More From Contributor

£0.75
Solvent Cement jointing for a strong permanent connection ...
Available
£24.00
The 110mm Terracotta Back Inlet Gully Circular Lid has a 2nd inlet & is generally used in the middle of a pipe run such as a line of drainage on a patio. In these situations the gully should only be used for stormwater or rainwater & not foul drainage. The back inlet bottle gully has its own water seal to stop odours from coming out of the drainage/sewer system & by removing the grid & internal funnel acts as an accessible rodding point. The gully has two 110mm push-fit socket which can be connected to either spigots from bends or underground drainage pipes. The spigot on the hopper allows upto 32mm height adjustment. ...
Available
£14.50
The 92.5° Black Double Socket/ Spigot 110mm Branch Soil Pipe allows the connection of horizontal pipes to vertical soil stack systems at 92.5°. The branch has 2 closed side bosses which when when drilled out using a 50mm
- 57mm hole cutter & boss adaptors are fitted will allow 32mm 40mm & 50mm waste pipes to be connected to the soil stack. The soil pipe branch has a spigot at 1 end which should always form the lower joint.
...
Available
£7.80
The 110mm Black Double Socket Coupling is used to form a push-fit joint between 2 lengths of 110mm soil pipes. This product can also be used as a slip coupling by simply removing the centre stops in the middle of the product. ...
Available
£7.80
The 110mm Grey Double Socket Coupling is used to form a push-fit joint between 2 lengths of 110mm soil pipes. This product can also be used as a slip coupling by simply removing the centre stops in the middle of the product. ...
Available
£39.00
The 110mm Black Push-Fit Air Admittance Valve allows a soil stack fitted with an external air admittance valve to terminate within three metres of a window opening. This allows the pipe to terminate at the same height as if it were installed internally i.e. 200mm minimum above the highest wet entry point to the soil vent pipe. The use of an external air admittance valve eliminates the need for the soil stack to extend over the roof line saving on materials & time. ...
Available
£39.00
The 110mm Grey Push-Fit Air Admittance Valve allows a soil stack fitted with an external air admittance valve to terminate within three metres of a window opening. This allows the pipe to terminate at the same height as if it were installed internally i.e. 200mm minimum above the highest wet entry point to the soil vent pipe. The use of an external air admittance valve eliminates the need for the soil stack to extend over the roof line saving on materials & time. ...
Available
£16.00
The 110mm Terracotta Rectangular Drain Inlet Hopper is generally used in conjunction with P traps. The hopper head is connected via the spigot which push-fits into the P Trap. The rectangular hopper has two closed side bosses which when drilled out using a 50mm
- 57mm hole cutter & boss adaptors are fitted will allow 32mm 40mm & 50mm waste pipes to be connected to the drainage system. More commonly waste pipes/downpipes are connected above ground via the grate which can be cut to suit the pipes.
...
Available
£4.70
The 110mm Black Single Socket Coupling is used when you need a joint between 2 lengths of 110mm pipe. The product offers a solvent weld at 1 end which should always be at the lower end of the installation & push fit the other end. ...
Available
£4.70
The 110mm Grey Single Socket Coupling is used when you need a joint between 2 lengths of 110mm pipe. The product offers a solvent weld at 1 end which should always be at the lower end of the installation & push fit the other end. ...
Available

FloPlast 110mm Drain Adjustable Bend Double Socket 0° To 90° -
Terracotta

The 0° to 90° Terracotta Socket 110mm Drain Adjustable Bend has a double socket and allows you to adjust the bend angle 0° to 90° to suit a situation when a standard fixed angle bend will not form the desired angle.
  • Availability: In Stock
  • Supplier: Wickes
  • SKU: 175655
Availability: In Stock
£11.80

Product Description

The 0° to 90° Terracotta Socket 110mm Drain Adjustable Bend has a double socket & means that you can adjust the bend angle 0° to 90° to suit a situation when a standard fixed angle bend will not form the desired angle.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Adjustable - Something that can be changed or slightly modified to fit.
Adjustable - Something that can be changed in order to fit better.

Supplier Information

Wickes
Wickes began trading in 1972 as a do-it-yourself store. They now have over 200 stores throughout the UK. The company focus on supplying products to the building trade, as well as materials for home improvement projects. Their products range from fitted kitchens and bathrooms, to all manner of building supplies. They sell doors, windows, flooring, tiles, paint, wallpaper, decorative materials, lighting, heating, plumbing, work wear and gardening supplies. They also offer professionally designed bespoke kitchens and bathrooms, alongside their budget take home ranges. The company was purchased by the builders merchants Travis Perkins in 2005. They now also have stores in mainland Europe, Ireland and South Africa.
Page Updated: 2024-03-11 16:32:19

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu