K-Edge’s Combo Mount Go Pro Interface easily fits into your K-Edge Out-Front Garmin Mounts & XL Mounts to be able to lock in your Go Pro, Shimano, & VIRB style cameras underneath your Garmin Computer. The interface helps to stabilise your camera lessening the amount of shaking when you’re filming. ...

K-Edge Computer Mount for Garmin Edge: A precision-made secure & adjustable mount for your Garmin Edge which positions the Garmin computer display below the top of the handlebars, centred & in-front of the stem, giving the user an enhanced ergonomic view & being more air resistant. Compatible With: Edge, 200, 500, 510, 800 & 810 Fully adjustable for the different size units Weight: 30g No plastic parts Fits 31.8mm handlebars Long-lasting protective anodised two-tone fade finish Ensures the security of your Garmin computer with three locking points ...

The K-EDGE Pro Handlebar Mount
- XL was designed specifically to accommodate the larger size of the Garmin Edge&174; 1000. Our
...

Made from CNC machined aluminium the Computer Mount is optimised to withstand anything the road throws at you. Optimised to fit larger Garmin computers. The design centres the positioning of the computer making sure that it is in the best possible position for your to observe it but not get totally distracted by it. ...

K-Edge Computer mount for Garmin Edge/ Forerunner: A precision-made secure mount for your Garmin Edge/ Forerunner that is Compatible with all Edge/ Forerunner units that utilise the quarter turn bike mount system, & is fully adjustable for the different size units. The Garmin unit is centred & in front of the stem, giving the user an enhanced view of the data & positions the Garmin computer display below the top of the handlebars, giving a more aerodynamic location. With long-lasting protective anodised two-tone fade finish which also features a plastic insert that is kind to your computer & can be rotated through 90 degrees for the Forerunner series. K-Edge products are proudly CNC machined in the USA & have a lifetime warranty. Compatible With: Edge & Forerunner Fully adjustable for the different size units Weight: 30g Plastic insert that is kind to your computer Fits 31.8mm handlebars Long-lasting protective anodised two-tone fade finish ...

K-Edge Cyclo-Cross Clamp on Chain Catcher (Double): The Cyclo-Cross Clamp on Chain Catcher acts a ramp to guide your chain & virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket, helping to protect your frame & keep you in gear A simple precision-made component that provides valuable insurance against front derailleur malfunctions Specifically designed for the extreme conditions of cyclo-cross, it is designed to give the rider the confidence to front-shift in any situation Highly recommended to prevent structural damage to carbon & aluminium frames, but also protects the finish of any other frame material Clamps onto the frame independently of the front derailleur mount using its own lightweight clamp, so requires some round seat tube in the area below the derailleur Designed to work with all double chainring bikes Made from 6061 T6 heat treated aluminium Long-lasting protective anodised finish Adds only 22 grams of weight ...

A simple precision-made component that provides valuable insurance against front derailleur malfunctions Specifically designed for the extreme conditions of cyclo-cross, it is designed to give the rider the confidence to front-shift in any situation Highly recommended to prevent structural damage to carbon & aluminium frames, but also protects the finish of any other frame material Clamps onto the frame independently of the front derailleur mount using its own lightweight clamp, so requires some round seat tube in the area below the derailleur ...

K-Edge Cyclo-Cross Clamp on Chain Catcher (Single XL): The Chain Catcher acts as a ramp to guide your chain & virtually eliminates the possibility of your chain dropping off the chainring onto the bottom bracket, helping to protect your frame & keep you in gear. A simple precision-made component that prevents a chain jumping off a single chainring Specifically designed for the extreme conditions of cyclo-cross Highly recommended to prevent structural damage to carbon & aluminium frames, but also protects the finish of any other frame material Clamps onto the frame independently of the front derailleur mount using its own lightweight clamp, so requires some round seat tube in the area below the derailleur The XL extra-long version is suitable for frames with a flared seat-tube where the clamp has to be mounted higher up where there is round tubing Made from 6061 T6 heat treated aluminium Long-lasting protective anodised finish Adds only 23 grams of weight ...

A simple precision-made component that prevents a chain jumping off a single chainring Specifically designed for the extreme conditions of cyclo-cross Highly recommended to prevent structural damage to carbon & aluminium frames, but also protects the finish of any other frame material Clamps onto the frame independently of the front derailleur mount using its own lightweight clamp, so requires some round seat tube in the area below the derailleur The XL extra-long version is suitable for frames with a flared seat-tube where the clamp has to be mounted higher up where there is round tubing ...

K-Edge Dirt ACS Chain Device: K-Edge Dirt ACS is designed to help prevent chain suck & the subsequent damage that can occur to the chain stay. This is especially critical for mountain bikes that have carbon chain stays
- both hard tails & suspension frames. The adjustable pucks are compatible with a variety of chain ring sizes.

Includes:: pucks for triple & double chain ring setups. The K-Edge Dirt ACS is compatible with 68 & 73mm bottom bracket shells using outboard
- external cup bottom brackets. The K-Edge Dirt ACS attaches to the frame by replacing the 2.5mm drive side spacer. Most external bottom bracket configurations have either one or two 2.5mm spacers on the drive side (68mm bottom brackets have two 2.5mm spacers on the drive side & 73mm bottom brackets have one 2.5mm spacer). If your particular Crank/BB setup doesnt have at least one 2.5mm bottom bracket spacer on the drive side, the K-Edge Dirt ACS is not compatible. Installation Guide click here

Material: 6061 T6 aluminium & stainless steel Fitment: Mounts by replacing 2.5mm spacer on out-board bearing bottom bracket cups Weight: 26 grams Anodized colours: Black & Red





...