A 1 x CREE XB-D LED provides an output of 170 lumens. This is matched with an elliptical beam of 16&176; vertical & 24° horizontal, allowing you to be seen, from multiple angles, by other road users, at over 1000m. The lithium ion battery is rechargeable from a waterproof USB (Universal Serial Bus) port on the rear of the light & with a 4hr full charge, maintains consistent brightness throughout the specified run-time. Up to 1.4 hours in High Beam, 2.7 hours in Medium Beam, 5.9 hours in Low Beam & 11.7 hours in Flashing mode. A long button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). There is a low battery indicator & a storage mode. Activated when the light will not be used for a period of time to optimise battery longevity. Made with a UV-resistant, industrial-grade, silicone rubber body & straps, polycarbonate housing, PMMA lens, anodised aluminium heat sink, anodised aluminium fascia & solid stainless steel MIM latch. The Blinder Arc 1.7 has been tested rigerously; Drop tests, corrosion tests, UV tests, Electrical shock & static, vibration & impact, temperature & humidity, cycle testing & CE certification. ...

The Blinder Arc’s light is the latest high-intensity Lumiled LEDs which has 220 output & an elliptical beam that will give you coverage 16-degrees vertically & 24-degrees horizontally helping you to stay visible to motorists at over 1000m. This is a light not just for commuting during early morning & twilight but instead gives you total freedom day or darkest night. Has a 100% waterproof design & incorporates a Polycarbonate housing & PMMA lens for ultimate durability. Can be recharged via a USB (Universal Serial Bus) cable so that you can keep charged on the go. ...

An XM-L2 Cree LED provides an output of 550 lumens. This is matched with an elliptical beam of 16&176; vertical & 24° horizontal, allowing you to be seen, from multiple angles, by other road users, at over 1000m. The lithium ion battery is rechargeable from a waterproof USB (Universal Serial Bus) port on the rear of the light & with a 7hr full charge, maintains consistent brightness throughout the specified run-time. Up to 1.8 hours in High Beam, 3.5 hours in Medium Beam, 7.9 hours in Low Beam & 17 hours in Flashing mode. A long button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). There is a low battery indicator & a storage mode. Activated when the light will not be used for a period of time to optimise battery longevity. Made with a UV-resistant, industrial-grade, silicone rubber body & straps, polycarbonate housing, PMMA lens, anodised aluminium heat sink, anodised aluminium fascia & solid stainless steel MIM latch. The Blinder Arc 5.5 has been tested rigerously; Drop tests, corrosion tests, UV tests, Electrical shock & static, vibration & impact, temperature & humidity, cycle testing & CE certification. ...

Knog’s Blinder Arc light comes with four different light modes with both solid & flashing modes with 640 lumens of light output. The light comes with an integrated mounting strap that attaches to most handlebars & helmets. For charging the light comes with an integrated USB (Universal Serial Bus) stick that directly plugs into any standard USB (Universal Serial Bus) port for quick & easy recharging on the go. The light’s housing is extremely rugged & is 100% waterproof with intelligent thermal management. ...

Knog Blinder Front Light 4 LED Square: The Knog Blinder 4 has four super bright LEDs that pump out up to 80 Lumens of front light & 44-Lumens of rear light. Its optimized optics focus & directs a smooth beam pattern that makes the Blinder visible over 800 metres. LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride. Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements, the plug is also waterproof & will not be damaged by exposure. Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). Bike Attachment: Tool-less attachment for handlebars/rear-posts & frames of 22-32mm &248; Testing: The Blinder 4 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock & static, vibration & impact, temperature & humidity, cycle testing & CE certification. DIMENSIONS: 42 x 42 x 62mm WEIGHT: 39g

Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Polycarbonate Lens, Hard-anodised aluminium fascia & Solid stainless steel MIM latch. USB: Rechargeable Lithium Polymer battery. FRONT: 80 Lumens (LED Rating) Visibility: Light is visible at over 800 metres 100% Waterproof: The Blinder 4 is IP66 Tested & 100%waterproof against all elements Light Modes: 5 light modes: 1. Steady, 2. Fast Flash, 3. Organic Flash Slow, 4. Organic Flash Fast, 5. Eco-flash. Burn Time: Blinder 4 front lasts upto 3 hours in steady mode, 4
- 5 hours in modes 2, 3 & 4, & up to 50 hours in mode 5. Battery: Rechargeable Lithium polymer battery via integrated USB (Universal Serial Bus) plug.


...

The Dot's surface mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over (800m) away. Dot, vain as she is, has a faceplate for added style. With a weight of only 18 grams the light uses its tool-less attachment to securely connect to handlebars & frames of 22–32+mm. Designed to fit both standard & oversize handlebars & aero style seatposts. LIGHT OUTPUT: 20 lumens DIMENSIONS: 31 x 31 x 14mm WEIGHT: 18g STORAGE MODE: To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds & release when red LED comes on. This LED will stay lit until the light drops into storage mode. To reactivate light, plug into USB (Universal Serial Bus) port & charge as usual. Once charged light will turn on as before. CHARGING: When plugging the light into a USB (Universal Serial Bus) port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete. ...

Waterproof Allows the headlamp to be submerged in up to 1metre depth of water for a period of 30 mins. Bright Produces a seriously powerful punch for its size. Plenty of light for high visibility at night & ideal to be used as a daytime running light Modes Choose from 5 lighting modes to suit your riding conditions 2 Channel C.O.B Matrix 2 separate channels of C.O.B LEDs are independently controlled to create animated light output. Side Visibility A wrap-around lens ensures light is reflected sideways to keep you safer on the road. ...

The Knog Blinder Mini Square Lights Twinpack provides 50 Lumens (front) & 30 lumens (rear) of bright & 100% waterproofed performance with 12 hours max run time & multiple light output modes to suit your riding conditions. ...

Waterproof Allows the headlamp to be submerged in up to 1metre depth of water for a period of 30 mins. Bright Produces a seriously powerful punch for its size. Plenty of light for high visibility at night & ideal to be used as a day-time running light Modes Choose from 5 lighting modes to suit your riding conditions 2 Channel C.O.B Matrix 2 separate channels of C.O.B LEDs are independently controlled to create animated light output. Side Visibility A wrap-around lens ensures light is reflected sideways to keep you safer on the road. ...

The Knog Blinder Mini Square Rear Light provides 30 lumens of bright & 100% waterproofed performance with 12 hours max run time & multiple light output modes to suit your riding conditions. ...