39.37 in. (1 m) &pipe; Adhesive Tape &pipe; Self-Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 39 in. (1 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.43 in. (11 mm) x 1.26 in. (32 mm).\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Give Your Raceway a Finished Look with these Accessories\n\n To combine & route this cable management raceway & cap off the ends, Star Tech.com offers a wide selection raceway accessories.\n\n The Coupler (CBMWWD3211C) (20-Pack), joins two raceways together & extends the length of your raceway.\n\n The End Piece (CBMWWD3211E) (20-Pack), cleanly caps off the end of your raceway.\n\n The Inside Elbow (CBMWWD3211I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.\n\n The Lateral Elbow (CBMWWD3211L) (20-Pack), joins two raceways together & runs them up the wall at a 90 degree angle.\n\n The Outside Elbow (CBMWWD3211O) (20-Pack), joins two raceways together around corners at a 90 degree angle.\n\n The T Connector (CBMWWD3211T) (20 Pack), joins three raceways together in a T-bar.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway protect upto 12 cables from damage/debris w/closed design, route them in office/server room install using screw holes/double sided tape\n- INDUSTRIAL STRENGTH: Sturdy warp-proof, self extinguishing PVC, solid network/power cable hider/concealer is M1 Rating NF fire resistant w/186F Vicat softening point; UL 94V-0 Rated; UL/CSA approved\n- RACEWAY ACCESSORIES: Coupler (CBMWWD3211C), End Piece (CBMWWD3211E), Inside Elbow (CBMWWD3211I), Lateral Elbow (CBMWWD3211L), Outside Elbow (CBMWWD3211O), T Connector (CBMWWD3211T); sold separately\n\n\n\n Product ID: CBMWWD3211\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 39in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644488_1599468129_6728_25627.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

39.37 in. (1 m) &pipe; Adhesive Tape &pipe; Self Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 39 in. (1 m) cable management raceway with adhesive tape neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.43 in. (11 mm) x 0.75 in. (19 mm).\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n Give Your Raceway a Finished Look with these Accessories\n\n To combine & route this cable management raceway & cap off the ends, Star Tech.com offers a wide selection of raceway accessories.\n\n The Coupler (CBMWWD1911C) (20-Pack), joins two raceways together & extends the length of your raceway.\n\n The End Piece (CBMWWD1911E) (20-Pack), cleanly caps off the end of your raceway.\n\n The Inside Elbow (CBMWWD1911I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.\n\n The Lateral Elbow (CBMWWD1911L) (20-Pack), joins two raceways together & runs them up the wall at a 90 degree angle.\n\n The Outside Elbow (CBMWWD1911O) (20-Pack), joins two raceways together around corners at a 90 degree angle.\n\n The T Connector (CBMWWD1911T) (20-Pack), joins three raceways together in a T-bar.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway protect upto 6 cables from damage/debris w/closed design & route them in office/server room install using screw holes/double sided tape\n- INDUSTRIAL STRENGTH: Sturdy warp-proof, self extinguishing PVC, solid network/power cable hider/concealer is M1 Rating NF fire resistant w/186F Vicat softening point; UL 94V-0 Rated; UL/CSA approved\n- RACEWAY ACCESSORIES: Coupler (CBMWWD1911C), End Piece (CBMWWD1911E), Inside Elbow (CBMWWD1911I), Lateral Elbow (CBMWWD1911L), Outside Elbow (CBMWWD1911O), T Connector (CBMWWD1911T); sold separately\n\n\n\n Product ID: CBMWWD1911\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 39in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Power Cord Concealer
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644466_1599229775_4368_18267.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

78 in. (2 m) &pipe; Self-Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 78 in. (2 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.77 in. (19.6 mm) x 1.25 in. (31.8 mm). The raceway also features a durable one-piece design that opens on one side, enabling you to easily add or remove cables without the hassle of removing the raceway cover/lid.\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway with solid closed design to protect cables from damage/dust/debris & neatly routes them in your office or server room\n- INDUSTRIAL STRENGTH: Made from sturdy warp-proof, self extinguishing PVC, this network/power cable hider/concealer is M1 Rating NF fire resistant w/ 186F (86C) Vicat softening point; UL/94V-0 Rated\n- FLEXIBLE DESIGN: Easily add or remove cables to your cable run with the simple cover latch mechanisim / Stick to any surface using the attached adhesive tape or by drilling holes through the base\n\n\n\n Product ID: CBMOWD3220\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 78in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644389_1599224794_117_25949.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

This 72 in. (1.83m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.54 in. (13.8 mm) x 0.76 in. (19.5 mm). The raceway also features a durable one-piece design that opens on one side, enabling you to easily add or remove cables without the hassle of removing the raceway cover/lid.\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n\n\n Product ID: CBMOWD2013\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 78in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644388_1599224768_3516_23181.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

This 78 in. (2 m) slotted cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n Professionally Organize & Route Cables with Slotted Design\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 3.94 in. (100mm) x 2.95 in (75mm), with 0.31 in. (8 mm) parallel slots (finger ducts) to pull cords through so you can easily organize & route cables in & out of the raceway.\n Hassle-Free Installation\n\n The raceway features mounting holes (15mm x 5mm) that enable you to easily mount the raceway to wood or drywall using screws (not included).\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n\n\n Product ID: CBMWD75100\n\n\n\n\n\n Model: Cable Management Raceway w/ Parallel Slots 78in
- Network Cable Hider Kit
- Slotted Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644444_1599229583_1419_15950.pdf\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_80644444_1599229578_4097_18869.pdf\n\n\n\n\n\n\n\n\n\n



...

Connect a 1.8 inch Micro SATA drive to a regular SATA controller. Star Tech.com's MCSATAF12S 12in Micro SATA to SATA adapter cable features a standard female SATA data connector & a SATA male power connector on one end, & a micro SATA female connector on the other, letting you connect a 1.8in SSD (Solid State Drive) to a computer as you would a standard SATA form factor hard drive. The Micro SATA/SATA adapter supports both 3.3V & 5V SSD Drives, & is backed by lifetime warranty. " * means that you can connect a 1.8in SSD (Solid State Drive) to a computer in the same way you would a standard SATA form factor hard drive * Easy to use & install * Backed by Star Tech.com's lifetime warranty" ...

A space-saving, right angle SATA hard drive cable, for installations in tight spaces. This right angled SATA cable features a standard (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple 18in connection to a Serial ATA drive even if space near the drive's SATA port is limited. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point
- an ideal solution for small or micro form factor computer cases. The right angled SATA cable features a thin, narrow construction that helps to improve airflow within the computer case; the cable also features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, & is backed by Star Tech.com's Lifetime Warranty. As an alternative, Star Tech.com also offers an 18in Left Angle SATA cable (SATA18LA1), which offers the same simple installation as this right angled SATA cable, but allows the cable to connected to the SATA drive from the opposite direction. " * Fast & easy way to connect Serial ATA/150 hard drives to a motherboard * Thinner & more flexible Serial ATA cable is easier to connect inside the system & improves airflow * Provides a fast data transfer rate of up to 6 Gbps * Right angled cable connector easily fits in hard to reach areas & tight space"
...

The CABSHELF1U 1U (Black) Universal Fixed Server Rack Cabinet Shelf lets you add a compact fixed storage shelf to any standard 19-inch server rack or cabinet with front mount options. Constructed using SPCC commercial grade cold-rolled steel, this durable fixed rack shelf can hold up to 15kg (33lbs) of equipment
- a perfect solution for storing small form non-rackmount equipment, tools, peripherals or accessories in your rack, to keep them readily accessible. Backed by a Star Tech.com 2-year warranty. Features
- Fits all standard 19" server racks.
- Holds up to 15kg (33lbs).
- SPCC 1.6mm Cold-rolled steel construction.
- Front mount design. Applications
- Adding a storage shelf to shallow depth network switches/equipment racks.
- Supply additional storage space for mission critical hardware & non-rack mount equipment.
- For use with all 19" wide Server Racks & Cabinets. The Star Tech.com Advantage
- Very compact form factor makes it absolutely ideal for any wallmount server rack, & even network switching racks.
- Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.
- Durable steel construction holds up to even the harshest industrial environments.










...

Add mobility to your 4POSTRACK series open frame server rack with these heavy duty casters\n\n This set of four casters allow you to move & adjust the position of your rack to suit your needs. The casters connect to the bottom of any rack with 42 mm x 55 mm caster mounting holes such as our:\n\n 12U Adjustable 4-Post Rack (4POSTRACK12)\n\n 25U Adjustable 4-Post Rack (4POSTRACK25)\n\n 36U Adjustable 4-Post Rack (4POSTRACK36)\n\n 42U Adjustable 4-Post Rack (4POSTRACKBK)\n\n 12U Rack Enclosure Server Cabinet (RKQMCAB12)\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n 4POSTCASTER is backed by a Star Tech.com lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Max load capacity of 50kg (110 lbs) per caster, total of 200kg (440 lbs)\n-

Includes:: all hardware required for installation\n- TAA compliant for GSA Schedule purchases Feature Feature Value Type Castor wheels Product colour Black, Stainless steel Ro HS compliance Y Certification TAA, CE, REACHHeight 87 mm Weight 1.6kg Quantity per pack 4 pc (s) Package width 84 mm Package depth 95 mm Package height 39 mm Package weight 1.8kg Screws included Y Number of screws 16

...

Add mobility to your 4POSTRACK series open frame server rack with these heavy duty casters\n\n This set of four casters allow you to move & adjust the position of your rack to suit your needs. The casters connect to the bottom of any rack with 42 mm x 55 mm caster mounting holes such as our:\n\n 12U Adjustable 4-Post Rack (4POSTRACK12)\n\n 25U Adjustable 4-Post Rack (4POSTRACK25)\n\n 36U Adjustable 4-Post Rack (4POSTRACK36)\n\n 42U Adjustable 4-Post Rack (4POSTRACKBK)\n\n 12U Rack Enclosure Server Cabinet (RKQMCAB12)\n\n This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n 4POSTCASTER is backed by a Star Tech.com lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Max load capacity of 50kg (110 lbs) per caster, total of 200kg (440 lbs)\n-

Includes:: all hardware required for installation\n- TAA compliant for GSA Schedule purchases Feature Feature Value Type Castor wheels Product colour Black, Stainless steel Ro HS compliance Y Certification TAA, CE, REACHHeight 87 mm Weight 1.6kg Quantity per pack 4 pc (s) Package width 84 mm Package depth 95 mm Package height 39 mm Package weight 1.8kg Screws included Y Number of screws 16

...