Pet Porte Smart Flap made from UV resistant plastic has an integrated chip reader which only lets your own cat go through the flap. There is no need for dangerous cat collars & uninvited guests can´t get in. An integrated transponder reader reads the number on your cat´s micro chip. The transponder can be programmed to recognise chip numbers for up to 32 cats. An integrated light sensor reacts to various shades of darkness & enables you to stop your cat going outside when it gets dark. A pet chip consists of a glass tube about the size of a grain of rice. This tube contains a microchip with a unique identification number. Using an appropriate chip reader vets can read the information contained e.g. the name of the cat & owner & its address. The Pet Porte Smart Flap uses this identification number as an access code for your cat (s) or other pets that will fit through a flap. Even small dogs can use this flap
- & all those who don´t have a matching number have to stay outside. The flap uses a safe low-voltage power supply for continuous operation. The power consumption is minimal at around 3 – 4 watts & an additional back-up battery (USV) guarantees uninterrupted power supply for example during power cuts. The electric power supply enables a wide reach for chip recognition. The tunnel extension which is included in the deliver extends the interior lining to 4cm depth. Further tunnel extensions allow you to adjust the tunnel length according to your needs. Advantages No dangerous collars needed Keeps stray cats out Transponder chip reader recognises your pet´s chip & can be programmed to allow entry up to 32 chipped cats Magnetic wind stop prevents flap from banging Insulating fleece draught excluder Easy to operate – only two buttons 2 symbol lamps to indicate operating modus Adjustable locking time from 1 to 25 seconds Child safety lock to prevent unintended programming Back-up battery ensures that programmed chip numbers are retained if there is a power failure Fits conventional cut-outs of 17 cm or 21 cm Can be fitted in glass doors Works for all pets with European microchip Developed by a vet Can be installed in metal doors. The performance is not affected by metal 3 years manufacturer guarantee Programming options All cats (with or without chip) can go in & out All cats can go in no cats can go out Only cats whose microchip number has been programmed in can enter. All cats can go out. Only cats whose microchip number has been programmed in can enter but cannot go out Adjustable light sensor restricts access to outside at dark Can be set to sound a signal at the cat´s entry Included in delivery 1 P
...

Pet Porte Smart Flap made from UV resistant plastic has an integrated chip reader which only lets your own cat go through the flap. There is no need for dangerous cat collars & uninvited guests can´t get in. An integrated transponder reader reads the number on your cat´s micro chip. The transponder can be programmed to recognise chip numbers for up to 32 cats. An integrated light sensor reacts to various shades of darkness & enables you to stop your cat going outside when it gets dark. A pet chip consists of a glass tube about the size of a grain of rice. This tube contains a microchip with a unique identification number. Using an appropriate chip reader vets can read the information contained e.g. the name of the cat & owner & its address. The Pet Porte Smart Flap uses this identification number as an access code for your cat (s) or other pets that will fit through a flap. Even small dogs can use this flap
- & all those who don´t have a matching number have to stay outside. The flap uses a safe low-voltage power supply for continuous operation. The power consumption is minimal at around 3 – 4 watts & an additional back-up battery (USV) guarantees uninterrupted power supply for example during power cuts. The electric power supply enables a wide reach for chip recognition. The tunnel extension which is included in the deliver extends the interior lining to 4cm depth. Further tunnel extensions allow you to adjust the tunnel length according to your needs. Advantages No dangerous collars needed Keeps stray cats out Transponder chip reader recognises your pet´s chip & can be programmed to allow entry up to 32 chipped cats Magnetic wind stop prevents flap from banging Insulating fleece draught excluder Easy to operate – only two buttons 2 symbol lamps to indicate operating modus Adjustable locking time from 1 to 25 seconds Child safety lock to prevent unintended programming Back-up battery ensures that programmed chip numbers are retained if there is a power failure Fits conventional cut-outs of 17 cm or 21 cm Can be fitted in glass doors Works for all pets with European microchip Developed by a vet Can be installed in metal doors. The performance is not affected by metal 3 years manufacturer guarantee Programming options All cats (with or without chip) can go in & out All cats can go in no cats can go out Only cats whose microchip number has been programmed in can enter. All cats can go out. Only cats whose microchip number has been programmed in can enter but cannot go out Adjustable light sensor restricts access to outside at dark Can be set to sound a signal at the cat´s entry Included in delivery 1 P
...

Whether you are looking for a way to keep your dog warm after a rainy walk, a swimming session in the sea, or a bath at home, this cuddly blue Microfibre Dog Coat is a great practical addition to your dog’s wardrobe! Thanks to the microfibre material, this Microfibre Dog Coat is extremely lightweight & particularly absorbent, offering excellent moisture intake. In just a matter of moments, your dog will be happily dry again! The coat also helps to protect your dog from getting cold after baths & prevents water & mud being spread around when your dog shakes itself clean. The leg & tail openings ensure that the Microfibre Dog Coat does not slip around. It also has a click fastener on the back to ensure a secure fit for this bathrobe. When the time comes to wash the Microfibre Dog Coat, simply put it in the washing machine at 30°C. The microfibre material offers cosiness & cleanliness for you & your dog! Microfibre Dog Coat at a glance: Soft, blue bathrobe for dogs Absorbent microfibre: to dry your dog in no time Protects your dog from getting cold Tail opening: no slipping Click fastener on the back: for a secure fit Clean solution: prevents dirt & water being spread around

Material: Coat: 100% polyester (microfibre) Click fastener: plastic

Colour: blue Care instructions: machine washable at 30°C Sizing chart for Microfibre Dog Coat: Size Back length (A1) Back length (A2) Collar length (B) Neck circumference (C) Waist & chest circumference (D) (Adjustable) Coat width (E) Total length (F) Suitable for: S 39 cm 30 cm 6.5 cm up to 44 cm approx. 40
- 57 cm approx. 27 cm approx. 45 cm Jack Russell, Yorkshire Terrier M 59 cm 45 cm 10 cm up to 54 cm approx. 58
- 76 cm approx. 35 cm approx. 65 cm Cocker Spaniel L 73 cm 58 cm 13.5 cm up to 66 cm approx. 74
- 90 cm approx. 40 cm approx. 85 cm Border Collie, Labrador XL approx. 83 cm 69 cm 15.5 cm up to 74 cm approx. 90
- 110 cm approx. 45 cm approx. 100 cm St. Bernard, Leonberger, Rottweiler The back length (A1) is measured from the base of the neck to the end of the body. The back length (A1) + the collar length (B) is the total length of the coat. The back length (A2) is measured from the base of the neck to the tail. The neck circumference (C) is measured at the base of the neck. The chest circumference (D) is measured directly behind the front legs. The maximum coat width (E) is measured downwards from the middle of the back to just above the hind leg & then doubled. The total sideways length (F) is measured along the side from the front of the chest to the end of the body. Note on sizing: Please be sure to measure your dog's back length from the base of the neck above the withers to the base of the tail. Refer to the image above. The model used for the image is a Parson Russell Terrier wearing a size S. The pictured Golden Retriever wears a size L & the Poodle wears a size XL.







...

Whether you are looking for a way to keep your dog warm after a rainy walk, a swimming session in the sea, or a bath at home, this cuddly blue Microfibre Dog Coat is a great practical addition to your dog’s wardrobe! Thanks to the microfibre material, this Microfibre Dog Coat is extremely lightweight & particularly absorbent, offering excellent moisture intake. In just a matter of moments, your dog will be happily dry again! The coat also helps to protect your dog from getting cold after baths & prevents water & mud being spread around when your dog shakes itself clean. The leg & tail openings ensure that the Microfibre Dog Coat does not slip around. It also has a click fastener on the back to ensure a secure fit for this bathrobe. When the time comes to wash the Microfibre Dog Coat, simply put it in the washing machine at 30°C. The microfibre material offers cosiness & cleanliness for you & your dog! Microfibre Dog Coat at a glance: Soft, blue bathrobe for dogs Absorbent microfibre: to dry your dog in no time Protects your dog from getting cold Tail opening: no slipping Click fastener on the back: for a secure fit Clean solution: prevents dirt & water being spread around

Material: Coat: 100% polyester (microfibre) Click fastener: plastic

Colour: blue Care instructions: machine washable at 30°C Sizing chart for Microfibre Dog Coat: Size Back length Coat width Collar height Neck circumference Stomach & chest circumference Suitable for: S approx. 39cm approx. 44cm approx. 7cm approx. 22cm approx. 35
- 50cm Chihuahua, Yorkshire Terrier M approx. 59cm approx. 63cm approx. 10cm approx. 27cm approx. 50
- 66cm Jack Russel, Cocker Spaniel L approx. 73cm approx. 80cm approx. 13cm approx. 33cm approx. 66
- 90cm Border Collie, Labrador






...

Whether you are looking for a way to keep your dog warm after a rainy walk, a swimming session in the sea, or a bath at home, this cuddly blue Microfibre Dog Coat is a great practical addition to your dog’s wardrobe! Thanks to the microfibre material, this Microfibre Dog Coat is extremely lightweight & particularly absorbent, offering excellent moisture intake. In just a matter of moments, your dog will be happily dry again! The coat also helps to protect your dog from getting cold after baths & prevents water & mud being spread around when your dog shakes itself clean. The leg & tail openings ensure that the Microfibre Dog Coat does not slip around. It also has a click fastener on the back to ensure a secure fit for this bathrobe. When the time comes to wash the Microfibre Dog Coat, simply put it in the washing machine at 30°C. The microfibre material offers cosiness & cleanliness for you & your dog! Microfibre Dog Coat at a glance: Soft, blue bathrobe for dogs Absorbent microfibre: to dry your dog in no time Protects your dog from getting cold Tail opening: no slipping Click fastener on the back: for a secure fit Clean solution: prevents dirt & water being spread around

Material: Coat: 100% polyester (microfibre) Click fastener: plastic

Colour: blue Care instructions: machine washable at 30°C Sizing chart for Microfibre Dog Coat: Size Back length (A1) Back length (A2) Collar length (B) Neck circumference (C) Waist & chest circumference (D) (Adjustable) Coat width (E) Total length (F) Suitable for: S 39 cm 30 cm 6.5 cm up to 44 cm approx. 40
- 57 cm approx. 27 cm approx. 45 cm Jack Russell, Yorkshire Terrier M 59 cm 45 cm 10 cm up to 54 cm approx. 58
- 76 cm approx. 35 cm approx. 65 cm Cocker Spaniel L 73 cm 58 cm 13.5 cm up to 66 cm approx. 74
- 90 cm approx. 40 cm approx. 85 cm Border Collie, Labrador XL approx. 83 cm 69 cm 15.5 cm up to 74 cm approx. 90
- 110 cm approx. 45 cm approx. 100 cm St. Bernard, Leonberger, Rottweiler The back length (A1) is measured from the base of the neck to the end of the body. The back length (A1) + the collar length (B) is the total length of the coat. The back length (A2) is measured from the base of the neck to the tail. The neck circumference (C) is measured at the base of the neck. The chest circumference (D) is measured directly behind the front legs. The maximum coat width (E) is measured downwards from the middle of the back to just above the hind leg & then doubled. The total sideways length (F) is measured along the side from the front of the chest to the end of the body. Note on sizing: Please be sure to measure your dog's back length from the base of the neck above the withers to the base of the tail. Refer to the image above. The model used for the image is a Parson Russell Terrier wearing a size S. The pictured Golden Retriever wears a size L & the Poodle wears a size XL.







...

The Mighty Mutts™ Tough Dog Toys Rubber Ball is just the thing for excitable dogs with sharp teeth, saving you the hassle of replacing your dog's toys after only a few days of intense play & wild chew attacks. This red ball made from hard-wearing thermoplastic rubber (TPR) is guaranteed to last at least 3 years. This fun bouncing ball is available in two different sizes for medium- or large-breed dogs. Its hollow centre can be filled with tasty treats, guaranteeing long-lasting fun, while the special surface of the revolutionary material encourages your dog to chew, promoting healthy teeth & gums. The Mighty Mutts™ Tough Dog Toys Rubber Ball also floats, making it ideal for games of fetch both on land & in water. Thanks to its high levels of durability, this exciting dog toy will provide your dog with hours of fun for years to come. Mighty Mutts™ Tough Dog Toys Rubber Ball at a glance: Durable dog toy for chewing & games of fetch 2 different

Sizes: ideal for medium-sized or large dogs Ultra-robust: made from thermoplastic rubber (TPR) & capable of withstanding even wild chew attacks 3 year manufacturer’s warranty: long-life guarantee from the product’s manufacturer, Interpet Can be filled with treats: hollow ball suitable for filling with snacks Long-lasting fun: appealing texture & high levels of durability help to keep your dog occupied, whether playing alone or with you Floating toy: for games of fetch by lakes or at the seaside Dental care: special surface promotes healthy gums & teeth

Colour: red

Material: TPR Size Guide for the Mighty Mutts™ Tough Dog Toys Rubber Ball: Size Diameter Opening for Treats M 8cm 2.5-4.5cm L 9.5cm 3-5.5cm Please note: No toy is completely indestructible. As with any other product, please supervise your pet with this toy. Check the product regularly for damage, & replace the toy if it is damaged or missing any pieces to avoid potential injury to your pet.





...

The Mighty Mutts™ Tough Dog Toys Rubber Ball is just the thing for excitable dogs with sharp teeth, saving you the hassle of replacing your dog's toys after only a few days of intense play & wild chew attacks. This red ball made from hard-wearing thermoplastic rubber (TPR) is guaranteed to last at least 3 years. This fun bouncing ball is available in two different sizes for medium- or large-breed dogs. Its hollow centre can be filled with tasty treats, guaranteeing long-lasting fun, while the special surface of the revolutionary material encourages your dog to chew, promoting healthy teeth & gums. The Mighty Mutts™ Tough Dog Toys Rubber Ball also floats, making it ideal for games of fetch both on land & in water. Thanks to its high levels of durability, this exciting dog toy will provide your dog with hours of fun for years to come. Mighty Mutts™ Tough Dog Toys Rubber Ball at a glance: Durable dog toy for chewing & games of fetch 2 different

Sizes: ideal for medium-sized or large dogs Ultra-robust: made from thermoplastic rubber (TPR) & capable of withstanding even wild chew attacks 3 year manufacturer’s warranty: long-life guarantee from the product’s manufacturer, Interpet Can be filled with treats: hollow ball suitable for filling with snacks Long-lasting fun: appealing texture & high levels of durability help to keep your dog occupied, whether playing alone or with you Floating toy: for games of fetch by lakes or at the seaside Dental care: special surface promotes healthy gums & teeth

Colour: red

Material: TPR Size Guide for the Mighty Mutts™ Tough Dog Toys Rubber Ball: Size Diameter Opening for Treats M 8cm 2.5-4.5cm L 9.5cm 3-5.5cm Please note: No toy is completely indestructible. As with any other product, please supervise your pet with this toy. Check the product regularly for damage, & replace the toy if it is damaged or missing any pieces to avoid potential injury to your pet.





...

The Mighty Mutts™ Tough Dog Toys Rubber S-Bone can withstand even the wildest chew attacks, however sharp your dog’s teeth. This red, S-shaped dog bone from the Mighty Mutts™ range is made from extra robust thermoplastic rubber (TPR) & is guaranteed to last at least 3 years. The special surface of this revolutionary material encourages your dog to chew, promoting healthy teeth & gums. This extra-long bone toy is especially suitable for medium- & large-breed dogs. Its hollow centre can be filled with tasty treats through the 3cm-wide openings at each end, guaranteeing long-lasting fun. The Mighty Mutts™ Tough Dog Toys Rubber S-Bone also floats, making it ideal for games of fetch both on land & in water. Thanks to its high levels of durability, this exciting dog toy will provide your dog with hours of fun for years to come. Mighty Mutts™ Tough Dog Toys Rubber S-Bone at a glance: Durable dog toy for chewing & games of fetch 32cm-long: ideal for medium-sized & large dogs Ultra-robust: made from thermoplastic rubber (TPR) & capable of withstanding even wild chew attacks 3 year manufacturer’s warranty: long-life guarantee from the product’s manufacturer, Interpet Can be filled with treats: hollow bone with approx. 3cm-wide openings at each end for filling with snacks Long-lasting fun: appealing texture & high levels of durability help to keep your dog occupied, whether playing alone or with you Floating toy: for games of fetch by lakes or at the seaside Dental care: special surface promotes healthy gums & teeth

Colour: red

Material: TPR Dimensions: 32 x 9 x 5 cm (L x W x H) Please note: No toy is completely indestructible. As with any other product, please supervise your pet with this toy. Check the product regularly for damage, & replace the toy if it is damaged or missing any pieces to avoid potential injury to your pet.



...

Please note: This product might take a little longer to arrive as it may be shipped from outside the UK. The Milan Dog Bed brings a hint of Italian design to your home. This eye-catching bed also serves as a comfortable spot for your pooch to curl up. With its charming colour scheme & fun zigzag pattern, this accessory is a decorative addition to any home. The Milan Dog Bed features a thick, high boarder that is cosy to lean against & will encourage your dog to snuggle up. The squishy, reversible cushion adds a touch of comfort. The dipped entrance makes it easy for small or senior dogs to climb effortlessly in. This bed offers protection from the cold floor & is both hard-wearing & easy to clean. Milan Dog Bed at a glance: Modern dog bed High, thick boarder: ideal for leaning against, holds its shape Reversible cushion: thick padding, different colours Low entrance: suitable for old & small pets Attractive design: tasteful colour scheme, decorative zigzag patten Soft sleeping area: protects from the cold floor, very comfortable Hard-wearing material, tear-resistant & durable Easy to clean in the washing machine Modern design from Italy

Colour: light blue/ dark blue/ turquoise/ beige

Material: Cover: 100% polyester Padding: 100% polyester wool Underside: PVC Care instructions: machine washable at 30°C Sizing chart: Size Total

Dimensions Sleeping area Boarder thickness Entrance height Cushion M 85 x 70 x 24cm (L x W x H) approx. 51 x 44cm (L x W) approx. 17cm approx. 10cm approx. 60 x 50cm L 110 x 85 x 28cm (L x W x H) approx. 70 x 58cm (L x W) approx. 20cm approx. 80 x 60cm





...

This padded, quilted Milan Dog Coat is a particularly stylish & practical accessory for your dog. It is made from waterproof nylon with a warm fleece inner, making it perfect for the wet, cold months of the year. This high-quality winter coat features a collar & removable hood with a trendy plush border, designed to keep your dog cosy & warm & help protect against wet, cold & dirt. The Milan Dog Coat is ideal for frosty temperatures, as well as for sensitive dog breeds with little undercoat, older dogs & those used to living indoors, offering protection against the cold. The coat has a double-breasted Velcro fastener, perfect for adapting it to your dog’s shape. It also has arm holes, which cover the shoulder blades & upper section of the front legs. The Milan Dog Coat also has knitted cuffs around the arms & end of the coat, to provide a really comfortable fit. A high collar underneath the hood, a hole for fastening in a lead & two artificial pockets with poppers on the back of the coat make it particularly stylish. This stylish Milan Dog Coat is designed for high protection & optimum comfort! Milan Dog Coat at a glance: Stylish winter coat for small to medium dogs Ideal for the colder months: cuddly fleece inner that is particularly soft & warm Hood with trendy plush border: can be removed using poppers Waterproof, robust outer

Material: high quality & well made With practical arms: to keep shoulder blades & upper arms warm Double-breasted Velcro fastener: to fit your dog’s body shape perfectly Knitted cuffs: on the arms & base of the coat High collar Opening in the back: to easily attach a lead to your dog’s collar

Colour: black

Material: Outer: 100% nylon Inner padding: 100% polyester (fleece) Fur hood border: 100% polyester (tufted plush) Padding: polyester fleece Care instructions: machine washable at 30°C Sizing table for Milan Dog Coat: Size Back length (A) (middle) Collar height (B) (middle) Hood height (middle) (C) Neck circumference (D) (adjustable through Velcro straps) Chest circumference (E) (adjustable through Velcro straps) Total length (F) (side) 30 33cm 6cm 16cm approx. 29
- 33cm approx. 39
- 43cm 35cm 35 38cm 7cm 17cm approx. 34
- 38cm approx. 44
- 48cm 40cm 40 42cm 7cm 18cm approx. 38
- 42cm approx. 49
- 53cm 45cm 45 49cm 7cm 19cm approx. 42
- 48cm approx. 54
- 62cm 50cm The back length (A) should be measured from the base of the neck to the base of the tail. Back length (A) + collar height (B) is the total back length of the coat. The hood height (C) should be measured from the base of the collar to the top of the head. The neck circumference (D) should be measured around the lowest point of the base of the neck. The chest circumference (E) should be measured directly behind the front legs. The total side length (F) should be measured from the front of the chest over the flank to the rear. Our dog model (Dachshund) wears a size 30, the Parson Russel wears a size 40.













...