The Green Johanna was developed in Sweden to provide a simple, easy to use compost system to safely compost all degradable kitchen waste all year round! The well thought out, patented design of Green Johanna means you do not have to know much about composting
- with Green Johanna everyone can compost now! Green Johanna can compost two parts food waste to one part garden waste. All food waste including meat, fish & bones can be put in Green Johanna.
Includes:: 1 x Mixing Stick 4 x Outer Rings 1 x Lid 1 x Base 2 x Doors 1 x Bag of Fixing Screws 1 X Instruction Manual Food waste composting To fully appreciate Green Johannas design it helps to consider what is necessary to recycle waste the way nature does. Every year the same natural cycle occurs; leaves, twigs & trees fall to earth, decompose & become food for new plants. Naturally occurring micro-organisms, bugs & worms, together with oxygen & moisture do all the work. In the process heat is produced. Some very valuable micro-organisms work at temperatures as high as 65C (150F).  This is hot composting, oxygen in the air is critical to the process. Dimensions: Height 94 cm Diameter of lid 54 cm Diameter of base 82 cm Weight 9.5kg (10kg with box) Volume 11.4 cu ft/330 litre Green Cone Accelerator Powder (3 Pack) Our Green Cone Accelerator Powder (3 Pack) will ensure that a healthy population of safe bacteria is present & the degradation process works efficiently in your waste disposal unit. We recommend using the accelerator power in small amounts to kick start your composter. (Can be used anytime to give a boost!) Green Johanna Winter Jacket The Green Johanna Winter Jacket is used to wrap around your composter during the winter in order to maintain the composting process in low temperatures.  

...

Crafted from a gorgeous soft touch velvet fabric, this footstool is the perfect place to rest your legs after a long day. This stylish, multi-functional pouffe is fashioned in a stunning green effect & can also be used anywhere in the house including the living room, bed room or even in the kids games room/play room. Add style & comfort to your home. Maximum weight capacity 120kg. Dimensions:
Size: Length 40cm x Width 40cm x Height 33cm
...

This high-quality Graf Green Water Butt Stand is suitable for a wide range of butts, including our 210L Round Water Butt & our 200L Rainfall Harvester Water Butt The stand is manufactured from 100% recycled PP Plastics, & creates a sturdy base for the water butt. The stand also raises the water butt by 33cm, providing easier access to the tap, & allowing for the water butt to be used for gravity-fed irrigation. Diamentions:

Height: 33cm / 330mm / 13" Diameter: 50cm / 500mm / 20" The maximum weight is 280kg when filled with water.

...

This Harcostar Grey 168L Water Butt Barrel comes complete with Multi Piece Water Butt Stand & Harcostar Universal Rain Trap Diverter The Water Butt

Includes:: tap & a child-safe lockable lid. Perfect for collecting water to recycle in your garden, & will save you some money on your water bill. To maintain this waterbutt, we've got you covered!
- All you'll need is one of our Microbial Discs or our Treatment Bottle just for waterbutts! Dimensions: Water Butt
- Height: 82cm / Diameter: 58cm Stand
-

Height: 30cm / Diameter: 50cm






...

The 227L Harcostar Water Butt Barrel in Grey is made from recycled plastic & is ideal to help recycle rainwater for use around your garden. It

Includes:: the tap & a child-safe lockable lid. Not only does it help to reuse rainwater but it will also allow you to save money on your water bills. This water butt also comes with a 5 year warranty on manufacturing defects. Made with durable plastic for all weathers!  Lastly, this slick pearly grey waterbutt adds a clean refreshing style if you are looking to keep it simple in the garden... Dimensions: Diameter: 60cm

Height: 100cm Please note: Other accessories such as stands & diverters are not included & have to be purchased separately.



...

The 227L Harcostar Water Butt Barrel is made from recycled plastic & has a grey finish. It

Includes:: the tap

...

This is the top half to the  Gutter Mate Diverter & Filter in black, the revolutionary solution to your guttering filtering problems. This a spare part for the Gutter Mate & it sits neatly on top of it covering the filter & under the downpipe. This item isn't fitted on with screws or bolts which means that it can be easily removed on for you to inspect the filter to check if it needs to be cleaned. You can simply remove it, & then put it back into place once you have cleaned the filter. This can accept a downpipe of up to 68mm in diameter. This is a part of the revolutionary Gutter Mate diverter & Filter which can provide you with filtered rainwater & protect your water butts, tanks & soakaways from blockages which are expensive to repair. It saves you time & money, meaning that you don't have to worry about debris, mould & leaves building up in your guttering. ...

This is the top half to the Gutter Mate Diverter & Filter, the revolutionary solution to your guttering filtering problems. This a spare part for the Gutter Mate & it sits neatly on top of it covering the filter & under the downpipe. This item isn't fitted on with screws or bolts which means that it can be easily removed on for you to inspect the filter to check if it needs to be cleaned. You can simply remove it, & then put it back into place once you have cleaned the filter. This can accept a downpipe of up to 68mm in diameter. This is a part of the revolutionary Gutter Mate diverter & Filter which can provide you with filtered rainwater & protect your water butts, tanks & soakaways from blockages which are expensive to repair. It saves you time & money, meaning that you don't have to worry about debris, mould & leaves building up in your guttering. ...

This is the top half to the Gutter Mate Diverter & Filter, the revolutionary solution to your guttering filtering problems. This a spare part for the Gutter Mate & it sits neatly on top of it covering the filter & under the downpipe. This item isn't fitted on with screws or bolts which means that it can be easily removed on for you to inspect the filter to check if it needs to be cleaned. You can simply remove it, & then put it back into place once you have cleaned the filter. This can accept a downpipe of up to 68mm in diameter. This is a part of the revolutionary Gutter Mate diverter & Filter which can provide you with filtered rainwater & protect your water butts, tanks & soakaways from blockages which are expensive to repair. It saves you time & money, meaning that you don't have to worry about debris, mould & leaves building up in your guttering. ...

The Award Winning Gutter Mate Diverter & Filter Recycle rainwater straight from your downpipe. The UK's best selling, award winning Diverter & Filter. The only rainwater diverter & rainsaver that filters all rainwater before it enters the water butt, tank, drain or soakaway. The diverter then automatically shuts off the flow to the water butt when full. Collecting rainwater with the Gutter Mate is both simple & efficient, whether you are saving rainwater to a water butt, tank or a full rainwater harvesting system. Also available in brown or white. Stocked in the UK &

Includes:: Free UK Mainland delivery. Popular ways the Gutter Mate Diverter & filter is used: To protect your soakway from blockages. To collect filtered rainwater to keep your pond full of fresh water. Irrigation for domestic & commercial gardens, lawns & greenhouses. Collect & filter rainwater from your guttering & downpipe. Rainwater for household appliances such as a washing machine or toilet. Not just a standard diverter. A peace of mind solution to rainwater collection. No ladders, no danger. It can be fitted & maintained at ground level
- quick & easy to clean. Remove the filter basket & clean in less than 30 seconds
- no blockages. The unique filter prevents expensive & time consuming blockages from occurring to your water butt, hose & soakway. Super-efficient collection. Once your waterbutt or tank is full, water is automatically diverted to flow down your downpipe as normal. Benefits of the Gutter Mate Rainwater Diverter & Filter The only filter diverter which filters all the rainwater coming down the downpipe. The only filter which means that you can use both outlets from the filter for your water collection & the water from both has been filtered. Keeps you safe, no need to go up the ladder. Only takes 30 seconds to clean the filter. Saves money
- you don't have to pay someone to clean your gutters. Debris from the guttering is collected in the filter. Clear gutters help protect roof joists from wet rot sometimes caused by blocked, full or overflowing gutters Rainwater collection is easy efficient & cost effective. You can use either the diverter outlet or the main outlet of the Gutter Mate to save your rain water. Whichever is used the water has been filtered. Gutter Mate is the best protection you can get for your soakaway or drains
- as all rainwater going into either has been filtered. Inspection of the filter possible without dismantling. Eliminates the need for the balloon/bell type strainer in the top of the drainpipe/downpipe. The major cause of blocked gutters. Helps protect roof joists & walls from damp. Compatible with 60mm square downpipes if the wall thickness is 2mm or less. Green Apple Award Winner
- click to read more. Watch our step-by-step guide on how to set up your Guttermate diverter & filter Watch our fitting instructions for our Fine Mesh Insert Additional Technical Information What's in the Box? Each box contains: Gutter Mate Filter Square to round adaptor for Square Downpipes Blanking Cap for Diverter outlet, if needed Hose Adaptor for Water Butt Screws & plugs for fitting Gutter mate to wall. 500mm of hose to connect Gutter Mate to water butt or tank. Subject to distance between Gutter mate & water butt / tank a longer length of hose may be needed. Which is available on this link Gutter Mate hose The Gutter Mate rainwater diverter & filter is made from Polypropylene & is available in Black, White or Brown, to suit the colour of your drainpipe. The product is supplied with the fixing screws & mounting bracket. There are 5 parts to the filter which are a slide fit into each other. The filter basket filters all the rainwater which falls down the downpipe. The user has the choice of using the Diverter outlet (the smaller of the 2) or the main outlet to divert the rain water into a rainwater tub or rain water harvesting tank. If the degree of filtration is inadequate for the use you are putting the rain water too, we have a Fine Mesh Insert available which fits into the filter basket & provides a far higher degree of filtration (800 micron). This will allow you to use the rainwater in your pressure washer & for washing the car. If your guttering is attached to square downpipe, there is an adaptor in the box to allow the filter to be fitted to square drainpipes which are installed with close fitting brackets. If you have standard brackets you will not need the adaptor. This rain water filter goes a long way to solving an age old problem associated with guttering & drainpipe systems on buildings. The biggest problem with guttering is it gets filled with leaves, stones, sand & moss. The result can be blockages or over flowing gutters. This in turn can lead to damp penetrating the wall of your building or damp getting to the roof joists. Gutter blockage & overflow can lead to extremely expensive repairs to your property. The other problem associated with blocked guttering & drainpipes is the inherent danger of inspecting & cleaning them. Use of ladders should be avoided at all times if there is an alternative, namely the Gutter Mate Filter. Downpipe (Drainpipe) Sizes The Gutter Mate is designed to accept 68mm, 76mm & 80mm diameter round downpipes & 65mm & 75mm square downpipes, without any adaptors or reducers, other than the square to round adaptor supplied with the filter, if needed as per the instructions. This adaptor is used if your square downpipe is fitted using €œclose fitting mounting brackets€ to your house. If the downpipe is fitted with €œstandoff mounting brackets€, the square to round adaptor is not needed. If the downpipe is larger than 80mm you will need a male to female reducer to get into the top of the filter. The Gutter Mate filter should not be used on downpipes larger than 100mm diameter & if using this diameter of downpipe consideration should be given as to the total roof area the filter is rainwater collecting from. The Gutter Mate rain water collecting filter can be used in the following applications. Two common sizes of downpipe for Greenhouses, sheds & garages are 50 & 40mm diameter downpipes. In addition there are some metal downpipe sizes where the internal diameter of the pipe is too small to accept the main outlet of the Gutter Mate. The filter can be used on these downpipes, when using these sizes a male female reducer will be needed for connection to the main outlet of the filter. The standard reducer available is 68mm female to 50mm, this can be used on either 40 or 50 mm. downpipe. What's in the Box? Each box contains: Gutter Mate Filter Square to round adaptor for Square Downpipes Blanking Cap for Diverter outlet, if needed Hose Adaptor for Water Butt Screws & plugs for fitting Gutter mate to wall. 500mm of hose to connect Gutter Mate to water butt or tank. Subject to distance between Gutter mate & water butt / tank a longer length of hose may be needed. Which is available on this link Gutter Mate hose The Gutter Mate rainwater diverter & filter is made from Polypropylene & is available in Black, White or Brown, to suit the colour of your drainpipe. The product is supplied with the fixing screws & mounting bracket. There are 5 parts to the filter which are a slide fit into each other. The filter basket filters all the rainwater which falls down the downpipe. The user has the choice of using the Diverter outlet (the smaller of the 2) or the main outlet to divert the rain water into a rainwater tub or rain water harvesting tank. If the degree of filtration is inadequate for the use you are putting the rain water too, we have a Fine Mesh Insert available which fits into the filter basket & provides a far higher degree of filtration (800 micron). This will allow you to use the rainwater in your pressure washer & for washing the car. If your guttering is attached to square downpipe, there is an adaptor in the box to allow the filter to be fitted to square drainpipes which are installed with close fitting brackets. If you have standard brackets you will not need the adaptor. This rain water filter goes a long way to solving an age old problem associated with guttering & drainpipe systems on buildings. The biggest problem with guttering is it gets filled with leaves, stones, sand & moss. The result can be blockages or over flowing gutters. This in turn can lead to damp penetrating the wall of your building or damp getting to the roof joists. Gutter blockage & overflow can lead to extremely expensive repairs to your property. The other problem associated with blocked guttering & drainpipes is the inherent danger of inspecting & cleaning them. Use of ladders should be avoided at all times if there is an alternative, namely the Gutter Mate Filter. Downpipe (Drainpipe) Sizes The Gutter Mate is designed to accept 68mm, 76mm & 80mm diameter & 65mm & 75mm square downpipes, without any adaptors or reducers, other than the square to round adaptor supplied with the filter, if needed as per the instructions. This adaptor is used if your square downpipe is fitted using “close fitting mounting brackets” to your house. If the downpipe is fitted with “standoff mounting brackets”, the square to round adaptor is not needed. If the downpipe is larger than 80mm you will need a male to female reducer to get into the top of the filter. The Gutter Mate filter should not be used on downpipes larger than 100mm diameter & if using this diameter of downpipe consideration should be given as to the total roof area the filter is rainwater collecting from. The Gutter Mate rain water collecting filter can be used in the following applications. Two common sizes of downpipe for Greenhouses, sheds & garages are 50 & 40mm diameter downpipes. In addition there are some metal downpipe sizes where the internal diameter of the pipe is too small to accept the main outlet of the Gutter Mate. The filter can be used on these downpipes, when using these sizes a male female reducer will be needed for connection to the main outlet of the filter. The standard reducer available is 68mm female to 50mm, this can be used on either 40 or 50 mm. downpipe.






...