP-560 UZ,
SP-550 UZ, SP-510 UZ.
Cable Length: 3 feet (0.9
meters)
Availability: In Stock
£10.00
Available
-
Nikon MC-DC2 Remote
Control is a wired remote
control unit for the
Nikon D90, D5000 and
D5100 DSLRs. It connects
to the camera with a
small plug, allowing you
to fire the shutter
without physically
touching the camera,
thereby reducing the risk
of camera-shake on long
exposures.
Availability: In Stock
£30.00
Available
-
Trigger cable for Calumet
4-channel Remote Trigger
CALCF0085 and Sony
cameras. With this cable
the CF0085 4-channel
remote timer can be used
as a cable release or as
a wireless remote trigger
(2 X CF0085). Always turn
off camera/CF0085 before
running the cable.
Availability: In Stock
£20.00
Available
-
The Timer Remote
Controller TC-80N3 is a
remote switch with the
following timer control
and exposure count
control functions. It is
very useful for
time-lapse photography of
blooming flowers,
astrophotography, etc.
Features: Self-timer
Interval timer Long
exposure timer Exposure
count control Remote
switch function
Availability: In Stock
£129.00
Available
-
The Nikon MC-30A remote
cord is remote shutter
release cable featuring a
trigger lock mechanism
for unlimited time
exposures. The MC-30A has
a 10-pin plug and works
with any Nikon with a
10-pin remote port
including the following
Nikon DSLRs: D3, D3s,
D3x, D4, D200, D300,
D300s, D700, D800, and
D800E.
Availability: In Stock
£100.00
Available
-
The C6 Shutter Release
Cable allows you to use
the Calumet Pro Series
2.4GHz Wireless triggers
and Calumet Digital
Shutter Timer Controller
with select Canon
cameras. Compatible
cameras include the Canon
EOS 30, 33, 50, 300D /
350D / 400D / 450D /
1000D / 500D / 550D, and
Contax N, 645, and
Pentax K110D, K100D,
K200D, K10D, K20D, ist
DS, DS2, DL2, DL, D.
Cable Length: 1.2
ft (3.8 m) coiled -
stretches to 2.3 ft (.69
m)
Availability: In Stock
£5.00
Available
-
This unique,
multi-functional,
infrared remote
universally controls the
shutter-release functions
and other features of
many camera brands and
models. Includes lanyard,
battery and instruction
manual. IR 6 Camera
Compatibility: Canon I -
Powershot Pro 1,
G6/G5/G3/G2/G1/D1/IS/,
(S70/S60/Pro 90IS Shutter
relase function only).
Canon II -
300D/350D/400D/450D/500D/550D/600D/60D/7D/5DMKII/Z180u/Z155/120
ELPH/370Z/Z3. Nikon -
D90/D80/D70/D70s/D60/D5000/D5100/D3000D/D7000/D50/D40/D40x/Nuvis
S/Parone S/Lite Touch
Coolpix 8800-8400/Lite
Touch
150ED/140ED/130ED110s/100W.
Olympus -
E10/E100RS/E2500/E330/E300/E-1/E20/E-400/E-500/E-510/E410/E-5/E-30/E-450/E-520/E-420/E-3/E2100.
Pentax -
K7/K-r/K-x/K-5/645D/K-M/K20D/K200/K100D/K110D/K10D/K100D
SUPER. Sony -
SLT-A55/a900/a580/a450/a290/a550/a390/a700/a500/a560/a33/a55/a230/a330/NEX-5C.
Availability: In Stock
£10.00
Available
-
The Hildozine
PocketWizard Transceiver
Caddy for the Plus III is
designed to attach to a
transceiver and have the
ability to mount on a
light stand, tripod,
etc. No more dangling on
the end of a cord or
using Velcro. Simply
screw in the back of the
transceiver and use the
bungee cord to secure it.
This Caddy is an
inexpensive way to make
your transceiver very
secure and is a perfect
match for all
PocketWizard Products.
Availability: In Stock
£13.99
Available
-
The Calumet C6 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Canon
EOS 30, 33, 50, 300D,
400D, 450D, 500D,
550D, and Contax N,
645, and Pentax K110D,
K100D, K200D, K10D,
K20D, ist DS, DS2,
DL2, DL, D. Cable
Length: 3 feet (0.9
meters)
Availability: In Stock
£10.00
Available
-
The CR-21 Cable Release
is an alternative to the
RS-31 Remote Controller
offering a wired
connection to the camera.
This reduces the risk of
camera shake, which can
result in blurred images.
Especially useful when
using Mirror up and
super-telephoto lenses.
Availability: In Stock
£25.00
Available
-
Hahnel Captur Timer Kit
for Fujifilm Wireless
Remote Shutter Release &
Timer Remote. Features:
Ideal for time-lapse
photography Time Lapse &
Bulb Exposures Single /
Continuous / Bulb Modes
Two Timing Sequences
Connect to camera with
connector cables supplied
DCM - Digital Channel
Matching AA Battery
Powered 100m Range
Additional receivers
available to fire
multiple DSLR’s Can be
integrated with other
Captur Modules Larger
easy to read LCD
Availability: In Stock
£79.00
Available
-
Fabric release with
locking screw. Threaded
rotating tip.
Availability: In Stock
£26.00
Available
-
The Shutter Release
Cables with 2.5mm adapter
are designed to be used
with the Calumet Digital
Shutter Timer Controller
and the Calumet 4-Channel
Wireless Trigger Kits.
Compatible cameras
include the Nikon D90,
D5000, D7000. Cable
Length: 1.2 ft (3.8 m)
coiled - stretches to 2.3
ft (.69 m)
Availability: In Stock
£5.00
Available
-
Triggertrap Mobile Dongle
& DC0 Cable Kit For Nikon
MD3-DC0 Are you ready to
take your FujiFilm,
Kodak, or Nikon camera
remote release into the
current millennium? Well,
by golly, have you come
to the right place.
You'll need our
award-winning Triggertrap
Mobile App and a
connection kit. Download
the app to your iPhone,
iPad or Android device,
and use the Triggertrap
Mobile kit to connect
your smartphone to your
camera. Voila and
congratulations, you've
added a ton of smart
features to your camera,
including: Remote Release
mode (press to take a
photo) 3 different long
exposure remote modes
(timed remote,
press-and-hold, press to
start and press to stop)
5 different timelapse
modes, including Star
Trail, GPS-based
DistanceLapse, and
TimeWarp™ 13-exposure
HDR mode Sound trigger
Vibration trigger (iOS
only) Facial recognition
trigger (iOS only) Motion
trigger (iOS only) Sunset
calculator And much,
much more. You can
download app here:
http://www.triggertrap.com/products/apps/products/apps/triggertrap-mobile/1
Availability: In Stock
£29.99
Available
-
Canon BR-E1 Remote
Control Simple and
reliable wireless camera
control. Control your
Bluetooth®-compatible
EOS from up to 5m away
with a handy remote
control that’s reliable
and simple to use. Great
for shooting without
touching the camera, for
maximum sharpness, and
for selfies and group
shots. Simple remote
camera control Trigger
your Bluetooth® EOS
without wires or physical
contact Great for
including yourself in the
frame Shoot photos of
wildlife that would
otherwise be scared by
your presence Preserve
sharpness – shoot
without touching the
camera to avoid camera
shake Ideal for
night-time, macro and
interiors photography
Easy to set up and use
Pair with your
Bluetooth® EOS camera
and get shooting
straightaway Find buttons
easily by touch, without
talking your eyes off
your subject Lightweight
design you can take with
you easily and find at a
moment’s notice
Reliable performance
Operate your camera from
up to 5m away and from
any direction Controls
for shooting, AF-start
and power zoom 1 year
typical battery life
Wireless movie shooting
Start and stop video
capture with the press of
a button – a great tool
for vloggers Zoom in and
out when using the Power
Zoom Adapter PZ-E1 and
EF-S 18-135mm f/3.5-5.6
IS Capture video from
awkward viewpoints and in
impractical spaces
Availability: In Stock
£39.00
Available
-
Trigger cable for Calumet
4-channel Remote Trigger
CF0085 and Canon/Pentax
cameras. With this cable
the CF0085 4-channel
remote timer can be used
as a cable release or as
a wireless remote trigger
(2 X CF0085). Always turn
the camera off before
running the cable.
Availability: In Stock
£20.00
Available
-
The Calumet N10 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Nikon
D90 / D3100 / D5000 /
D7000 Cable Length: 3
feet (0.9 meters)
Availability: In Stock
£10.00
Available
-
This Infrared Remote
Control lets you control
the shutter release of
specific COOLPIX models
from a distance. It is
ideal for creating
self-portraits and can
help prevent camera shake
during shutter release.
Availability: In Stock
£30.00
Available
-
Pocket Wizard Caddy for
Plus II and Max is
designed to attach to the
Transceiver and have the
ability to mount on a
light stand, tripod,
etc... No more dangling
on the end of a cord or
using Velcro. Simply
screw in the back of the
Transceiver and use the
bungee cord to secure it.
Availability: In Stock
£13.49
Available
-
Remotely control the
shutter release of your
Sony a DSLR camera with
the RM-L1AM Remote
Commander.
Availability: In Stock
£65.99
Available
-
This remote switch come
with a 2.6' (80cm) cord
to prevent camera shake
for super telephoto
shots, macrophotography
and bulb exposures. The
remote switch works just
like a shutter button,
enabling halfway or
complete pressing. It
also has a
shutter-release lock. Its
quick-lock plug connects
to the EOS-3's remote
control socket.
Compatibility: EOS-1D
Mark IV Body EOS 5D Mark
III EF 24-105mm f/4L IS
USM Lens Kit EOS-1Ds Mark
II EOS 1D Mark II N EOS
6D Body Refurbished
EOS-1D EOS D60 EOS 40D
with EF 28-135IS
Refurbished EOS 7D EF
28-135mm IS Lens Kit EOS
40D Refurbished (Body)
EOS 7D Body EOS 5D Mark
III Body Refurbished
EOS-1D Mark IV Body
Refurbished EOS-1Ds EOS
20Da EOS 50D Body
Refurbished EOS 30D EOS
6D Body EOS 5D EOS 6D EF
24-105mm f/4L IS USM Lens
Kit EOS 20D EOS-1D Mark
III EOS 7D Body
Refurbished EOS 10D EOS
7D EF-S 18-135mm IS Lens
Kit EOS 5D Mark III Body
EOS D30 EOS-1Ds Mark III
EOS 5D Mark III EF
24-70mm f/4L IS USM Lens
Kit EOS 40D EOS 50D
(Body) EOS-1D X Body
Refurbished EOS-1D X Body
EOS-1D MARK II EOS 3 EOS
30D with EF-S 18-55 Lens
Refurbished EOS 30D
Refurbished (Body) EOS
50D EF 28-135mm IS Lens
Kit
Availability: In Stock
£37.00
Available
-
The Calumet N8 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Nikon
N90s, F5, F6, F100,
F90X, D1, D1H, D1X,
D2, D3, D2Hs, D2X,
D2Xs, D200, D300, D700
and Kodak DSC-14N and
Fuji S3 Pro, S5 Pro.
Cable Length: 3 feet (0.9
meters)
Availability: In Stock
£10.00
Available
-
The Calumet Universal
Cable Release when
combined with one of the
Calumet Camera Adapters
(sold separately)* will
allow you to avoid camera
shake that is common when
pressing the shutter
release with your finger.
The cable release focuses
and releases the shutter
in one stroke and also
features a convenient
sliding lock for timed
exposures. It's 39" cord
is coiled making it easy
to store. *This cable
release requires one of
the following adapter
plugs for use with your
DSLR: Camera Adapter for
Canon with N-3 Plug
(CF0061) Camera Adapter
for Canon with 2.5mm Plug
(CF0063) Camera Adapter
for Nikon with 10-pin
Plug (CF0066) Camera
Adapter for Nikon with
DC-1 Plug (CF0068) Camera
Adapter for Sony (CF0070)
Availability: In Stock
£15.00
Available
-
Trigger cable for Calumet
4-channel Remote Trigger
CF0085 and Nikon cameras.
With this cable the
CF0085 4-channel remote
timer can be used as a
cable release or as a
wireless remote trigger
(2 X CF0085). Before
running the cable always
turn off camera / CF0085.
Availability: In Stock
£20.00
Available
-
Cactus Shutter Cable
SC-N1 for Nikon SLR
Cameras Compatible with:
NIKON D810, D800E,
D800, D700, D300S,
D300, D200, D100 (via
MB-D100 battery grip),
D4s, D4, D3X, D3S,
D3, D2H, D2X, D2Xs,
D1X, D1H, D1, F100,
F90X, F90, F6, F5;
FUJIFILM FinePix S5 Pro,
S3 Pro; MZ-L, ZX-L;
Availability: In Stock
£13.00
Available
-
Sony Live Remote Control
with Wi-Fi Enjoy full
control of your Action
Cam from up to 16.40 ft
away with this Live-View
remote. Switch
effortlessly between
filming and live playback
with the wristwatch
design LCD screen.
Waterproofing also lets
you submerge the remote
up to 9.84 ft, so you
don’t have to worry
about the weather.
Availability: In Stock
£126.60
Available
-
The MC-36A Multi-Function
Remote Cord is a remote
shutter release cable
that can also function as
a timer remote and an
intervalometer for
time-lapse photography.
It can also activate a
camera's bulb function
for long exposures. The
MC-36A plugs directly
into the camera's 10-pin
remote port and is
compatible with the
following Nikon DSLRs:
D3, D3s, D3x, D4,
D200, D300, D300s,
D700, D800, D800E.
Availability: In Stock
£159.00
Available
-
Features a 3.5mm mono
jack on one end and a
3.5mm mono jack on the
other. Can be used with
the Calumet Pro Series
2.4GHz Wireless Triggers.
Cable Length: 2.6
ft (0.8 m)
Availability: In Stock
£5.00
Available
-
Hahnel HRC 280 Remote
Shutter Release for Canon
Compatible Camera Models
EOS 1200D / 1100D /1000D
/760D / 750D / 650D /
550D / 500D / 450D / 400D
/ 350D / 300D / 70D / 60D
/ 50D / 40D / 30D 20D /
20Ds / 10D / 7D Mark II /
7D/ 6D / 5D / 5D Mark II
/ 5D Mark III / 5DS /
5DSR 1D / 1DX / 1DC / 1Ds
Mark III / 1Ds Mark IV
SX50HS Powershot G10 /
G11 / G12 / G15 / G3x /
G1x / G1x Mk II
Availability: In Stock
£22.80
Available
-
The Hahnel Giga T Pro is
a combined wireless and
timer controlled remote
shutter release. It is
ideal for a wide variety
of photographic uses that
require timed or
contact-free shutter
release, including
wildlife, long exposure,
astral, studio and
time-lapse photography.
Designed for use with
Nikon DSLR's this version
includes interchangeable
connectors for use with
the different models.
Availability: In Stock
£81.70
Available
-
The Shutter Release
Cables with 2.5mm adapter
are designed to be used
with the Calumet Digital
Shutter Timer Controller
(CF0098) and the Calumet
4-Channel Wireless
Trigger Kits (CF0090,
CF0094). Compatible
cameras include the Nikon
N90s, F5, F6, F100,
F90X, D1, D1H, D1X,
D2, D3, D2Hs, D2X,
D2Xs, D200, D300, D700
and Kodak DSC-14N and
Fuji S3 Pro, S5 Pro.
Cable Length: 1.2
ft (3.8 m) coiled -
stretches to 2.3 ft (.69
m)
Availability: In Stock
£5.00
Available
-
Hahnel Captur Timer Kit
for Sony Wireless Remote
Shutter Release & Timer
Remote. Features: Ideal
for time-lapse
photography Time Lapse &
Bulb Exposures Single /
Continuous / Bulb Modes
Two Timing Sequences
Connect to camera with
connector cables supplied
DCM - Digital Channel
Matching AA Battery
Powered 100m Range
Additional receivers
available to fire
multiple DSLR’s Can be
integrated with other
Captur Modules Larger
easy to read LCD
Availability: In Stock
£79.00
Available
-
For photographers who do
not want to bump the
bee's knees, spook the
subject, or receive a
stinging rebuke (or
worse), Canon's infrared
Wireless Controller LC-5
can make compelling
close-ups a snap, even
from more than one
football field away.
Working in Macro mode can
demand a level of
precision and steadiness
that goes beyond the
tolerances of typical
picture taking. Mounting
the camera on a sturdy
tripod and controlling
the camera functions with
a remote switch are
long-standing methods of
minimizing camera shake
and vibration. Now,
thanks to Canon's new
Wireless Controller LC-5,
photographers can easily
create compelling
close-ups from a safe and
secure "line-of-sight"
distance of up to 330
feet. Far more than a
wireless shutter release,
this newly enhanced
infrared remote provides
photographers with the
flexibility to control
essential camera
functions without
intruding on the scene.
Compatible with Canon EOS
20D, 10D, EOS-1D,
EOS-1DS, EOS-1D Mark II,
EOS-1DS Mark II, EOS-3,
and EOS-1V Easily
capture rock-solid macro
shots and close-ups from
up to 330 feet away
One-shot release mode
pre-focuses camera and
waits for subjects to
cross into range Attaches
easily to camera's
accessory shoe Powered by
four AA-sized batteries
Availability: In Stock
£399.00
Available
-
Triggertrap Flash Adapter
This is the next level of
Triggertrap Mobile
photography: triggering
your flash directly from
your smartphone! The
Triggertrap Flash Adapter
is perfect for the sort
of really high-speed
photography that a
conventional camera cable
release isn't quick
enough to catch. Only
compatible with ISO
standard hotshoe flashes
(not compatible with the
Sony/Minolta style
hotshoe) Must be used
with the Triggertrap
Mobile Dongle. Never
attempt to connect a
flash directly to your
smartphone. This flash
accessory must only be
used with modern,
portable electronic
flashes. Use with studio
equipment or with
high-voltage flashguns
may damage your
smartphone. A note to
Android users: The
Triggertrap Mobile app
for Android is not yet
optimised for high speed
photography with the
Triggertrap Flash
Adapter. Although you
will be able to trigger
your flash, delays
inherent in the Android
operating system means
that our Android app
can’t be considered a
truly high-speed device,
therefore we recommend
this product for use with
the iOS version of the
app only.
Availability: In Stock
£24.00
Available
-
Cactus Shutter Cable
SC-C3 for Canon SLR
Cameras Compatible with:
CANON EOS 50D, 40D,
30D, 20D, 20Da, 10D,
7D Mark II, 7D, 6D, 5D
Mark III, 5D Mark II,
5D, 1DX, 1Ds, 1Ds Mark
III, 1Ds Mark II, 1D
Mark IV, 1D Mark III,
1D Mark II N, 1D Mark
II, 1D, D60, D30, 1V,
3;
Availability: In Stock
£13.00
Available
-
This cable release is
designed for use with
Nikon SLR/DSLRs that use
a 4-pin connector. Avoid
camera shake caused by
depressing the shutter
release with a finger.
The cable release focuses
and releases the shutter
in one press and allows
for time exposures with
the sliding lock.
Approximately 39" (1m) in
length.
Availability: In Stock
£15.00
Available
-
The Calumet C8 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Canon
EOS 1V, 3, 1D, 1Ds,
1Ds Mark II, 1D Mark II,
1Ds Mark III, 1D Mark
IV, 10D, 20D, 30D,
40D, 50D, 5D, 5D Mark
II, 7D. Cable Length: 3
feet (0.9 meters)
Availability: In Stock
£10.00
Available
-
The Calumet S6 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Sony
A100, A200, A300,
A350, A700, A900 and
Minolta Dynax 7D, 5D,
9, 7, 5, 4, 3,
807si, 800si, 700si,
600si, 505si. Cable
Length: 3 feet (0.9
meters)
Availability: In Stock
£10.00
Available
-
The N6 Shutter Release
Cable allows you to use
the Calumet Digital
Shutter Timer Controller
and Calumet Pro Series
2.4GHz Wireless triggers
with select Nikon
cameras. Compatible
cameras include the Nikon
D70s, D80. Cable Length:
1.2 ft (3.8 m) coiled -
stretches to 2.3 ft (.69
m)
Availability: In Stock
£5.00
Available
-
Quantum D23W-R Dedicated
TTL Adaptor for Canon
Digital SLR. QTTL fully
dedicated adapter capable
of wireless TTL function.
Will work with all
digital models of Qflash.
(Check your camera
instruction manual to
determine if your camera
is capable of wireless
TTL.)
Availability: In Stock
£136.00
Available
-
DSLR Camera Radio Shutter
Release for Canon Pro
Availability: In Stock
£52.00
Available
-
This extension cord adds
an additional 9' 10" (3m)
to the MC-20, MC-22,
MC-23, MC-25, MC-30,
or MC-36 remote cords.
Availability: In Stock
£90.00
Available
-
Hahnel Captur Timer Kit
for Nikon Wireless Remote
Shutter Release & Timer
Remote. Features: Ideal
for time-lapse
photography Time Lapse &
Bulb Exposures Single /
Continuous / Bulb Modes
Two Timing Sequences
Connect to camera with
connector cables supplied
DCM - Digital Channel
Matching AA Battery
Powered 100m Range
Additional receivers
available to fire
multiple DSLR’s Can be
integrated with other
Captur Modules Larger
easy to read LCD
Availability: In Stock
£79.00
Available
-
The S6 Shutter Release
Cable allows you to use
the Calumet Digital
Shutter Timer Controller
with select Sony and
Minolta cameras./505si
Compatible cameras
include the Sony A100,
A200, A300, A350,
A700, A900 and Minolta
Dynax 7D, 5D, 9, 7,
5, 4, 3, 807si,
800si, 700si, 600si,
505si. Cable Length: 1.2
ft (3.8 m) coiled -
stretches to 2.3 ft (.69
m)
Availability: In Stock
£5.00
Available
-
Veho VCC-A036-WR - Muvi K
Series Wi-Fi Wireless
Remote Control Control
your MUVI K-Series camera
wirelessly for distances
of up to 120m (390ft)
thanks to the new MUVI
Wi-Fi remote control from
Veho. The new Wi-Fi
wireless remote control
has a built-in
lithium-ion rechargeable
battery which can last up
to 5 hours of continuous
use when paired with your
MUVI K-Series, so you
can be sure that you
never miss a moment. The
rugged and robust design
of the Wi-Fi remote has
an IP66 rating, which
means that the remote is
protected from total dust
ingress and from high
pressure water jets from
any direction. Perfect
for any action sports
such as cycling,
skiing/snowboarding,
mountain climbing and
other outdoor activities.
The Wi-Fi remote has 7
controlling buttons
allowing you to control
most of the camera’s
settings and features,
such as video recording,
still photos, photo
burst and settings
ensuring you capture what
you want. The Wi-Fi
remote has a built-in LCD
screen, which when
paired with your MUVI
K-Series will mirror the
status screen directly on
the remote control, for
confirmation of the
cameras functions and
settings. Using the
wrist/body strap you can
attach your wireless
remote to yourself or
your equipment enabling
you to keep your hands
free for your activity.
Key Features: Take full
wireless control of the
MUVI K-Series camera from
up to 120m(360ft) with
functions such as video
record, photo capture
and other key setting
changes directly from the
wireless remote Rugged
IP66 rated design which
protects from total dust
ingress and from high
pressure water jets from
any direction Use the
wrist/body strap to
attach your wireless
remote to yourself or
your equipment enabling
you to keep your hands
free for your activity.
Large internal
rechargeable battery
which will allow you to
control your MUVI
K-Series camera for up to
5 hours Built-in LCD
screen displays the MUVI
K-Series camera status
for easy access and
control of the camera.
Availability: In Stock
£49.00
Available
-
This adapter allows the
Four-channel Universal
Radio DSLR Camera Trigger
Kit (CF0060) and the DSLR
camera cable release
(CF0076) to be used with
Canon SLRs that have an
2.5mm socket such as the
Rebel XT, XTi and XSi.
Availability: In Stock
£8.00
Available
-
Kood Cable Release 24"
Cable Release metal,
locking function, 24
inch.
Availability: In Stock
£29.99
Available
-
Kaiser Fototechnik stands
for photographic and
digital products for
enthusiasts and
professionals. Kaiser
Fototechnik stands for a
philosophy to create
lines and products that
are modular so they can
be easily adapted to the
user's requirements and
can grow with them.
Kaiser Fototechnik stands
for a trademark that is a
symbol of quality,
reliability and
performance. PRODUCT
FEATURES: For connecting
the standard cable
release to cameras with
awkwardly placed
connecting thread; L-
shape; Threaded rotating
tip.
Availability: In Stock
£18.18
Available
-
This adapter allows the
Four-channel Universal
Radio DSLR Camera Trigger
Kit (CF0060) and the DSLR
camera cable release
(CF0076) to be used with
Sony DSLRs.
Availability: In Stock
£8.00
Available
-
One of the world’s
first true electronic
HDSLR remote controls,
the Clamp-On Electronic
Remote Control for Canon
HDSLRs lets you react
quickly to changing
contexts and creative
inspiration. The
Electronic Remote
connects to your Canon
HDSLR via USB and
interfaces with the
camera and lens firmware
directly in order to
control focus operations,
live view, record
start/stop & shutter
release, and more. -
3-step, ultra-precise
focus speed - Fixed or
variable focus control
modes - Customizable
focus speed limit - Focus
Memory settings - Live
View control - Auto Focus
control - Live View
Digital Zoom control -
Video recording
start/stop - Photo
shutter release - Remote
control battery status -
Customizable focus
direction - Recording LED
- Video and Photo LED -
Clamp fits the spacer
supplied with SYMPLA
Along with the Deluxe
model, the Clamp-On
remote control unit
promises real innovation
in the field of HDSLR
filming by circumventing
the need for any physical
contact between
follow-focus equipment
and the camera lens,
instead wiring directly
into the camera body to
use the internal focus
control systems. The
advantages are obvious:
lenses can be swapped
easily without extra
hardware or adjustment,
nothing jolts the camera
unexpectedly during
follow-focus, one-man
camera operation is
easier, and control at a
distance is as simple as
extending the cable
between the camera and
the remote. The Clamp-On
Remote is perfectly
integrated into the
SYMPLA system, fitting
comfortably to the spacer
element of a SYMPLA
Adjustable Handle and
allowing fingertip
control of key camera
functions without moving
the hand from the grips,
in turn making support
more stable and secure.
Availability: In Stock
£349.00
Available
-
This adapter allows the
Four-channel Universal
Radio DSLR Camera Trigger
Kit (CF0060) and the DSLR
camera cable release
(CF0076) to be used with
Nikon SLRs that have an
DC-1 socket.
Availability: In Stock
£8.00
Available
-
The remote control F
allows wireless shutter
release control via
infrared signal. Infrared
remote control compatible
with all Pentax cameras
that have infrared remote
control capability,
Compatible with X-5 and
X90 bridge cameras,
Optio VS20, WG-4/ GPS,
WG-20, WG-10, WG-3/
GPS, WG-2/ GPS, WG-1/
GPS, W90 compact
cameras, all PENTAX SLR
cameras and PENTAX medium
format.
Availability: In Stock
£25.00
Available
-
The Calumet Four-Channel
Universal Radio DSLR
Camera Trigger Kit allows
you to trip your camera's
shutter remotely,
allowing you to keep your
eye contact with the
subject or enabling you
to set up cameras in
places you can't be. It
is ideal for sports,
nature and portrait
photographers. This kit
contains one transmitter
and one receiver. It is
capable of operating at a
range of up to 150' (46m)
in a non-obstructed area.
The receiver comes with a
standard 3.5mm jack, as
well as a Velcro mount
and a metal hook to mount
to your camera strap. It
requires two AA batteries
(not included). The
transmitter comes with an
attached key chain and is
powered by a 23A,
12-volt battery
(included). Operating
instructions are
provided. Adapter plugs
(sold spearately) are
available for use with
other camera models.
Manual: Click here to
read the manual for
CF0060
Availability: In Stock
£45.00
Available
-
Remote release cord for
the H1, measure. 5
meters.
Availability: In Stock
£54.00
Available
-
Hahnel Remote Shutter
Release 2m Extension
Cable for Nikon SLR
Camera
Availability: In Stock
£20.39
Available
-
The Remote Control E
allows wireless shutter
release control and zoom
control via infrared
signal. Compatible with
X-5 and X90 bridge
cameras, Optio VS20,
WG-4/ GPS, WG-20,
WG-10, WG-3/ GPS, WG-2/
GPS, WG-1/ GPS, W90
compact cameras.
Availability: In Stock
£25.00
Available
-
Pocket Wizard N10-ACC-1
1ft Pre-Trigger Remote
Cable From: 1/8" (3.5 mm)
stereo miniphone To:
Nikon 10-pin remote
shutter release terminal
This is a special remote
shutter release cable
called a Pre-Trigger
Cable. A Pre-Trigger
cable controls both the
half-press and full-press
function of your remote
camera’s shutter
release. When a camera is
“pre-triggered”, it
is like holding your
camera’s shutter
release button in the
half-pressed or
metering/focusing
position. This cable
contains a "no diode"
circuit necessary only
for the newer Nikon
cameras, but will work
with other cameras as
listed below. It will not
work with the Nikon D200
or D100 w/ MB-D100. Use
the N10-ACC-D200
(formerly the N90M-ACC)
cable for those cameras.
Availability: In Stock
£29.00
Available
-
Sony RMT-DSLR2 Wireless
Remote Commander Designed
for SLT and Compact
System Cameras (NEX)
Compatible with a range
of NEX and SLT cameras so
you can take control of
photo and movie
composition from a
distance. Stop and start
the movie action With
wireless controls to stop
and start movies you can
direct the action while
your camera stays in the
perfect shooting
position. Perfect for
self-portraits and
wildlife shots With a
wireless infrared
connection you can
release the shutter when
you’re in the shot or
hidden away from the
camera. Totally avoid
camera shake With the
remote commander, you
can remotely and
accurately release the
shutter without touching
your camera Capture
different types of image
Sself-portraits are
simple, and
long-exposure shots are
possible with the remote
two-second shutter
release. View images and
control settings remotely
You’ll find it a handy
way to watch slideshows,
movies and adjust
settings without touching
your camera.
Availability: In Stock
£23.00
Available
-
Triggertrap Mobile Dongle
& N3 Cable Kit For Canon
MD3-N3 Are you ready to
take your Nikon camera
remote release into the
current millennium? Well,
by golly, have you come
to the right place.
You'll need our
award-winning Triggertrap
Mobile App and a
connection kit. Download
the app to your iPhone,
iPad or Android device,
and use the Triggertrap
Mobile kit to connect
your smartphone to your
camera. Voila and
congratulations, you've
added a ton of smart
features to your camera,
including: Remote Release
mode (press to take a
photo) 3 different long
exposure remote modes
(timed remote,
press-and-hold, press to
start and press to stop)
5 different timelapse
modes, including Star
Trail, GPS-based
DistanceLapse, and
TimeWarp™ 13-exposure
HDR mode Sound trigger
Vibration trigger (iOS
only) Facial recognition
trigger (iOS only) Motion
trigger (iOS only) Sunset
calculator And much,
much more. You can
download app here:
http://www.triggertrap.com/products/apps/products/apps/triggertrap-mobile/1
Availability: In Stock
£29.99
Available
-
*Camera not included in
second image Kit includes
a Bowens Trigger Card
This ultra-compact
transmitter with its
discreet
‘camera-hugging’ low
profile ensures that
photographers can shoot
comfortably without their
camera becoming
unbalanced by unwieldy
attachments. The Pulsar
Tx features a unique new
‘click-lock’ system
for attaching the unit to
the camera hotshoe
securely without the need
for further tightening
via a thumbscrew. The
‘click-lock’ holds
the trigger firmly in
place whether the camera
is being used in
landscape or portrait
position – and there is
no loss of connection,
as with some heavier
triggers. The lightweight
Pulsar Tx weighs in at
just 34g and is powered
by a single CR2032 cell
battery, the trigger’s
power management system
ensures long battery life
by making sure that the
unit is always in
low-power mode until more
energy is required.
Functionality couldn’t
be easier! The Tx is
controlled by just two
simple push buttons
allowing full control
over the 24 radio zones
and the test flash
function – with no
external switches there
is nothing to break and
nowhere for dust to
collect and compromise
the unit’s
performance. The solid
antenna adds to this
durability. Channel and
studio selections are
indicated by a row of
LED’s. NOTE: The
Pulsar Tx unit is a
transmitter only. A
receiver (Rx) is required
on at least one light.
This can be a Bowens
Pulsar Receiver Card
(BW5170) if you have a
compatible Bowens Gemini
monolight, or a Bowens
Pulsar Transceiver
(BW5150) for any other
type of light with a
standard sync socket.
Availability: In Stock
£136.99
Available
-
*Camera not included in
second image This
ultra-compact transmitter
with its discreet
‘camera-hugging’ low
profile ensures that
photographers can shoot
comfortably without their
camera becoming
unbalanced by unwieldy
attachments. The Pulsar
Tx features a unique new
‘click-lock’ system
for attaching the unit to
the camera hotshoe
securely without the need
for further tightening
via a thumbscrew. The
‘click-lock’ holds
the trigger firmly in
place whether the camera
is being used in
landscape or portrait
position – and there is
no loss of connection,
as with some heavier
triggers. The lightweight
Pulsar Tx weighs in at
just 34g and is powered
by a single CR2032 cell
battery, the trigger’s
power management system
ensures long battery life
by making sure that the
unit is always in
low-power mode until more
energy is required.
Functionality couldn’t
be easier! The Tx is
controlled by just two
simple push buttons
allowing full control
over the 24 radio zones
and the test flash
function – with no
external switches there
is nothing to break and
nowhere for dust to
collect and compromise
the unit’s
performance. The solid
antenna adds to this
durability. Channel and
studio selections are
indicated by a row of
LED’s. NOTE: The
Pulsar Tx unit is a
transmitter only. A
receiver (Rx) is required
on at least one light.
This can be a Bowens
Pulsar Receiver Card
(BW5170) if you have a
compatible Bowens Gemini
monolight, or a Bowens
Pulsar Transceiver
(BW5150) for any other
type of light with a
standard sync socket.
Availability: In Stock
£76.00
Available
-
Trigger cable for Calumet
4-channel Remote Trigger
CF0085 and Nikon cameras.
With this cable the
CF0085 4-channel remote
timer can be used as a
cable release or as a
wireless remote trigger
(2 X CF0085). Before
running the cable always
turn the camera/CF0085
off first.
Availability: In Stock
£20.00
Available
-
Canon RC-6 is a wireless
remote control designed
for use with the Canon
EOS 100D, 600D, 700D,
60D, 70D, 6D, and 5D
Mark III. Operates the
shutter release from up
to 5m away with the
choice of immediate
release or a 2 second
delay. Type Infra-red
remote For use with Canon
EOS 450D, 500D, 550D,
7D and 5D Mark II Colour
Black/Silver Weight (g)
24 Size 9.1 x 6.4 x 1.4mm
Availability: In Stock
£14.99
Available
-
The C8 Shutter Release
Cable allows you to use
the Calumet Digital
Shutter Timer Controller
and Calumet Pro Series
2.4GHz Wireless triggers
with select Canon
cameras. Compatible
cameras include the Canon
EOS 1V, 3, 1D, 1Ds,
1Ds Mark II, 1D Mark
II, 1Ds Mark III, 1D
Mark IV, 10D, 20D,
30D, 40D, 50D, 5D, 5D
Mark II, 7D. Cable
Length: 1.2 ft (3.8 m)
coiled - stretches to 2.3
ft (.69 m)
Availability: In Stock
£10.00
Available
-
Remote shutter release
with blue, yellow and
black termanials for
connection to a remote
shutter-triggering
device, allowing control
via sound or electronic
singlas. Compatible with
the F5, F4s, N90/N90s,
and D200
Availability: In Stock
£79.00
Available
-
Kaiser Fototechnik stands
for photographic and
digital products for
enthusiasts and
professionals. Kaiser
Fototechnik stands for a
philosophy to create
lines and products that
are modular so they can
be easily adapted to the
user's requirements and
can grow with them.
Kaiser Fototechnik stands
for a trademark that is a
symbol of quality,
reliability and
performance. PRODUCT
FEATURES: With 5 m (16
1/2 ft.) long release
tube and winding reel; 15
cm (5.9 in.) long cable
release with threaded
rotating tip.
Availability: In Stock
£25.15
Available
-
The pocket-sized Gemini
Remote Control makes
working with Bowens
Gemini 'R' and 'Pro'
monolights a breeze.
Weighing in at just 34g
this diminutive device
allows precise control of
your lighting from up to
seven meters away. This
multi-function remote
with eight IR channels
allows you control
multiple units without
ever leaving your camera
position. The remote
handset allows you to
control power levels,
modelling lamp settings,
test flash, photocell,
channel setting and other
functions. Operates from
a single CR2032 battery
(supplied). Technical
Data: Length: 95mm
Width: 45mm
Height: 10mm
Weight: 34g IR
Range: 7m
Availability: In Stock
£49.00
Available
-
Triggertrap Mobile Dongle
& DC2 Cable Kit For Nikon
MD3-DC2 Are you ready to
take your Nikon camera
remote release into the
current millennium? Well,
by golly, have you come
to the right place.
You'll need our
award-winning Triggertrap
Mobile App and a
connection kit. Download
the app to your iPhone,
iPad or Android device,
and use the Triggertrap
Mobile kit to connect
your smartphone to your
camera. Voila and
congratulations, you've
added a ton of smart
features to your camera,
including: Remote Release
mode (press to take a
photo) 3 different long
exposure remote modes
(timed remote,
press-and-hold, press to
start and press to stop)
5 different timelapse
modes, including Star
Trail, GPS-based
DistanceLapse, and
TimeWarp™ 13-exposure
HDR mode Sound trigger
Vibration trigger (iOS
only) Facial recognition
trigger (iOS only) Motion
trigger (iOS only) Sunset
calculator And much,
much more. You can
download app here:
http://www.triggertrap.com/products/apps/products/apps/triggertrap-mobile/1
Availability: In Stock
£29.99
Available
-
Connects to the camera's
electronic shutter
release, and provides
vibration free operation.
RE401 comes with a
1-meter (3ft.) spiral
cord. Weight: 50g
(1.8oz.)
Availability: In Stock
£86.00
Available
-
Remote control allows the
photographer to take
self-portraits or get
into group shots. Used in
conjunction with the
Mirror Lock-Up function,
it can reduce the
possibility of
image-blurring camera
shake, making it
particularly useful for
macro or telephoto
shooting.
Availability: In Stock
£25.00
Available
-
For cameras with ten-pin
remote terminal the ML-3
offers remote control for
two separate channels via
an infrared LED beam,
enabling automatic camera
operation from a distance
of up to about 8m. Auto
triggering, delayed
shutter release, single
and continuous shooting
are possible.
Availability: In Stock
£229.00
Available
-
Connects to the camera's
electronic shutter
release, and provides
vibration free operation.
The RE402 comes with a
5-meter (17ft.) straight
cord. Weight: RE402=80g
(3oz.)
Availability: In Stock
£95.00
Available
-
Fuji RR-90 Remote Release
for XM-1 Digital Camera.
Availability: In Stock
£36.00
Available
-
A compact remote switch
with a 2 ft cable
replicating all the
functions of the camera's
shutter release button.
Compatible with: 350D
(Digital Rebel XT), 400D
(Digital Rebel XTi),
450D (Digital Rebel XSi),
500D, 1000D K100D,
K110D, K10D, *ist Ds2,
*ist D, *ist Ds, *ist,
*istDL, *ist DL2 Samsung
GX-1L, GX-1S, GX-10
Canon EOS 30, 33, 50E,
300, 300V, 3000, 50,
300D (Digital Rebel)
Availability: In Stock
£15.00
Available
-
Fabric release with
auto-lock disc. Black
Fabric covering. Threaded
rotating tip
Availability: In Stock
£20.40
Available
-
PocketWizard Transceiver
Caddy for FlexTT5. No
more dangling on the end
of a cord or using
Velcro. Simply screw in
the back of the
Transceiver and use the
bungee cord to secure it.
Availability: In Stock
£13.49
Available
-
Manage your entire
Creative Lighting System
of multiple flash through
the large and easy to use
LCD panel. Removes the
need for cables and
separate flash meters to
enable accurate automatic
exposures in any lighting
conditions. The SU-800
can control of any number
of i-TTL Creative
Lighting system
Speedlights like the
SB-800 or SB-600, or the
dedicated SB-R200 Remote
Speedlight for Close-up
photography, to deliver
an entirely new dimension
to your photography
indoors or in the field.
Availability: In Stock
£320.00
Available
-
The Calumet N6 Wired
Remote Shutter Release
Cable is a compact and
easy-to-use remote switch
that allows you to
activate all the
functions of your
camera's shutter release
button without touching
your camera. This is
useful when making long
exposures and to avoid
camera movement. To
activate your camera's
focus, simply press the
shutter button down half
way. To trigger the
camera's shutter, press
the button completely
down. for long exposures,
press the button down
completely and slide it
in the direction of the
arrow to lock it in
position. When your
exposure is complete then
slide the remote's button
back into its original
position. Compatible
cameras include the Nikon
D70s, D80. Cable Length:
3 feet (0.9 meters)
Availability: In Stock
£10.00
Available
-
The Shutter Release
Cables with 2.5mm adapter
are designed to be used
with the Calumet Digital
Shutter Timer
Controller with select
Olympus cameras including
the E520, E510, E420,
E410, E400, SP-570 UZ,
SP-560 UZ, SP-550 UZ,
SP-510 UZ.
Availability: In Stock
£5.00
Available
-
Trigger cable for Calumet
4-channel Remote Trigger
CALCF0085 and Olympus
cameras. With this cable
the CF0085 4-channel
remote timer can be used
as a cable release or as
a wireless remote trigger
(2 X CF0085). Always turn
off camera/CF0085 before
running the cable.
Availability: In Stock
£20.00
Available
-
Hahnel Captur Timer Kit
for Canon Wireless Remote
Shutter Release & Timer
Remote. Features: Ideal
for time-lapse
photography Time Lapse &
Bulb Exposures Single /
Continuous / Bulb Modes
Two Timing Sequences
Connect to camera with
connector cables supplied
DCM - Digital Channel
Matching AA Battery
Powered 100m Range
Additional receivers
available to fire
multiple DSLR’s Can be
integrated with other
Captur Modules Larger
easy to read LCD
Availability: In Stock
£79.00
Available
-
Cactus SC-1 Shutter Cable
for Canon SLR Cameras
Compatible for: Canon:
DSLR: EOS 1200D, 1100D,
1000D, 700D, 650D,
600D, 550D, 500D,
450D, 400D, 350D,
300D, 100D, 70D, 60Da,
60D, Rebel SL1, Rebel
T5i, Rebel T5, Rebel
T4i, Rebel T3i, Rebel
T3, Rebel T2i, Rebel
T1i, Rebel XSi, Rebel
XS, Rebel XTi, Rebel
XT, Rebel, Kiss X70,
Kiss X50, Kiss X7, Kiss
X6, Kiss X5, Kiss X4,
Kiss X3, Kiss X2, Kiss
X, Kiss N, Kiss F,
Kiss, Kiss 7x,
PowerShot G16, G1X II,
G1X; SLR: EOS ELAN 7/7E,
ELAN 7NE, ELAN II/IIE,
Rebel 2000, Rebel GII,
Rebel G, Rebel T2,
Rebel Ti, Rebel XS, IX
Lite, 3000, 300, 300V,
50E, 50, 33, 30;
Availability: In Stock
£13.00
Available
-
Pocket Wizard CM-E3-ACC
Pre-Trigger Remote Cable
This is a special remote
shutter release cable
called a Pre-Trigger
Cable. A Pre-Trigger
cable controls both the
half-press and full-press
function of your remote
camera’s shutter
release. When a camera is
“pre-triggered”, it
is like holding your
camera’s shutter
release button in the
half-pressed or
metering/focusing
position. This –ACC
cable allows a compatible
PocketWizard radio to
independently control
both half-press and
full-press functions.
Added bonus: All
CM-E3-ACC cables shipped
into the market starting
July/August 2013 include
a MSMM Adapter (stereo to
mono miniphone) which
converts a CM-E3-ACC
cable to a standard CM-E3
miniphone cable. This
change coincides with the
introduction of our new
retail packaging. All
cables are now packaged
in a environmental
friendly cardboard box
with rececyled white
labels showing both ends
of the cable as well as
compatibility list. This
replaces our old
packaging of a zipped bag
packaging.A Standard
Cable (CM-E3) works with
most PocketWizard radios
but has no half-press
control, and is for
basic remote triggering
only. (Using a CM-E3-ACC
cable with a MSMM Adapter
will provide the same
function as a CM-E3
cable.) A Pre-Release or
Pre-Trigger (–P) Cable
(CM-E3-P) works with most
PocketWizard radios. This
pre-trigger cable has a
switch that allows you to
toggle half-press on or
off at the camera
position, but not
remotely. (Using a
CM-E3-ACC cable with a
PTMM Adapter will provide
the same function as a
CM-E3-P cable.)
Availability: In Stock
£24.00
Available
-
Pocket Wizard CM-E3-ACC-1
Pre-Trigger Remote Cable
This is a special remote
shutter release cable
called a Pre-Trigger
Cable. A Pre-Trigger
cable controls both the
half-press and full-press
function of your remote
camera’s shutter
release. When a camera is
“pre-triggered”, it
is like holding your
camera’s shutter
release button in the
half-pressed or
metering/focusing
position. This –ACC
cable allows a compatible
PocketWizard radio to
independently control
both half-press and
full-press functions.
Added bonus: All
CM-E3-ACC cables shipped
into the market starting
July/August 2013 include
a MSMM Adapter (stereo to
mono miniphone) which
converts a CM-E3-ACC
cable to a standard CM-E3
miniphone cable. This
change coincides with the
introduction of our new
retail packaging. All
cables are now packaged
in a environmental
friendly cardboard box
with rececyled white
labels showing both ends
of the cable as well as
compatibility list. This
replaces our old
packaging of a zipped bag
packaging.A Standard
Cable (CM-E3) works with
most PocketWizard radios
but has no half-press
control, and is for
basic remote triggering
only. (Using a CM-E3-ACC
cable with a MSMM Adapter
will provide the same
function as a CM-E3
cable.) A Pre-Release or
Pre-Trigger (–P) Cable
(CM-E3-P) works with most
PocketWizard radios. This
pre-trigger cable has a
switch that allows you to
toggle half-press on or
off at the camera
position, but not
remotely. (Using a
CM-E3-ACC cable with a
PTMM Adapter will provide
the same function as a
CM-E3-P cable.)
Availability: In Stock
£22.00
Available
-
For all cameras with a
cable release plug.
Controls the automatic
diaphragm between the
camera and the bellows
focusing attachment PB-6
release plug.
Availability: In Stock
£105.00
Available
-
Features: Compact and
lightweight remote
Speedlight Unit Supports
the Nikon Creative
Lighting System (CLS) and
compatible CLS cameras
Easy-to-set analog
controls Built-in target
light and AF Illuminator
allows for proper
position of Speedlight on
the subject as well as
autofocus operation in
low light situations
i-TTL Flash control for
accurate flash exposures
in close-up and other
multiple lighting
applications Can be set
to one of three
Speedlight Groups (A, B
and C) Offers four
independent channels for
competitive shooting
environments Integrates
perfectly into multiple
flash situations
including the SB800 and
SB-600 Speedlight units
Availability: In Stock
£145.00
Available
-
Use the FlexTT5
Transceiver with the
MiniTT1 Transmitter to
control single or
multiple off-camera
electronic or intelligent
i-TTL / CLS Speedlights.
You can now place TTL or
manual flashes anywhere
to illuminate the scene:
Around corners,
out-of-sight and in
bright sunlight. The
MiniTT1 and FlexTT5 are
compatible with any
PocketWizard radio for
triggering manual flash
or remote cameras.
ControlTL™
PocketWizard’s newest
firmware platform taps
into the camera’s
digital communications to
enable an entirely new
level of remote flash
capability through our
proven radio system.
ControlTL allows remote
i-TTL for Nikon CLS /
i-TTL systems as well as
Manual Power Control.
ControlTL firmware is
configurable and
upgradeable for
“future-proof”
continuous improvement.
Dedicated CLS / i-TTL
Triggering Locking your
FlexTT5 Transceiver into
the hot shoe of a Nikon
DSLR camera, and
mounting CLS / i-TTL
flashes onto FlexTT5
Transceivers gives you
full flash exposure
control with the freedom
and reliability of a
PocketWizard radio. There
are no special settings
to make or modes to call
up. Use the camera’s
exposure compensation
controls for basic
control of remote
flashes, or add an AC3
ZoneController or Nikon
Master unit for even more
flexibility. Manual Power
Control Adjust the manual
power settings of your
remote Nikon Speedlights
directly from a SB-800,
SB-900 flash or
PocketWizard AC3
ZoneController mounted on
your on-camera FlexTT5.
Working with a Nikon
SB-800, SB-900 or AC3 in
the shoe of the FlexTT5,
you can independently
control the power output
of up to three remote
groups of lights (you can
have as many lights in
each group as you want)
from full power down to
the lowest setting. Now
you can work with total
control with your remote
lights, without leaving
your shooting position.
Nikon SU-800 Wireless
Speedlight Commander may
also be used. Zone Select
The FlexTT5 Transceiver
has an A-B-C zone select
switch to allow use with
the remote groups/zones
found on on the
PocketWizard AC3
ZoneController or Nikon
flashes. Zones allow you
to control single or
groups of lights
independently from other
lights in different
zones. These zones can
also be used with a
MuiltiMAX thus allowing
you to pair a single
MultiMAX radio on camera
with FlexTT5's
Transceivers on your
remote flashes and
utilize many of the
MultiMAX's advance
trigger functions.
HyperSync™ Our patent
pendingHyperSync
technology allows
photographers to achieve
faster X-sync speeds,
sometimes up to 1/8000 of
a second, with full
power flash. Now you can
cut the ambient light and
use wide-open apertures,
outdoors in bright
sunlight. HyperSync
automatically adjusts the
timing of your flash
trigger so that faster
than X-sync speeds can be
achieved. With certain
Canon camera and flash
combinations, you can
achieve sync all the way
to 1/8000th of a second.
Just imagine what you can
do using flash in bright
sun with wide open
apertures and fast
shutter speeds. Since
HyperSync is a trigger
function you can use any
PocketWizard Receiver
including the FlexTT5,
PlusII or MultiMAX.
HyperSync works with both
TTL speedlites and full
size studio flash. Please
visit
https://wiki.pocketwizard.com/hyperSyncfor
configuring HyperSync.
While performance varies
by the camera and flash
equipment being used,
HyperSync will get the
maximum possible out of
any set-up. HyperSync™
Automation With ControlTL
Firmware Update 3.0
(Nikon) and 6.0 (Canon),
configuring HyperSync has
now been automated.
HyperSync Automation
adjusts HyperSync timing
in two separate places
– on the transmitter
and on the receiving
ControlTL radio. The
transmitting or on-camera
MiniTT1 or FlexTT5
automatically adjusts
HyperSync to compensate
for changes made to
shutter speed.
Photographers can further
refine HyperSync via the
PocketWizard Utility. For
more information on
Configuring HyperSync
Automation, visit the
HyperSync section of the
PocketWizard Wiki. High
Speed Sync / FP When
HyperSync can’t keep
up, FP/High Speed Sync
takes over for Speedlight
flash photography all the
way to 1/8000. Use this
feature to shoot wide
open in bright sun for
amazing results.
ControlTL optimizes this
amazing feature by
shortening the flash
burst to the precise
amount needed resulting
in faster recycling times
and more flashes per
battery set when shooting
in Nikon's HSS/FP Flash
mode. High Speed Sync
(HSS / FP Sync) Disable
Mode Select either HSS
Sync or HyperSync™ at
shutter speeds above
x-sync. This allows you
to use HyperSync and the
benefit of full power
flash all the way up to
1/8000 with certain flash
systems. Rear Curtain
Sync Precise rear curtain
sync capability is
engaged using the
camera's sync settings.
Capture natural light
trails with sharp
exposures at the end –
no “after trails!”
Pre-Flash Boost Nikon
flashes use a dual
preflash system to
calculate i-TTL exposure
values. In many TTL
situations, including
shooting in full sun,
over long distance or
using diffusers or bounce
flash, the normal
pre-flash is simply not
enough for the camera to
see. PocketWizard's
Pre-Flash Boost increases
your remote Nikon flashes
first preflash by three
stops and, if necessary,
the second preflash by
one stop. The boost level
can also be adjusted at
the flash if necessary.
PowerTracking When
working with the
PowerST4, PowerMC2 and
AC9/FlexTT5 paired with
compatible manual
flashes, you can change
any of your settings on
your camera and the
system adjusts for those
changes. Change your
exposure compensation to
adjust the exposure or
make adjustments in
aperture or ISO and the
system balances your
flash for proper
exposure. Basic Trigger
Mode Allows the FlexTT5
to work as a transmitter
on ANY camera it will
fit. PocketWizard
Compatible The MiniTT1
sends out two trigger
signals; one on the new
ControlTL channels, and
another on the same
channels as all standard
trigger PocketWizard
radios, so they will
work with any unit you
may already have.
PocketWizard Utility -
Programmable and
Upgradeable Use the
supplied PocketWizard
Utility software with the
on-board USB port to
program the FlexTT5 to
any PocketWizard channel
and zone as well as many
other custom settings.
The FlexTT5 can be
upgraded whenever updates
and feature enhancements
are available (many
planned!). Auto-Sensing
Transceiver Technology
PocketWizard's
Auto-Sensing Transceiver
Technology enables the
FlexTT5 Transceiver to
switch back and forth
between Transmitter and
Receiver modes as needed
for greater flexibility
on the job. All
PocketWizard Transceivers
default to Reciever mode.
When a hot shoe or other
trigger is detected, it
automatically switches to
Transmitter mode.
Auto-Relay Mode Easily
trigger a remote camera
in sync with distant
remote flashes with
Auto-Relay Mode. Put a
camera where you can't be
and have remote TTL or
manual lighting at the
same time. Expand your
coverage and increase
your creativity. Channels
/ Learn Mode The FlexTT5
has two channel
configuration settings;
C1 and C2. Each can be
programmed as needed with
up to 20 ControlTL
channels* for TTL
photography or Manual
Power Control, or 32
standard channels** for
manual flash photography.
Channels can be
configured with the
PocketWizard utility or
use the Learn function to
quickly program channels,
or the reset function to
configure back to factory
settings.*- 20 ControlTL
channels for FCC/IC 344
MHz radios and three
ControlTL channels for CE
433 MHz radios.** - 32
Standard channels for
FCC/IC 344 MHz radios and
35 Standard channels for
CE 433 MHz radios.
ZoneControl Add the AC3
ZoneController on top of
your FlexTT5 and gain
three zones of power
control right from the
camera’s position.
Works in both
auto/CLS/i-TTL and
manual. Shut down an
entire zone with the
flick of a switch.AC3
ZoneController sold
separately. SpeedCycler
with an AC3
ZoneController Previously
only seen with
PocketWizard’s MultiMAX
radios, this new mode is
designed to rapidly cycle
through multiple flash
units fired individually
in sequence. This allows
photographers to fire a
camera in sync with
flashes faster than a
single flash unit can
recycle. It can also be
used for triggering
remote cameras
sequentially. SpeedCycler
is engaged on a
transmitting MiniTT1 or
FlexTT5 via the
PocketWizard
Utility.SpeedCycler mode
requires an AC3
ZoneController in the top
hot-shoe of the on-camera
PocketWizard radio. Zones
A, B, and C will be
triggered sequentially
and individual zones can
be disabled by setting
the AC3’s Zone Switch
to the off position. Both
TTL and manual flash
controls are supported.
Flash Power Control
without a Camera
Photographers can now
take their AC3 and
transmitting radio
off-camera and use it to
set power levels for any
flash with a ControlTL
receiver, making it more
convenient to use an
optically triggered light
meter, or control the
power levels with just a
MiniTT1/FlexTT5 and AC3
in their hand while
another photographer
takes the pictures.
Previously, an AC3
ZoneController on a
MiniTT1 or FlexTT5 needed
to be on camera to send
manual power levels to
remote flashes. Now,
when connected to a
MiniTT1 or FlexTT5,
manual power levels are
transmitted to remote
flashes when the TEST
button is pressed even
when the transmitter is
off the camera. This
affects both speedlights
connected to receiving
FlexTT5s and larger
flashes like AlienBees
and Elinchrom RX units
with ControlTL receivers.
Camera/Flash Ports The
FlexTT5 Transceiver has
two plug-in ports for use
with remote CLS / i-TTL
cameras and other flash
units, including studio
strobes. With its
auto-relay function, the
FlexTT5 can trigger a
remote camera and
transmit to a remote
strobe. Continuous Fast
FPS Never before have you
been able to shoot remote
CLS / i-TTL non-stop in
continuous high-speed
mode. Fill the buffer!
Nothing else comes close.
Low-Profile Design The
FlexTT5 lies flat, stays
out of the way and
features a flip-up
antenna for additional
range when needed. Auto
Trigger Select for
ControlTL The hot shoe on
both the MiniTT1 and Flex
TT5 will trigger just
about any hot shoe flash
placed into it in
addition to the Nikon
Speedlight's it is
designed for. Yes, you
can now fire just about
any hot shoe flash
including Vivatar,
Canon, etc., in manual
mode only and not TTL
mode. (max trigger
voltage < 50V, use P2
port for up to 200V)
Built-in Hot Shoe Lock
your Canon flash into the
FlexTT5’s dedicated hot
shoe and combine your
remote flash with
on-camera flash or use
the on-camera flash for
additional CLS / i-TTL or
Manual Power Control
only. The metal and glass
reinforced resin hot shoe
assembly is a
superstructure onto
itself and incredibly
durable. The best part;
no more cords. Continuous
Remote Camera Triggering
This allows for
triggering a continuous
motor drive burst of a
camera connected to the
P1 port on a remote
FlexTT5. Transmit Only
Mode This prevents an
incoming trigger signal
firing your on-camera
FlexTT5 and flash, in
situations where multiple
photographers are using
the same set of remote
PocketWizard radios.
Availability: In Stock
£199.00
Available
-
This remote control O-RC1
allows shutter release,
lens zooming and Fn
button. Waterproof and
weatherproof, it can
fall in to water without
damage. Compatible with
X-5 and X90 bridge
cameras, Optio VS20,
WG-4/ GPS, WG-20,
WG-10, WG-3/ GPS, WG-2/
GPS, WG-1/ GPS, W90
compact cameras, all
PENTAX SLR cameras and
PENTAX medium format.
Availability: In Stock
£25.00
Available
-
The Hahnel Giga T Pro is
a combined wireless and
timer controlled remote
shutter release. It is
ideal for a wide variety
of photographic uses that
require timed or
contact-free shutter
release, including
wildlife, long exposure,
astral, studio and
time-lapse photography.
Designed for use with
Canon DSLR's this version
includes interchangeable
connectors for use with
the different models.
Availability: In Stock
£79.99
Available
-
Triggertrap Mobile Dongle
& E3 Cable Kit For Canon
MD3-E3 Are you ready to
take yourCanon camera
remote release into the
current millennium? Well,
by golly, have you come
to the right place.
You'll need our
award-winning Triggertrap
Mobile App and a
connection kit. Download
the app to your iPhone,
iPad or Android device,
and use the Triggertrap
Mobile kit to connect
your smartphone to your
camera. Voila and
congratulations, you've
added a ton of smart
features to your camera,
including: Remote Release
mode (press to take a
photo) 3 different long
exposure remote modes
(timed remote,
press-and-hold, press to
start and press to stop)
5 different timelapse
modes, including Star
Trail, GPS-based
DistanceLapse, and
TimeWarp™ 13-exposure
HDR mode Sound trigger
Vibration trigger (iOS
only) Facial recognition
trigger (iOS only) Motion
trigger (iOS only) Sunset
calculator And much,
much more. You can
download app here:
http://www.triggertrap.com/products/apps/products/apps/triggertrap-mobile/1
Availability: In Stock
£29.99
Denmark