Turn four SATA drives into an external storage device with USB (Universal Serial Bus) 2.0 & e SATA connectivity.
- Support for
...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

Connect a CF card to a computer through an IDE connector\n This Compact Flash IDE adapter is a perfect solution for accessing Compact Flash (CF I, CF II) & IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed & constructed to provide a reliable media card platform, the CF IDE adapter is backed by Star Tech.com''s 2-year warranty.\n The Star Tech.com Advantage\n- Quick & driver free installation into any IDE 40 pin & 44 pin slot\n- Easily swap cards in & out with built-in push button ejector Feature Feature Value Host interface IDEOutput interface CFInternal Y Ro HS compliance Y Data transfer rate (max)0.133 Gbit/s Operating temperature (T-T)-55
- 85 &176;CStorage temperature (T-T)-55
- 85 &176;COperating relative humidity (H-H)5
- 85% Width 97 mm Depth 100 mm Height 25 mm Weight 145 g User guide Y Package width 48 mm Package depth 220 mm Package height 158 mm


...

Install a 3.5in hard drive into a single 5.25in front bay\n\n This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay.\n\n A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.\n\n The Star Tech.com Advantage\n\n- Mount almost any 3.5in device into a standard 5.25in front bay\n- Backed by a Star Tech.com 2-year warranty & free lifetime technical support Feature Feature Value Size 13.3 cm (5.25") Type Bezel panel Number of HDDs supported 1HDD size 3.5" Product colour Black Width 133.4 mm Depth 146 mm Height 28.6 mm Package weight 200 g ...

Install a 3.5in hard drive into a single 5.25in front bay\n\n This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay.\n\n A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.\n\n The Star Tech.com Advantage\n\n- Mount almost any 3.5in device into a standard 5.25in front bay\n- Backed by a Star Tech.com 2-year warranty & free lifetime technical support Feature Feature Value Size 13.3 cm (5.25") Type Bezel panel Number of HDDs supported 1HDD size 3.5" Product colour Black Width 133.4 mm Depth 146 mm Height 28.6 mm Package weight 200 g ...

Provide protection against shocks/impacts to a 3.5in hard drive\n\n This two piece silicone hard drive protector sleeve provides a layer of sturdy protection against potential shock/impact damage for your 3.5in hard drives. When enclosed with larger top portion of sleeve, they provide added stability & protection for 3.5 in. SATA hard drives while inserted in any Star Tech.com Hard Drive Docking stations (SATADOCKU2, SATADOCKU2E, SATADOCK22UE) & most third party HD docks. \n\n This stackable versatile hard drive sleeve also offers the flexibility to fit most uninstalled IDE & SATA/SAS 3.5in HDDs, featuring a tip cover that's specifically designed to protect the hard drive interface ports during transportation or stacking, but can be removed for installation.\n\n The hard drive protector features a durable silicon design & a ventilation hole in the top portion for enhanced heat dissipation.\n\n The HDDSLEV35 is the perfect accessory to our SATA Hard Drive docks & "bare drive" (trayless) hard drive enclosures, & for keeping unused drives safe while not in use.\n\n The Star Tech.com Advantage\n\n- The removable end cap leaves the rest of the drive protected while it is in use, & protects the connectors when the drive is not in use\n- Designed to be stackable, for ease of storage Feature Feature Value Material Silicone Product colour Transparent Weight 91 g Package width 28 mm Package depth 144 mm Package height 195 mm Package weight 250 g ...

Provide protection against shocks/impacts to a 3.5in hard drive\n\n This two piece silicone hard drive protector sleeve provides a layer of sturdy protection against potential shock/impact damage for your 3.5in hard drives. When enclosed with larger top portion of sleeve, they provide added stability & protection for 3.5 in. SATA hard drives while inserted in any Star Tech.com Hard Drive Docking stations (SATADOCKU2, SATADOCKU2E, SATADOCK22UE) & most third party HD docks. \n\n This stackable versatile hard drive sleeve also offers the flexibility to fit most uninstalled IDE & SATA/SAS 3.5in HDDs, featuring a tip cover that's specifically designed to protect the hard drive interface ports during transportation or stacking, but can be removed for installation.\n\n The hard drive protector features a durable silicon design & a ventilation hole in the top portion for enhanced heat dissipation.\n\n The HDDSLEV35 is the perfect accessory to our SATA Hard Drive docks & "bare drive" (trayless) hard drive enclosures, & for keeping unused drives safe while not in use.\n\n The Star Tech.com Advantage\n\n- The removable end cap leaves the rest of the drive protected while it is in use, & protects the connectors when the drive is not in use\n- Designed to be stackable, for ease of storage Feature Feature Value Material Silicone Product colour Transparent Weight 91 g Package width 28 mm Package depth 144 mm Package height 195 mm Package weight 250 g ...

Provide protection against shocks/impacts to a 3.5in hard drive\n\n This two piece silicone hard drive protector sleeve provides a layer of sturdy protection against potential shock/impact damage for your 3.5in hard drives. When enclosed with larger top portion of sleeve, they provide added stability & protection for 3.5 in. SATA hard drives while inserted in any Star Tech.com Hard Drive Docking stations (SATADOCKU2, SATADOCKU2E, SATADOCK22UE) & most third party HD docks. \n\n This stackable versatile hard drive sleeve also offers the flexibility to fit most uninstalled IDE & SATA/SAS 3.5in HDDs, featuring a tip cover that's specifically designed to protect the hard drive interface ports during transportation or stacking, but can be removed for installation.\n\n The hard drive protector features a durable silicon design & a ventilation hole in the top portion for enhanced heat dissipation.\n\n The HDDSLEV35 is the perfect accessory to our SATA Hard Drive docks & "bare drive" (trayless) hard drive enclosures, & for keeping unused drives safe while not in use.\n\n The Star Tech.com Advantage\n\n- The removable end cap leaves the rest of the drive protected while it is in use, & protects the connectors when the drive is not in use\n- Designed to be stackable, for ease of storage Feature Feature Value Material Silicone Product colour Transparent Weight 91 g Package width 28 mm Package depth 144 mm Package height 195 mm Package weight 250 g ...