Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur. ...

The SXg is a low profile chainguide, which is unlikely to come into contact with objects that you ride over. ...

Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur. ...

The SXg is a low profile chainguide, which is unlikely to come into contact with objects that you ride over. ...

This hardware acts as a direct replacement should you happen to damage or lose any that came supplied with the guide. in addition, these are genuine MRP replacement parts. ...

The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, & grit to escape. The Wave design creates more open areas for mud & debris evacuation & preserves chain retention in adverse conditions - one of many “ Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling & retention characteristics while providing market-leading durability.
- Tooth faces displaced from nominal centreline to provide active & positive lateral engagement of every chain link with a chainring tooth.
- Alternating lateral force to each chain link to actively retain links to the ring.
- Less surface contact between chainring & chain creating minimal friction & maximum retention.
- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.
- Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRW430 Black 30T 9/10/11 Speed CRMRW432 Black 32T 9/10/11 Speed CRMRW434 Black 34T 9/10/11 Speed CRMRW436 Black 36T 9/10/11 Speed CRMRW438 Black 38T 9/10/11 Speed CRMRW138 Black 38T 9/10/11 Speed CRMRW140 Black 40T 9/10/11 Speed CRMRW142 Black 42T 9/10/11 Speed




...

The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, & grit to escape. The Wave design creates more open areas for mud & debris evacuation & preserves chain retention in adverse conditions - one of many “ Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling & retention characteristics while providing market-leading durability.
- 50mm (standard).
- Tooth faces displaced from nominal centreline to provide active & positive lateral engagement of every chain link with a chainring tooth.
- Alternating lateral force to each chain link to actively retain links to the ring.
- Less surface contact between chainring & chain creating minimal friction & maximum retention.
- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.
- Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWR28 Black 28T 9/10/11 Speed CRMRWR30 Black 30T 9/10/11 Speed CRMRWR32 Black 32T 9/10/11 Speed CRMRWR34 Black 34T 9/10/11 Speed CRMRWR36 Black 36T 9/10/11 Speed





...

The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, & grit to escape. The Wave design creates more open areas for mud & debris evacuation & preserves chain retention in adverse conditions - one of many “ Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling & retention characteristics while providing market-leading durability. Technological features & benefits include the following:
- 49mm (standard) chainline
- Tooth faces displaced from nominal centerline to provide active & positive lateral engagement of every chain link with a chainring tooth.
- Alternating lateral force to each chain link to actively retain links to the ring.
- Less surface contact between chainring & chain creating minimal friction & maximum retention.
- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.
- Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWG28 Black 28T 9/10/11 Speed CRMRWG30 Black 30T 9/10/11 Speed CRMRWG32 Black 32T 9/10/11 Speed CRMRWG34 Black 34T 9/10/11 Speed CRMRWG36 Black 36T 9/10/11 Speed





...

Made from a light yet tough CNC machined aluminium, the MRP Wave CX 5 Arm Chainring is the ideal choice for adapting your factory-fitted chainset to suit a 1x 1x 8, 9, 10, 11 or 12-speed drivetrain. ...

Made from a light yet tough CNC machined aluminium, the MRP Wave CX 5 Arm Chainring is the ideal choice for adapting your factory-fitted chainset to suit a 1x 1x 8, 9, 10, 11 or 12-speed drivetrain. ...