More From Contributor

£35.46
\n TP-LINK TL-SG1008 network switch Unmanaged\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG1008\n \n \n EAN:\n 6935364020019 9888185235506 0191120098838 3548383171308 5054242181039 6315487614188 0809186281797 0845973021573 8459730200198 0845973020019 0898029647708 0809385676646 0132018280270 5054814467257 7432349143163 0807030506072 0731215286490 0803982835352 6935364021573\n \n \n \n \n\n Description\n \n \n The TL-SG1008 is a high performance Smart Gigabit switch that provides an ideal solution for workgroup or department Gigabit applications. With 8 10/100/1000BASE-T Gigabit Ethernet ports with AUTO-MDIX provides full bandwidth (Maximum 2000 Mbps in full duplex mode). Easy-to-view LED indicators are supported for cable installation & normal operational diagnostics. The switch can be used a desktop or in a rack-mount.\n \n \n\n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TBasic switching RJ-45 Ethernet ports quantity 8 Weight & dimensions Dimensions (W x D x H) (imperial)248.9 x 157.5 x 43.2 mm (9.8 x 6.2 x 1.7") Power Input voltage 100
- 240 VManagement features Switch type Unmanaged Networking Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TFull duplex Yes Flow control support Yes Auto MDI/MDI-XYes Data transmission MAC address table 8000 entries Supported data transfer rates 10/100/1000 Mbps Store-&-forward Yes Maximum data transfer rate 1 Gbit/s Protocols Supported network protocols CSMA/CD, TCP/IPCertificates Certification FCC, CE, Ro HSDesign Certification FCC, CE, Ro HSPower over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)32
- 104 &176;FOperating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Other features Dimensions (Wx Dx H)294 x 180 x 44 mm Connectivity technology Wired Bandwidth 16 Gbit/s Networking features Gigabit Ethernet Input voltage 100
- 240 VInput frequency 50
- 60 Hz Connectivity LEDs Yes Dimensions (W x D x H) (imperial)248.9 x 157.5 x 43.2 mm (9.8 x 6.2 x 1.7")\n \n \n\n\n\n\n\n







...
Available
£40.34
\n TP-LINK TL-SG1008P network switch Gigabit Ethernet (10/100/1000) Grey Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG1008P\n \n \n EAN:\n 6935364021177 6935364021160 5055309620348 5054533474277 0797045613608 6817813021160 5053959161129 5055383466986 5054484474272 8459730211606 0115971150279\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n 8-Port Gigabit Desktop Switch with 4-Port Po E provides the seamless network connection. It integrates 1000 Mbps Gigabit Ethernet & 10/100 Mbps Fast Ethernet network capabilities.\n\n\n\n How This Product Works\n\n 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (Po E) function. These Po E ports can automatically detect & supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.\n\n\n\n Overload Arrangement\n\n TL-SG1008P has the priority function which will help protect the system when the system power is overloaded. If all Po E PDs power consumption is >= 53W, a priority will be arranged among the Po E ports, then the system will cut off the power of the lowest-priority port.\n\n\n\n Port Priority Function\n\n Priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 & 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (Po E max LED is red ). If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4w, & Port 3 will use 10w, & no power will be supplied to Port 4.\n\n\n\n Easy To Use\n\n TL-SG1008P is easy to install & use. It requires no configuration & installation. With desktop design, outstanding performance & quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port Po E is a great selection for expanding your home or office network.\n \n \n\n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TBasic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Power Power connector DC-in jack Power consumption (typical)53 WNumber of power supply units 1 Technical details Product colour Grey Rack mounting No Networking Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission MAC address table 8000 entries Switching capacity 16 Gbit/s Store-&-forward Yes Certificates Certification FCC, CEDesign Product colour Grey LED indicators Status Certification FCC, CERack mounting No Indication LED indicators Status Power over Ethernet (Po E) Power over Ethernet (Po E) ports quantity 4 Power over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 171 mm Depth 98 mm Height 27 mm Packaging data User guide Yes Packaging content User guide Yes\n \n \n\n\n\n\n\n



...
Available
£63.35
\n TP-LINK TL-SG1016DE network switch Managed L2 Gigabit Ethernet (10/100/1000) Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG1016DE\n \n \n EAN:\n 6935364021276 6935364021269 5052916666134 8459730212696 0845973021269 0803983008335 0846829883611 4054842253656 5055851144255 0803983008328 0898029674186 0907163844253 5054484511991 5999009362477 5425656672633 0863190005961 0682851734657 4056203090801 0809394432189\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n\n\n The TL-SG1016DE 16-Port Gigabit Easy Smart switch is an ideal upgrade from an unmanaged switch, designed for Small & Medium Business networks that require simple network management. Network administrators can effectively monitor traffic via Port Mirroring, Loop Prevention & Cable Diagnostics features. To optimize traffic on your business network, TL-SG1016DE offers both port & tag based Qo S to keep latency-sensitive traffic moving smoothly & jitter-free. in addition, port-based, tag-based & MTU VLAN can improve security & meet more network segmentation requirements. Moreover, with its innovative energy-efficient technology, the TL-SG1016DE can save up to 40% of power consumption, making it an eco-friendly solution for your business network.\n\n\n\n Simple & Effective Management\n\n\n\n TP-LINK&153;s Gigabit Easy Smart switch, TL-SG1016DE offers network monitoring for users to observe traffic behavior. With Port Mirroring, Loop Prevention & Cable Diagnostics features, TL-SG1016DE can identify & even locate connection problems on your business network. Moreover, administrators can designate the priority of the traffic based on Port Priority & 802.1P Priority, to ensure that voice & video are always clear, smooth & lag-free. in addition, to improve security & network performance, TL-SG1016DE supports MTU VLAN, port-based VLAN & 802.1Q-based VLAN functions. TL-SG1016DE is an upgrade from the plug-&-play Unmanaged Switch, delivering great value while empowering your network & similarly delivering great value to the end user.\n\n\n\n Go Green With Your Ethernet\n\n\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation of TL-SG1016DE 16-Port Gigabit Easy Smart Switch features the latest energy-efficient technologies that can greatly expand your network&153;s capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n Power down Idle Ports\n\n\n\n When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016DE can automatically detect the link status of each port & reduce the power consumption of ports that are idle.\n\n\n\n Power Budget According to Cable Length\n\n\n\n Ideally, shorter cables would use less power with less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG1016DE analyzes the length of the Ethernet cable connected & adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.\n\n\n\n Ease of Use\n\n\n\n TL-SG1016DE is easy to use & manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Its compact size makes it absolutely ideal for desktops with limited space while also being Rack-mountable, convenient & safe. Dynamic LED lights provide real-time work status display & basic fault diagnosis.\n \n \n\n Specifications\n \n Networking IGMP snooping Yes Networking standards IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x Full duplex Yes VLAN support Yes Rate limiting Yes Port mirroring Yes Number of VLANs 32 Link aggregation Yes Flow control support Yes Broadcast storm control Yes Auto MDI/MDI-XYes 10G support No Virtual LAN features VLAN support Yes Number of VLANs 32 Data transmission Number of VLANs 32 Throughput 23.8 Mpps Packet buffer memory 0.5 MBMAC address table 8000 entries Switching capacity 32 Gbit/s Store-&-forward Yes Number of queues 4 Jumbo frames support Yes Performance Packet buffer memory 0.5 MBCompatible operating systems Windows 98SE, NT, 2000, XP, Vista Windows 7, Windows 8, MAC OS, Net Ware, UNIX, Linux Technical details Product colour Black Rack mounting Yes Management features Switch type Managed Quality of Service (Qo S) support Yes Switch layer L2 Ports & interfaces Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Security IGMP snooping Yes Certificates Certification FCC, CE, Ro HSMemory Packet buffer memory 0.5 MBDesign Product colour Black LED indicators Yes Certification FCC, CE, Ro HSRack mounting Yes Indication LED indicators Yes System requirements Compatible operating systems Windows 98SE, NT, 2000, XP, Vista Windows 7, Windows 8, MAC OS, Net Ware, UNIX, Linux Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 294 mm Depth 180 mm Height 44 mm Packaging data User guide Yes Packaging content User guide Yes\n \n \n\n\n\n\n\n





...
Available
£14.85
\n TP-LINK TL-SG105 network switch Unmanaged Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG105\n \n \n EAN:\n 6935364021320 6935364021146 5055851134713 8459730211460 5055818251262 0634392925544 5054533230712 5053460935028 5053973983561 0761590227030 5053959234939\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n The TP-LINK 5-Port 10/100/1000 Mbps Desktop Switch provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality. Moreover, TL-SG105 adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG105 can save up to 65% of the power consumption, making it an eco-friendly solution for your home or office network.\n\n\n\n Gigabit Switch\n\n Featured with 5x 10/100/1000 Mbps ports, TL-SG105 greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.\n\n\n\n Go Green With Your Ethernet\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG105 5-Port 10/100/1000 Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n- Power down Idle Ports\n\n When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG105 can automatically detect the link status of each port & reduce the power consumption of ports that are idle, resulting in up to an 65% reduction in power use.\n\n- Power Budget According to Cable Length\n\n Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.\n \n \n\n Specifications\n \n Networking IGMP snooping Yes Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3x Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Multicast Listener Discovery (MLD) snooping Yes Supported data transfer rates 10/100/1000 Mbps Store-&-forward Yes Jumbo frames support Yes Maximum data transfer rate 2 Gbit/s Power Power connector DC-in jack AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Technical details Product colour Black Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Ports & interfaces Basic switching RJ-45 Ethernet ports quantity 5 Power connector DC-in jack Security IGMP snooping Yes Multicast features Multicast Listener Discovery (MLD) snooping Yes Protocols Switching protocols CSMA/CDCertificates Certification CE, FCC, Ro HSDesign Product colour Black LED indicators Yes Certification CE, FCC, Ro HSIndication Power LEDYes LED indicators Yes Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 99.8 mm Depth 98 mm Height 25 mm Packaging data User guide Yes Manual Yes Other features Connectivity technology Wired Wi-Fi No Power LEDYes Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet LANYes Packaging content User guide Yes Manual Yes\n \n \n\n\n\n\n\n





...
Available
£20.19
\n TP-LINK TL-SG105E network switch L2 Gigabit Ethernet (10/100/1000) Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG105E\n \n \n EAN:\n 6935364022044 6935364022037 8459730220370 5054629497074 0722550185579 0845973022037 5054533704497 4056203039466\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n\n\n The TL-SG105E 5-Port Gigabit Easy Smart switch is an ideal upgrade from an unmanaged switch, designed for Small & Medium Business networks that require simple network management. Network administrators can effectively monitor traffic via Port Mirroring, Loop Prevention & Cable Diagnostics features. To optimize traffic on your business network, TL-SG105E offers both port & tag based Qo S to keep latency-sensitive traffic moving smoothly & jitter-free. in addition, port-based, tag-based & MTU VLAN can improve security & meet more network segmentation requirements. Moreover, with its innovative energy-efficient technology, the TL-SG105E can save up to 75% of power consumption, making it an eco-friendly solution for your business network.\n\n\n\n Simple & Effective Management\n\n\n\n TP-LINK&153;s Gigabit Easy Smart switch, TL-SG105E offers network monitoring for users to observe traffic behavior. With Port Mirroring, Loop Prevention & Cable Diagnostics features, TL-SG105E can identify & even locate connection problems on your business network. Moreover, administrators can designate the priority of the traffic based on Port Priority & 802.1P Priority, to ensure that voice & video are always clear, smooth & lag-free. in addition, to improve security & network performance, TL-SG105E supports MTU VLAN, port-based VLAN & 802.1Q-based VLAN functions. TL-SG105E is an upgrade from the plug-&-play Unmanaged Switch, delivering great value while empowering your network & similarly delivering great value to the end user.\n\n\n\n Go Green with Your Ethernet\n\n\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation of TL-SG105E 5-Port Gigabit Easy Smart Switch features the latest energy-efficient technologies that can greatly expand your network&153;s capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n Power down Idle Ports\n\n\n\n When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG105E can automatically detect the link status of each port & reduce the power consumption of ports that are idle.\n\n Power Budget According to Cable Length\n\n\n\n Ideally, shorter cables would use less power with less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG105E analyzes the length of the Ethernet cable connected & adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.\n\n\n\n Ease of Use\n\n\n\n TL-SG105E is easy to use & manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Its compact size makes it absolutely ideal for desktops with limited space while also being Rack-mountable, convenient & safe. Dynamic LED lights provide real-time work status display & basic fault diagnosis.\n \n \n\n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 5 Networking IGMP snooping Yes Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TNetworking standards IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x VLAN support Yes Port mirroring Yes Number of VLANs 32 Link aggregation Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Virtual LAN features VLAN support Yes Number of VLANs 32 Data transmission Number of VLANs 32 Throughput 7.4 Mpps Packet buffer memory 250 MBMAC address table 8192 entries Store-&-forward Yes Jumbo frames support Yes Performance Packet buffer memory 250 MBCompatible operating systems Microsoft Windows XP, Vista Windows 7, Windows 8, MAC OS, Net Ware, UNIX / Linux Technical details Product colour Black Management features Web-based management Yes Quality of Service (Qo S) support Yes Switch layer L2 Security IGMP snooping Yes Certificates Certification FCC, CE, Ro HSMemory Packet buffer memory 250 MBDesign Product colour Black LED indicators Yes Certification FCC, CE, Ro HSIndication LED indicators Yes System requirements Compatible operating systems Microsoft Windows XP, Vista Windows 7, Windows 8, MAC OS, Net Ware, UNIX / Linux Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Packaging data Quick start guide Yes Packaging content Quick start guide Yes\n \n \n\n\n\n\n\n



...
Available
£42.27
The TL-SG105PE is an 5-port Gigabit Easy Smart Switch with 4 Po E+ ports, represents a powerful upgrade from an unmanaged switch. It is designed specially for small businesses that require simple network management & Po E function. The TL-SG105PE can connect & power up to four Po E devices, such as wireless access points (APs), IP cameras, & IP phones. Through its web-based user interface & management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, Po E Auto Recovery & enhanced Qo S. in addition, with port-based, tag-based & MTU VLAN, TL-SG105PE can improve security & meet more network segmentation requirements.nn Power Over Ethernetn 4 of the 5 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (Po E) function. These Po E ports can automatically detect & supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).nn Overload Arrangementn TL-SG105PE has the priority function which will help protect the system when the system power is overloaded. If all Po E PDs power consumption is >= 65 W, a priority will be arranged among the Po E ports, then the system will cut off the power of the lowest-priority port.nn Intelligent Power Managementn Priority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 & 4 are consuming 15.4 W respectively. If an additional Po E device with 20 W is inserted to port 3, the system will cut off the power of port 4 to compensate for the overload.nn Effective Managementn TL-SG105PE offers network monitoring for users to observe traffic behavior. Through its web-based user interface & management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, Po E Auto Recovery & enhanced Qo S.n With Port Mirroring, Loop Prevention & Cable Diagnostics features, TL-SG105PE can identify & even locate connection problems on your business network. Also, administrators can designate the priority of the traffic based on Port Priority, 802.1P Priority & DSCP Priority, to ensure that voice & video are always clear, smooth & lag-free.nin addition, to improve security & network performance, TL-SG105PE supports MTU VLAN, port-based VLAN & 802.1Q-based VLAN functions. Po E Auto Recovery automatically reboots your dropped or unresponsive Po E-powered devices.n TL-SG105PE is an upgrade from the plug-&-play Unmanaged Switch, delivering great value while empowering your network & similarly delivering great value to the end user.nn Easy to Usen TL-SG105PE is easy to use & manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Its compact size makes it absolutely ideal for desktops with limited space. Dynamic LED lights provide real-time work status display & basic fault diagnosis.\n\n\n\n Product ID: TL-SG105PE\n\n\n\n\n\n Model: TL-SG105PE\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80377889_1596625506_2553_30214.pdf\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_80377889_1596625538_9925_32294.pdf\n\n\n\n\n\n\n\n ...
Available
£12.70
\n TP-LINK TL-SG105S network switch Unmanaged L2 Gigabit Ethernet (10/100/1000) Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG105S\n \n \n EAN:\n 6935364095024 6935364083519\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n\n\n The TP-Link 5-Port 10/100/1000 Mbps Desktop Switch provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality. Plug & Play design, with no configuration required, makes the product easy to use. Moreover, TL-SG105S adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG105S can save power consumption, making it an eco-friendly solution for your home or office network.\n\n\n\n Gigabit Switch\n\n\n\n Featured with 5 10/100/1000 Mbps ports, TL-SG105S greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. \n\n\n\n Go Green With Your Ethernet\n\n\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG105S 5-Port 10/100/1000 Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n Traffic Optimization\n\n\n\n 802.1p & DSCP Qo S enable smooth latency-sensitive traffic such as voice & video, & IGMP Snooping optimizes the Multicast data stream. \n\n\n\n Easy to use\n\n\n\n The auto features of this gigabit switch make installation plug & play & hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Moreover, fanless design ensures quiet operation.\n\n\n\n- 5 10/100/1000 Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX\n\n- Green Ethernet technology saves power consumption\n\n- IEEE 802.3x flow control provides reliable data transfer\n\n- Steel housing, desktop or wall-mounting design\n\n- Support 802.1p/DSCP Qo S & IGMP Snooping function\n\n- Plug & play, no configuration needed\n \n \n\n Specifications\n \n Management features Multicast support Yes Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 5 Networking IGMP snooping Yes Cable types supported Cat 3, Cat 4, Cat 5, Cat 5e MAC address auto-learning supported Yes MAC address auto-aging supported Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Auto-negotiation Yes Performance Packet buffer memory 0.125 MBAuto-negotiation Yes Plug & Play Yes Technical details Product colour Black Housing material Steel Rack mounting No Data transmission Jumbo frames 16000 Packet buffer memory 0.125 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Store-&-forward Yes Jumbo frames support Yes Forwarding rate 7.4 Mpps Security IGMP snooping Yes Multicast features Multicast support Yes Certificates Certification CE, FCC, Ro HSMemory Packet buffer memory 0.125 MBDesign Wall mountable Yes Product colour Black LED indicators Yes Housing material Steel Certification CE, FCC, Ro HSRack mounting No Indication LED indicators Yes Power Power consumption (max)2.43 WOutput voltage 9 VOutput current 0.6 AAC input voltage 220 VAC input frequency 50 Hz Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 100 mm Depth 98 mm Height 25 mm Packaging data AC adapter included Yes Rubber feet Yes Quick start guide Yes Packaging content AC adapter included Yes Rubber feet Yes Quick start guide Yes\n \n \n\n\n\n\n\n



...
Available
£12.70
\n TP-LINK TL-SG105S network switch Unmanaged L2 Gigabit Ethernet (10/100/1000) Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG105S\n \n \n EAN:\n 6935364095024 6935364083519\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n\n\n The TP-Link 5-Port 10/100/1000 Mbps Desktop Switch provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality. Plug & Play design, with no configuration required, makes the product easy to use. Moreover, TL-SG105S adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG105S can save power consumption, making it an eco-friendly solution for your home or office network.\n\n\n\n Gigabit Switch\n\n\n\n Featured with 5 10/100/1000 Mbps ports, TL-SG105S greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. \n\n\n\n Go Green With Your Ethernet\n\n\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG105S 5-Port 10/100/1000 Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n Traffic Optimization\n\n\n\n 802.1p & DSCP Qo S enable smooth latency-sensitive traffic such as voice & video, & IGMP Snooping optimizes the Multicast data stream. \n\n\n\n Easy to use\n\n\n\n The auto features of this gigabit switch make installation plug & play & hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Moreover, fanless design ensures quiet operation.\n\n\n\n- 5 10/100/1000 Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX\n\n- Green Ethernet technology saves power consumption\n\n- IEEE 802.3x flow control provides reliable data transfer\n\n- Steel housing, desktop or wall-mounting design\n\n- Support 802.1p/DSCP Qo S & IGMP Snooping function\n\n- Plug & play, no configuration needed\n \n \n\n Specifications\n \n Management features Multicast support Yes Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 5 Networking IGMP snooping Yes Cable types supported Cat 3, Cat 4, Cat 5, Cat 5e MAC address auto-learning supported Yes MAC address auto-aging supported Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Auto-negotiation Yes Performance Packet buffer memory 0.125 MBAuto-negotiation Yes Plug & Play Yes Technical details Product colour Black Housing material Steel Rack mounting No Data transmission Jumbo frames 16000 Packet buffer memory 0.125 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Store-&-forward Yes Jumbo frames support Yes Forwarding rate 7.4 Mpps Security IGMP snooping Yes Multicast features Multicast support Yes Certificates Certification CE, FCC, Ro HSMemory Packet buffer memory 0.125 MBDesign Wall mountable Yes Product colour Black LED indicators Yes Housing material Steel Certification CE, FCC, Ro HSRack mounting No Indication LED indicators Yes Power Power consumption (max)2.43 WOutput voltage 9 VOutput current 0.6 AAC input voltage 220 VAC input frequency 50 Hz Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 100 mm Depth 98 mm Height 25 mm Packaging data AC adapter included Yes Rubber feet Yes Quick start guide Yes Packaging content AC adapter included Yes Rubber feet Yes Quick start guide Yes\n \n \n\n\n\n\n\n



...
Available
£17.42
\n TP-LINK TL-SG108 network switch Unmanaged Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG108\n \n \n EAN:\n 6935364021337 6935364021153 8592978086725 0785307930129 5054230491850 8459730211538 5053460935011 0164682528648 0872182784494 5052916688228\n \n \n \n \n\n Description\n \n \n What This Product Does\n\n The TP-LINK 8 10/100/1000 Mbps Desktop Switch TL-SG108 provides you an easy way to make the transition to gigabit Ethernet. Increase the speed of your network server & backbone connections, or make gigabit to the desktop a reality. Moreover, TL-SG108 adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG108 can save up to 72% of the power consumption, making it an eco-friendly solution for your home or office network.\n\n\n\n Gigabit Switch\n\n Featured with 8 10/100/1000 Mbps ports, TL-SG108 greatly expands your network capacity, enabling instant large files transferring. So&2&188;&140;power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.\n\n\n\n Go Green With Your Ethernet\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG108 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n- Power down Idle Ports\n\n When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG108 can automatically detect the link status of each port & reduce the power consumption of ports that are idle, resulting in up to an 72% reduction in power use.\n\n- Power Budget According to Cable Length\n\n Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.\n \n \n\n Specifications\n \n Networking IGMP snooping Yes Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3x Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Multicast Listener Discovery (MLD) snooping Yes Supported data transfer rates 10/100/1000 Mbps Store-&-forward Yes Jumbo frames support Yes Maximum data transfer rate 2 Gbit/s Power Power connector DC-in jack AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Technical details Product colour Black Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Ports & interfaces Basic switching RJ-45 Ethernet ports quantity 8 Power connector DC-in jack Security IGMP snooping Yes Multicast features Multicast Listener Discovery (MLD) snooping Yes Protocols Switching protocols CSMA/CDCertificates Certification CE, FCC, Ro HSDesign Product colour Black LED indicators Yes Certification CE, FCC, Ro HSIndication Power LEDYes LED indicators Yes Power over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 158 mm Depth 101 mm Height 25 mm Packaging data User guide Yes Manual Yes Other features Connectivity technology Wired Bandwidth 16 Gbit/s Wi-Fi No Power LEDYes Packet transfer speed 14880pps/148800pps/1488000pps Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet LANYes Ethernet interface type Gigabit Ethernet Packaging content User guide Yes Manual Yes\n \n \n\n\n\n\n\n





...
Available
£27.38
\n TP-LINK TL-SG108E network switch Unmanaged L2 Gigabit Ethernet (10/100/1000) Black\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n TL-SG108E\n \n \n EAN:\n 6935364021863 6935364021856 5054242155597 5054230861295 0687681917317 8459730218568 0863190005978 5054230884201 6355052070018 0803983008342 0641125114564 0731215283208 0739197184360 0780746857761\n \n \n \n \n\n Description\n \n \n The TL-SG108E 8-Port Gigabit Easy Smart switch is an ideal upgrade from an unmanaged switch, designed for Small & Medium Business networks that require simple network management. Network administrators can effectively monitor traffic via Port Mirroring, Loop Prevention & Cable Diagnostics features. To optimize traffic on your business network, TL-SG108E offers both port & tag based Qo S to keep latency-sensitive traffic moving smoothly & jitter-free. in addition, port-based, tag-based & MTU VLAN can improve security & meet more network segmentation requirements. Moreover, with its innovative energy-efficient technology, the TL-SG108E can save up to 80% of power consumption, making it an eco-friendly solution for your business network.\n\n\n\n Simple & Effective Management\n\n TP-LINK&153;s Gigabit Easy Smart switch, TL-SG108E offers network monitoring for users to observe traffic behavior. With Port Mirroring, Loop Prevention & Cable Diagnostics features, TL-SG108E can identify & even locate connection problems on your business network. Moreover, administrators can designate the priority of the traffic based on Port Priority & 802.1P Priority, to ensure that voice & video are always clear, smooth & lag-free. in addition, to improve security & network performance, TL-SG108E supports MTU VLAN, port-based VLAN & 802.1Q-based VLAN functions. TL-SG108E is an upgrade from the plug-&-play Unmanaged Switch, delivering great value while empowering your network & similarly delivering great value to the end user.\n\n\n\n Go Green with Your Ethernet\n\n You now have the choice to go green when upgrading to a gigabit network! This new generation of TL-SG108E 8-Port Gigabit Easy Smart Switch features the latest energy-efficient technologies that can greatly expand your network&153;s capacity with much less power. It automatically adjusts power consumption according to the link status & cable length to limit the carbon footprint of your network.\n\n\n\n Power down Idle Ports\n\n When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG108E can automatically detect the link status of each port & reduce the power consumption of ports that are idle.\n\n\n\n Power Budget According to Cable Length\n\n Ideally, shorter cables would use less power with less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG108E analyzes the length of the Ethernet cable connected & adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.\n\n\n\n Ease of Use\n\n TL-SG108E is easy to use & manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Its compact size makes it absolutely ideal for desktops with limited space while also being Rack-mountable, convenient & safe. Dynamic LED lights provide real-time work status display & basic fault diagnosis.\n \n \n\n Specifications\n \n Networking IGMP snooping Yes Networking standards IEEE 802.1ab, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x VLAN support Yes Rate limiting Yes Port mirroring Yes Number of VLANs 32 Link aggregation Yes Broadcast storm control Yes Auto MDI/MDI-XYes Auto-negotiation Yes Virtual LAN features VLAN support Yes Number of VLANs 32 Data transmission Number of multicast groups filtered 128 Number of VLANs 32 Throughput 11.9 Mpps Packet buffer memory 1.5 MBMAC address table 4000 entries Switching capacity 16 Gbit/s Store-&-forward Yes Number of queues 4 Jumbo frames support Yes Performance Packet buffer memory 1.5 MBAuto-negotiation Yes Plug & Play Yes Technical details Product colour Black Housing material Metal Management features Switch type Unmanaged Web-based management Yes Quality of Service (Qo S) support Yes Switch layer L2 Ports & interfaces Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Security IGMP snooping Yes Multicast features Number of multicast groups filtered 128 Certificates Certification FCC, CE, Ro HSMemory Packet buffer memory 1.5 MBDesign Product colour Black LED indicators Yes Housing material Metal Certification FCC, CE, Ro HSIndication LED indicators Yes Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 158 mm Depth 101 mm Height 25 mm Packaging data Quick start guide Yes Cables included ACPackaging content Quick start guide Yes Cables included AC\n \n \n\n\n\n\n\n





...
Available

TP-LINK TL-SG105PE Network Switch Unmanaged L2 Gigabit Ethernet
(10/100/1000) Black Power Over Ethernet (PoE)

The TL-SG105PE is an 5-port Gigabit Easy Smart Switch with 4 PoE+ ports, represents a powerful upgrade from an unmanaged switch. It is designed specially for small businesses that require simple network management and PoE function. The TL-SG105PE can connect and power up to four PoE devices, such as wireless access points (APs), IP cameras, and IP phones. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS. Additionally, with port-based, tag-based and MTU VLAN, TL-SG105PE can improve security and meet more network segmentation requirements.nnPower Over Ethernetn4 of the 5 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch
support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).nnOverload ArrangementnTL-SG105PE has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 65 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.nnIntelligent Power ManagementnPriority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are consuming 15.4 W respectively. If an additional PoE device with 20 W is inserted to port 3, the system will cut off the power of port 4 to compensate for
the overload.nnEffective ManagementnTL-SG105PE offers network monitoring for users to observe traffic behavior. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS.nWith Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG105PE can identify and even locate connection problems on your business network. Also, administrators can designate the priority of the traffic based on Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free.nAdditionally, to improve security and network performance, TL-SG105PE supports MTU VLAN, port-based VLAN and 802.1Q-based
VLAN functions. PoE Auto Recovery automatically reboots your dropped or unresponsive PoE-powered devices.nTL-SG105PE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.nnEasy to UsenTL-SG105PE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.\n\n\n\nProduct ID: TL-SG105PE\n\n\n\n\n\nModel:
TL-SG105PE\n\nDatasheet: http://objects.icecat.biz/objects/mmo_80377889_1596625506_2553_30214.pdf\n\n\n\nManual: http://objects.icecat.biz/objects/mmo_80377889_1596625538_9925_32294.pdf\n\n\n\n\n\n\n\n
Availability: In Stock
£42.27

Product Description

The TL-SG105PE is an 5-port Gigabit Easy Smart Switch with 4 Po E+ ports, represents a powerful upgrade from an unmanaged switch. It is designed specially for small businesses that require simple network management & Po E function. The TL-SG105PE can connect & power up to four Po E devices, such as wireless access points (APs), IP cameras, & IP phones. Through its web-based user interface & management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, Po E Auto Recovery & enhanced Qo S. in addition, with port-based, tag-based & MTU VLAN, TL-SG105PE can improve security & meet more network segmentation requirements.nn Power Over Ethernetn 4 of the 5 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (Po E) function. These Po E ports can automatically detect & supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).nn Overload Arrangementn TL-SG105PE has the priority function which will help protect the system when the system power is overloaded. If all Po E PDs power consumption is >= 65 W, a priority will be arranged among the Po E ports, then the system will cut off the power of the lowest-priority port.nn Intelligent Power Managementn Priority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 & 4 are consuming 15.4 W respectively. If an additional Po E device with 20 W is inserted to port 3, the system will cut off the power of port 4 to compensate for the overload.nn Effective Managementn TL-SG105PE offers network monitoring for users to observe traffic behavior. Through its web-based user interface & management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, Po E Auto Recovery & enhanced Qo S.n With Port Mirroring, Loop Prevention & Cable Diagnostics features, TL-SG105PE can identify & even locate connection problems on your business network. Also, administrators can designate the priority of the traffic based on Port Priority, 802.1P Priority & DSCP Priority, to ensure that voice & video are always clear, smooth & lag-free.nin addition, to improve security & network performance, TL-SG105PE supports MTU VLAN, port-based VLAN & 802.1Q-based VLAN functions. Po E Auto Recovery automatically reboots your dropped or unresponsive Po E-powered devices.n TL-SG105PE is an upgrade from the plug-&-play Unmanaged Switch, delivering great value while empowering your network & similarly delivering great value to the end user.nn Easy to Usen TL-SG105PE is easy to use & manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance. Its compact size makes it absolutely ideal for desktops with limited space. Dynamic LED lights provide real-time work status display & basic fault diagnosis.\n\n\n\n Product ID: TL-SG105PE\n\n\n\n\n\n Model: TL-SG105PE\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80377889_1596625506_2553_30214.pdf\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_80377889_1596625538_9925_32294.pdf\n\n\n\n\n\n\n\n

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LED - Light Emitting Diode - a small light source
RJ45 - A computer networking connection. A small square shaped connector.
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
compact - Carefuly designed to ensure an item has a minimal physical size
Cable - A series of wires bonded to form a single thread
Gigabit Ethernet - Also known as GbE or 1 GigE, a network standard which transfers date at one gigabit per second.
speed - A measurement of how fast an object travels between two points
Size - is the measurement of how big an object is in space.
Network - A link and communication between things. Often computers or people.
Small - something that takes up less space than normal.
Compact - something that has a lot combined within a small space.
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Simple - Basic, easy no difficulty in understanding.
Wireless - A wire free device that uses radio and microwaves to send signals.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu