Compact & lightweight, it’s designed specifically for cycle applications. Its range of torque values is correct for cycle components & it comes with a set of 7 precision bits that cover every type of bolt or screw on a modern bike. The body of the 3T torque wrench is built of hard-anodized aluminium alloy, keeping the weight down to a record-breaking 169 g – less than half the weight of the heavy industrial workshop wrenches often used for bicycles. The kit, with all accessory bits, packs away into a robust, high-quality case, making it practical for use in the field. The lightweight of the tool makes it easy to reliably achieve low torque values. The torque range of 3–15 Nm is ideal for precision bicycle applications & 'sensitive' components. 3 Nm is low enough for small aluminium screws, such as used on some chainrings, while 15 Nm is enough for the burly M6 steel bolts used in some seatposts. The torque wrench is very easy to use. First, set the maximum torque by rotating the knurled adjuster knob at the end of the handle. The scale in the handle displays the torque value in 0.5 Nm increments. Next, insert the bit that fits your bolt. Now turn the bolt – as soon as you reach the dialed-in torque setting, the tool gives a loud ‘click’ & ‘lets go’ with a 3-degree free movement. The 7 accessory bits in the kit let the mechanic make almost any adjustment on a modern bicycle. The included 70 mm long, 5 mm hex bit makes it a breeze to access the recessed clamp bolt of road-brake levers, a notoriously hard task without the right tool. All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness assuring durability. The adjustment knob & bit-holder are made from steel. Torque tolerance is ±4%, according to UNI EN ISO 6789:2004 norm – we can supply you with a calibration certificate with SIT reference if you wish. Precise, compact & built to last, Torque Wrench Team lets professional & home mechanics dial up the exact torque values they need, avoiding the hazardous scenario of over- or under-tightening that can cause component failures. Every bike enthusiast can easily & confidently carry out advanced adjustments & rebuilds. It’s 3T’s first offering in the cycle tool market & comes laser-etched with the famous 3T logo – a piece of equipment any cycle mechanic will be proud to own. ...

3T Ultimate Windstopper Jacket: An Absolute must for any 3T fan, the Ultimate Windstopper Jacket is made for 3T by Castelli & combines bold 3T Graphics with the superb quality of Castelli clothing. Putting in those base miles over the winter & early spring should be as comfortable as possible. Thats why this jacket is cut to fit perfectly in the riding position, fully Windproof & water resistant. It has a high collar & long sleeves. The ykk vislon&174; zipper is easy to open & close with a gloved h&. The three open rear pockets are easy to access. Windproof & water resistant High collar YKK vislon&174; zipper Three open rear pockets ...

Buy now. Pay later on 3T Ventus II Ltd Carbon Aero Handlebar. 3T Ventus II Ltd Carbon Aero Handlebar: VENTUS II is a complete renewal of the iconic VENTUS. The basebar is all-new, & helps cut weight to 730g, 15% lighter than the original that in the hands of Fabian Cancellara & Gustav Larsson won gold & silver at the 2008 Beijing Olympics. Every aspect of the bars performance has been reviewed in the light of 4 years experience of top-level racing. Elbow-rest supports now fit into a recess on the top skin of the basebar so they cant skew out of true. The handhold & grips, which in some conditions could slip on the handholds, are replaced. Shimano Di 2 compatibility is introduced. As before, a full range of adjustment optimizes rider position. The extension bars adjust front-rear for reach, & vertically for height. Elbow pads move with the extensions, preserving a constant relationship between hands & elbows. The standard straight carbon-fiber extensions can be swapped for S-bend or ski-bend extensions, for a perfect custom fit for champion athletes of every physique. VENTUS II continues to set the standard by which all other triathlon aerobars are judged.

Width: 40cm

Material: HM carbon-fibre Drop: 40mm (basebar) Reach: 140mm (basebar) Angle: -17.5&176; Routing: Internal Finish: UD Gloss Black Stack: 35mm (clamp) Extensions/pads: Carbon-fibre comfort Certification: CEN



...

Every aspect of the bars performance has been reviewed in the light of 4 years experience of top-level racing. Elbow-rest supports now fit into a recess on the top skin of the basebar so they can’t skew out of true. The handhold & grips, which in some conditions could slip on the handholds, are replaced. Shimano Di 2 compatibility is introduced. As before, a full range of adjustment optimizes rider position. The extension bars adjust front-rear for reach, & vertically for height. Elbow pads move with the extensions, preserving a constant relationship between hands & elbows. The standard straight carbon-fiber extensions can be swapped for S-bend or ski-bend extensions, for a perfect custom fit for champion athletes of every physique. VENTUS II continues to set the standard by which all other triathlon aerobars are judged. ...

Buy now. Pay later on 3T Ventus Ltd Carbon Aero Handlebar. 3T Ventus Ltd Carbon Aero Handlebar: Olympic Gold & Silver medallist, Tour de France winner
- VENTUS is 3 Ts signature time-trial bar, expressing to the full our advanced F1-derived composites engineering for ultimate performance. With the thinnest wings, minimalist brake levers & aerodynamically integrated stem, the ventus is not only the lightest & most aero integrated aerobar in the world, it is also the first to have independent height adjustability. After all we want to fit the bike to the rider, not the other way round. That is why on the Ventus, the extensions move up & down with the elbow pads instead of being attached to the wing. This way the position of your elbows relative to your hands will not change when you raise or lower the aerobars. With its co molded carbon construction & integrated yet replaceable grips, the Ventus sets the new standard in aerobar design. Model: Ventus Ltd Weight: 850g

Width: 42cm

Material: Carbon Angle: +6 degree Routing: Internal Certification: CEN Full carbon extensions & arm rest cups




...

3T Vola Pro Aerobar: Vola Pro is the award-winning new entry model in 3 Ts race-proven range of aerobars. The basebar is in hydroformed aluminum, while the new Comfort cradles are in composite material. The alloy extensions are a new shape with a deep drop to clear the wrists, & can quickly & easily be released & re-clamped. Adjustability of the extensions is a key theme, with stack adjustable in the range 57-87 mm, separation between clips-ons/pads 226-292 mm, & reach to pads 20-70 mm. Complete Vola Pro package has riser kit with 10-, 20- & 30-mm spacers Weight: 830 g

Width: 42 cm Bar: 31.8 mm

Material: Carbon-fibre (cradles), Alloy (basebar) Routing: Internal Finish: Shot Peened/ Black Anodized Extensions/pads: Neoprene



...

The alloy extensions are a new shape with a deep drop to clear the wrists, & can quickly & easily be released & re-clamped. Adjustability of the extensions is a key theme, with stack adjustable in the range 57–87 mm, separation between clips-ons/pads 226–292 mm, & reach to pads 20–70 mm. Complete Vola Pro package has riser kit with 10-, 20- & 30-mm spacers ...

3T Vola Pro Alloy Basebar: The Vola Pro Alloy Basebar is an entry level basebar made from hydroformed alloy with tailored airofoil section for superior aerodynamics & tailored grip section for increased riding position to maximise speed & comfort.

Width: 42 cm Bar: 31.8 mm Material; Alloy Routing: Internal Finish: Shot Peened/ Black Anodized Please note: This is for the basebar only & is not supplied with extensions as shown in image

...

Base bar only for the 3 Ts Vola Pro aerobar kit. It is their award-winning entry model which is manufactured from hydroformed aluminium & when coupled with the extensions makes for a great choice to get low & aerodynamic on your TT/ Triathlon bike. ...

This Team model is the mid-range model of the award-winning Vola range & offers one of the most versatile aerobars around. At 380mm wide, it is narrower by 40mm than the Vola Pro version & its aero-optimised basebar is constructed with carbon fibre, cutting its weight by up to 15%. It's possible to achieve a super-low position on this model that's favoured by crono specialists with extension clamps mounted on the underside of the basebar. The width between the new comfort arm pads range 220mm to 340mm, measured at the pads outer edge. Its arm pad reach can be set from 20mm to 70mm ahead of the basebar centre, measured at the pads front edge. Like the Vola Pro, this version's arm pads rotate in their clamps & a reinforcing bridge is also included for a rigid, shake-free set-up. What's most impressive is it weighs in at just 810g in the low configuration which makes it a perfect choice of upgrade for shaving valuable seconds of your next racing time. ...