Make 10 Gb Ethernet connections with Po E support\n\n This 14-foot Cat 6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10 Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) & system noise, providing the perfect solution for fast & safe network connections.\n\n Reliable Cat 6a 10 Gigabit connections\n\n Each cable is tested for up to 500 MHz frequency & is more than suitable for 10 G Base-T Ethernet networks.\n\n Constructed with 100% copper & foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference & is perfect in environments that are prone to large amount of EMI.\n\n The 50-micron gold connectors deliver optimum conductivity & eliminate signal loss due to oxidation or corrosion.\n\n Secured network connections\n\n For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.\n\n Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.\n\n The C6ASPAT14GR is backed by Star Tech.com&153;s lifetime warranty for guaranteed reliability.\n\n The Star Tech.com Advantage\n\n- Protect your data against noise & EMI/RFI interference\n- Prevent cable damage with molded RJ45 connectors that also offer strain relief\n- Create secured connections with snagless clips that protect the connectors during installation Feature Feature Value Cable length 4.3 m Cable standard Cat 6a Cable shielding U/FTP (STP) Connector 1RJ-45 Connector 2RJ-45 Cable colour Grey Connector gender Male connector / Male connector Connector contacts plating Copper Jacket material Polyvinyl chloride (PVC) Conductor type Stranded Cable rating CMG (CM) Cabling technology 10 G Base-TAWG wire size 26 Data transfer rate 10000 Mbit/s Frequency 500 MHz Snagless cable boot Y Plug & Play Y Ro HS compliance Y Quantity per pack 1 pc (s) Package width 30 mm Package depth 195 mm Package height 210 mm Package weight 200 g ...

Make 10 Gb Ethernet connections with Po E support\n\n This 14-foot Cat 6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10 Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) & system noise, providing the perfect solution for fast & safe network connections.\n\n Reliable Cat 6a 10 Gigabit connections\n\n Each cable is tested for up to 500 MHz frequency & is more than suitable for 10 G Base-T Ethernet networks.\n\n Constructed with 100% copper & foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference & is perfect in environments that are prone to large amount of EMI.\n\n The 50-micron gold connectors deliver optimum conductivity & eliminate signal loss due to oxidation or corrosion.\n\n Secured network connections\n\n For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.\n\n Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.\n\n The C6ASPAT14GR is backed by Star Tech.com&153;s lifetime warranty for guaranteed reliability.\n\n The Star Tech.com Advantage\n\n- Protect your data against noise & EMI/RFI interference\n- Prevent cable damage with molded RJ45 connectors that also offer strain relief\n- Create secured connections with snagless clips that protect the connectors during installation Feature Feature Value Cable length 4.3 m Cable standard Cat 6a Cable shielding U/FTP (STP) Connector 1RJ-45 Connector 2RJ-45 Cable colour Grey Connector gender Male connector / Male connector Connector contacts plating Copper Jacket material Polyvinyl chloride (PVC) Conductor type Stranded Cable rating CMG (CM) Cabling technology 10 G Base-TAWG wire size 26 Data transfer rate 10000 Mbit/s Frequency 500 MHz Snagless cable boot Y Plug & Play Y Ro HS compliance Y Quantity per pack 1 pc (s) Package width 30 mm Package depth 195 mm Package height 210 mm Package weight 200 g ...

Extend your VGA/multisync video cables by up to 425 feet (130 meters) with this high quality video extender. The ST121UTPGB is an excellent solution for remote monitor displays. To use multiple ST121UTPGBs from a single video source, pair them with one of Star Tech.com's video splitters listed under the accessory products tab. ...

These large cable tie mounts with adhesive backing enable you to conveniently mount your zip ties to secure your cable bundle to the wall or ceiling, to route & organize them. 100 White cable tie mounts are included, ensuring you'll have plenty on h&.\n\n Easy to Install & Use\n These plastic electrical cable wrap mounts work with cable ties up to 0.21 in. (5.5 mm) in width, at any length.\n\n They're quick & easy to install, simply peel off the protective backing & stick it to your desired location on any surface, including plastic, metal, drywall, wood, or masonry. Once the mount is in place, you can feed the cable tie through the slot, position your cable bundle inside the tie & close the cable tie to secure both the cable bundle & the cable tie to the mount. For added security on heavier cable bundles a built-in mounting hole (5 mm in diameter) enables you further secure the mount with a screw.\n\n This clean & professional cable tie mounting system is perfect for organizing & routing network cables, power cables, or other cables in your office or server room.\n Industrial Strength\n\n Made of durable Nylon 66 material & featuring a strong 3M adhesive sticky backing these cable tie mounts are UL94 V-2 fire rated, & UL Approved.\n\n\n\n Product ID: CBMCTM3\n\n\n\n\n\n Model: CBMCTM3\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644395_1598891255_1829_30541.pdf\n\n\n\n\n\n\n\n\n\n\n\n ...

This 20-pack of raceway T-bars works with the Star Tech.com CBMWWD1911 raceway system.\n T-Branch Three Raceways Together at 90 Degree Angles\n\n Use these cable raceway T-bars with the Star Tech.com CBMWWD1911 raceway to join three of them together & make a right-angle T-branch in your office or server room.\n Industrial Strength\n\n Made from sturdy self-extinguishing ABS that's also warp proof, these wiring duct connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating.\n Use in Combination with Other Raceway Accessories\n\n Combine this coupler with other Star Tech.com CBMWWD1911 raceway system accessories to give your cable management solution a finished look.\n\n\n\n Product ID: CBMWWD1911T\n\n\n\n\n\n Model: CBMWWD1911T\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644518_1599468506_4202_30003.pdf\n\n\n\n\n\n\n\n\n\n\n\n ...

Display Ceiling Mount &pipe; Full Motion &pipe; For 32" to 75" Displays\n\n This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area.\n\n The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places.\n\n Adjustable Height\n\n With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 22" to 33.5" (560 to 910 mm), with a total lift (height extension) of 13.7" (350 mm).\n\n Swivels to Suit Your Ceiling\n\n The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings.\n\n Viewable from Any Direction\n\n You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.\n\n Hook-&-Mount Design\n\n Simply attach the included vertical brackets, with built-in hooks, to the back of your TV. Once attached, hang your TV securely onto the ceiling mount. The preset leveling adjustments ensure ideal positioning after hanging.\n\n FPCEILPTBSP is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space by suspending your 32 to 75" flat-screen TV from the ceiling\n- Min-max pole length extension of 22.0" to 35.8" (560 to 910 mm)\n- Ceiling TV mount swivels +60 /-60 degrees to adjust to sloped or level ceilings Feature Feature Value Maximum weight capacity 50kg Maximum screen size compatibility 190.5 cm (75") Minimum screen size compatibility 94 cm (37") Suitable for Computer monitor / TVMinimum VESA mount 200 x 200 mm Maximum VESA mount 600 x 400 mm Number of displays supported 1 Panel mounting interface 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400 Height adjustment Y Height adjustment range 560
- 910 mm Tilt angle range-25
- 0&176; Swivel angle range-180
- 180&176; Angle of rotation 360&176; Pivot angle-180
- 180&176; Product colour Black Housing material Steel Cord management Y Certification Ro HSWidth 435 mm Depth 680 mm Height 1150 mm Weight 4.9kg Package

Dimensions (Wx Dx H)366 x 771 x 149 mm Package weight 6.8kg Mounting kit Y Manual Y Extension pole included Y Mounting brackets included Y Number of mounting brackets 3 Bolts included Y Number of bolts 2 Screw nuts included Y Number of screw nuts 2 Wrench included Y Number of wrenches included 1 Hex key included Y Number of hex keys inlcluded 1 Screws included Y Number of screws 24 Washers included Y Number of washers included 8 Spacer included Y Number of spacers included 8 Anchors included Y Number of anchors included 4






...

Display Ceiling Mount &pipe; Full Motion &pipe; For 32" to 75" Displays\n\n This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area.\n\n The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places.\n\n Adjustable Height\n\n With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 22" to 33.5" (560 to 910 mm), with a total lift (height extension) of 13.7" (350 mm).\n\n Swivels to Suit Your Ceiling\n\n The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings.\n\n Viewable from Any Direction\n\n You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.\n\n Hook-&-Mount Design\n\n Simply attach the included vertical brackets, with built-in hooks, to the back of your TV. Once attached, hang your TV securely onto the ceiling mount. The preset leveling adjustments ensure ideal positioning after hanging.\n\n FPCEILPTBSP is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space by suspending your 32 to 75" flat-screen TV from the ceiling\n- Min-max pole length extension of 22.0" to 35.8" (560 to 910 mm)\n- Ceiling TV mount swivels +60 /-60 degrees to adjust to sloped or level ceilings Feature Feature Value Maximum weight capacity 50kg Maximum screen size compatibility 190.5 cm (75") Minimum screen size compatibility 94 cm (37") Suitable for Computer monitor / TVMinimum VESA mount 200 x 200 mm Maximum VESA mount 600 x 400 mm Number of displays supported 1 Panel mounting interface 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400 Height adjustment Y Height adjustment range 560
- 910 mm Tilt angle range-25
- 0&176; Swivel angle range-180
- 180&176; Angle of rotation 360&176; Pivot angle-180
- 180&176; Product colour Black Housing material Steel Cord management Y Certification Ro HSWidth 435 mm Depth 680 mm Height 1150 mm Weight 4.9kg Package

Dimensions (Wx Dx H)366 x 771 x 149 mm Package weight 6.8kg Mounting kit Y Manual Y Extension pole included Y Mounting brackets included Y Number of mounting brackets 3 Bolts included Y Number of bolts 2 Screw nuts included Y Number of screw nuts 2 Wrench included Y Number of wrenches included 1 Hex key included Y Number of hex keys inlcluded 1 Screws included Y Number of screws 24 Washers included Y Number of washers included 8 Spacer included Y Number of spacers included 8 Anchors included Y Number of anchors included 4






...

Display Ceiling Mount &pipe; Full Motion &pipe; For 32" to 75" Displays\n\n This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area.\n\n The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places.\n\n Adjustable Height\n\n With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 22" to 33.5" (560 to 910 mm), with a total lift (height extension) of 13.7" (350 mm).\n\n Swivels to Suit Your Ceiling\n\n The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings.\n\n Viewable from Any Direction\n\n You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.\n\n Hook-&-Mount Design\n\n Simply attach the included vertical brackets, with built-in hooks, to the back of your TV. Once attached, hang your TV securely onto the ceiling mount. The preset leveling adjustments ensure ideal positioning after hanging.\n\n FPCEILPTBSP is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space by suspending your 32 to 75" flat-screen TV from the ceiling\n- Min-max pole length extension of 22.0" to 35.8" (560 to 910 mm)\n- Ceiling TV mount swivels +60 /-60 degrees to adjust to sloped or level ceilings Feature Feature Value Maximum weight capacity 50kg Maximum screen size compatibility 190.5 cm (75") Minimum screen size compatibility 94 cm (37") Suitable for Computer monitor / TVMinimum VESA mount 200 x 200 mm Maximum VESA mount 600 x 400 mm Number of displays supported 1 Panel mounting interface 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400 Height adjustment Y Height adjustment range 560
- 910 mm Tilt angle range-25
- 0&176; Swivel angle range-180
- 180&176; Angle of rotation 360&176; Pivot angle-180
- 180&176; Product colour Black Housing material Steel Cord management Y Certification Ro HSWidth 435 mm Depth 680 mm Height 1150 mm Weight 4.9kg Package

Dimensions (Wx Dx H)366 x 771 x 149 mm Package weight 6.8kg Mounting kit Y Manual Y Extension pole included Y Mounting brackets included Y Number of mounting brackets 3 Bolts included Y Number of bolts 2 Screw nuts included Y Number of screw nuts 2 Wrench included Y Number of wrenches included 1 Hex key included Y Number of hex keys inlcluded 1 Screws included Y Number of screws 24 Washers included Y Number of washers included 8 Spacer included Y Number of spacers included 8 Anchors included Y Number of anchors included 4






...

Display Ceiling Mount &pipe; Full Motion &pipe; For 32" to 75" Displays\n\n This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area. \n\n The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places.\n\n Adjustable Height\n\n With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 42" to 61" (1060 to 1560 mm), with a total lift (height extension) of 19.7" (500 mm).\n\n Swivels to Suit Your Ceiling\n\n The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings.\n\n Viewable from Any Direction\n\n You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.\n\n Hook-&-Mount Design\n\n Simply attach the included vertical brackets, with built-in hooks, to the back of your TV. Once attached, hang your TV securely onto the ceiling mount. The preset leveling adjustments ensure ideal positioning after hanging.\n\n FLATPNLCEIL is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space by suspending your 32 to 75" flat-screen TV from the ceiling\n- Min-max pole length extension of 42" to 61" (1060 to 1560 mm)\n- Ceiling TV mount swivels +60 /-60 degrees to adjust to sloped or level ceilings Feature Feature Value Maximum weight capacity 50kg Maximum screen size compatibility 190.5 cm (75") Minimum screen size compatibility 81.3 cm (32") Suitable for TVMinimum VESA mount 200 x 200 mm Maximum VESA mount 600 x 400 mm Number of displays supported 1 Panel mounting interface 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400 Height adjustment Y Height adjustment range 1060
- 1560 mm Tilt angle range-25
- 0&176; Swivel angle range-180
- 180&176; Angle of rotation 360&176; Pivot angle-180
- 180&176; Adjustable Y Product colour Black Housing material Steel Certification Ro HSWidth 140 mm Depth 680 mm Height 1800 mm Weight 6kg Package

Dimensions (Wx Dx H)942 x 312 x 146 mm Package weight 7.8kg Manual Y Extension pole included Y Mounting brackets included Y Number of mounting brackets 3 Bolts included Y Number of bolts 2 Screw nuts included Y Number of screw nuts 2 Wrench included Y Number of wrenches included 1 Hex key included Y Number of hex keys inlcluded 1 Screws included Y Number of screws 24 Washers included Y Number of washers included 4 Spacer included Y Number of spacers included 16 Anchors included Y Number of anchors included 4






...

Display Ceiling Mount &pipe; Full Motion &pipe; For 32" to 75" Displays\n\n This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area. \n\n The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places.\n\n Adjustable Height\n\n With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 42" to 61" (1060 to 1560 mm), with a total lift (height extension) of 19.7" (500 mm).\n\n Swivels to Suit Your Ceiling\n\n The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings.\n\n Viewable from Any Direction\n\n You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.\n\n Hook-&-Mount Design\n\n Simply attach the included vertical brackets, with built-in hooks, to the back of your TV. Once attached, hang your TV securely onto the ceiling mount. The preset leveling adjustments ensure ideal positioning after hanging.\n\n FLATPNLCEIL is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space by suspending your 32 to 75" flat-screen TV from the ceiling\n- Min-max pole length extension of 42" to 61" (1060 to 1560 mm)\n- Ceiling TV mount swivels +60 /-60 degrees to adjust to sloped or level ceilings Feature Feature Value Maximum weight capacity 50kg Maximum screen size compatibility 190.5 cm (75") Minimum screen size compatibility 81.3 cm (32") Suitable for TVMinimum VESA mount 200 x 200 mm Maximum VESA mount 600 x 400 mm Number of displays supported 1 Panel mounting interface 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400 Height adjustment Y Height adjustment range 1060
- 1560 mm Tilt angle range-25
- 0&176; Swivel angle range-180
- 180&176; Angle of rotation 360&176; Pivot angle-180
- 180&176; Adjustable Y Product colour Black Housing material Steel Certification Ro HSWidth 140 mm Depth 680 mm Height 1800 mm Weight 6kg Package

Dimensions (Wx Dx H)942 x 312 x 146 mm Package weight 7.8kg Manual Y Extension pole included Y Mounting brackets included Y Number of mounting brackets 3 Bolts included Y Number of bolts 2 Screw nuts included Y Number of screw nuts 2 Wrench included Y Number of wrenches included 1 Hex key included Y Number of hex keys inlcluded 1 Screws included Y Number of screws 24 Washers included Y Number of washers included 4 Spacer included Y Number of spacers included 16 Anchors included Y Number of anchors included 4






...