About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

VSK 3000B-U3/U2
VSK 3000B-U3/U2
£31.56
Form Factor\n Micro Tower\n\n Motherboard Support\n Micro ATX\n Mini-ITX\n\n PSU Support\n Standard ATX, Micro ATX\n\n Water Cooling Ready\n No\n\n Dimensions\n 173mm x 365mm x 393mm (W x H x D)\n\n Packaging Dimensions\n 210mm x 450mm x 400mm (W x H x D)\n\n Body Material\n SGCC\n\n Front Bezel Material\n Plastic\n\n Side Panel\n Vented\n\n Expansion Bays\n External Bays:2 x 5.25" External\n 1 x 3.5" External\n Internal Bays:2 x 3.5" Internal\n 1 x 2.5" Internal\n Drive Bay Notes:-\n Expansion Slots:4 x Full Size\n\n\n Case Cooling\n Cooling Front:1 x 92 mm front intake fan (optional) \n Cooling Top:none\n Cooling Rear:1 x 92 mm rear exhaust fan\n Cooling Side: None\n Cooling Bottom: None\n\n IO Ports\n 1 x USB (Universal Serial Bus) 3.0\n 1 x USB (Universal Serial Bus) 2.0\n 1 x HD Audio (Also Supports AC'97)\n 1 x Microphone\n\n Front Bezel Colour\n Black\n\n Body Colour\n Black\n\n PSU Included\n No\n\n PSU Connections\n N/A\n\n Net Weight (KGs)\n 4.1kg\n\n\n\n\n\n\n\n Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=14004985&l=en\n\n ...
Available
VSK 3000B-U3/U2
VSK 3000B-U3/U2
£31.56
Form Factor\n Micro Tower\n\n Motherboard Support\n Micro ATX\n Mini-ITX\n\n PSU Support\n Standard ATX, Micro ATX\n\n Water Cooling Ready\n No\n\n Dimensions\n 173mm x 365mm x 393mm (W x H x D)\n\n Packaging Dimensions\n 210mm x 450mm x 400mm (W x H x D)\n\n Body Material\n SGCC\n\n Front Bezel Material\n Plastic\n\n Side Panel\n Vented\n\n Expansion Bays\n External Bays:2 x 5.25" External\n 1 x 3.5" External\n Internal Bays:2 x 3.5" Internal\n 1 x 2.5" Internal\n Drive Bay Notes:-\n Expansion Slots:4 x Full Size\n\n\n Case Cooling\n Cooling Front:1 x 92 mm front intake fan (optional) \n Cooling Top:none\n Cooling Rear:1 x 92 mm rear exhaust fan\n Cooling Side: None\n Cooling Bottom: None\n\n IO Ports\n 1 x USB (Universal Serial Bus) 3.0\n 1 x USB (Universal Serial Bus) 2.0\n 1 x HD Audio (Also Supports AC'97)\n 1 x Microphone\n\n Front Bezel Colour\n Black\n\n Body Colour\n Black\n\n PSU Included\n No\n\n PSU Connections\n N/A\n\n Net Weight (KGs)\n 4.1kg\n\n\n\n\n\n\n\n Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=14004985&l=en\n\n ...
Available
VSK 4000B-U3/U2
VSK 4000B-U3/U2
£33.78
Designed for new & experienced system builders looking for a versatile, reliable enclosure for the home or office comes Antec&209;&143;"&144;&149;&156;s VSK4000B. Constructed with durable, galvanized steel, the VSK4000B is a tough case meant to last for several builds without fail. The VSK4000B is also made to keep your components cool thanks to its bottom & front side vents, 120 mm rear fan, 120 mm front fan mount & rear water cooling support while meeting Intel&209;&143;"&144;&149;&156; Thermally Advantaged Chassis (TAC) 2.0 guidelines. Furthermore, the stylish black front panel is equipped with a USB (Universal Serial Bus) 3.0 port, USB (Universal Serial Bus) 2.0 port, Audio In/ Out jacks & other essentials for your home or office needs. The chassis is finished off with an all black interior finish.\n\n Features\n- Interior
- All black finish.\n- Cable Routing
- Grommet-lined cable routing holes with 36 mm of space behind the motherboard tray.\n- Expansion
- 7 expansion slots.\n- Sturdy & Stable
- Sturdy steel frame for durability.\n- Solid Metal construction
- High quality SGCC.\n\n Model\n VSK-4000B-U3/U2\n\n Form Factor\n Mid Tower\n\n Motherboard Support\n ATX\n Micro ATX\n Mini-ITX\n\n Material\n Steel\n\n I/O Ports\n 1 x Headphone\n 1 x Mic In\n 1 x USB (Universal Serial Bus) 2.0\n 1 x USB (Universal Serial Bus) 3.0\n\n Drive Bays\n 1 x 3.5" External\n 5 x 3.5" Internal\n 3 x 5.25" External\n\n Expansion Slots\n 7\n\n Fan Bays\n 2 x 120 mm\n\n Fans Included\n 1 x 120 mm\n\n Side Window\n No\n\n Power Supply Support\n ATX\n\n Max VGA Card Length\n 318 mm\n\n Colour\n Black\n\n Dimensions (W x H x D )\n 185 x 440 x 412 mm\n\n\n\n\n\n\n\n Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=14004984&l=en\n\n




...
Available
VSK 4000B-U3/U2
VSK 4000B-U3/U2
£33.78
Designed for new & experienced system builders looking for a versatile, reliable enclosure for the home or office comes Antec&209;&143;"&144;&149;&156;s VSK4000B. Constructed with durable, galvanized steel, the VSK4000B is a tough case meant to last for several builds without fail. The VSK4000B is also made to keep your components cool thanks to its bottom & front side vents, 120 mm rear fan, 120 mm front fan mount & rear water cooling support while meeting Intel&209;&143;"&144;&149;&156; Thermally Advantaged Chassis (TAC) 2.0 guidelines. Furthermore, the stylish black front panel is equipped with a USB (Universal Serial Bus) 3.0 port, USB (Universal Serial Bus) 2.0 port, Audio In/ Out jacks & other essentials for your home or office needs. The chassis is finished off with an all black interior finish.\n\n Features\n- Interior
- All black finish.\n- Cable Routing
- Grommet-lined cable routing holes with 36 mm of space behind the motherboard tray.\n- Expansion
- 7 expansion slots.\n- Sturdy & Stable
- Sturdy steel frame for durability.\n- Solid Metal construction
- High quality SGCC.\n\n Model\n VSK-4000B-U3/U2\n\n Form Factor\n Mid Tower\n\n Motherboard Support\n ATX\n Micro ATX\n Mini-ITX\n\n Material\n Steel\n\n I/O Ports\n 1 x Headphone\n 1 x Mic In\n 1 x USB (Universal Serial Bus) 2.0\n 1 x USB (Universal Serial Bus) 3.0\n\n Drive Bays\n 1 x 3.5" External\n 5 x 3.5" Internal\n 3 x 5.25" External\n\n Expansion Slots\n 7\n\n Fan Bays\n 2 x 120 mm\n\n Fans Included\n 1 x 120 mm\n\n Side Window\n No\n\n Power Supply Support\n ATX\n\n Max VGA Card Length\n 318 mm\n\n Colour\n Black\n\n Dimensions (W x H x D )\n 185 x 440 x 412 mm\n\n\n\n\n\n\n\n Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=14004984&l=en\n\n




...
Available
VSK-10
VSK-10
£42.16
Value Solution Series
- VSK 10\n Highly Functional Micro-ATX Case\n\n Get the Second Ones, Have Better Cooling\n Strong Case Fan
...
Available
VSP2100-K 8-Port Gigabit Layer 2+ Managed PoE+ Switch with 2 SFP Uplink Ports
VSP2100-K 8-Port
Gigabit Layer 2+
Managed Po E+ Switch
With 2 SFP Uplink
Ports
£136.47
Vigor Switch P2100\n 8-Port Gigabit Layer 2+ Managed Po E+ Switch with 2 SFP Uplink Ports\n The Vigor Switch P2100 is a high-performance, Layer 2+ Managed Ethernet switch. With 8 RJ-45 Gigabit LAN ports, it's ideal for adding network ports to a Dray Tek Vigor router. The enterprise-level features allow your business to improve network stability & security.\n\n The Vigor Switch P2100 is able to power your network devices via Power over Ethernet, with a generous 140 watt power budget to provide power to each of its 8 Po E / Po E+ enabled Gigabit LAN ports.\n\n The Vigor Switch P2100 works superbly in standalone mode, but designed for centralised management, it can be provisioned & monitored by one of Dray Tek&153;s central management platforms. These include the Vigor ACS management platform, Vigor Connect on-site management & Dray Tek&153;s router-based switch management These platforms allow you to drastically reduce the setup time required for a complex network & configure an entire Dray Tek network remotely.\n\n\n\n\n\n\n\n Power over Ethernet\n\n\n\n\n The Vigor Switch P2100 is an 8-port Po E (Power over Ethernet) switch, providing power on all ports to any Po E-enabled device, such as IP phones, wireless access points or IP cameras over the Ethernet cable. There are 2 additional SFP module slots for Ethernet & Fibre uplinks, with suitable SFP modules installed.\n\n As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down & remote rebooting.\n\n Power is provided only when required & allows for installation of devices where there is no mains power, particularly useful for wireless access points such as the ceiling-mounted Vigor AP 960C.\n\n The Vigor Switch P2100 has a total power budget of up to 140 watts for all connected Po E devices, allowing for connection of both standard Po E (802.3af) & High-Power Po E (802.3at) devices at up to 30 watts per port.\n\n\n\n\n Vigor Switch P2100\n\n\n\n Product Code\n EAN\n Product Name\n Description\n\n\n\n\n VSP2100-K\n 4710484742896\n Vigor Switch P2100 (UK/IE)\n 8-port Gigabit L2+ Managed Po E+ switch with 2 SFP Uplink ports\n\n\n\n Key Specifications\n\n 8 x RJ-45 Gigabit Ethernet Ports with Po E+\n 140-watt Power-over-Ethernet budget for demanding applications\n Cloud Managed with Vigor ACS\n 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN\n ONVIF IP Camera Surveillance Management with Po E Device Check\n Access Control List (ACL) for port & traffic level security\n Port Mirroring & Link Aggregation\n IGMP Snooping & Querying\n IPv 4 & IPv 6 Support with IP Conflict Prevention\n Centrally managed or standalone operation\n\n\n\n\n Technical

Specification (UK Hardware Spec.)\n Physical Interfaces\n\n 8 RJ-45 Ethernet Ports " 10/100/1000 Mbps\n 2 SFP Ports " 1000 Mbps\n Console Port (RJ-45 physical, RS-232 electrical)\n Factory Reset Button\n\n Po E Specification\n\n 8 Power over Ethernet LAN ports
- Po E PSE Mode A\n IEEE 802.3af Po E & 802.3at Po E+ (High Power) compliant\n 140 Watts Total Power Budget for Po E\n Up to 30 watts per port\n Auto Detection of Powered Device (PD) & Consumption Levels\n Per Port Po E Status LED Indicators\n Alert LED & Mail Alert for high Po E Usage\n Port Power Consumption Monitoring via Web Interface & CLI\n Circuit Protection to Prevent Power Interference between Ports\n Po E PD Monitoring & Maintenance Features (per port)\n\n Scheduling\n Po E PD Priority\n Restart Po E PD if not responding to ping\n Restart Po E IP Camera if not providing camera output\n\n\n\n VLAN\n\n 802.1q Tag-based VLAN\n Port-based & MAC-based VLANs\n Qin Q (Basic)\n GVRP " General VLAN Registration Protocol\n Up to 256 VLANs (out of 4096 VLAN IDs)\n 802.1v Protocol-Based VLAN\n Voice VLAN (OUI Mode)\n Surveillance VLAN (OUI Mode)\n Protocol VLAN\n MAC-based VLAN\n Management VLAN\n Port Isolation\n\n Qo S (Quality of Service)\n\n Support 8 priority queues\n Port-Based rate control (Ingress & Egress)\n Priority queue schedule (WRR or Strict Priority)\n Rate Limit\n Class of Service\n\n 802.1p Co S\n DSCP\n Co S-DSCP\n IP Precedence To S\n\n\n\n Network Security\n\n IP Source Guard with ARP inspection\n Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)\n Do S Attack protection\n AAA Authentication\n MAC Authentication\n Protected Port / Port Isolation\n Static Port Security\n Dynamic ARP Inspection\n DHCP Snooping with Option 82\n Loop Detection & Prevention\n Access Control Lists (ACL)\n\n Up to 512 ACL Entries\n Source & destination MAC\n VLAN ID\n IPv 4/v 6 address\n Protocol\n TCP/UDP port\n\n\n\n Spanning Tree\n\n Spanning Tree Protocol (STP)\n Rapid Spanning Tree Protocol (RSTP)\n Multiple Spanning Tree Protocol (MSTP)\n\n Link Aggregation\n\n Combine multiple ports to increase bandwidth\n 8 Aggregation Groups\n Up to 8 ports in each group\n LACP or Static setup\n Supports traffic load balancing\n\n Networking Performance\n\n Switching Capacity: 20 Gbps\n Forwarding Rate: 14.88 Mpps (64 bytes)\n Jumbo Frames up to 9KB\n Packet Buffer

Size: 4.1 Mbit\n\n Multicast\n\n Up to 256 multicast groups\n Multicast Group Filtering / Throttling\n IGMP Snooping V2/V3 (BISS)\n IGMP V2/V3 Querier\n Multicast VLAN registration\n MLD Snooping V1/V2\n\n Immediate Leave\n Report Suppression\n IGMP/MLD Querier\n\n\n\n AAA (Authentication, Authorisation, Accounting)\n\n RADIUS / TACACS+ Authentication for Management\n Multiple AAA Server\n MAC / Inaccessible Authentication bypass\n RADIUS Authentication 802.1X\n\n Accounting\n Guest VLAN\n Port based Authorisation\n\n 802.1X Single/ Multi\n MAC-based\n Web-based\n\n\n Attribute Assignment\n\n User Privilege\n VLAN\n\n\n\n\n TACACS+ Authentication\n\n Port Authorisation\n Accounting\n\n\n\n ONVIF Surveillance Management\n\n Discovery of ONVIF-compliant IP Cameras\n Surveillance Topology\n Real-Time Video Streaming\n ONVIF Device Maintenance\n\n Device Information\n Network Settings Configuration\n Time Settings\n Reboot\n Reset to Factory Default Settings\n Ping Check with Mail Alert on disconnection\n\n\n\n Management\n\n Central Management\n\n Vigor ACS\n Vigor Connect\n Vigor Router Switch Management (requires router firmware support)\n\n\n IPv 4 & IPv 6 Dual-Stack\n LLDP (802.1ab) + MED\n Web User Interface (HTTP or HTTPS)\n Firmware Upgrade/ Backup by HTTP/HTTPS\n HTTP (Non-TLS) can be disabled for increased security\n Configuration Backup/ Restore\n Factory Default\n System Reboot\n Command Line Interface (CLI) via SSH/ Telnet\n Console Port (RJ45) for CLI management\n Open VPN Client with Certificate-based auth\n SNMP v 1, v 2c, v 3 (with Generic Traps)\n RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)\n SNTP (Simple Network Time Protocol)\n\n Diagnostics\n\n Port Status & Usage display\n CPU/RAM Usage display\n MAC Address Table\n Device Check\n Syslog\n Mail Alert\n\n Port Status\n Port Speed Change\n System Restart\n Device Check\n IP Conflict\n ONVIF IP Camera Snapshot\n\n\n Port Mirroring\n Ping Diagnostics\n Port-based Cable Test\n\n Layer 3 Networking Features\n\n Static Route\n VLAN Routing\n DHCP Server (from firmware 2.6.8)\n\n I Pv 4 Features\n\n DHCP Client\n DNS Client\n DHCP Server (from firmware 2.6.8)\n\n Up to 8 subnets\n Option 82, 66, 67\n DHCP Snooping\n DHCP IP Source Guard\n\n\n\n I Pv 6 Features\n\n Auto Configuration\n Static IPv 6 Address & Prefix Length\n Static IPv 6 Default Gateway\n IPv 6 Neighbour Discovery (ND)\n IPv 6 Duplicate Address Detection\n ICMPv 6\n DHCPv 6 Client\n\n General IEEE Standards Compliance\n\n 802.3af Po E\n 802.3at Po E+\n 802.3 10 Base-T\n 802.3u 100 Base-T\n 802.3ab 1000 Base-T\n 802.3x Flow Control\n 802.3 Auto-Negotiation\n 802.1q Tag-based VLAN\n 802.1p Class of Service\n 802.1d STP\n 802.1w RSTP\n 802.1s MSTP\n 802.3ad LACP\n 802.1ad Qin Q\n 802.1x Port Access Control\n 802.1AB LLDP\n 802.3az EEE\n\n Operating Requirements\n\n Power Input Requirements: 100-240VAC\n Power supply: Internal\n Maximum Input Power Consumption: 164.3 Watts\n Cooling: Passively cooled\n Operating Temperature: 0 &176;C to 50 &176;C\n Storage Temperature: -20 &176;C to 70 &176;C\n Operating Humidity: 5% to 90% RH (non-condensing)\n\n Physical Specifications\n\n Dimensions: 319 x 208 x 44 mm (W x D x H)\n Rack mountable: 1U\n Weight: 2.61kg (5lb)\n\n Box Contents\n\n Vigor Switch P2100 Network Switch\n UK IEC13 Power Cable\n 1U Rack Mount Fittings\n Quick Start Guide\n\n ROHS & CE Compliant\n Warranty\n\n Two (2) Year Manufacturer's RTB\n\n\n\n\n\n\n




...
Available
VSP2100-K 8-Port Gigabit Layer 2+ Managed PoE+ Switch with 2 SFP Uplink Ports
VSP2100-K 8-Port
Gigabit Layer 2+
Managed Po E+ Switch
With 2 SFP Uplink
Ports
£136.47
Vigor Switch P2100\n 8-Port Gigabit Layer 2+ Managed Po E+ Switch with 2 SFP Uplink Ports\n The Vigor Switch P2100 is a high-performance, Layer 2+ Managed Ethernet switch. With 8 RJ-45 Gigabit LAN ports, it's ideal for adding network ports to a Dray Tek Vigor router. The enterprise-level features allow your business to improve network stability & security.\n\n The Vigor Switch P2100 is able to power your network devices via Power over Ethernet, with a generous 140 watt power budget to provide power to each of its 8 Po E / Po E+ enabled Gigabit LAN ports.\n\n The Vigor Switch P2100 works superbly in standalone mode, but designed for centralised management, it can be provisioned & monitored by one of Dray Tek&153;s central management platforms. These include the Vigor ACS management platform, Vigor Connect on-site management & Dray Tek&153;s router-based switch management These platforms allow you to drastically reduce the setup time required for a complex network & configure an entire Dray Tek network remotely.\n\n\n\n\n\n\n\n Power over Ethernet\n\n\n\n\n The Vigor Switch P2100 is an 8-port Po E (Power over Ethernet) switch, providing power on all ports to any Po E-enabled device, such as IP phones, wireless access points or IP cameras over the Ethernet cable. There are 2 additional SFP module slots for Ethernet & Fibre uplinks, with suitable SFP modules installed.\n\n As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down & remote rebooting.\n\n Power is provided only when required & allows for installation of devices where there is no mains power, particularly useful for wireless access points such as the ceiling-mounted Vigor AP 960C.\n\n The Vigor Switch P2100 has a total power budget of up to 140 watts for all connected Po E devices, allowing for connection of both standard Po E (802.3af) & High-Power Po E (802.3at) devices at up to 30 watts per port.\n\n\n\n\n Vigor Switch P2100\n\n\n\n Product Code\n EAN\n Product Name\n Description\n\n\n\n\n VSP2100-K\n 4710484742896\n Vigor Switch P2100 (UK/IE)\n 8-port Gigabit L2+ Managed Po E+ switch with 2 SFP Uplink ports\n\n\n\n Key Specifications\n\n 8 x RJ-45 Gigabit Ethernet Ports with Po E+\n 140-watt Power-over-Ethernet budget for demanding applications\n Cloud Managed with Vigor ACS\n 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN\n ONVIF IP Camera Surveillance Management with Po E Device Check\n Access Control List (ACL) for port & traffic level security\n Port Mirroring & Link Aggregation\n IGMP Snooping & Querying\n IPv 4 & IPv 6 Support with IP Conflict Prevention\n Centrally managed or standalone operation\n\n\n\n\n Technical

Specification (UK Hardware Spec.)\n Physical Interfaces\n\n 8 RJ-45 Ethernet Ports " 10/100/1000 Mbps\n 2 SFP Ports " 1000 Mbps\n Console Port (RJ-45 physical, RS-232 electrical)\n Factory Reset Button\n\n Po E Specification\n\n 8 Power over Ethernet LAN ports
- Po E PSE Mode A\n IEEE 802.3af Po E & 802.3at Po E+ (High Power) compliant\n 140 Watts Total Power Budget for Po E\n Up to 30 watts per port\n Auto Detection of Powered Device (PD) & Consumption Levels\n Per Port Po E Status LED Indicators\n Alert LED & Mail Alert for high Po E Usage\n Port Power Consumption Monitoring via Web Interface & CLI\n Circuit Protection to Prevent Power Interference between Ports\n Po E PD Monitoring & Maintenance Features (per port)\n\n Scheduling\n Po E PD Priority\n Restart Po E PD if not responding to ping\n Restart Po E IP Camera if not providing camera output\n\n\n\n VLAN\n\n 802.1q Tag-based VLAN\n Port-based & MAC-based VLANs\n Qin Q (Basic)\n GVRP " General VLAN Registration Protocol\n Up to 256 VLANs (out of 4096 VLAN IDs)\n 802.1v Protocol-Based VLAN\n Voice VLAN (OUI Mode)\n Surveillance VLAN (OUI Mode)\n Protocol VLAN\n MAC-based VLAN\n Management VLAN\n Port Isolation\n\n Qo S (Quality of Service)\n\n Support 8 priority queues\n Port-Based rate control (Ingress & Egress)\n Priority queue schedule (WRR or Strict Priority)\n Rate Limit\n Class of Service\n\n 802.1p Co S\n DSCP\n Co S-DSCP\n IP Precedence To S\n\n\n\n Network Security\n\n IP Source Guard with ARP inspection\n Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)\n Do S Attack protection\n AAA Authentication\n MAC Authentication\n Protected Port / Port Isolation\n Static Port Security\n Dynamic ARP Inspection\n DHCP Snooping with Option 82\n Loop Detection & Prevention\n Access Control Lists (ACL)\n\n Up to 512 ACL Entries\n Source & destination MAC\n VLAN ID\n IPv 4/v 6 address\n Protocol\n TCP/UDP port\n\n\n\n Spanning Tree\n\n Spanning Tree Protocol (STP)\n Rapid Spanning Tree Protocol (RSTP)\n Multiple Spanning Tree Protocol (MSTP)\n\n Link Aggregation\n\n Combine multiple ports to increase bandwidth\n 8 Aggregation Groups\n Up to 8 ports in each group\n LACP or Static setup\n Supports traffic load balancing\n\n Networking Performance\n\n Switching Capacity: 20 Gbps\n Forwarding Rate: 14.88 Mpps (64 bytes)\n Jumbo Frames up to 9KB\n Packet Buffer

Size: 4.1 Mbit\n\n Multicast\n\n Up to 256 multicast groups\n Multicast Group Filtering / Throttling\n IGMP Snooping V2/V3 (BISS)\n IGMP V2/V3 Querier\n Multicast VLAN registration\n MLD Snooping V1/V2\n\n Immediate Leave\n Report Suppression\n IGMP/MLD Querier\n\n\n\n AAA (Authentication, Authorisation, Accounting)\n\n RADIUS / TACACS+ Authentication for Management\n Multiple AAA Server\n MAC / Inaccessible Authentication bypass\n RADIUS Authentication 802.1X\n\n Accounting\n Guest VLAN\n Port based Authorisation\n\n 802.1X Single/ Multi\n MAC-based\n Web-based\n\n\n Attribute Assignment\n\n User Privilege\n VLAN\n\n\n\n\n TACACS+ Authentication\n\n Port Authorisation\n Accounting\n\n\n\n ONVIF Surveillance Management\n\n Discovery of ONVIF-compliant IP Cameras\n Surveillance Topology\n Real-Time Video Streaming\n ONVIF Device Maintenance\n\n Device Information\n Network Settings Configuration\n Time Settings\n Reboot\n Reset to Factory Default Settings\n Ping Check with Mail Alert on disconnection\n\n\n\n Management\n\n Central Management\n\n Vigor ACS\n Vigor Connect\n Vigor Router Switch Management (requires router firmware support)\n\n\n IPv 4 & IPv 6 Dual-Stack\n LLDP (802.1ab) + MED\n Web User Interface (HTTP or HTTPS)\n Firmware Upgrade/ Backup by HTTP/HTTPS\n HTTP (Non-TLS) can be disabled for increased security\n Configuration Backup/ Restore\n Factory Default\n System Reboot\n Command Line Interface (CLI) via SSH/ Telnet\n Console Port (RJ45) for CLI management\n Open VPN Client with Certificate-based auth\n SNMP v 1, v 2c, v 3 (with Generic Traps)\n RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)\n SNTP (Simple Network Time Protocol)\n\n Diagnostics\n\n Port Status & Usage display\n CPU/RAM Usage display\n MAC Address Table\n Device Check\n Syslog\n Mail Alert\n\n Port Status\n Port Speed Change\n System Restart\n Device Check\n IP Conflict\n ONVIF IP Camera Snapshot\n\n\n Port Mirroring\n Ping Diagnostics\n Port-based Cable Test\n\n Layer 3 Networking Features\n\n Static Route\n VLAN Routing\n DHCP Server (from firmware 2.6.8)\n\n I Pv 4 Features\n\n DHCP Client\n DNS Client\n DHCP Server (from firmware 2.6.8)\n\n Up to 8 subnets\n Option 82, 66, 67\n DHCP Snooping\n DHCP IP Source Guard\n\n\n\n I Pv 6 Features\n\n Auto Configuration\n Static IPv 6 Address & Prefix Length\n Static IPv 6 Default Gateway\n IPv 6 Neighbour Discovery (ND)\n IPv 6 Duplicate Address Detection\n ICMPv 6\n DHCPv 6 Client\n\n General IEEE Standards Compliance\n\n 802.3af Po E\n 802.3at Po E+\n 802.3 10 Base-T\n 802.3u 100 Base-T\n 802.3ab 1000 Base-T\n 802.3x Flow Control\n 802.3 Auto-Negotiation\n 802.1q Tag-based VLAN\n 802.1p Class of Service\n 802.1d STP\n 802.1w RSTP\n 802.1s MSTP\n 802.3ad LACP\n 802.1ad Qin Q\n 802.1x Port Access Control\n 802.1AB LLDP\n 802.3az EEE\n\n Operating Requirements\n\n Power Input Requirements: 100-240VAC\n Power supply: Internal\n Maximum Input Power Consumption: 164.3 Watts\n Cooling: Passively cooled\n Operating Temperature: 0 &176;C to 50 &176;C\n Storage Temperature: -20 &176;C to 70 &176;C\n Operating Humidity: 5% to 90% RH (non-condensing)\n\n Physical Specifications\n\n Dimensions: 319 x 208 x 44 mm (W x D x H)\n Rack mountable: 1U\n Weight: 2.61kg (5lb)\n\n Box Contents\n\n Vigor Switch P2100 Network Switch\n UK IEC13 Power Cable\n 1U Rack Mount Fittings\n Quick Start Guide\n\n ROHS & CE Compliant\n Warranty\n\n Two (2) Year Manufacturer's RTB\n\n\n\n\n\n\n




...
Available
VSP2100-K 8-Port Gigabit Layer 2+ Managed PoE+ Switch with 2 SFP Uplink Ports
VSP2100-K 8-Port
Gigabit Layer 2+
Managed Po E+ Switch
With 2 SFP Uplink
Ports
£136.47
Vigor Switch P2100\n 8-Port Gigabit Layer 2+ Managed Po E+ Switch with 2 SFP Uplink Ports\n The Vigor Switch P2100 is a high-performance, Layer 2+ Managed Ethernet switch. With 8 RJ-45 Gigabit LAN ports, it's ideal for adding network ports to a Dray Tek Vigor router. The enterprise-level features allow your business to improve network stability & security.\n\n The Vigor Switch P2100 is able to power your network devices via Power over Ethernet, with a generous 140 watt power budget to provide power to each of its 8 Po E / Po E+ enabled Gigabit LAN ports.\n\n The Vigor Switch P2100 works superbly in standalone mode, but designed for centralised management, it can be provisioned & monitored by one of Dray Tek&153;s central management platforms. These include the Vigor ACS management platform, Vigor Connect on-site management & Dray Tek&153;s router-based switch management These platforms allow you to drastically reduce the setup time required for a complex network & configure an entire Dray Tek network remotely.\n\n\n\n\n\n\n\n Power over Ethernet\n\n\n\n\n The Vigor Switch P2100 is an 8-port Po E (Power over Ethernet) switch, providing power on all ports to any Po E-enabled device, such as IP phones, wireless access points or IP cameras over the Ethernet cable. There are 2 additional SFP module slots for Ethernet & Fibre uplinks, with suitable SFP modules installed.\n\n As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down & remote rebooting.\n\n Power is provided only when required & allows for installation of devices where there is no mains power, particularly useful for wireless access points such as the ceiling-mounted Vigor AP 960C.\n\n The Vigor Switch P2100 has a total power budget of up to 140 watts for all connected Po E devices, allowing for connection of both standard Po E (802.3af) & High-Power Po E (802.3at) devices at up to 30 watts per port.\n\n\n\n\n Vigor Switch P2100\n\n\n\n Product Code\n EAN\n Product Name\n Description\n\n\n\n\n VSP2100-K\n 4710484742896\n Vigor Switch P2100 (UK/IE)\n 8-port Gigabit L2+ Managed Po E+ switch with 2 SFP Uplink ports\n\n\n\n Key Specifications\n\n 8 x RJ-45 Gigabit Ethernet Ports with Po E+\n 140-watt Power-over-Ethernet budget for demanding applications\n Cloud Managed with Vigor ACS\n 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN\n ONVIF IP Camera Surveillance Management with Po E Device Check\n Access Control List (ACL) for port & traffic level security\n Port Mirroring & Link Aggregation\n IGMP Snooping & Querying\n IPv 4 & IPv 6 Support with IP Conflict Prevention\n Centrally managed or standalone operation\n\n\n\n\n Technical

Specification (UK Hardware Spec.)\n Physical Interfaces\n\n 8 RJ-45 Ethernet Ports " 10/100/1000 Mbps\n 2 SFP Ports " 1000 Mbps\n Console Port (RJ-45 physical, RS-232 electrical)\n Factory Reset Button\n\n Po E Specification\n\n 8 Power over Ethernet LAN ports
- Po E PSE Mode A\n IEEE 802.3af Po E & 802.3at Po E+ (High Power) compliant\n 140 Watts Total Power Budget for Po E\n Up to 30 watts per port\n Auto Detection of Powered Device (PD) & Consumption Levels\n Per Port Po E Status LED Indicators\n Alert LED & Mail Alert for high Po E Usage\n Port Power Consumption Monitoring via Web Interface & CLI\n Circuit Protection to Prevent Power Interference between Ports\n Po E PD Monitoring & Maintenance Features (per port)\n\n Scheduling\n Po E PD Priority\n Restart Po E PD if not responding to ping\n Restart Po E IP Camera if not providing camera output\n\n\n\n VLAN\n\n 802.1q Tag-based VLAN\n Port-based & MAC-based VLANs\n Qin Q (Basic)\n GVRP " General VLAN Registration Protocol\n Up to 256 VLANs (out of 4096 VLAN IDs)\n 802.1v Protocol-Based VLAN\n Voice VLAN (OUI Mode)\n Surveillance VLAN (OUI Mode)\n Protocol VLAN\n MAC-based VLAN\n Management VLAN\n Port Isolation\n\n Qo S (Quality of Service)\n\n Support 8 priority queues\n Port-Based rate control (Ingress & Egress)\n Priority queue schedule (WRR or Strict Priority)\n Rate Limit\n Class of Service\n\n 802.1p Co S\n DSCP\n Co S-DSCP\n IP Precedence To S\n\n\n\n Network Security\n\n IP Source Guard with ARP inspection\n Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)\n Do S Attack protection\n AAA Authentication\n MAC Authentication\n Protected Port / Port Isolation\n Static Port Security\n Dynamic ARP Inspection\n DHCP Snooping with Option 82\n Loop Detection & Prevention\n Access Control Lists (ACL)\n\n Up to 512 ACL Entries\n Source & destination MAC\n VLAN ID\n IPv 4/v 6 address\n Protocol\n TCP/UDP port\n\n\n\n Spanning Tree\n\n Spanning Tree Protocol (STP)\n Rapid Spanning Tree Protocol (RSTP)\n Multiple Spanning Tree Protocol (MSTP)\n\n Link Aggregation\n\n Combine multiple ports to increase bandwidth\n 8 Aggregation Groups\n Up to 8 ports in each group\n LACP or Static setup\n Supports traffic load balancing\n\n Networking Performance\n\n Switching Capacity: 20 Gbps\n Forwarding Rate: 14.88 Mpps (64 bytes)\n Jumbo Frames up to 9KB\n Packet Buffer

Size: 4.1 Mbit\n\n Multicast\n\n Up to 256 multicast groups\n Multicast Group Filtering / Throttling\n IGMP Snooping V2/V3 (BISS)\n IGMP V2/V3 Querier\n Multicast VLAN registration\n MLD Snooping V1/V2\n\n Immediate Leave\n Report Suppression\n IGMP/MLD Querier\n\n\n\n AAA (Authentication, Authorisation, Accounting)\n\n RADIUS / TACACS+ Authentication for Management\n Multiple AAA Server\n MAC / Inaccessible Authentication bypass\n RADIUS Authentication 802.1X\n\n Accounting\n Guest VLAN\n Port based Authorisation\n\n 802.1X Single/ Multi\n MAC-based\n Web-based\n\n\n Attribute Assignment\n\n User Privilege\n VLAN\n\n\n\n\n TACACS+ Authentication\n\n Port Authorisation\n Accounting\n\n\n\n ONVIF Surveillance Management\n\n Discovery of ONVIF-compliant IP Cameras\n Surveillance Topology\n Real-Time Video Streaming\n ONVIF Device Maintenance\n\n Device Information\n Network Settings Configuration\n Time Settings\n Reboot\n Reset to Factory Default Settings\n Ping Check with Mail Alert on disconnection\n\n\n\n Management\n\n Central Management\n\n Vigor ACS\n Vigor Connect\n Vigor Router Switch Management (requires router firmware support)\n\n\n IPv 4 & IPv 6 Dual-Stack\n LLDP (802.1ab) + MED\n Web User Interface (HTTP or HTTPS)\n Firmware Upgrade/ Backup by HTTP/HTTPS\n HTTP (Non-TLS) can be disabled for increased security\n Configuration Backup/ Restore\n Factory Default\n System Reboot\n Command Line Interface (CLI) via SSH/ Telnet\n Console Port (RJ45) for CLI management\n Open VPN Client with Certificate-based auth\n SNMP v 1, v 2c, v 3 (with Generic Traps)\n RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)\n SNTP (Simple Network Time Protocol)\n\n Diagnostics\n\n Port Status & Usage display\n CPU/RAM Usage display\n MAC Address Table\n Device Check\n Syslog\n Mail Alert\n\n Port Status\n Port Speed Change\n System Restart\n Device Check\n IP Conflict\n ONVIF IP Camera Snapshot\n\n\n Port Mirroring\n Ping Diagnostics\n Port-based Cable Test\n\n Layer 3 Networking Features\n\n Static Route\n VLAN Routing\n DHCP Server (from firmware 2.6.8)\n\n I Pv 4 Features\n\n DHCP Client\n DNS Client\n DHCP Server (from firmware 2.6.8)\n\n Up to 8 subnets\n Option 82, 66, 67\n DHCP Snooping\n DHCP IP Source Guard\n\n\n\n I Pv 6 Features\n\n Auto Configuration\n Static IPv 6 Address & Prefix Length\n Static IPv 6 Default Gateway\n IPv 6 Neighbour Discovery (ND)\n IPv 6 Duplicate Address Detection\n ICMPv 6\n DHCPv 6 Client\n\n General IEEE Standards Compliance\n\n 802.3af Po E\n 802.3at Po E+\n 802.3 10 Base-T\n 802.3u 100 Base-T\n 802.3ab 1000 Base-T\n 802.3x Flow Control\n 802.3 Auto-Negotiation\n 802.1q Tag-based VLAN\n 802.1p Class of Service\n 802.1d STP\n 802.1w RSTP\n 802.1s MSTP\n 802.3ad LACP\n 802.1ad Qin Q\n 802.1x Port Access Control\n 802.1AB LLDP\n 802.3az EEE\n\n Operating Requirements\n\n Power Input Requirements: 100-240VAC\n Power supply: Internal\n Maximum Input Power Consumption: 164.3 Watts\n Cooling: Passively cooled\n Operating Temperature: 0 &176;C to 50 &176;C\n Storage Temperature: -20 &176;C to 70 &176;C\n Operating Humidity: 5% to 90% RH (non-condensing)\n\n Physical Specifications\n\n Dimensions: 319 x 208 x 44 mm (W x D x H)\n Rack mountable: 1U\n Weight: 2.61kg (5lb)\n\n Box Contents\n\n Vigor Switch P2100 Network Switch\n UK IEC13 Power Cable\n 1U Rack Mount Fittings\n Quick Start Guide\n\n ROHS & CE Compliant\n Warranty\n\n Two (2) Year Manufacturer's RTB\n\n\n\n\n\n\n




...
Available
V1200P &pipe; COLORMETRICS
V1200P &pipe;
COLORMETRICS
£1016.92
Product Family: Colormetrics V1200\n\n Datasheet: https://www.jarltech.com/ger_new/new/pdf/en/color_V1200.pdf\n\n Warranty: 36 Months ...
Available
V1200P &pipe; COLORMETRICS
V1200P &pipe;
COLORMETRICS
£1016.92
Product Family: Colormetrics V1200\n\n Datasheet: https://www.jarltech.com/ger_new/new/pdf/en/color_V1200.pdf\n\n Warranty: 36 Months ...
Available

VSK-10

Value Solution Series - VSK 10\nHighly Functional Micro-ATX Case\n\nGet the Second Ones, Have Better Cooling\nStrong Case Fan Support\n- Up to mount 2 x 140 mm fans both on the top and in the front.\n\nSuperior Radiator Space\nSupports up to 280 mm radiator in the front without any obstacle.\n\nAll-Dimension Airflow Path\nAir intakes in the front, on the right and left, and at the bottom ensures more airflow.\n\nFeatures\n- Front air intake with minimalism style\n- Magnetic dust filter on the top\n- Stylish case feet\n- Removable dust filter at the bottom\n- 2 x 3.5" removable drive racks (compatible with 2.5" SSDs)\n\nForm Factor\nMicro Tower\n\nMotherboard Support\nMicro ATX\nMini-ITX\n\nMaterials\nSPCC + Plastic\n\nI/O Panel\n2 x USB 3.0\nHD
Mic/Audio\nPower\nReset\n\nExpansion\nSlots: 4\n\nDrive Bays\n5.25": 0\n3.5"/2.5" Combo: 2\n2.5": 2\n\nCooling Support\nFront: 3 x 120mm / 2 x 140mm\nTop: 2 x 120mm / 2 x 140mm\nRear: 1 x 120mm (1 x 120mm fan included)\n\nRadiator Support\nFront: < 280mm (Up to 55mm thickness with fan)\nRear: < 120mm\n\nClearance\nMax GPU Length: 350mm\nMax CPU Cooler Height: 160mm\nMax PSU Length: 160mm\n\nDust Filters\nTop\nBottom\n\nDimensions (D x W x H )\n405 x 205 x 400 mm\n\nWeight\nNet: 3.98 Kgs\nGross: 4.82 Kgs\n\n\n\n\n\n\n\nDatasheet: https://uk.ingrammicro.eu/cfs/Icecat/PDF.aspxs=20346540&l=en\n\n
Buy
Availability: In Stock
£42.16
components>computer cases
Description Reviews / Comments Add New

Product Description

Value Solution Series
- VSK 10\n Highly Functional Micro-ATX Case\n\n Get the Second Ones, Have Better Cooling\n Strong Case Fan Support\n- Up to mount 2 x 140 mm fans both on the top & in the front.\n\n Superior Radiator Space\n Supports up to 280 mm radiator in the front without any obstacle.\n\n All-Dimension Airflow Path\n Air intakes in the front, on the right & left, & at the bottom ensures more airflow.\n\n Features\n- Front air intake with minimalism style\n- Magnetic dust filter on the top\n- Stylish case feet\n- Removable dust filter at the bottom\n- 2 x 3.5" removable drive racks (compatible with 2.5" SSDs)\n\n Form Factor\n Micro Tower\n\n Motherboard Support\n Micro ATX\n Mini-ITX\n\n Materials\n SPCC + Plastic\n\n I/O Panel\n 2 x USB (Universal Serial Bus) 3.0\n HD Mic/ Audio\n Power\n Reset\n\n Expansion\n Slots: 4\n\n Drive Bays\n 5.25": 0\n 3.5"/2.5" Combo: 2\n 2.5": 2\n\n Cooling Support\n Front: 3 x 120mm / 2 x 140mm\n Top: 2 x 120mm / 2 x 140mm\n Rear: 1 x 120mm (1 x 120mm fan included)\n\n Radiator Support\n Front: < 280mm (Up to 55mm thickness with fan)\n Rear: < 120mm\n\n Clearance\n Max GPU Length: 350mm\n Max CPU Cooler

Height: 160mm\n Max PSU Length: 160mm\n\n Dust Filters\n Top\n Bottom\n\n Dimensions (D x W x H )\n 405 x 205 x 400 mm\n\n Weight\n Net: 3.98 Kgs\n Gross: 4.82 Kgs\n\n\n\n\n\n\n\n Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=20346540&l=en\n\n

Reviews/Comments

Add New

Intelligent Comparison

Available
VSK-10
VSK-10 Transparent Communications
£42.16

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer
Plastic - A generic term for a synthetic product used in the manufacture of products
UK - United Kingdom - An island nation in Europe
Filter - A device used to separate mixtures
Filter - An optical device to remove or enhance particular wavelengths of light.
magnetic - A susbstance affected at a microscopic level by an applied magnetic field.
Stylish - A desirable design or layout
Dust - A general term used for micro particles in the atmosphere
Mic - Short for microphone. Used for recording sounds.
Audio - Also known as sound. An audible vibration wave which can be heard.
USB - Universal Serial Bus. A method of connecting a device to a computer
Radiator - A household item that warms a room.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Dimension - The shape or measurements of something.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu