Shimano XTR M980 10 Speed Hollowtech II Triple Chainset: The veritable heart of the new XTR Trail drivetrain is a trail-tuned triple-ring chainset (FC-M980). Dyna-Sys combines features like quick-shifting Close Step front gear ratios (think: bigger granny, smaller big ring), a wide-range 11- to 36-tooth 10-speed cassette & re-engineered shifters & derailleurs that are less susceptible to trail chatter or contamination. Together, Shimano Systems Engineering unlocks performance & versatility never before seen in a triple, & its all tied together with the industrys first mountain-bike-specific 10-speed chain. Riders who would otherwise have to pull the ripcord & battle technical climbs from the trenches of their granny gear range can now push further up the trail in their middle ring thanks to the increased range of a 36-tooth low-end rear gear. The granny gear is still there, youll just need it less, & the 42-tooth big ring is more useable & easier to get into than ever before, so youll use it more. Simply put, XTR Trail is the most efficient mountain bike drivetrain singletrack has ever seen HG-X chainring with patented spike pins give smooth & fast gear shifts under load Average weight: 770g (175mm including BB) Model Number: FC-M980 Series: XTR Crank Construction: Hollowtech II Cassette Compatibility: 10-speed Chain Compatibility: HG-X 10-speed Chainring

Sizes: 42-32-24T Crank Arm Length: 165/170/175/180mm Close Step trail-tuned gearing: 42-32-24T Dual Spike chainring technology 10-speed specific Standard 104/64 bolt pattern Durable Ti/ Carbon composite 32-tooth Primary Driving Gear

...

Dyna-Sys combines features like quick-shifting Close Step front gear ratios (think: bigger granny, smaller big ring), a wide-range 11- to 36-tooth 10-speed cassette & re-engineered shifters & derailleurs that are less susceptible to trail chatter or contamination. Together, Shimano Systems Engineering unlocks performance & versatility never before seen in a triple, & its all tied together with the industrys first mountain-bike-specific 10-speed chain. Riders who would otherwise have to pull the ripcord & battle technical climbs from the trenches of their granny gear range can now push further up the trail in their middle ring thanks to the increased range of a 36-tooth low-end rear gear. The granny gear is still there, youll just need it less, & the 42-tooth big ring is more useable & easier to get into than ever before, so youll use it more. Simply put, XTR Trail is the most efficient mountain bike drivetrain singletrack has ever seen ...

Shimano XTR M980 10 Speed Rapidfire Pods: Shimano sets the benchmark with the next generation of mountain bike shifting, Dyna-Sys 10-speed XTR Rapidfires with Vivid indexing are there slickest shifters yet. Light to the touch but positive & crisp, Vivid indexing provides a constant amount of shift lever force across all 10 sprockets. Instant Release for super fast shifts, delivering the chain to the next gear the moment the lever is actuated with no hesitation. The Multi Release allows multiple gear changes from both levers with one sweep, further adding to the speed of shift. 2-Way release allows the upper shift lever to performs the same Multi Shift function but swings in either direction allowing it to be released by the thumb or index finger. Horizontally adjustable forged alloy clamp bracket allows the shifter to be mounted in or outboard of the brake lever. The shifter also features a precision indexing drum with four sets of ball bearings providing low-friction smooth shifting. One piece anodised alloy release levers increase durability Mode converter for double / triple use Composite barrel adjuster Pod design can be converted to ISpec to integrate with the XTR brake levers For use with Dyna-Sys 10-speed only Weight 207 grams a pair ...

Light to the touch but positive & crisp, Vivid indexing provides a constant amount of shift lever force across all 10 sprockets. Instant Release for super fast shifts, delivering the chain to the next gear the moment the lever is actuated with no hesitation. The Multi Release allows multiple gear changes from both levers with one sweep, further adding to the speed of shift. 2-Way release allows the upper shift lever to performs the same Multi Shift function but swings in either direction allowing it to be released by the thumb or index finger. Horizontally adjustable forged alloy clamp bracket allows the shifter to be mounted in or outboard of the brake lever. The shifter also features a precision indexing drum with four sets of ball bearings providing low-friction smooth shifting. ...

Shimano XTR M980 10 Speed Rear Derailleur: The new 10-speed XTR rear derailleur sees a re-engineered architecture that provides a smooth, linear feel at the shifter & is remarkably stable despite suspension movement, trail chatter or inevitable cable contamination. Precision engineered XTR Shadow Dyna-Sys 10-speed rear derailleur for the ultimate in shifting performance & durability. A single tension spring prevents contact with the chainstay resulting in a silent ride & direct cable routing prevents snagging from any trail side hazards. Full carbon fibre outer pulley cage saves weight while alloy inner cage increases rigidity. The cold forged alloy links & pivot bodys with carbon composite P-body leads to lower weight without compromising strength & durability. Four fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trails. High rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shift. enhanced cable pull ratio provides a more accurate shift action making the system less prone to contamination & trail chatter Dyna-Sys 10-speed compatible only Durable sealed bearing pulleys for low friction Top normal spring uses the spring to select higher gears Weight: 175 grams Model Number: RD-M980 Series: XTR Shifting Action: Top-Normal Mount Type: Direct Attachment Maximum Sprocket: 32-36T Minimum Sprocket: 11T Front Difference: 18T Total Capacity: SGS-41T GS-35T 3/2x 10 speed Advanced Light Action Carbon outer plate Shimano Shadow RD ...

This XTR shifter feature Instant Release for super fast shifts, delivering the chain to the next gear the moment the lever is actuated with no hesitation also the Multi Release function allows multiple gear changes from both levers with one sweep, further adding to the speed of shift. The 2-Way release allows the upper shift lever to performs the same Multi Shift function but swings in either direction allowing it to be released by the thumb or index finger ...

Shimano XTR M980 10 Speed Triple Front Derailleur: The latest Dyna-Sys 10-speed shifting technology is employed in the XTR M980 front derailleur to ensure precise & reliable chain movement
- the elite riders choice! XTR front pivot link is wide with hollow pins for an increase in rigidity & giving a faster, more responsive shift. The easy to reach stop screws & the retention band bolt are ideal for suspension frames designs where access is restricting. The pinch bolt is both hex key & spanner compatible for accessibility on all frame designs. The light alloy cage reduces weight & improves performance, nickel-plated finish prevents chain wear. E-Type Dual Pull design

Features: Developed specifically for triple chainsets using a bottom bracket mounting system Special design allows derailleur to be used with top or bottom pull cable routing Top swing design Dyna-Sys 10-speed design
- for use with Dyna-Sys 10-speed drivetrains Average weight: 142 grams Top Swing/ Dual Pull design

Features: Developed specifically for triple chainsets using a multi clamp band to be compatible with all 3 seat tube diameter options Special design allows derailleur to be used with top or bottom pull cable routing Top swing design Average weight: 125 grams





...

XTR front pivot link is wide with hollow pins for an increase in rigidity & giving a faster, more responsive shift. The easy to reach stop screws & the retention band bolt are ideal for suspension frames designs where access is restricting. The pinch bolt is both hex key & spanner compatible for accessibility on all frame designs. The light alloy cage reduces weight & improves performance, nickel-plated finish prevents chain wear. ...

Shimano XTR M980 Hollow Tech II Bottom Bracket Cups: Genuine Shimano Hollow Tech II bottom bracket assembly set for Shimanos XTR M980/M985 chainsets

Includes:: left & right hand cups, spacers, inner cover, & inner O-rings. Light weight seal structure helps to remove vital grams Sealed cups keep out dirt & water Maintenance free Compatible with 68 mm & 73 mm shell Durable black anodised finish Easy installation Fits M980 & M985 chainsets

...

Genuine Shimano Hollow Tech II bottom bracket assembly set for Shimano's XTR M980/M985 chainsets

Includes::

...