This industrial, self-priming 110v to 230v water pump operates on single phase 240V power supply & can be connected via a standard 3 pin plug with suitable fuse
- a good choice when intermittant use means the pump will be stationary for long periods of time. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens. The Gm 80 is a single stage, self-priming 'jet' pump with a 304 stainless steel body & impeller. Motor supports are in aluminum, with venturis in thermoplastic. It has a stainless steel shaft fitted with a carbon ceramic & NBR mechanical seal & IP44 motor. Single phase motors incorporate an overload protection device. Designed for pumping clean water only at maximum temperature of 35ºC & should not be allowed to run dry. Inlet (BSPF) 1” Outlet (BSPF) 1” KW 0.60 Volt 110.230 Flow (l/min) 55 Head (mtrs) 38 W x l x h (mm) 166 x 320 x 180 Dry weight (kgs) 6.10 Packing weight (kgs) 6.60f