Ensure perfect rail-to-rail alignment, when mounting equipment in your server rack with these rack unit labeling strips\n\n These labels help you install equipment in your server rack more easily. You can add up to 52 unit markings on either side of any rack. This is perfect for adding unit measurements to server racks that don&153;t have unit markings, or to older racks that have had their markings worn off over time.\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Avoid hassle when installing rackmount equipment\n\n When rack unit measurements are not visible, it can make installing large equipment a hassle. You typically have to align the equipment by eye, which can lead to installing the device in different unit holes on each side of your rack, but that could cause the annoying & time-consuming task of repositioning the device after it's been installed. Using these rack labels is an inexpensive solution that ensures proper alignment & hassle-free installation.\n\n Fast & simple application on any rack, up to 52U in size\n\n The label strips are self-adhesive, easily attaching to the side of your rack for a simple installation. Each label in the kit contains markings for up to 52 units. This ensures that you can easily cut the label down to a smaller size & fit any rack, up to 52U in size.\n\n The labels included in the RKUNITAPE are backed by a 2-year Star Tech.com warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Helps you visually align rack-mountable equipment during installation\n- Cut-to-size U labels for your rack, up to 52U\n- Two labels included to mark the front & back of your rack Feature Feature Value Product colour Black Rack capacity 52 U Storage temperature (T-T)4
- 38 &176;CRo HS compliance Y Certification TAA, REACHWidth 6.4 mm Depth 2200 mm Height 10 mm Weight 18 g Quantity per pack 2 pc (s) Package width 125 mm Package depth 225 mm Package height 22 mm Package weight 28 g Quick installation guide Y
...

Ensure perfect rail-to-rail alignment, when mounting equipment in your server rack with these rack unit labeling strips\n\n These labels help you install equipment in your server rack more easily. You can add up to 52 unit markings on either side of any rack. This is perfect for adding unit measurements to server racks that don&153;t have unit markings, or to older racks that have had their markings worn off over time.\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Avoid hassle when installing rackmount equipment\n\n When rack unit measurements are not visible, it can make installing large equipment a hassle. You typically have to align the equipment by eye, which can lead to installing the device in different unit holes on each side of your rack, but that could cause the annoying & time-consuming task of repositioning the device after it's been installed. Using these rack labels is an inexpensive solution that ensures proper alignment & hassle-free installation.\n\n Fast & simple application on any rack, up to 52U in size\n\n The label strips are self-adhesive, easily attaching to the side of your rack for a simple installation. Each label in the kit contains markings for up to 52 units. This ensures that you can easily cut the label down to a smaller size & fit any rack, up to 52U in size.\n\n The labels included in the RKUNITAPE are backed by a 2-year Star Tech.com warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Helps you visually align rack-mountable equipment during installation\n- Cut-to-size U labels for your rack, up to 52U\n- Two labels included to mark the front & back of your rack Feature Feature Value Product colour Black Rack capacity 52 U Storage temperature (T-T)4
- 38 &176;CRo HS compliance Y Certification TAA, REACHWidth 6.4 mm Depth 2200 mm Height 10 mm Weight 18 g Quantity per pack 2 pc (s) Package width 125 mm Package depth 225 mm Package height 22 mm Package weight 28 g Quick installation guide Y
...

Control your server or KVM switch from a centralized HD KVM console\n\n Providing centralized control of your single PC or dozens of servers, this HD rackmount KVM console also gives you easy access to & visibility of your system while it&153;s mounted in a server rack or cabinet. Connected to your servers through a separate KVM switch (sold separately), the LCD console installs into 1U of rack-space, offering a space-efficient solution for complete console control.\n\n High-Definition LCD Monitor\n\n The 1080p KVM console&153;s monitor is 17.3&157; & LED back-lit, for low power consumption. It supports high-definition resolutions up to 1920x 1080 providing sharper video performance. This HD console also provides more screen space, helping you to run multiple applications on the same screen, increasing your productivity.\n\n Clutter-Free Monitoring\n\n The rack-mount LCD console slides out from 1U of rack space, enabling you to easily monitor & control a single server or multiple servers when connected through a KVM switch. The rackmount VGA KVM features a handle that makes it easy to slide the console in & out of the server rack, keeping your area organized & clutter-free.\n\n Simple Setup\n\n This single-port KVM console comes with everything you need to set up:\n\n 1 Audio Cable\n\n 1 Set of KVM Cables (VGA)\n\n 2 Rear Mounting Brackets\n\n M5 Cage Nuts & Screws\n\n Cost Effective Solution\n\n This KVM console provides all the essential controls you&153;ll need to manage your server room at a low cost. The console features a built-in keyboard & a touchpad for intuitive control, as well as a high-definition LCD display.\n\n Star Tech.com offers a wide selection of KVM consoles to help you access your systems more efficiently without the expense & clutter of extra peripherals. This rackmount KVM console is backed by a 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- High Definition: Rackmount KVM console w/high-resolution widescreen (16:9) 1080p LCD panel is perfect for applications needing extra detail or substantial info on one screen E.g. IP camera monitoring\n- Wide compatibility: This HD KVM console drawer works with virtually any KVM switch brand or model that supports VGA & USB (Universal Serial Bus) interfaces & conveniently slides into the server rack when not in use\n- Versatile Interfaces: Rack mount monitor with 17.3"" Active Matrix TFT 16:9 widescreen\n\n\n\n Product ID: RKCONS17HD\n\n\n\n\n\n Model: Rackmount KVM Console HD 1080p
- Single Port VGA KVM with 17"" LCD Monitor for Server Rack
- Fully Featured 1U LCD KVM Drawer w/ Cables & Hardware
- USB (Universal Serial Bus) Support
- 50, 000 MTBF\n\n Datasheet: http://objects.icecat.biz/objects/mmo_42895200_1591341545_6342_16515.pdf\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_42895200_1591341526_7568_16590.pdf&pipe;http://objects.icecat.biz/objects/mmo_42895200_1591341532_591_16471.pdf&pipe;http://objects.icecat.biz/objects/mmo_42895200_1591341540_8475_25361.pdf\n\n\n\n\n\n\n\n



...

This depth adapter kit lets you extend or reduce the mounting depth of one rack unit (1U) in your server rack by up to four inches. If you're using the adapter kit in a two post installation the extenders can support a total weight load of 10 lbs. (4.5 kg). If you're using the adapter kit in a four post installation, the extenders can support a total weight load of 90 lbs. (40 kg), you can even use two sets of extender brackets in a four post installation & achieve the same weight capacity performance.\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Mount equipment that's too long, or too short\n You can use this adapter kit to mount equipment in your server rack that's up to four inches longer or shorter than the rack's mounting depth.\n\n Save money by mounting all of your equipment in one rack\n With this adapter kit, you can customize your server rack to support different mounting depths, so you have the freedom to mount equipment of different depths in the same rack. It&153;s a cost-saving, hassle-free way to consolidate your equipment into a single rack, so you have one server rack to manage instead of two.\n\n Cable management flexibility\n The depth adapter kit can also be used to help manage cables. You can mount equipment 4&157; in from the rails, to prevent cables from protruding from the rack. You can use the rail depth adapter to mount equipment that has high density cabling, such as patch panels, PDUs or network switches, to minimize the effects of cable strain & provide easier access to the cables.\n\n The RDA1U is backed by a 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Rack capacity 1URo HS compliance Y Certification TAAWidth 45 mm Depth 101 mm Height 21 mm Weight 116 g Quantity per pack 2 pc (s) Package width 25 mm Package depth 105 mm Package height 200 mm Screws included Y ...

This depth adapter kit lets you extend or reduce the mounting depth of one rack unit (1U) in your server rack by up to four inches. If you're using the adapter kit in a two post installation the extenders can support a total weight load of 10 lbs. (4.5 kg). If you're using the adapter kit in a four post installation, the extenders can support a total weight load of 90 lbs. (40 kg), you can even use two sets of extender brackets in a four post installation & achieve the same weight capacity performance.\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Mount equipment that's too long, or too short\n You can use this adapter kit to mount equipment in your server rack that's up to four inches longer or shorter than the rack's mounting depth.\n\n Save money by mounting all of your equipment in one rack\n With this adapter kit, you can customize your server rack to support different mounting depths, so you have the freedom to mount equipment of different depths in the same rack. It&153;s a cost-saving, hassle-free way to consolidate your equipment into a single rack, so you have one server rack to manage instead of two.\n\n Cable management flexibility\n The depth adapter kit can also be used to help manage cables. You can mount equipment 4&157; in from the rails, to prevent cables from protruding from the rack. You can use the rail depth adapter to mount equipment that has high density cabling, such as patch panels, PDUs or network switches, to minimize the effects of cable strain & provide easier access to the cables.\n\n The RDA1U is backed by a 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Rack capacity 1URo HS compliance Y Certification TAAWidth 45 mm Depth 101 mm Height 21 mm Weight 116 g Quantity per pack 2 pc (s) Package width 25 mm Package depth 105 mm Package height 200 mm Screws included Y ...

The RCACOAXMF one-piece RCA to F Type Coax Cable converter features an RCA (male) connector as well as an F Type Coax female connector, letting you convert an RG6 Coax cable into a RCA cable. This RCA to RG6 F Type Coax Cable Adapter is gold plated to maximize conductivity & resist corrosion, & is backed by our lifetime warranty. The Star Tech.com Advantage
- The gold plated adapter resist corrosion & increased conductivity between the RCA connector & Coax cable. Features
- Convert RCA to Shielded Coax cable for long runs.
- Gold plated for maximum conductivity. Applications
- Use existing Coax cable runs to extend an Composite RCA signal over a longer distance.



...

Add additional chassis cooling with a 50mm ball bearing fan This versatile 50mm x 50mm x 15mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, & features a dual ball bearing design that ensures reliable cooling & longer fan lifespan. The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case & features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information. * A dual ball bearing design ensures reliability & longer life * Comes ready for either 3-pin motherboard fan headers or LP4 Molex power supplies * Backed by a Star Tech.com 2-year warranty & free lifetime technical support ...

Add additional chassis cooling with a 60mm ball bearing fan This versatile 60mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, & features a dual ball bearing design that ensures reliable cooling & longer fan lifespan. The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case & features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information. * A dual ball bearing design ensures reliability & longer life * Comes ready for either 3-pin motherboard fan headers or LP4 Molex power supplies * Backed by a Star Tech.com 2-year warranty & free lifetime technical support ...

Add additional chassis cooling with a 70mm ball bearing fan This versatile 70mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, & features a dual ball bearing design that ensures reliable cooling & longer fan lifespan. The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case & features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information. * A dual ball bearing design ensures reliability & longer life * Backed by a Star Tech.com 2-year warranty & free lifetime technical support ...

Keep a system running cooler with a 70mm ball bearing case fan\n\n This 70mm TX3 Dual Ball Bearing CPU Cooler Fan is a cost-effective replacement fan for standard CPUs as well as many different types of 1U or low profile CPU coolers that use a 70mm fan.\n\n For peace of mind, the CPU cooling fan features a Tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status, while a dual ball bearing design helps provide smooth operation & longer (fan) lifespan.\n\n The Star Tech.com Advantage\n\n- A dual ball bearing design ensures reliability & longer life\n- Backed by a Star Tech.com 2-year warranty & free lifetime technical support Feature Feature Value Suitable for Computer case Type Fan Fan diameter 7 cm Rotational speed (max)3500 RPMNoise level (high speed)33 d B Maximum airflow 21.33 cfm Product colour Black Material Plastic Ro HS compliance Y Power consumption (typical)2.16 WVoltage 12 VRated current 0.25 AWidth 10 mm Depth 70 mm Height 70 mm Weight 35 g Package width 32 mm Package depth 87 mm Package height 111 mm Package weight 100 g ...