Extend HDMI up to 230ft (70m) over a single CAT5e/6 cable with Power over Cable to Receiver\n\n The Star Tech.com HDBase T extender kit, extends HDMI up to 230 feet (70 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying digital audio. For added versatility, both the transmitter & receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, & hospitals.\n\n What is HDBase T?\n\n HDBase T is a standardized, zero latency, video distribution technology that&153;s revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable.\n\n Extend more with HDBase T\n\n The extender offers HDBase T technology with HDMI & Power in a single extender kit, for complete end-to-end solution. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBase T is the clear choice for every integrator & system designer. The added benefit of power over cable means you&153;ll only need one power source at either side of your extension, great for extending video to areas where power outlets may be limited, such as industrial sites.\n\n Astonishing 4K picture quality from an impressive distance\n\n With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet.\n\n With support for 4K you&153;ll be amazed at how HDBase T maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 130 feet away from your video source. Plus, because the extender supports High-Definition 1080p & lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great.\n\n Simplify your setup\n\n This extender has been specially crafted for a smooth, tidy installation. HDBase T technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple Ethernet cables while, reducing potential failure points. Plus, the added benefit of power over cable means you&153;ll only need one power source to power both your extender & receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender & receiver for discrete, professional mounting.\n\n The ST121HDBTE is TAA compliant & backed by a 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Requires only a single power adapter for both the Transmitter & Receiver\n- Cost-effective HDMI extension through non-proprietary network cabling\n- Optional mounting hardware included for a tidy, professional installation Feature Feature Value Type AV transmitter & receiver Maximum resolution 4096 x 2160 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 70 m Audio system Multichannel Audio output channels 7.1 channels LED indicators Status Supported video modes 720p, 1080p Supported graphics resolutions 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 4096 x 2160 Cable length 0.1 m Material Aluminium Daisy chain N Mean time between failures (MTBF)52000 h Product colour Black Ro HS compliance Y Certification CE, FCC, HDBT, TAA, REACHConnectivity technology Wired RJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 1DC-in jack YAC input voltage 110-240 VOperating voltage 12 VInput current 0.5 AOutput current 1.5 APower consumption (typical)3 WPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 67 mm Depth 80 mm Height 25 mm Weight 428 g Package width 235 mm Package depth 156 mm Package height 65 mm Package weight 1.1kg AC adapter included Y Cables included LAN (RJ-45) Included power plug types AU, EU, NA, UKManual Y Mounting brackets included Y Grounding wire Y Audio support Y


...

Extend HDMI up to 230ft (70m) over a single CAT5e/6 cable with Power over Cable to Receiver\n\n The Star Tech.com HDBase T extender kit, extends HDMI up to 230 feet (70 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying digital audio. For added versatility, both the transmitter & receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, & hospitals.\n\n What is HDBase T?\n\n HDBase T is a standardized, zero latency, video distribution technology that&153;s revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable.\n\n Extend more with HDBase T\n\n The extender offers HDBase T technology with HDMI & Power in a single extender kit, for complete end-to-end solution. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBase T is the clear choice for every integrator & system designer. The added benefit of power over cable means you&153;ll only need one power source at either side of your extension, great for extending video to areas where power outlets may be limited, such as industrial sites.\n\n Astonishing 4K picture quality from an impressive distance\n\n With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet.\n\n With support for 4K you&153;ll be amazed at how HDBase T maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 130 feet away from your video source. Plus, because the extender supports High-Definition 1080p & lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great.\n\n Simplify your setup\n\n This extender has been specially crafted for a smooth, tidy installation. HDBase T technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple Ethernet cables while, reducing potential failure points. Plus, the added benefit of power over cable means you&153;ll only need one power source to power both your extender & receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender & receiver for discrete, professional mounting.\n\n The ST121HDBTE is TAA compliant & backed by a 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Requires only a single power adapter for both the Transmitter & Receiver\n- Cost-effective HDMI extension through non-proprietary network cabling\n- Optional mounting hardware included for a tidy, professional installation Feature Feature Value Type AV transmitter & receiver Maximum resolution 4096 x 2160 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 70 m Audio system Multichannel Audio output channels 7.1 channels LED indicators Status Supported video modes 720p, 1080p Supported graphics resolutions 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 4096 x 2160 Cable length 0.1 m Material Aluminium Daisy chain N Mean time between failures (MTBF)52000 h Product colour Black Ro HS compliance Y Certification CE, FCC, HDBT, TAA, REACHConnectivity technology Wired RJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 1DC-in jack YAC input voltage 110-240 VOperating voltage 12 VInput current 0.5 AOutput current 1.5 APower consumption (typical)3 WPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 67 mm Depth 80 mm Height 25 mm Weight 428 g Package width 235 mm Package depth 156 mm Package height 65 mm Package weight 1.1kg AC adapter included Y Cables included LAN (RJ-45) Included power plug types AU, EU, NA, UKManual Y Mounting brackets included Y Grounding wire Y Audio support Y


...

Extend HDMI up to 230ft (70m) over a single CAT5e/6 cable with Power over Cable to Receiver\n\n The Star Tech.com HDBase T extender kit, extends HDMI up to 230 feet (70 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD & Full HD resolutions (4K / 1080p) with support for 3D & the accompanying digital audio. For added versatility, both the transmitter & receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, & hospitals.\n\n What is HDBase T?\n\n HDBase T is a standardized, zero latency, video distribution technology that&153;s revolutionizing HDMI distribution. HDBase T uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio & video along with additional signals such as 100 Base T Ethernet, IR, RS-232 serial & power over cable.\n\n Extend more with HDBase T\n\n The extender offers HDBase T technology with HDMI & Power in a single extender kit, for complete end-to-end solution. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBase T is the clear choice for every integrator & system designer. The added benefit of power over cable means you&153;ll only need one power source at either side of your extension, great for extending video to areas where power outlets may be limited, such as industrial sites.\n\n Astonishing 4K picture quality from an impressive distance\n\n With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet.\n\n With support for 4K you&153;ll be amazed at how HDBase T maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 130 feet away from your video source. Plus, because the extender supports High-Definition 1080p & lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great.\n\n Simplify your setup\n\n This extender has been specially crafted for a smooth, tidy installation. HDBase T technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple Ethernet cables while, reducing potential failure points. Plus, the added benefit of power over cable means you&153;ll only need one power source to power both your extender & receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender & receiver for discrete, professional mounting.\n\n The ST121HDBTE is TAA compliant & backed by a 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Requires only a single power adapter for both the Transmitter & Receiver\n- Cost-effective HDMI extension through non-proprietary network cabling\n- Optional mounting hardware included for a tidy, professional installation Feature Feature Value Type AV transmitter & receiver Maximum resolution 4096 x 2160 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 70 m Audio system Multichannel Audio output channels 7.1 channels LED indicators Status Supported video modes 720p, 1080p Supported graphics resolutions 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 4096 x 2160 Cable length 0.1 m Material Aluminium Daisy chain N Mean time between failures (MTBF)52000 h Product colour Black Ro HS compliance Y Certification CE, FCC, HDBT, TAA, REACHConnectivity technology Wired RJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 1DC-in jack YAC input voltage 110-240 VOperating voltage 12 VInput current 0.5 AOutput current 1.5 APower consumption (typical)3 WPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 67 mm Depth 80 mm Height 25 mm Weight 428 g Package width 235 mm Package depth 156 mm Package height 65 mm Package weight 1.1kg AC adapter included Y Cables included LAN (RJ-45) Included power plug types AU, EU, NA, UKManual Y Mounting brackets included Y Grounding wire Y Audio support Y


...

The ST121SHD50 HDMI&174; over Cat 5e/ Cat 6 Video Extender kit lets you extend HDMI video & audio by up to 165 feet (50 Meters) over dual Cat 5e cables or dual Cat 6 cables. For added versatility the kit features Power Over Cable & only requires a single power adapter that can be connected to either the Transmitter or Receiver.\n\n With support for High-Definition resolutions of up to 1920x 1080 / 1080p & the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a convenient plug-&-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures native resolution & maximum compatibility with your display or projector.\n\n For added flexibility & convenience, HDMI cables up to 32ft (10m) can be connected to both the local & remote units, which lets you extend your HDMI signal to even further distances.\n\n The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local transmitter & remote receiver units, along with optional hardware that lets you mount the units as needed. Plus, with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n- Requires only a single power adapter that can be connected to either the Transmitter or Receiver\n- Cost-effective HDMI extension through non-proprietary network cabling\n- Clean, professional installation, using optional mounting hardware (included) Feature Feature Value Type AV transmitter & receiver Maximum resolution 1920 x 1080 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 50 m LED indicators Power Supported video modes 1080i, 1080p Supported graphics resolutions 1920 x 1080 (HD 1080) Material Aluminium Rack mounting Y Daisy chain N Product colour Black Ro HS compliance Y Certification CE, FCCEthernet LANYRJ-45 input ports 2RJ-45 output ports 2HDMI in 1 Number of HDMI outputs 1DC-in jack YAC input voltage 100-240 VOperating voltage 12 VInput current 0.5 AOutput current 1.5 APower consumption (typical)18 WPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 51 mm Depth 80 mm Height 21 mm Weight 157 g Receiver

Dimensions (W x D x H)51 x 80 x 21 mm Receiver weight 157 g Transmitter

Dimensions (Wx Dx H)51 x 80 x 21 mm Transmitter weight 157 g Package

Dimensions (Wx Dx H)153 x 235 x 65 mm Package weight 700 g AC adapter included Y Cables included HDMIManual Y Mounting brackets included Y








...

The ST121SHD50 HDMI&174; over Cat 5e/ Cat 6 Video Extender kit lets you extend HDMI video & audio by up to 165 feet (50 Meters) over dual Cat 5e cables or dual Cat 6 cables. For added versatility the kit features Power Over Cable & only requires a single power adapter that can be connected to either the Transmitter or Receiver.\n\n With support for High-Definition resolutions of up to 1920x 1080 / 1080p & the accompanying digital audio, this cost-effective HD extender can easily be installed using new or existing Ethernet infrastructure wiring. For a convenient plug-&-play installation, the HDMI extender features built-in EDID monitor emulation, which ensures native resolution & maximum compatibility with your display or projector.\n\n For added flexibility & convenience, HDMI cables up to 32ft (10m) can be connected to both the local & remote units, which lets you extend your HDMI signal to even further distances.\n\n The HDMI extender kit offers a point-to-point digital signage solution right out of the box, including both local transmitter & remote receiver units, along with optional hardware that lets you mount the units as needed. Plus, with Power Over Cable, you can easily extend an HDMI signal in areas where access to power outlets is limited.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n- Requires only a single power adapter that can be connected to either the Transmitter or Receiver\n- Cost-effective HDMI extension through non-proprietary network cabling\n- Clean, professional installation, using optional mounting hardware (included) Feature Feature Value Type AV transmitter & receiver Maximum resolution 1920 x 1080 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 50 m LED indicators Power Supported video modes 1080i, 1080p Supported graphics resolutions 1920 x 1080 (HD 1080) Material Aluminium Rack mounting Y Daisy chain N Product colour Black Ro HS compliance Y Certification CE, FCCEthernet LANYRJ-45 input ports 2RJ-45 output ports 2HDMI in 1 Number of HDMI outputs 1DC-in jack YAC input voltage 100-240 VOperating voltage 12 VInput current 0.5 AOutput current 1.5 APower consumption (typical)18 WPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 51 mm Depth 80 mm Height 21 mm Weight 157 g Receiver

Dimensions (W x D x H)51 x 80 x 21 mm Receiver weight 157 g Transmitter

Dimensions (Wx Dx H)51 x 80 x 21 mm Transmitter weight 157 g Package

Dimensions (Wx Dx H)153 x 235 x 65 mm Package weight 700 g AC adapter included Y Cables included HDMIManual Y Mounting brackets included Y








...

HDMI Balun Kit &pipe; HDR &pipe; 4:4:4 &pipe; 7.1 Audio Support &pipe; 165 ft. (50 m)\n\n This HDMI over CAT6 extender lets you transmit your 4K 60 Hz signal up to 165 ft. (50 m) over a single CAT6 cable. The extender supports High Dynamic Range (HDR), providing high contrast images with enhanced video.\n\n Astonishing 4K Picture Quality\n\n This HDMI Ethernet extender supports a 4K 60 Hz (3840 x 2160) resolution, providing four times the picture quality of high-definition (1080p). The extender supports HDMI 2.0 capabilities, offering 4:4:4 chroma subsampling. This ensures a crystal-clear picture that's ideal for delivering video content. With HDR support, you can enjoy increased contrast, color brightness & greater luminosity in your images.\n\n Long-Distance Transmission\n\n Extend an HDMI signal to up to 165 ft. (50 m) with the HDMI to CAT6 converter. Use your existing CAT6 cable infrastructure with a direct connection to the converter for an easy run through walls & ceilings, saving you on installation costs.\n\n Compatible with HDCP 2.2 Devices\n\n Connect your HDMI 2.0 devices & displays with complete confidence, knowing this extender is HDCP 2.2 compliant. This lets you harness the capabilities of HDMI-enabled devices such as Blu-ray players or online streaming devices in higher resolutions. It is also backward compatible with previous generations of HDMI & HDCP.\n\n ST121HD20V is backed by 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Crystal-clear picture quality with support for resolutions up to 4K 60 Hz\n- Compatible with HDR & 4:4:4 chroma subsampling for lifelike images\n- Hassle-free setup with long-distance transmission over a reliable connection Feature Feature Value Type AV transmitter & receiver Maximum resolution 3840 x 2160 pixels Cable types supported Cat 6 Maximum transfer distance 50 m Maximum refresh rate 60 Hz Audio output channels 7.1 channels Supported graphics resolutions 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160HDCPYHDCP version 2.2 Product colour Black Ro HS compliance Y Certification CE, FCC, REACHConnectivity technology Wired RJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 2HDMI version 2.0AC input voltage 100
- 240 VInput current 0.3 AOperating voltage (transmitter)12 VOutput current 1 AOperating voltage (receiver)12 VPower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 70 mm Depth 97 mm Height 13 mm Weight 135 g Package width 130 mm Package depth 220 mm Package height 70 mm Package weight 155 g Included power plug types ANZ, EU, JP, NA, UKQuick start guide YIR blaster included YIR receiver included Y



...

Extend 1080p video & four USB (Universal Serial Bus) peripheral devices to a remote location\n\n This HDMI extender kit lets you transmit your 1080p HD video source to your remote HDMI display at distance of up to 165 ft. away (50 m) using shielded CAT6 cabling. The extender features a built-in 4-port USB (Universal Serial Bus) 2.0 hub that also lets you connect four remote USB (Universal Serial Bus) peripheral devices at your display location.\n\n Crystal-clear picture quality\n\n Using this HDMI extender, you can maintain the quality of your high-definition video signal along with the accompanying 7.1 digital audio, even at 165 feet away from your source device. The extender supports resolutions up to 1920x 1200 or 1080p
- perfect for dazzling your audience in remote digital-signage applications in hospitals or at shopping centers.\n\n Hassle-free remote USB (Universal Serial Bus) integration\n\n The built-in 4-port USB (Universal Serial Bus) 2.0 hub lets you remotely connect, access or control up to four USB (Universal Serial Bus) devices located at your remote display
- great for flash drives, printers, scanners, external hard drives & I/O devices. Remote USB (Universal Serial Bus) extension also enables you to remotely control your source device, which is ideal for adding touchscreen interfaces at your display in market or POS kiosks.\n\n Easy installation & setup\n\n For hassle-free setup the HDMI extender offers easy plug-&-play installation with no additional software or drivers required. Plus, the extender passes the EDID information included in your HDMI signal, & automatically adjusts video equalization ensuring you won&153;t have to configure it manually. Mounting hardware is also included, for a tidy & professional installation.\n\n Note: To maximize performance this extender requires shielded CAT6 cable. When using unshielded CAT6 cable the maximum distance is reduced to 30m. When using CAT5 cable the maximum distance is reduced to 15m. \n\n The ST121USBHD is TAA compliant & backed by a 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Crystal-clear picture quality, with support for uncompressed 1920x 1200 or 1080p HD video extension\n- Easy remote peripheral integration, with a built-in 4-port USB (Universal Serial Bus) hub\n- Tidy, professional installation using the included mounting hardware\n\n- Crystal-clear picture quality, with support for uncompressed 1920x 1200 or 1080p HD video extension\n- Easy remote peripheral integration, with a built-in 4-port USB (Universal Serial Bus) hub\n- Tidy, professional installation using the included mounting hardware\n- Extends HDMI video & four USB (Universal Serial Bus) peripheral devices up to 165 ft\n- Supports CAT5e & CAT6 Ethernet cable\n- HDMI transmitter & receiver included Feature Feature Value Type AV transmitter & receiver Cable types supported Cat 5, Cat 5e, Cat 6 Maximum transfer distance 50 m Maximum refresh rate 60 Hz Supported video modes 1080p Colour depth 48 bit Carrier frequency 38 k Hz Product colour Black Ro HS compliance Y Certification CE, FCC, TAA, REACHConnectivity technology Wired RJ-45 input ports 2RJ-45 output ports 2HDMI in 1 Number of HDMI outputs 1USB ports quantity 7USB connector type Mini-USB B, USB Type-AOperating voltage 5 VOutput current 1 APower consumption (typical)5 WExternal power adapter Y Power plug type Type NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 82 mm Depth 82 mm Height 21 mm Weight 460 g Package

Dimensions (Wx Dx H)175 x 306 x 74 mm Package width 309 mm Package depth 180 mm Package height 71 mm Package weight 300 g AC adapter included Y Cables included LAN (RJ-45), USBQuick start guide Y Audio support Y






...

Extend 1080p video & four USB (Universal Serial Bus) peripheral devices to a remote location\n\n This HDMI extender kit lets you transmit your 1080p HD video source to your remote HDMI display at distance of up to 165 ft. away (50 m) using shielded CAT6 cabling. The extender features a built-in 4-port USB (Universal Serial Bus) 2.0 hub that also lets you connect four remote USB (Universal Serial Bus) peripheral devices at your display location.\n\n Crystal-clear picture quality\n\n Using this HDMI extender, you can maintain the quality of your high-definition video signal along with the accompanying 7.1 digital audio, even at 165 feet away from your source device. The extender supports resolutions up to 1920x 1200 or 1080p
- perfect for dazzling your audience in remote digital-signage applications in hospitals or at shopping centers.\n\n Hassle-free remote USB (Universal Serial Bus) integration\n\n The built-in 4-port USB (Universal Serial Bus) 2.0 hub lets you remotely connect, access or control up to four USB (Universal Serial Bus) devices located at your remote display
- great for flash drives, printers, scanners, external hard drives & I/O devices. Remote USB (Universal Serial Bus) extension also enables you to remotely control your source device, which is ideal for adding touchscreen interfaces at your display in market or POS kiosks.\n\n Easy installation & setup\n\n For hassle-free setup the HDMI extender offers easy plug-&-play installation with no additional software or drivers required. Plus, the extender passes the EDID information included in your HDMI signal, & automatically adjusts video equalization ensuring you won&153;t have to configure it manually. Mounting hardware is also included, for a tidy & professional installation.\n\n Note: To maximize performance this extender requires shielded CAT6 cable. When using unshielded CAT6 cable the maximum distance is reduced to 30m. When using CAT5 cable the maximum distance is reduced to 15m. \n\n The ST121USBHD is TAA compliant & backed by a 2-year Star Tech.com warranty with free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Crystal-clear picture quality, with support for uncompressed 1920x 1200 or 1080p HD video extension\n- Easy remote peripheral integration, with a built-in 4-port USB (Universal Serial Bus) hub\n- Tidy, professional installation using the included mounting hardware\n\n- Crystal-clear picture quality, with support for uncompressed 1920x 1200 or 1080p HD video extension\n- Easy remote peripheral integration, with a built-in 4-port USB (Universal Serial Bus) hub\n- Tidy, professional installation using the included mounting hardware\n- Extends HDMI video & four USB (Universal Serial Bus) peripheral devices up to 165 ft\n- Supports CAT5e & CAT6 Ethernet cable\n- HDMI transmitter & receiver included Feature Feature Value Type AV transmitter & receiver Cable types supported Cat 5, Cat 5e, Cat 6 Maximum transfer distance 50 m Maximum refresh rate 60 Hz Supported video modes 1080p Colour depth 48 bit Carrier frequency 38 k Hz Product colour Black Ro HS compliance Y Certification CE, FCC, TAA, REACHConnectivity technology Wired RJ-45 input ports 2RJ-45 output ports 2HDMI in 1 Number of HDMI outputs 1USB ports quantity 7USB connector type Mini-USB B, USB Type-AOperating voltage 5 VOutput current 1 APower consumption (typical)5 WExternal power adapter Y Power plug type Type NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 82 mm Depth 82 mm Height 21 mm Weight 460 g Package

Dimensions (Wx Dx H)175 x 306 x 74 mm Package width 309 mm Package depth 180 mm Package height 71 mm Package weight 300 g AC adapter included Y Cables included LAN (RJ-45), USBQuick start guide Y Audio support Y






...

The HDMI&174; over IP kit lets you extend an HDMI signal over your network. You can use additional receivers (sold separately) to distribute the HDMI signal to multiple locations & combine your remote displays to create a video wall.\n\n Versatile configuration options\n In a point-to-multipoint setup, the HDMI over IP kit can be connected through an unmanaged or managed Gigabit LAN portal. You can connect one or multiple sources (transmitters) to multiple displays (receivers) over IP, using a managed Gigabit Ethernet switch (with IGMP). For additional scalability, you can combine up to 16 different kits.\n\n For smaller-scale applications, the extender kit can be used as a point-to-point video extender. You can connect the transmitter & receiver units directly over Cat 5 or Cat 6 cabling for a small-scale, one-to-one HDMI extension up to 330 feet (100 meters).\n\n Manage your video distribution from your mobile device\n The HDMI distribution kit features easy-to-use video control software that helps you manage your IP video distribution. The app is simple to set up with automatic hardware detection, & lets you switch video sources for each remote display. You can also intuitively create & manage a video wall for an impressive digital signage presentation to catch the attention of your audience.\n\n Professional, cost-effective, simple installation\n The HDMI over IP extender kit

Includes:: optional mounting hardware for a tidy installation. Ideal for high-definition applications, the extender supports 1080p video resolutions & digital stereo audio. Plus, because the extender uses standard non-proprietary Cat 5e or Cat 6 Ethernet cable with RJ45 connectors, it eliminates both the expense & hassle of running specialized cables. The extender also features an EDID copy function, which ensures native resolution & maximum compatibility with your display or projector for a convenient plug-&-play installation.\n\n Download the Star Tech.com Video Control software to manage your IP video distribution.\n\n Note: If using more than 1 Transmitter, or more than 4 Receivers an IGMP / Managed Network Switch is recommended for optimal performance. Non-managed network switches may also limit the performance of other devices connected to the same network.\n\n The ST12MHDLAN is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type AV transmitter & receiver Maximum resolution 1920 x 1200 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 100 m Audio system Stereo LED indicators Link, Power, Reset Supported video modes 720p, 1080p Supported graphics resolutions 1920 x 1200 (WUXGA) Material Aluminium Daisy chain Y Product colour Black Ro HS compliance Y Certification CE, FCCWi-Fi N Bluetooth N Ethernet LANYRJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 1AC input voltage 100-240 VOperating voltage 5 VInput current 0.4 AOutput current 2 APower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 97 mm Depth 130 mm Height 28 mm Weight 448 g Receiver

Dimensions (W x D x H)97 x 130 x 28 mm Receiver weight 448 g Transmitter

Dimensions (Wx Dx H)97 x 130 x 28 mm Transmitter weight 448 g Package

Dimensions (Wx Dx H)240 x 295 x 85 mm Package weight 1.9kg AC adapter included Y Manual Y Handheld remote control N Mounting brackets included Y










...

The HDMI&174; over IP kit lets you extend an HDMI signal over your network. You can use additional receivers (sold separately) to distribute the HDMI signal to multiple locations & combine your remote displays to create a video wall.\n\n Versatile configuration options\n In a point-to-multipoint setup, the HDMI over IP kit can be connected through an unmanaged or managed Gigabit LAN portal. You can connect one or multiple sources (transmitters) to multiple displays (receivers) over IP, using a managed Gigabit Ethernet switch (with IGMP). For additional scalability, you can combine up to 16 different kits.\n\n For smaller-scale applications, the extender kit can be used as a point-to-point video extender. You can connect the transmitter & receiver units directly over Cat 5 or Cat 6 cabling for a small-scale, one-to-one HDMI extension up to 330 feet (100 meters).\n\n Manage your video distribution from your mobile device\n The HDMI distribution kit features easy-to-use video control software that helps you manage your IP video distribution. The app is simple to set up with automatic hardware detection, & lets you switch video sources for each remote display. You can also intuitively create & manage a video wall for an impressive digital signage presentation to catch the attention of your audience.\n\n Professional, cost-effective, simple installation\n The HDMI over IP extender kit

Includes:: optional mounting hardware for a tidy installation. Ideal for high-definition applications, the extender supports 1080p video resolutions & digital stereo audio. Plus, because the extender uses standard non-proprietary Cat 5e or Cat 6 Ethernet cable with RJ45 connectors, it eliminates both the expense & hassle of running specialized cables. The extender also features an EDID copy function, which ensures native resolution & maximum compatibility with your display or projector for a convenient plug-&-play installation.\n\n Download the Star Tech.com Video Control software to manage your IP video distribution.\n\n Note: If using more than 1 Transmitter, or more than 4 Receivers an IGMP / Managed Network Switch is recommended for optimal performance. Non-managed network switches may also limit the performance of other devices connected to the same network.\n\n The ST12MHDLAN is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type AV transmitter & receiver Maximum resolution 1920 x 1200 pixels Cable types supported Cat 5e, Cat 6 Maximum transfer distance 100 m Audio system Stereo LED indicators Link, Power, Reset Supported video modes 720p, 1080p Supported graphics resolutions 1920 x 1200 (WUXGA) Material Aluminium Daisy chain Y Product colour Black Ro HS compliance Y Certification CE, FCCWi-Fi N Bluetooth N Ethernet LANYRJ-45 input ports 1RJ-45 output ports 1HDMI in 1 Number of HDMI outputs 1AC input voltage 100-240 VOperating voltage 5 VInput current 0.4 AOutput current 2 APower plug type Type MOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 60 &176;COperating relative humidity (H-H)0
- 80% Width 97 mm Depth 130 mm Height 28 mm Weight 448 g Receiver

Dimensions (W x D x H)97 x 130 x 28 mm Receiver weight 448 g Transmitter

Dimensions (Wx Dx H)97 x 130 x 28 mm Transmitter weight 448 g Package

Dimensions (Wx Dx H)240 x 295 x 85 mm Package weight 1.9kg AC adapter included Y Manual Y Handheld remote control N Mounting brackets included Y










...