The SATA12RA1 right angle SATA cable features a standard (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple 12-inch connection to a Serial ATA drive, even if space near the drive SATA port is limited. Once the right-angled SATA connector has been inserted into the SATA data port on the drive, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point
- an ideal solution for small or micro form factor computer cases. The right-angled SATA cable features a thin, narrow construction that helps to improve airflow within the computer case; the cable also features a rugged, yet flexible design that makes it easy to make the SATA connection as needed. As an alternative, Star Tech.com also offers an 12in Left Angle SATA cable (SATA12LA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connected to the SATA drive from the opposite direction.
...

Extend SATA Power & Data Connections by up to 1ft. This 12-inch, 22-Pin SATA22PEXT SATA Power & Data Extension Cable enables you to extend the reach between internal SATA power & data connections & a SATA hard drive by up to 1ft. The extension simplifies drive installation by overcoming typical connection limitations, & it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary data connection. The Star Tech.com Advantage
- Extend the reach of your SATA hard drive connection by up to 1ft.
- Eliminates the need to bend or strain the cable to account for a lack of space.
- Backed by a Star Tech.com lifetime warranty.
- Female 22-pin to Male 22-pin SATA Data & Power Combo.
- 12" Extension Cable.
- Creates flexibility when building or upgrading systems.
- Extend backplane adapter connections.
- Extend Drive Dock connections.







...

The SATA8LA1 Left-Angle SATA Cable features a standard (straight) female Serial ATA connector as well as a left-angled (female) SATA connector, providing a simple 8-inch connection to a Serial ATA drive, even if space near the drive data port is limited. Once the left-angled SATA connector has been inserted into the SATA drive data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point
- an ideal solution for Small Form Factor or Micro Form Factor computer cases. The left-angled SATA cable features a durable but narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to connect ta SATA drive as needed, & is backed by Star Tech.com's Lifetime Warranty. Features
- Compliant with Serial ATA III Specifications.
- Supports fast data transfer rates of up to 6 Gbps.
- Meets current Serial ATA specifications & ensures maximum performance.
- Offers 8" in length for greater flexibility.
- Specially designed to improve system airflow & routability. Applications
- Compatible with Serial ATA Hard Drives, CD-RW, DVDs, & other devices.
- For use in servers & storage.
- High-end workstations.
- Mini tower computers.
- Connecting SATA Drive Arrays. The Star Tech.com Advantage
- The thinner, more flexible design of this Serial ATA cable makes it easier to connect inside the system, while improving airflow.
- Supports fast data transfer rates of up to 6 Gbps.
- Left-angled cable connector easily fits in hard to reach areas & tight spaces.













...

The SATA8RA1 Right-Angle SATA Cable features a standard (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple 8-inch connection to a Serial ATA drive, even if space near the drive data port is limited. Once the right-angled SATA connector has been inserted into the SATA drive data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point
- an ideal solution for Small Form Factor or Micro Form Factor computer cases. The right-angled SATA cable features a durable but narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to connect ta SATA drive as needed, & is backed by Star Tech.com's Lifetime Warranty. Features Compliant with Serial ATA III Specifications. Supports fast data transfer rates of up to 6 Gbps. Meets current Serial ATA specifications & ensures maximum performance. Offers 8" in length for greater flexibility. Specially designed to improve system airflow & routability. Applications
- Compatible with Serial ATA Hard Drives, CD-RW, DVDs, & other devices.
- For use in servers & storage.
- High-end workstations.
- Mini tower computers.
- Connecting SATA Drive Arrays. The Star Tech.com Advantage
- Right angled cable connector easily fits in hard to reach areas & tight spaces.
- The thinner, more flexible design of this Serial ATA cable makes it easier to connect inside the system, while improving airflow.
- Supports fast data transfer rates of up to 6 Gbps.








...

This 6-inch 4-Pin (LP4) Molex to Right Angle SATA power adapter features one 4-Pin Molex (LP4) male connector & one (female) right angle SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive. ...

The SATAPOWEXT12 SATA Power Extension Cable (15-pin, 12-inch) enables you to extend the reach between internal SATA power & drive connections by up to 12 inches. The extension cable helps to simplify drive installation by overcoming typical connection limitations & reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.
- Extends the reach from the SATA power connection to your SATA drive by up to 12", providing more flexibility.
- Eliminates the need to bend or strain the SATA cable to account for a lack of space.

...

The SATARA12 Right Angle (90-degree) SATA cable (12in) enables you to plug in your SATA hard drive in hard to reach areas or tight spaces, using right-angled SATA connectors to reduce the amount of space required at the connection point & supports full SATA 3.0 bandwidth of up to 6 Gbps when used with SATA 3.0 compliant drives. Featuring a low profile, yet durable construction, the flexible design improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance, & reliability this right angle SATA cable is backed by our lifetime warranty. The Star Tech.com Advantage
- Right-angled SATA connectors easily fit into hard to reach areas & tight spaces, providing flexibility to position your SATA drive as needed within your system case.
- Features a thin cable design, which helps reduce clutter & increase airflow within the computer/server case, for optimum system performance.
- Backed by Star Tech.com lifetime warranty, ensuring a dependable connection. Features
- 2x Right-Angled/90-degree SATA connectors.
- Supports full SATA 3.0 6 Gbps bandwidth.
- Provides 12" in cable length. Applications
- Installing Serial ATA hard drives, & DVD drives in Small Form Factor computer cases.
- Server & storage subsystem applications.
- High-end workstation drive installations.
- Connections to SATA Drive Arrays.









...

The SATDOCK22U3S USB (Universal Serial Bus) 3.0 to SATA Dual Hard Drive Docking Station enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the rest. Using a single USB (Universal Serial Bus) connection, this docking station can provide data transfer rates of up to 5 Gbps with Super Speed USB (Universal Serial Bus) 3.0, while remaining backward compatible with USB (Universal Serial Bus) 2.0 systems (data transfer rates up to 480 Mbps). Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. ...

The SATDOCK4U3 USB (Universal Serial Bus) 3.0 4-Bay SATA Hard Drive Docking Station is a convenient, time-saving storage solution for 2.5-inch & 3.5-inch SATA hard drives (HDD) & solid state drives (SSD), that enables you to connect up to 4 SATA drives through a single host connection, while controlling the power status (on/off) of each individual drive independently from the rest. The hard drive docking station features Super Speed USB (Universal Serial Bus) 3.0 connectivity (backward compatible with USB (Universal Serial Bus) 2.0), which supports data transfer rates up to 10x faster than USB (Universal Serial Bus) 2.0. The docking station also offers dual built-in, variable-speed 60mm cooling fans with manual control (including off). Double the value of this hard drive docking station, by using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot. The Star Tech.com Advantage
- With access to up to 4 SATA drives simultaneously over a single USB (Universal Serial Bus) 2.0/3.0 connection, massive amounts of data can conveniently be utilized
- Independent power buttons & eject mechanism for each SATA hard drive enable quick & easy hot-swapping capability
- Dual, variable speed fans means that you can adjust the amount of cooling for any kind of environment or drives


...

The SATDOCK4U3RE USB (Universal Serial Bus) 3.0 & e SATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time & effort. As an external HDD dock, it can be connected to your host computer through USB (Universal Serial Bus) 3.0 or e SATA, providing data transfer speeds up to 5 Gbps or 3 Gbps respectively, from the hard drives to your computer system. Features Quick & Secure Erase functions & support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP). ...