This elegant Solar Pitcher Cascade Water Feature will bring a stylish look to your garden!
Perfect for the upcoming summer months, this traditional Solar Pitcher Cascade is ideal for creating a relaxed atmosphere within your garden. The classy dark red terracotta effect finish will make this product stand out, wherever you decide to use it. Water cascades down the pitcher, before constantly recycling itself, ensuring you don’t need to refill it. Powered by an integrated solar panel, the low voltage pump enables this to happen, creating a lovely, relaxing effect. As it incoporates renewable energy, there are no wiring or running costs incurred.
However this versatile product also incorpartes Smart Solar’s ‘Solar On Demand’, featuring an integral solar pump, panel and battery system with an on/off switch, which enables the feature to be used at night or in inclement conditions. Therefore you have the option of battery power aswell as solar, so you can use the water cascade exactly for the length of time you need it.
Where the Solar Pitcher Cascade can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Pitcher Cascade works:
The solar pitcher cascade recharges itself each day using the sun’s rays. Simply ensure that the pitcher is placed in direct sunlight. Typically, the pitcher works for 6 hours on full charge. Either choose to use the pitcher daily, or save the charge for when you wish to use it. If turned on, the LED lights will switch on automatically at dusk, and deactivate themselves at dawn. Alternative choose to use batteries to power the pitcher exactly when you need it.
How the Solar Pitcher Cascade is installed:
Assemble using instructions provided
Simply switch on/off on the underside of the solar panel
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
This stunning Solar Umbrella Fountain will bring an innovative look to your garden!
A brand new product in our summer range, impress your family and friends this summer with this beautiful Solar Stone Effect Umbrella Fountain. Made from a resin grey weatherstone finish, it can be used in a variety of places, and works as a gorgeous decorative piece wherever you use it. The low voltage water pump constantly recycles the water throughout the day, ensuring that you won’t have to keep refilling it. This is charged by an integrated solar panel, which recharges the umbrella fountain constantly. By incorporating solar power, there are no wiring or running costs incurred with this product.
Where the Stone Effect Umbrella Fountain can be used:
Garden Decor
Patios
Balconies
Decking Areas
Rockeries
How the Stone Effect Umbrella Fountain works:
An integrated solar panel recharges the umbrella fountain throughout the day. Simply ensure that it is placed in direct sunlight during the daytime. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Stone Umbrella Fountain is installed:
Remove from packaging and use instructions provided
Place in your desired area
Switch the on/off button underneath the solar panel
Make sure that the fountain is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Provide oxygenation for ponds in hot, sunny conditions with this Solar Oxygenator Air Pump!
Brand new in our range for summer, ensure that your pond is kept oxygenated with this superb Solar Oxygenator Air Pump. Especially suited for ponds that don’t have any oxygenating plants, it is suitable for most small to medium sized ponds (up to 5000 Litres). Powered by an externally mounted solar panel, it has a 3m cable from the solar panel to the pump. The two flexible tubes are 2m long each, and connect from the pump to the 2 submerged air stones.
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Oxygenator can be used:
Water Features
Small Ponds
How the Solar Oxygenator works:
Powered by an externally mounted solar panel, this recharges the Oxygenator throughout the day and keeps it working. The lead length from the solar panel to the Oxygenator is 3m. To ensure optimum power, ensure that the solar panel is placed in direct sunlight.
How the Solar Oxygenator is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
This stunning Solar Umbrella Fountain will bring an innovative look to your garden!
A brand new product in our summer range, impress your family and friends this summer with this beautiful Solar Stone Effect Umbrella Fountain. Made from a resin grey weatherstone finish, it can be used in a variety of places, and works as a gorgeous decorative piece wherever you use it. The low voltage water pump constantly recycles the water throughout the day, ensuring that you won’t have to keep refilling it. This is charged by an integrated solar panel, which recharges the umbrella fountain constantly. By incorporating solar power, there are no wiring or running costs incurred with this product.
Where the Stone Effect Umbrella Fountain can be used:
Garden Decor
Patios
Balconies
Decking Areas
Rockeries
How the Stone Effect Umbrella Fountain works:
An integrated solar panel recharges the umbrella fountain throughout the day. Simply ensure that it is placed in direct sunlight during the daytime. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Stone Umbrella Fountain is installed:
Remove from packaging and use instructions provided
Place in your desired area
Switch the on/off button underneath the solar panel
Make sure that the fountain is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Maintenance free resin in a treetrunk style finish with birds detail
Creates a relaxing atmosphere in your garden, patio or on your balcony
Recycles water from the hidden reservoir
Operates in direct sunlight only
Patented underwater integral solar panel & pump system - European Patent No: 1648620
Low voltage water pump with filter
No wiring, simply install and enjoy
No operating costs
Approximate measurements:
Weight: 60.3cm
Width: 31.8cm
Depth: 42cm
Creates a relaxing atmosphere in your garden, patio or on your balcony with this Smart Solar Ceramic Granite Effect Aphrodite Cascade.
Aphrodite Cascade includes:
- 1 x Large ceramic bowl
- 3 x Smaller ceramic bowls
- 1 x ceramic jug
- Instructions
- Solar panel unit and wiring
- 1 x Pump
- 1 x Tubing
Details:
- Operates in direct sunlight to provide a peaceful flow of cascading water
- Powered by a separate solar panel (supplied) 3m:10ft cable to solar panel
- Low voltage water pump with filter
- No wiring, simply install and enjoy
- No operating costs
Height of Aphrodite Cascade: 49cm
Width of Aphrodite Cascade: 44cm
This stunning Solar Pyramid Fountain will bring an innovative look to your garden!
A brand new product in our summer range, impress your family and friends this summer with this beautiful Solar Pyramid Fountain. Made from natural slate, it can be used in a variety of places, and works as a gorgeous decorative piece wherever you use it. The low voltage water pump constantly recycles the water throughout the day, ensuring that you won’t have to keep refilling it. This is charged by an integrated solar panel, which recharges the pyramid fountain constantly. By incorporating solar power, there are no wiring or running costs incurred with this product.
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
210 I/h
Where the Slate Pyramid Fountain can be used:
Garden Decor
Patios
Balconies
Decking Areas
Rockeries
How the Slate Pyramid Fountain works:
An integrated solar panel recharges the pyramid fountain throughout the day. Simply ensure that it is placed in direct sunlight during the daytime. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Solar Pyramid Fountain is installed:
Remove from packaging and use instructions provided
Place in your desired area
Switch the on/off button underneath the solar panel
Make sure that the fountain is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
This classical Stone Finish Winchester Birdbath will make your garden stand out this summer!
Perfect for the upcoming summer months, this traditional Stone Finish Winchester Birdbath is ideal for creating a relaxed atmosphere within your garden. This bestseller in our range is known for adding a touch of elegance and style wherever you decide to place it. Not just for use as a birdbath, the gorgeous antique stone finish makes it an essential ornament for your garden. Powered by an integrated solar panel, the low voltage pump constantly and it flows water through the fountain. Due to this you won’t need to keep refilling it with water. As it incoporates renewable energy, there are no wiring or running costs incurred.
This versatile product also incorpartes Smart Solar’s ‘Solar On Demand’, featuring an integral solar pump, panel and battery system with an on/off switch, which enables the feature to be used at night or in inclement conditions. Therefore you have the option of battery power as well as solar, so you can use the birdbath exactly for the length of time you need it.
Where the Winchester Birdbath can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Winchester Birdbath works:
The solar birdbath recharges itself each day using the sun’s rays. Simply ensure that the birdbath is placed in direct sunlight. Typically, the birdbath works for 6 hours on full charge. Either choose to use the birdbath daily, or save the charge for when you wish to use it. If turned on, the LED lights will switch on automatically at dusk, and deactivate themselves at dawn. Alternative choose to use batteries to power the birdbath exactly when you need it.
How the Solar Winchester Birdbath is installed:
Assemble using instructions provided
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Also boasting 2 bright white LEDs, it doubles as a light to make your pond sparkle at night. Powered by an externally mounted solar panel, this recharges the sunjet throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 50cm. Suckers and netting are also provided, enabling you to anchor the pump in the centre of your pond.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Creates a relaxing atmosphere in your garden, patio or on your balcony
Neptune Cascade includes:
- 1 x Large ceramic bowl
- 3 x Smaller ceramic bowls
- 1 x ceramic jug
- Instructions
- Solar panel unit and wiring
- 1 x Pump
- 1 x Tubing
Details:
- Operates in direct sunlight to provide a peaceful flow of cascading water
- Powered by a separate solar panel (supplied) 3m:10ft cable to solar panel
- Low voltage water pump with filter
- No wiring, simply install and enjoy
- No operating costs
Height of Neptune Cascade: 49cm
Width of Neptune Cascade: 44cm
Solar powered decorative fairy fountain with pouring leaf detail
Made from resin with an attractive bronzing finish
Creates a relaxing atmosphere in your garden, patio or on your balcony
Operates in direct sunlight
Powered by a separate solar panel (supplied) allowing the fountain to be placed in shady areas.
Low voltage water pump with filter
3m:10ft cable to solar panel
No wiring, simply install and enjoy
No operating costs
Approximate measurements:
-Height: 42cm
-Width: 33cm
-Depth: 36cm
Decorate your garden today with this solar powered Frog Water Feature!
Brand new in our summer range, create a relaxing atmosphere anywhere in your garden with this Solar Frog Water Feature. Made with a beautiful ceramic design, it looks fantastic wherever you decide to place it. Water flows constantly through the frog’s mouth into the water bowl, and due to it being solar powered, the water recycles itself constantly. The frog feature is connected by cable to an externally mounted solar panel, which charges it throughout the day. By incorporating solar power, there are no wiring or running costs incurred with this product.
Technical Specification:
Solar Panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
210 I/h
Where the Solar Frog Fountain can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Frog Fountain works:
Powered by an exteriorly mounted solar panel, this recharges the frog fountain throughout the day and keeps it working. The lead length from the solar panel to the fountain is 3m. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Solar Frog Fountain is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the fountain is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Provide oxygenation for ponds in hot, sunny conditions with this Solar Oxygenator Air Pump!
Brand new in our range for summer, ensure that your pond is kept oxygenated with this superb Solar Oxygenator Air Pump. Especially suited for ponds that don’t have any oxygenating plants, it is suitable for most small to medium sized ponds (up to 5000 Litres). Powered by an externally mounted solar panel, it has a 3m cable from the solar panel to the pump. The two flexible tubes are 2m long each, and connect from the pump to the 2 submerged air stones.
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Oxygenator can be used:
Water Features
Small Ponds
How the Solar Oxygenator works:
Powered by an externally mounted solar panel, this recharges the Oxygenator throughout the day and keeps it working. The lead length from the solar panel to the Oxygenator is 3m. To ensure optimum power, ensure that the solar panel is placed in direct sunlight.
How the Solar Oxygenator is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
These 3 multi-dimensional solar powered underwater spot lights will bring life to your favourite garden and water features!
Boasting 3 super bright LEDs in each light, these Solar Spot Lights are ideal for drawing attention to your borders, flowerbeds and water features. Use them in a variety of ways, either by placing them underwater in ponds and water features, or just to highlight areas of your garden. Due to their high quality beams, they can also be used as a security precaution for lighting pathways and steps, preventing them from being a hazard. Each spotlight has 4 different colour inserts, offering you a range of options. Powered by an externally mounted solar panel, these clever, eco-friendly lights charge themselves during the day using sunlight. As they incorporate solar power, there is no wiring or running costs!
Where the Solar Spot Lights can be used:
Planters
Garden borders
Lighting small ponds/features
How the Solar Spot Lights work:
The external solar panel charges the rechargeable batteries during the day. There is an 8m cable from the solar panel to the first light, and a 1m cable between the lights. Ensure that the solar panel is placed in maximum sunlight during daylight hours. The typical light time is generally 6-8 hours, although this depends on the amount of charge received. An intelligent photo sensor switches the lights on automatically at dusk, and deactivates them at dawn.
How the Solar Spot Lights are installed:
Install the lights in your designated area with the instructions provided
Make sure the solar panel is mounted in an area of direct sunlight
The on/off button is located on the underside of the solar panel.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Also boasting 2 bright white LEDs, it doubles as a light to make your pond sparkle at night. Powered by an externally mounted solar panel, this recharges the sunjet throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 50cm. Suckers and netting are also provided, enabling you to anchor the pump in the centre of your pond.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Such an easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area, due to the water-well, being above the ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
This beautiful ornate birdbath and water feature make a lovely combination which we are sure will give both yourself and the garden bird’s pleasure throughout the Seasons to come.
Sitting on top of both reservoirs is a lovely little bird ready to have a drink or a refreshing splash in the trickling water. Finished with a realistic tree trunk style effect, this will also blend into to most garden settings offering as a feature and giving and enticing sound effect.
Add the finishing touch to your garden today with this cascading Solar Frog Lilypad Water Feature!
Brand new in our summer range, create a relaxing atmosphere anywhere in your garden with this beautiful water feature. Made with a eye-catching glazed ceramic lilypad design, it looks fantastic wherever you decide to place it. Water flows constantly through the frog’s mouth into the various sized lilypads, creating a gorgeous effect as it flows down. Due to this frog feature being solar powered, the water recycles itself constantly. The frog feature is connected by cable to an externally mounted solar panel, which charges it throughout the day. By incorporating solar power, there are no wiring or running costs incurred with this product.
Where the Solar Frog Lilypad Cascade can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Frog Lilypad Cascade works:
Powered by an exteriorly mounted solar panel, this recharges the frog fountain throughout the day and keeps it working. The lead length from the solar panel to the fountain is 3m. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Solar Lily Cascade is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your water features with this Solar Lily Floating Fountain!
Impress your family and friends this summer with this fantastic solar lily fountain! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an integrated solar panel, this recharges the fountain throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Product Specification:
Solar Panel:
Voltage – 6v
Power – 1.1w
Pump:
Voltage – 4-12v
Flow Rate – 210 I/h
Where the Lily Floating Fountain can be used:
Ponds
Lakes
Water Features
How the Lily Floating Fountain works:
The inbuilt solar panel recharges the floating lily using sunlight. Simply ensure that the lily is placed in direct sunlight during daylight hours. Very easy to set up and install, simply switch the lily on and place it in your desired area. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Floatable Lotus Flower is installed:
Assemble using instructions provided
Unscrew the underneath of the solar panel and flick the on/off switch
Fix solar panel back into place
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Creates a relaxing atmosphere in your garden, patio or on your balcony
Neptune Cascade includes:
- 1 x Large ceramic bowl
- 3 x Smaller ceramic bowls
- 1 x ceramic jug
- Instructions
- Solar panel unit and wiring
- 1 x Pump
- 1 x Tubing
Details:
- Operates in direct sunlight to provide a peaceful flow of cascading water
- Powered by a separate solar panel (supplied) 3m:10ft cable to solar panel
- Low voltage water pump with filter
- No wiring, simply install and enjoy
- No operating costs
Height of Neptune Cascade: 49cm
Width of Neptune Cascade: 44cm
Provide oxygenation for ponds in hot, sunny conditions with this Solar Oxygenator Air Pump!
Brand new in our range for summer, ensure that your pond is kept oxygenated with this superb Solar Oxygenator Air Pump. Especially suited for ponds that don’t have any oxygenating plants, it is suitable for most small to medium sized ponds (up to 5000 Litres). Powered by an externally mounted solar panel, it has a 3m cable from the solar panel to the pump. The two flexible tubes are 2m long each, and connect from the pump to the 2 submerged air stones.
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Oxygenator can be used:
Water Features
Small Ponds
How the Solar Oxygenator works:
Powered by an externally mounted solar panel, this recharges the Oxygenator throughout the day and keeps it working. The lead length from the solar panel to the Oxygenator is 3m. To ensure optimum power, ensure that the solar panel is placed in direct sunlight.
How the Solar Oxygenator is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Creates a relaxing atmosphere in your garden, patio or on your balcony with this Smart Solar Ceramic Granite Effect Aphrodite Cascade.
Aphrodite Cascade includes:
- 1 x Large ceramic bowl
- 3 x Smaller ceramic bowls
- 1 x ceramic jug
- Instructions
- Solar panel unit and wiring
- 1 x Pump
- 1 x Tubing
Details:
- Operates in direct sunlight to provide a peaceful flow of cascading water
- Powered by a separate solar panel (supplied) 3m:10ft cable to solar panel
- Low voltage water pump with filter
- No wiring, simply install and enjoy
- No operating costs
Height of Aphrodite Cascade: 49cm
Width of Neptune Cascade: 44cm
The Solar Ceramic Dove Water Feature is a simple and easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area. The water-well is designed to work above the ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
Enjoy hours of tranquil water sounds during your Summer Evenings, as the water gently cascades out of the mouth of the beautifully rested Dove.
This Smart Solar water feature will bring your garden to life. Providing a gorgeous trickling sound for your relaxation, this Ravenna Ceramic Birdbath water feature will bring calm to wherever you place it.
Fully self-contained water feature - no need for a constant water source
Integrated solar panel - easy to assemble, no tools required
Height 61cm
Width 40cm
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Also boasting 2 bright white LEDs, it doubles as a light to make your pond sparkle at night. Powered by an externally mounted solar panel, this recharges the sunjet throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 50cm. Suckers and netting are also provided, enabling you to anchor the pump in the centre of your pond.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Such an easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area, due to the water-well being designed to work above ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
We are sure that this water feature will bring much humour and conversation whilst watching; Mummy Duck hold the bronze effect umbrella over her little ducklings’ as they splish and splash in the falling water below.
Maintenance free as this is made from Resin, giving you more time to relax and enjoy your garden.
Such an easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area, due to the water-well, being above the ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
This timeless feature almost creates a remembrance of the industrial era, as the effect of the Boy and Girl pumping the water from a well, which then pours into the bowl below, may allow you to; relax, unwind and enjoy the summer evenings and attract wildlife to your planted areas.
Create a relaxing atmosphere in your garden with this Solar Buddha Fountain!
This Solar Buddha Fountain will make a stunning addition to any garden! Installed with 2 super bright LEDs, it doubles up as both a fountain and a decorative garden light. The low voltage water pump constantly recycles the water, making it completely maintenance free. Made from a durable resin with a bronze-effect finish, it is long lasting, and works all year round. Powered by an integrated solar panel, it clever recharges itself using the sun’s rays. By using renewable energy, there are no wiring or running costs incurred.
However this versatile product also incorpartes Smart Solar’s ‘Solar On Demand’, featuring an integral solar pump, panel and battery system with an on/off switch, which enables the feature to be used at night or in inclement conditions. Therefore you have the option of battery power aswell as solar, so you can use the Buddha exactly for the length of time you need it.
Product Specification:
Solar Panel:
Voltage – 6v
Power – 1.1w
Pump:
Voltage – 4-12v
Flow Rate – 210 I/h
Battery:
Voltage – 4.8v
Capacity - 100 mAh
Size – Battery Pack
Where the Solar Buddha Fountain can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Buddha Fountain works:
The solar Buddha fountain recharges itself each day using the sun’s rays. Simply ensure that the Buddha is placed in direct sunlight. Typically, the fountain works for 6 hours on full charge. Either choose to use the Buddha daily, or save the charge for when you wish to use it. If turned on, the LED lights will switch on automatically at dusk, and deactivate themselves at dawn. Alternatively choose to use batteries to power the Buddha exactly when you need it.
How the Solar Buddha Fountain is installed:
Assemble using instructions provided
Simply switch on/off on the underside of the solar panel
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
The Sunjet 500 is for use in larger ponds to provide water oxygenation and circulation. Can also be used to create your own water feature in a water container of your choice.
Sunjet 500
- A solar panel
- A 10 foot (3 metre) cable
- 1 pump
- 3 different fountain heads
- Sunjet 500 float
- Instructions
- Netting
- Solar panel stake
- Solar panel mount
- Mount screws
- Fountain tubing
Details
- The pump is fitted with suckers for pond bed mounting
- The pump can be used with the Sunjet 500 float in deeper water to float on the surface
- The cable is flexible and is fitted from the solar panel to the pump
- It operates in direct sunlight
- The solar panel is remote and can be staked or mounted in direct sunlight to provide power in ponds that may receive shade
- A water filter is included in the pump
- Maximum fountain height is up to 40 inches (100cm) with the jet fountain head
- There are 3 different fountain heads to provide alternate water fountain effects
- The netting can be weighted with stones and anchored to keep the Sunjet 500 float in the centre of the pond
Width of Sunjet 500 float: 18.5cm
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an externally mounted solar panel, this fountain will work consistently when the sun is shining. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
This elegant Solar Pitcher Cascade Water Feature will bring a stylish look to your garden!
Perfect for the upcoming summer months, this traditional Solar Pitcher Cascade is ideal for creating a relaxed atmosphere within your garden. The classy dark red terracotta effect finish will make this product stand out, wherever you decide to use it. Water cascades down the pitcher, before constantly recycling itself, ensuring you don’t need to refill it. Powered by an integrated solar panel, the low voltage pump enables this to happen, creating a lovely, relaxing effect. As it incoporates renewable energy, there are no wiring or running costs incurred.
However this versatile product also incorpartes Smart Solar’s ‘Solar On Demand’, featuring an integral solar pump, panel and battery system with an on/off switch, which enables the feature to be used at night or in inclement conditions. Therefore you have the option of battery power aswell as solar, so you can use the water cascade exactly for the length of time you need it.
Where the Solar Pitcher Cascade can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Pitcher Cascade works:
The solar pitcher cascade recharges itself each day using the sun’s rays. Simply ensure that the pitcher is placed in direct sunlight. Typically, the pitcher works for 6 hours on full charge. Either choose to use the pitcher daily, or save the charge for when you wish to use it. If turned on, the LED lights will switch on automatically at dusk, and deactivate themselves at dawn. Alternative choose to use batteries to power the pitcher exactly when you need it.
How the Solar Pitcher Cascade is installed:
Assemble using instructions provided
Simply switch on/off on the underside of the solar panel
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
This classical Stone Finish Winchester Birdbath will make your garden stand out this summer!
Perfect for the upcoming summer months, this traditional Stone Finish Winchester Birdbath is ideal for creating a relaxed atmosphere within your garden. This bestseller in our range is known for adding a touch of elegance and style wherever you decide to place it. Not just for use as a birdbath, the gorgeous antique stone finish makes it an essential ornament for your garden. Powered by an integrated solar panel, the low voltage pump constantly and it flows water through the fountain. Due to this you won’t need to keep refilling it with water. As it incoporates renewable energy, there are no wiring or running costs incurred.
This versatile product also incorpartes Smart Solar’s ‘Solar On Demand’, featuring an integral solar pump, panel and battery system with an on/off switch, which enables the feature to be used at night or in inclement conditions. Therefore you have the option of battery power as well as solar, so you can use the birdbath exactly for the length of time you need it.
Where the Winchester Birdbath can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Winchester Birdbath works:
The solar birdbath recharges itself each day using the sun’s rays. Simply ensure that the birdbath is placed in direct sunlight. Typically, the birdbath works for 6 hours on full charge. Either choose to use the birdbath daily, or save the charge for when you wish to use it. If turned on, the LED lights will switch on automatically at dusk, and deactivate themselves at dawn. Alternative choose to use batteries to power the birdbath exactly when you need it.
How the Solar Winchester Birdbath is installed:
Assemble using instructions provided
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your water features with this Solar Lily Floating Fountain!
Impress your family and friends this summer with this fantastic solar lily fountain! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an integrated solar panel, this recharges the fountain throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Product Specification:
Solar Panel:
Voltage – 6v
Power – 1.1w
Pump:
Voltage – 4-12v
Flow Rate – 210 I/h
Where the Lily Floating Fountain can be used:
Ponds
Lakes
Water Features
How the Lily Floating Fountain works:
The inbuilt solar panel recharges the floating lily using sunlight. Simply ensure that the lily is placed in direct sunlight during daylight hours. Very easy to set up and install, simply switch the lily on and place it in your desired area. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Floatable Lotus Flower is installed:
Assemble using instructions provided
Unscrew the underneath of the solar panel and flick the on/off switch
Fix solar panel back into place
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Such an easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area, due to the water-well, being above the ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
Enjoy hours of tranquil water sounds during your Summer Evenings, as the water gently cascades out of the mouth of the cheeky frog, allowing the water to plunge down into the two further separate Lilly Leafs below.
Such an easy way to create a relaxing atmosphere and to attract wildlife into your garden or patio area, due to the water-well being designed to work above ground, so no digging and lining needed. Simply place in an area which receives the optimum amount of sunlight to power up the pump.
Relax, unwind and enjoy hours of tranquil water sounds during your Summer Evenings, as the water gently tipples from the delicately held flower by this beautiful fairy.
Decorate your garden today with this solar powered Frog Water Feature!
Brand new in our summer range, create a relaxing atmosphere anywhere in your garden with this Solar Frog Water Feature. Made with a beautiful ceramic design, it looks fantastic wherever you decide to place it. Water flows constantly through the frog’s mouth into the water bowl, and due to it being solar powered, the water recycles itself constantly. The frog feature is connected by cable to an externally mounted solar panel, which charges it throughout the day. By incorporating solar power, there are no wiring or running costs incurred with this product.
Technical Specification:
Solar Panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
210 I/h
Where the Solar Frog Fountain can be used:
Water Features
Garden Decor
Patios
Balconies
Decking Areas
How the Solar Frog Fountain works:
Powered by an exteriorly mounted solar panel, this recharges the frog fountain throughout the day and keeps it working. The lead length from the solar panel to the fountain is 3m. Once you have filled the fountain with water once you shouldn’t need to do it again. The low voltage water pump constantly recycles the water throughout the day.
How the Solar Frog Fountain is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the fountain is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your water features with this Solar Lily Floating Fountain!
Impress your family and friends this summer with this fantastic solar lily fountain! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an integrated solar panel, this recharges the fountain throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Product Specification:
Solar Panel:
Voltage – 6v
Power – 1.1w
Pump:
Voltage – 4-12v
Flow Rate – 210 I/h
Where the Lily Floating Fountain can be used:
Ponds
Lakes
Water Features
How the Lily Floating Fountain works:
The inbuilt solar panel recharges the floating lily using sunlight. Simply ensure that the lily is placed in direct sunlight during daylight hours. Very easy to set up and install, simply switch the lily on and place it in your desired area. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Floatable Lotus Flower is installed:
Assemble using instructions provided
Unscrew the underneath of the solar panel and flick the on/off switch
Fix solar panel back into place
Place in your desired area
Make sure it is placed in direct sunlight during daylight hours
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an externally mounted solar panel, this recharges the sunjet throughout the day, and ensures that it is constantly working. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel:
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.
Bring a fresh and unique touch to your pond or other water features with this Solar Powered Water Pump!
Impress your family and friends this summer with this fantastic Sunjet Solar Powered Water Pump! Ideally for use in small ponds, it adds a decorative, sparkling look to make your water features stand out. Choose between a variety of settings, such as anchored or free floating, and pick between 3 different fountain heads for your preferred style. Powered by an externally mounted solar panel, this fountain will work consistently when the sun is shining. By using solar power, there are no energy and running costs involved. Simply install, sit back and enjoy!
Technical Specification:
Solar panel
Voltage - 6v
Power- 0.8w
Pump:
Voltage – 4-12v
180 I/h Flow Rate
Where the Solar Sunjet can be used:
Water Features
Ponds
Lakes
How the Solar Sunjet works:
Powered by an externally mounted solar panel, this recharges the Sun jet throughout the day and keeps it working. The lead length from the solar panel to the Sun jet is 3m. Depending on the style you wish, choose between 3 different fountain heads, and between anchored or free floating. Please note that it has a minimum water depth of 15cm, and the maximum height of the fountain is 45cm.
How the Solar Sunjet is installed:
Remove from packaging and use instructions provided
Place in your desired area
Make sure that the solar panel is placed in direct sunlight during the day.
Note: Although most solar products come pre-charged, this isn’t always the case. If batteries don’t appear to be charged, then switch on and allow a couple of days to charge.