The Thomson X2 Road stem means that you can realise the benefits of stiffer forks & stiffer 31.8mm bars. X2 offers precise steering, tracking & more control while riding & is all wrapped up in a beautiful design. It features a lighter, 2-bolt handlebar clamp & the interlocking handlebar clamp makes it as torsionally strong as other 4-bolt designs while being lighter & narrower. The X2 also has a low 36mm stack height & is available in 2 rise options; 10 & 17 degree. Both the 10 & 17-degree stem can be run with a positive or negative rise & the reversible graphics look great in either direction. 10 degree stems work well for average riders/amateur racers while those who want a very aggressive aero position or who want a very upright position can use the 17-degree stem to meet their fit needs. ...

Thomson Elite X4 Oversized Mtb Stem: The Thomson Elite X4 Stem grew out of the legacy of the Thomson Elite line. A great all around modern stem to fit 31.8mm diameter handlebars. This stem is ready to ride where you are. The design team for the new Thomson X4 had a tough goal: make a stem better than the Thomson Elite 25.4. Early tests showed us that our competitors 31.8 stems were heavier & weaker than our Thomson Elite 25.4. At Thomson the X4 was not done until it was stronger, lighter & longer lived than the legendary Thomson Elite. The Thomson X4 stem means that you can realize the benefits of stiffer forks & stiffer 31.8 bars. X4 offers precise steering, tracking, & more control while riding, all wrapped up in a beautiful design. The Thomson X4 is stronger & 30 grams lighter than the Thomson Elite 25.4 mountain stem. It features a traditional steerer clamp that is shaped to save weight & to be knee friendly. X4 is absolutely the best combination of strength & weight available. Thomson stems are the strongest in the industry, meaning freeride & downhill riders can run Thomson confidently. Certified to: EN 14766 2006 MTB & DIN CERTCO: 2006 MTB Solid one piece 7000 series aluminum extruded billet precision machined by Thomson in our Macon, Georgia factory Built & tested to the same standards as our aerospace parts The best stem for all-around Mountain Bike & Cyclocross riding ...

The design team for the new Thomson X4 had a tough goal: make a stem better than the Thomson Elite 25.4. Early tests showed that competitors’ 31.8 stems were heavier & weaker than Thomson's Elite 25.4. At Thomson the X4 was not deemed complete until it was stronger, lighter & longer lived than the legendary Thomson Elite. The Thomson X4 stem means that you can realize the benefits of stiffer forks & stiffer 31.8 bars. X4 offers precise steering, tracking, & more control while riding, all wrapped up in a beautiful design. The Thomson X4 is stronger & 30 grams lighter than the Thomson Elite 25.4 mountain stem. It also features a traditional steerer clamp that is shaped to save weight & to be knee friendly. X4 is absolutely the best combination of strength & weight available. Thomson stems are the strongest in the industry, meaning freeride & downhill riders can run Thomson confidently. ...

Thomson HB-E113 Titanium MTB Handlebar: Strength & beauty count for something as well. This bar will look good & ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparalleled ride. 780mm x 15mm rise x 8&176; backsweep-5&176;upsweep x 31.8mm 345 g ...

Thomson HB-E114 Alloy Trail Handlebar: Identical in alloy & construction to Thomsons Downhill bar, the new Trail bar is 750mm wide with 12mm of rise, 6&176; of backsweep & 4&176; of upsweep. The Trail bar gives you a light aluminum all-around bar for your Mountain Bike. The clamping area is 50mm allowing a different bend profile for a more compliant ride. Thomson bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent & bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness & close tolerances, especially in tapered sections. This keeps weight low & fatigue life high. Built using 7050 Aluminum alloy for strength & long life 750mm wide 12mm rise, 6&176; backsweep 4&176; upsweep 50mm clamping area ...

Designed specifically for Cyclocross riding, Thomson present the KFC-One, which is Katie Compton’s signature cross bar. Katie brings her multiple National Championships & European racing experience to bring you a bar that’s built her way & designed to help you own the course. Shaped for maximum comfort & control, the KFC-One bars feature twin flat sections on the bottom of the bar, meaning that after the outer cables are wrapped over with bar tape, a completely round bar is created. Also, as the top section is wide an round, additional auxiliary brake levers can be fitted, whilst still leaving plenty of hand room. ...

Thomson Masterpiece Inline Seat Post: Probably the lightest, strongest alloy seatpost in the world. Thomson is an engineering company first & foremost. They dont make hundreds of widgets & aluminium thingamys
- they concentrate on stems & seatposts & do them very well. But they are also passionate about cycling & much of their R&D is done on the trail, so they know what is required to make a strong component that will stand the test of time. These American designed & manufactured bike parts dont just look good they are good &, as many bike magazines & manufacturers have realised, Thomson is second to none. Use: Road/ Cyclocross Every component of the Thomson seatpost is American made Hand finished to exacting tolerances to produce the ultimate seatpost Extremely light weight from 156g Infinite tilt adjustment -/+ 17° Tube & head are machined from one single piece of 7000 series aluminium billet Available in silver or black Also available in 10° setback
...

Thomson is an engineering company first & foremost. They dont make hundreds of widgets & aluminium thingamys
- they concentrate
...

Thomson Masterpiece Setback Seat Post: Probably the lightest, strongest alloy seatpost in the world. Thomson is an engineering company first & foremost. They dont make hundreds of widgets & aluminium thingamys
- they concentrate on stems & seatposts & do them very well. But they are also passionate about cycling & much of their R&D is done on the trail, so they know what is required to make a strong component that will stand the test of time. These American designed & manufactured bike parts dont just look good they are good &, as many bike magazines & manufacturers have realised, Thomson is second to none. Use: Road/ Cyclocross Every component of the Thomson seatpost is American made Hand finished to exacting tolerances to produce the ultimate seatpost Extremely light weight from 156g Infinite tilt adjustment -/+ 17° Tube & head are machined from one single piece of 7000 series aluminium billet Available in silver or black
...

Thomson is an engineering company first & foremost. They dont make hundreds of widgets & aluminium thingamys
- they concentrate
...