Engineered with Exo-Core technology, which combines two materials for maximum performance Compressed Micro-Gasket provides a leak resistant seal & a low profile design Semi-rigid exoskeleton maximizes the structural strength & stability of the goggle “ The XCEED goggles are the best goggles that I have ever worn – they are super comfortable & the vision is insane. The ability to see so clearly with incredible peripheral vision allows me to see the wall & other swimmers underwater unlike ever before.” – Michael Phelps "I can see 2 or 3 lanes over. I've never worn another goggle like it."
- Michael Phelps “ With these goggles, we took it to the next level. Elite performers will want to wear it, particularly due to the curvature & the range of vision. You’re getting almost 180-degree vision, which is really important when you’re racing. You want to have that peripheral sight. & the clarity of it
- because of the patented curved lens design--is better than anything I’ve ever seen.”
- Coach Bob Bowman


...

Exo Core Unique materials combined to create maximum performance Exo Foil Compression with enhanced range of motion & flexibility Aqua Core High-level compression Increased circulation PUTTING THE SUIT ON For best results, start with a dry suit & make sure that you are not wearing any lotions or oils on your skin. Take your time when putting the suit on, as it will be very tight. Turn over the silicone grippers on the legs so they do not stick as you pull the suit up. Once the suit is on & in the correct position, turn them back down to keep the suit in place & to avoid water entering the suit. Licking your fingertips will help you be able to grab small areas of fabric away from the body in order to inch it up. Gloves can also be helpful. If you have long nails, take care to avoid poking them through the fabric. Avoid grabbing large areas of fabric to forcefully pull the suit up, as this could cause you to tear it. This suit must be put on by carefully by slowly moving it up your body. As the hips are the widest part of the body, this is where fitting will be the hardest. When putting on a women’s suit, it can be helpful to place the elbows through the arm holes before the hand due to the tight fitting nature of the fabric. To tighten the waist band on the men’s suit, pull the straps across the body rather than away from it so as not to tear the seam. It is recommended to carefully stretch your body once the suit is on to ensure that it is in the correct position ENSURING A PRECISE FIT The suit should fit close to the body & have no air pockets or wrinkles showing. If you can grab large pieces of fabric in your fingers then you will likely need to choose a smaller size. The XPRESSO should be comfortable when bending or streamlining. If it is not or causes chafing, then you may need a larger size. On the women’s suit, be sure that the top seam sits on the highest point of the shoulder for optimal neckline positioning. ...

MRP 1x BB Fitting Upper Guide Chain Device: Developed with World Cup powerhouse Adam Craig, the 1.x is purpose-built for cross country riding with a 1x 9 drive train. If you are running 1x 9 & dont need a bash guard, this is the ticket. No more homemade contraptions needed! 32-36T: 58 grams 32-40T: 62 grams Black or White Upper Guide Chainline adjustment BB-Mount only

Includes:: spacers for fine chainline adjustability Looks & works great with a new MRP chainring!

...

With the MRP 1x CS Chain Guide installed onto your ride, you'll be able to attack the toughest trails as hard as you dare. Easy to install without removing your crankset, it's made from a tough composite & works on up to 34 tooth chainrings. ...

The 1x CS from MRP is the result of 20+ years of chainguide experience with the help of design cues from the V3 series. This model boasts a stiff & light glass-filled composite backplate alongside a durable nylon upper guide to add major security to your 1x 10, 11 or 12-Speed drivetrain for outstanding quality & performance. ...

Ready for long days on your favourite local mountain bike trails, this E-MTB upper chain guide features a tough polycarbonate construction for maximum strength on the more demanding of terrain conditions. Specifically tailored for electric mountain bike riding, this model is equipped with a Shimano E8000/E7000 compatible mount for easy integration with your drivetrain set-up. The 1x guide is the definitive E-MTB chain guide. Used on the cross-country (XC) World Cup circuit & even in the Olympics, the 1x has a proven track record of dependability & performance. This version is specially developed for the rigours of electric mountain bike riding. MRP has been securing & protecting the drivetrains of winners for over twenty years. Depending on your needs, MRP have a guide perfect for you. Whether you're looking to extend the life of your drivetrain by preventing drops from chainring wear, hucking into rock gardens for the fun of it, or looking for precious seconds by taking any line on the racecourse, these guides will enhance your ride. Manufacturer's Part Number: CHMRUVESK Black 34/38T ...

MRP 1x Upper Guide Seattube Fitting: Developed with World Cup powerhouse Adam Craig, the 1x (pronounced one-bye) is purpose-built for cross country riding with a 1x 9 drive train. If you are running 1x 9 & dont need a bash guard, this is the ticket. No more homemade contraptions needed! Fits seat tube sizes 28.6, 31.8 & 34.9mm (with supplied rubber shims). MTB chainline = 49-51mm for middle chainring position on MTB Triple crank. MRP also gave the MTB version significantly more vertical adjustment, due to the small chainrings that will be used (32t is common) & the large quantity of carbon bikes with flared seat tubes at the BB junction. Weight: 32-40T: MTB 74g Colours: Black or White Chainline adjustment Seat Tube Mount
- Fits seat tube sizes 28.6, 31.8 & 34.9mm with supplied rubber shims

Includes:: spacers for fine chainline adjustability Looks & works great with a new MRP chainring


...

This V3 guide is available for most modern mounting options which

Includes:: D-Mount, E-Mount, ISCG-05,

...

This superb 1x guide is an ideal addition to your drivetrain if you need extra chain retention. in addition, it's specifically ...

MRP 2x Chain Device Including Integral Bashguard: The new 2x guide for 2-chainring MTB cranks. In development for almost two years, the 2x utilizes MRPs patented integrated skid chainring protection & introduces a new patent-pending dual pulley tensioning system. The 2x is designed to work seamlessly with the new wave of 2x 10 drivetrains being specified on many new mountain bikes. These new drivetrains created new challenges to chain management with their unique gear ratios, chain lines, & impact protection requirements. The 2x solves all of these challenges. To create the 2x guide, MRP began the process of applying our range of technologies & systems to find the optimal solution for 2x 10 drivetrains, & through collaboration with SRAM & extensive testing it was decided that the ultimate light weight solution was a chain guide sharing elements of the G2sl, LRP, & XCG products. Notable is the absence of an outer capture ring on the cranksets, relying on the front derailleur & lower pulley assembly for complete chain retention. MRPs design goals are driven by the passion to design & produce products that allow riders to just ride
- not worrying about chain damage or dropping a chain. The integrated skid protects the chainrings from impacts without the added weight of a full bash ring. The dual pulley tensioning system ensures that the chain is properly tensioned & in the right position, keeping it on the chainring in the roughest conditions. The dual pulleys also reduce drag & noise compared to other designs, ensuring a better riding experience. Finally, the raised top fin profile prevents the chain from dropping to the BB shell. Compatibility: 39/42 For 2x 10 Cranksets (XTR M980/M985, SRAM XX, XO, X9 etc) 36/38 Sram AM Cranksets (22t/36t & 24t/38t ratios) & Triple Cranksets up to 38T MRPs patented skid (US Patent 7, 066, 856), removable for those who prioritize weight savings over protection (43g savings) Patent-pending dual pulley design provides precise chain engagement while reducing noise & drag Raised top fin profile prevents the chain from dropping to the BB shell ISCG, ISCG-05, & BB mounting options Compatible with 9 & 10 speed drivetrains Colours: Available in black or white Weight: -36-38T w/ skid
- 130g (ISCG-05 model) -39-42T w/ skid
- 144g (ISCG-05 model)


...