Latching SATA connectors, for securely fastened hard drive installations. This high quality Serial ATA cable is specifically designed for connecting SATA drives even in tight spaces. Featuring convenient latching connectors, this SATA cable provides secured connections for SATA hard drives & motherboards that support this feature. With a thin, narrow construction, this flexible 12 cable helps improve airflow & reduce clutter in your computer case, in turn keeping your case clean & cool. Star Tech.com Latching SATA Cables are expertly designed & constructed of high quality materials to ensure durability, & are backed by our Lifetime Warranty." " * A cost-effective solution for creating secure SATA drive connections in tight spaces * Easy to use & install * Backed by Star Tech.com's lifetime warranty" ...

Power two devices at once from a single power outlet, perfect for dual-monitor setups\n\n Maximize the outlets on your power strip, surge protector or wall outlet & free up space for other devices. This C13 power cord lets you plug two devices into a single power outlet.\n\n The cord length from the Y-split is 50 cm on each side, giving you an extended reach for securely connecting your devices. You can power two monitors, or a monitor & a computer, or two switches in a rack, without placing strain on the cord.\n\n The C13 power cord is fully tested to ensure maximum performance.\n\n PXT101YEU2M is backed by a Star Tech.com lifetime warranty for guaranteed reliability.\n\n The Star Tech.com Advantage\n\n- Provide a connection distance of up to 1 meter between both devices\n- Maximize space on your power strip, surge protector or wall outlet\n- Guaranteed reliability with a lifetime warranty Feature Feature Value Cable colour Black Connector gender Male connector / Female connector Cable length 2 m Connector 1CEE7/7 Connector 22 x C13 coupler Connector 1 standard CEE 7/7 Connector 2 standard IEC 60320 Connector 1 form factor Angled Connector 2 form factor Straight Connector angle 90&176; Jacket material Polyvinyl chloride (PVC) Number of conductors 3 Core size 0.75 mm&178; Ro HS compliance Y Input voltage 250 VInput current 10 AWidth 12 mm Depth 2000 mm Height 10 mm Weight 295 g Quantity per pack 1 pc (s) Package width 210 mm Package depth 290 mm Package height 145 mm Package weight 295 g Operating temperature (T-T)-20
- 60 &176;CStorage temperature (T-T)-20
- 60 &176;COperating relative humidity (H-H)20
- 80%


...

Power two devices at once from a single power outlet, perfect for dual-monitor setups\n\n Maximize the outlets on your power strip, surge protector or wall outlet & free up space for other devices. This C13 power cord lets you plug two devices into a single power outlet.\n\n The cord length from the Y-split is 50 cm on each side, giving you an extended reach for securely connecting your devices. You can power two monitors, or a monitor & a computer, or two switches in a rack, without placing strain on the cord.\n\n The C13 power cord is fully tested to ensure maximum performance.\n\n PXT101YEU2M is backed by a Star Tech.com lifetime warranty for guaranteed reliability.\n\n The Star Tech.com Advantage\n\n- Provide a connection distance of up to 1 meter between both devices\n- Maximize space on your power strip, surge protector or wall outlet\n- Guaranteed reliability with a lifetime warranty Feature Feature Value Cable colour Black Connector gender Male connector / Female connector Cable length 2 m Connector 1CEE7/7 Connector 22 x C13 coupler Connector 1 standard CEE 7/7 Connector 2 standard IEC 60320 Connector 1 form factor Angled Connector 2 form factor Straight Connector angle 90&176; Jacket material Polyvinyl chloride (PVC) Number of conductors 3 Core size 0.75 mm&178; Ro HS compliance Y Input voltage 250 VInput current 10 AWidth 12 mm Depth 2000 mm Height 10 mm Weight 295 g Quantity per pack 1 pc (s) Package width 210 mm Package depth 290 mm Package height 145 mm Package weight 295 g Operating temperature (T-T)-20
- 60 &176;CStorage temperature (T-T)-20
- 60 &176;COperating relative humidity (H-H)20
- 80%


...

Connect a front panel USB (Universal Serial Bus) hub or card reader directly to a motherboard header. This 18in internal USB (Universal Serial Bus) IDC cable features two 5-pin USB (Universal Serial Bus) motherboard header connectors, allowing you to connect a front panel USB (Universal Serial Bus) hub or card reader directly to the motherboard header ports. This cable provides a solution for connecting multi-function front panels, or any device that relies on internal USB (Universal Serial Bus) ports, directly to the motherboard or expansion card offering USB (Universal Serial Bus) an IDC (Header) connection without having to install additional cards, or run cables externally to the rear ports. Constructed of high quality materials & expertly constructed for durable performance, the 18in Internal IDC USB (Universal Serial Bus) 5-pin Motherboard Header Cable is backed by Star Tech.com's Lifetime Warranty. " * Easy installation * Backed by Star Tech.com lifetime warranty" ...

This 78 in. (2 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.63 in. (16 mm) x 1.49 in. (38 mm).\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n Hassle-Free Installation\n\n The cable raceway can be mounting by simply drilling holes through housing & into any surface, or double sided tape can used to secure the raceway (screws & tape not included).\n\n\n\n Product ID: CBMWD3816\n\n\n\n\n\n Model: Cable Management Raceway 78in
- Single Channel Network Cable Hider Kit
- Solid Wall Wire Duct System
- Power Cord Concealer
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644501_1599226863_0254_26970.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

This 20 in. (50 cm) flexible cable management spine/vertebrae raceway offers a flexible solution for neatly routing cables at your workstation to create a tidy & professional look.\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them. The raceway is 0.98 in. (24.9 mm) x 1.4 in. (29 mm). Featuring individual loops that makes it easy to add, remove & organize cables within the raceway.\n Easily Expandable with Built-in Connectors\n\n The built-in raceway connectors make it easy to create long cable runs by latching several raceways together. Each raceway features mating connectors at each end, enabling you customize the length of the raceway to meet your specific application.\n Hassle-Free Installation\n\n The raceway features 0.48 in. (12.2 mm) x 0.18 in. (4.6 mm) mounting holes that enable you to easily mount the raceway to wood or drywall using screws (not included).\n Industrial Strength\n\n Made from durable Nylon 66 this network/power cable router/organizer is flexible & UL/94V-2 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n\n\n Product ID: CBMFWD2030\n\n\n\n\n\n Model: Cable Management Raceway Spine Vertebrae 20in
- Network Cable Hider Kit
- Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644449_1599223986_3786_25326.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

39.37 in. (1 m) &pipe; Adhesive Tape &pipe; Self-Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 39 in. (1 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.43 in. (11 mm) x 1.26 in. (32 mm).\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Give Your Raceway a Finished Look with these Accessories\n\n To combine & route this cable management raceway & cap off the ends, Star Tech.com offers a wide selection raceway accessories.\n\n The Coupler (CBMWWD3211C) (20-Pack), joins two raceways together & extends the length of your raceway.\n\n The End Piece (CBMWWD3211E) (20-Pack), cleanly caps off the end of your raceway.\n\n The Inside Elbow (CBMWWD3211I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.\n\n The Lateral Elbow (CBMWWD3211L) (20-Pack), joins two raceways together & runs them up the wall at a 90 degree angle.\n\n The Outside Elbow (CBMWWD3211O) (20-Pack), joins two raceways together around corners at a 90 degree angle.\n\n The T Connector (CBMWWD3211T) (20 Pack), joins three raceways together in a T-bar.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway protect upto 12 cables from damage/debris w/closed design, route them in office/server room install using screw holes/double sided tape\n- INDUSTRIAL STRENGTH: Sturdy warp-proof, self extinguishing PVC, solid network/power cable hider/concealer is M1 Rating NF fire resistant w/186F Vicat softening point; UL 94V-0 Rated; UL/CSA approved\n- RACEWAY ACCESSORIES: Coupler (CBMWWD3211C), End Piece (CBMWWD3211E), Inside Elbow (CBMWWD3211I), Lateral Elbow (CBMWWD3211L), Outside Elbow (CBMWWD3211O), T Connector (CBMWWD3211T); sold separately\n\n\n\n Product ID: CBMWWD3211\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 39in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644488_1599468129_6728_25627.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

39.37 in. (1 m) &pipe; Adhesive Tape &pipe; Self Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 39 in. (1 m) cable management raceway with adhesive tape neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.43 in. (11 mm) x 0.75 in. (19 mm).\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n Give Your Raceway a Finished Look with these Accessories\n\n To combine & route this cable management raceway & cap off the ends, Star Tech.com offers a wide selection of raceway accessories.\n\n The Coupler (CBMWWD1911C) (20-Pack), joins two raceways together & extends the length of your raceway.\n\n The End Piece (CBMWWD1911E) (20-Pack), cleanly caps off the end of your raceway.\n\n The Inside Elbow (CBMWWD1911I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.\n\n The Lateral Elbow (CBMWWD1911L) (20-Pack), joins two raceways together & runs them up the wall at a 90 degree angle.\n\n The Outside Elbow (CBMWWD1911O) (20-Pack), joins two raceways together around corners at a 90 degree angle.\n\n The T Connector (CBMWWD1911T) (20-Pack), joins three raceways together in a T-bar.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway protect upto 6 cables from damage/debris w/closed design & route them in office/server room install using screw holes/double sided tape\n- INDUSTRIAL STRENGTH: Sturdy warp-proof, self extinguishing PVC, solid network/power cable hider/concealer is M1 Rating NF fire resistant w/186F Vicat softening point; UL 94V-0 Rated; UL/CSA approved\n- RACEWAY ACCESSORIES: Coupler (CBMWWD1911C), End Piece (CBMWWD1911E), Inside Elbow (CBMWWD1911I), Lateral Elbow (CBMWWD1911L), Outside Elbow (CBMWWD1911O), T Connector (CBMWWD1911T); sold separately\n\n\n\n Product ID: CBMWWD1911\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 39in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Power Cord Concealer
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644466_1599229775_4368_18267.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

78 in. (2 m) &pipe; Self-Extinguishing PVC &pipe; M1 Rated NF Fire Resistant\n\n This 78 in. (2 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.77 in. (19.6 mm) x 1.25 in. (31.8 mm). The raceway also features a durable one-piece design that opens on one side, enabling you to easily add or remove cables without the hassle of removing the raceway cover/lid.\n\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n The Star Tech.com Advantage\n\n- PROFESSIONALLY ORGANIZE & ROUTE CABLES: Cable management raceway with solid closed design to protect cables from damage/dust/debris & neatly routes them in your office or server room\n- INDUSTRIAL STRENGTH: Made from sturdy warp-proof, self extinguishing PVC, this network/power cable hider/concealer is M1 Rating NF fire resistant w/ 186F (86C) Vicat softening point; UL/94V-0 Rated\n- FLEXIBLE DESIGN: Easily add or remove cables to your cable run with the simple cover latch mechanisim / Stick to any surface using the attached adhesive tape or by drilling holes through the base\n\n\n\n Product ID: CBMOWD3220\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 78in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644389_1599224794_117_25949.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...

This 72 in. (1.83m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look.\n Professionally Organize & Route Cables\n\n This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.54 in. (13.8 mm) x 0.76 in. (19.5 mm). The raceway also features a durable one-piece design that opens on one side, enabling you to easily add or remove cables without the hassle of removing the raceway cover/lid.\n Hassle-Free Installation\n\n With an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing & sticking it to your desired location on any surface, including wood, drywall, glass or masonry.\n Industrial Strength\n\n Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated.\n\n This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years.\n\n\n\n Product ID: CBMOWD2013\n\n\n\n\n\n Model: Cable Management Raceway w/ Adhesive Tape 78in
- Network Cable Hider Kit
- Solid Wall Wire Duct System
- Cord Concealer Channel
- Surface Mount Wiring Channel PVC UL Rated\n\n Datasheet: http://objects.icecat.biz/objects/mmo_80644388_1599224768_3516_23181.pdf\n\n\n\n\n\n\n\n\n\n\n\n



...