This submersible pressure-switch operated water pump is the solution for a working system. Standard pumps basically transfer from A to B, this pump has the features detailed below, allowing the operator to work with the water away from the pump & when stopping the pump is necessary the pump will sense when demand for water has stopped & will then shut down. On sensing a drop in the water pressure in the discharge line the pump will start automatically thus eliminating the need for the operator to walk back the pump / starter to start & stop the pump. In addition there is also automatic control of the pump in low water level conditions, ensuring the pump does not run dry. The pump runs off a single phase supply. Submersible pumps with built-in integrated electronics designed to automatically start & stop the pump & prevent against dry running.  Can be used as a water butts pump or with a rainwater tanks. Built-in electronic pressure switch & flow sensor Equipped with dry-run protection & built-in non return valve Easy to use High reliability Available with 3 or 4 impellers Supplied with 15 metre power cord Available with screen filter or stainless steel ring for use of suction kit   To protect the pump & subject to the system operating cycle it may be necessary to include an expansion vessel in the discharge pipe from the pump. Performance Range Flow rate up to 120 l/min (7.2 m 3/h) Head up to 42m Restart Pressure: 1.5 bar Application Limits: 5m maximum immersion depth Maximum heigh between pump & point of use 10m Maximum liquid temperature +40 C. Suction down to 22mm above ground level Continuous service S1 ...

The GMD1000M submersible pressure-switch operated water pump is the solution for a working system. Standard pumps basically transfer from A to B, this pump has the features detailed below, allowing the operator to work with the water away from the pump & when stopping the pump is necessary the pump will sense when demand for water has stopped & will then shut down. On sensing a drop in the water pressure in the discharge line the pump will start automatically thus eliminating the need for the operator to walk back the pump / starter to start & stop the pump. In addition there is also automatic control of the pump in low water level conditions, ensuring the pump does not run dry. The pump runs off a single phase supply. Submersible pumps with built-in integrated electronics designed to automatically start & stop the pump & prevent against dry running.  Can be used as a water butts pump or with a rainwater tanks. Built-in electronic pressure switch & flow sensor Equipped with dry-run protection & built-in non return valve Easy to use High reliability Available with 3 or 4 impellers Supplied with 15 metre power cord Available with screen filter or stainless steel ring for use of suction kit   To protect the pump & subject to the system operating cycle it may be necessary to include an expansion vessel in the discharge pipe from the pump. Height
- 450mm Diameter
- 150mm Discharge Connection
- 30mm Head
- 35m (3.5 Bar) Discharge Port
- 1 inch diameter Cable Length
- 15 metres Weight
- 11 kgs Power supply
- 230V single phase







...

This submersible pump is perfect for clean water applications that have sand content of up to 50 g/m‚³. The pump features a max flow rate of 100 l/min (6 m‚³/h) & head of 42m. The pump has multiple impellers to increase performance & efficiency. The pump can be used for many different tasks such supplying water from domestic reservoirs, drawing rainwater from cisterns as well as irrigation purposes. The IP68 sealed, asynchronous single-phase motor is cooled by the pumped water, allowing simple & safe usage. Supplied with 10m Neoprene power cable "H05 RN-F" with Schuko plug. Technical product information: Liquid Type: Clean Water Power Supply: Single Phase 230V 50 Hz k W: 0, 55 Hp: 0, 75 Flow Rate Q L/min: 10 · 80 Head H Metres: 40 · 5 Weight: 9.4kg Power Cable: 10 Meter Float Switch: with Float Switch Pump Body: Technopolymer Impeller: Noryl Motor

Features: Shaft with double seal / oil chamber

...

Sembra’s Big Summer Flowers Garden Growing Play Kit is a fun way for children to grow Sunflowers, Daisies, Marigolds & Geraniums at home. This educational toy allows the children to enjoy & explore nature while sharing this experience with the family. They are able to spend quality time with the family as they watch their own creations flourish, this product encourages patience, responsibilities as well as healthy eating. Sembra's Summer Flowers Garden Growing Play Kit
Includes:: 4 seed sachets of easy-to-grow varieties: sunflower, daisy, Mexican marigold & geranium. 12 round biodegradable plant pots to sow the seeds. A special substrate bag for the seedbeds. A tray on which to place the small pots. 10 durable & reusable labels to identify what’s being sown. It also contains a step-by-step illustrated guide with good advice on how to sow the seeds & look after your plants until harvest time. Box Dimensions: 34 x 9.5 x 25.5 cm
...

Sembra’s Summer Lettuce Vegetable Garden Kit is a fun way for children to grow vegetables in their own home. This educational toy allows the children to enjoy & explore nature while sharing this experience with the family. They are able to spend quality time with the family as they watch their own creations flourish, this product encourages patience, responsibilities as well as healthy eating. The Summer Lettuce Vegetable Garden Kit
Includes:: 1 seed envelope: Summer Wonder Lettuce 6 biodegradable pots to plant seeds Labels Tray Substrate It also contains a step-by-step illustrated guide with good advice on how to sow the seeds, replant them & harvest them. Box Dimensions: W17 H25.5 D9.5
...

This stunning water feature from Kelkay is also a piece of art that looks spectacular in any garden & will constantly catch ...

Sembra’s Sunflower Garden Growing Kit is a fun way for children to grow flowers in their own homes. This educational toy allows the children to enjoy & explore nature while sharing this experience with the family. They are able to spend quality time with the family as they watch their own creations flourish, this product encourages patience, responsibilities as well as healthy eating. The Sunflower Garden Growing Kit
Includes:: 1 seed sachet: Sunflower. 3 round biodegradable plant pots to sow the seeds. A special substrate bag for the seedbeds. 3 durable & reusable labels to identify what’s being sown. It also contains a step-by-step illustrated guide with good advice on how to sow the seeds, replant them & harvest them. Box Dimensions: 17 x 9.5 x 25.5 cm
...

These green Sunny Fixing Pegs are for the Sunny Forcing Cloche, they will hold the dome in place when there’s strong winds or if you’re working nearby & accidentally nudge it. This pack comes with 10 fixing pegs that have a discreet flat topper & ridged lengths to help them stay securely in the ground. ...

If you’ve got a Sunny Growing Tunnel, we would recommend getting these green Sunny Fixing Pegs to hold it in place. They will prevent it from shifting in strong winds or when you’re working near it. This pack contains 10 fixing pegs which will easily distribute along each side of the 1.05m length of the Sunny Growing Tunnel. ...

These Graff Sunny Growing Tunnel End Caps are a great accessory for the Sunny Growing Tunnel polytunnel. These four-sided clear plastic caps can be fitted at either end of the tunnel & are a useful item for anyone who wants to grow their own produce using a tunnel. ...