Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 40 Metre Grey UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

40m White Network Cable CAT6 UTP LSOH High quality CAT6 network patch cable. RJ45 connector each end. LSOH CAT6 cable. Moulded connector boot. Length 40m Colour white. ...

The UT-899248 is a 48 port 2U rack mountable CAT5e patch panel which is a great solution for network & cable management. The UT-899248 offers a clearly labelled neat & effective CAT5e pass through panel which is ideal for the heart of any small network.

Specification • Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.• Support T568 A & B wiring & Easy installation.• Dual IDC connector can accept 22-26 AWG solid & stranded UTP cables.• Compatible with 110 or Krone Tools.• Backwards compatible with Category 3 & 5.• All versions can be mounted in 19” Racks.• Supplied with a cable management bars

...

The HD-EX358 HDMI extender uses HDbit T technology to transmit a HDMI signal over a single Ethernet cable this allows a maximum transmission distance of up to 394feet (120mtrs) using a CAT6 network cable. The highest resolution supported is 4k x 2k (3840 x 2160 @30 Hz). Maximum Transmission Distance 4k 30 Hz / 1080p 60 Hz CAT6
- 120m CAT5e
- 100m CAT5
- 80m Specifications Supports resolutions up to ultra HD 4K x 2K @ 30 Hz Transmits up to 120 meters Uses a single CAT5/CAT5e or CAT6 cable Supports infra red remote control IR signal 20k Hz to 60k Hz Supports standard audio Direct Stream Digital (DSD) & HD (HBR) audio Metal heat sink design HDMI 1.4 & HDCP 1.4 compliant Contents HDMI Transmitter HDMI Receiver IR Sensors 5V PSU Quick install quide


...

4k HDMI Over Ethernet Extender with IR remote control using HDBase T technology enables an HDMI display to be located up to 70 metres away from the source device. It can conveniently be extended using only one Cat 5e / 6 / 6a / 7 cable which is cost-effective. It not only supports HDMI (3D Deep Colour) but also Ultra HD 4k x 2k & is HDCP 2.2 compatible. It is perfect for the meeting room home theater or any installation that needs long distance transmission & superior video quality. Long distance transmission
- up to 70 metres Using CAT5e / CAT6 60m for up to 1080P @ 60 Hz 36bpp 35m for 1080p @ 60 Hz 48bpp 1080P @ 60 Hz 3D 4kx 2k @ 30 Hz Using CAT6A / CAT7 70m for up to 1080P @ 60 Hz 36bpp 40m for 1080P @ 60 Hz 48bpp 1080P @ 60 Hz 3D 4kx 2k @ 30 Hz Features Extends the distance between HDMI source & HDMI display Implements HDBase T extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter & receiver HDMI (3D Deep Colour 4kx 2k) Supports HDCP 2.2 Extends Infra Red remote control signals Anti-jamming – resists signal interference during high-quality video transmission using HDBase T technology Supports resolutions of up to Ultra HD 4kx 2k & 1080p Full HD Supports up to 340 M Hz bandwidth for high performance video Signaling rates up to 3.4 Gbits Supports Dolby True HD & DTS HD Master Audio Built-in 8KV / 15KV ESD protection (Contact voltage 8KV; Air voltage 15 KV) Support 20-60k Hz wide frequency devices & Bi-directional IR transmission. Power consumption: TX: <3.5W; RX <6W Product dimension: 98.5 (L)*96.5 (W)*23 (H) mm
...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as CAT5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 4 Meter Black UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR Full copper ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 4 Metre White UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 4 Metre Red UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR Full Copper ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as CAT5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 4 Meter violet UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

4 x 2 HDMI matrix switch manual remote controlled

Specification Switch easily between any four HDMI sources Distributes

...