You can improve the appearance & airflow of any standard 19-inch server rack in seconds, using this 2U blanking panel. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Professional look\n The blanking panel creates a clean & professional look by covering empty space & visible cables. Adding blanking panels to your server racks offers a tidier appearance for a more organized server room. \n\n Tool-less installation\n For fast & easy installation, this 2U panel features a tool-less design that latches onto a standard 19 in. server rack, saving you time & hassle.\n\n Improve airflow\n The blanking panel features a solid design that helps guide airflow down the back of your rack, rather than passing between occupied spaces. enhanced airflow helps ensure your rack-mounted equipment is running at an optimal temperature.\n\n The RKPNLTL2U is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Feature Feature Value Type Filler panel Product colour Black Housing material Aluminium, Plastic Rack capacity 2URo HS compliance Y Width 88 mm Depth 483 mm Height 16 mm Weight 545 g Quantity per pack 1 pc (s) Package width 104 mm Package depth 538 mm Package height 36 mm Package weight 600 g ...

The CMDUCT2U 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, & reduce cable strain in the process.\n\n Made of high-quality steel & plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with 2 sets of rack screws (M5 & M6).\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Separate & route cables easily, using the fingers on either side or the rear pass-through holes\n- Add or remove bundled cables quickly, with a removable top cover\n- Increase the longevity of your server & networking equipment interfaces by providing cable strain relief Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 79 mm Height 88.1 mm Weight 954 g Package width 127 mm Package depth 536 mm Package height 90 mm Package weight 1.3kg Screws included Y ...

The CMDUCT2U 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, & reduce cable strain in the process.\n\n Made of high-quality steel & plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with 2 sets of rack screws (M5 & M6).\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Separate & route cables easily, using the fingers on either side or the rear pass-through holes\n- Add or remove bundled cables quickly, with a removable top cover\n- Increase the longevity of your server & networking equipment interfaces by providing cable strain relief Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 79 mm Height 88.1 mm Weight 954 g Package width 127 mm Package depth 536 mm Package height 90 mm Package weight 1.3kg Screws included Y ...

The CMDUCT2U 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, & reduce cable strain in the process.\n\n Made of high-quality steel & plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with 2 sets of rack screws (M5 & M6).\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Separate & route cables easily, using the fingers on either side or the rear pass-through holes\n- Add or remove bundled cables quickly, with a removable top cover\n- Increase the longevity of your server & networking equipment interfaces by providing cable strain relief Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 79 mm Height 88.1 mm Weight 954 g Package width 127 mm Package depth 536 mm Package height 90 mm Package weight 1.3kg Screws included Y ...

The CMDUCT2U 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, & reduce cable strain in the process.\n\n Made of high-quality steel & plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with 2 sets of rack screws (M5 & M6).\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Separate & route cables easily, using the fingers on either side or the rear pass-through holes\n- Add or remove bundled cables quickly, with a removable top cover\n- Increase the longevity of your server & networking equipment interfaces by providing cable strain relief Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 79 mm Height 88.1 mm Weight 954 g Package width 127 mm Package depth 536 mm Package height 90 mm Package weight 1.3kg Screws included Y ...

Rail Depth Adapter Kit &pipe; Recess or Extend &pipe; Universal &pipe; TAA Compliant\n\n This server rack depth extender adapter kit extends or reduces the mounting depth of two units (2U) in your server rack by up to four inches. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Accommodate Varying Equipment Sizes\n\n Mount equipment in your server rack up to four inches longer or shorter than the rack's mounting depth & increase your rack&153;s storage capabilities. If using the 2U rack extender in a two-post installation, they can support a total weight load of 20 lb. (9 kg) & in a four-post installation, they can support a total weight load of 130 lb. (59 kg).\n\n Save Money\n\n With this rail depth adapter kit, you can customize your server rack to support different mounting depths & consolidate your equipment into a single rack, eliminating the need to purchase different sized racks.\n\n Easily Manage Cables\n\n The network rack extender kit can also help manage your cables. You can mount equipment four inches from the rails, to prevent cables from protruding from the rack. You can also mount equipment with high-density cabling to minimize the effects of cable strain & provide easier access to the cables.\n\n We offer a wide selection of products that help you to optimize your server rack storage space, to improve space efficiency, accessibility & convenience. This product is backed by a 2-year warranty & free lifetime North American based technical support.\n\n The Star Tech.com Advantage\n\n- Customize your server rack by increasing or decreasing the mounting depth by 4 inches\n- TAA compliant for government GSA Schedule purchases\n- Easily manage cables within your rack by changing the depth of your equipment Feature Feature Value Type Depth adapter Product colour Black Maximum weight capacity 59kg Rack capacity 2URo HS compliance Y Certification TAAWidth 90 mm Depth 113 mm Height 25 mm Weight 246.8 g Quantity per pack 2 pc (s) Package width 150 mm Package depth 220 mm Package height 25 mm Package weight 294 g Quick installation guide Y Screws included Y Screw type 10-32 x 5/8 Number of screws 4 Nuts included Y Number of nuts 4 ...

Rail Depth Adapter Kit &pipe; Recess or Extend &pipe; Universal &pipe; TAA Compliant\n\n This server rack depth extender adapter kit extends or reduces the mounting depth of two units (2U) in your server rack by up to four inches. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Accommodate Varying Equipment Sizes\n\n Mount equipment in your server rack up to four inches longer or shorter than the rack's mounting depth & increase your rack&153;s storage capabilities. If using the 2U rack extender in a two-post installation, they can support a total weight load of 20 lb. (9 kg) & in a four-post installation, they can support a total weight load of 130 lb. (59 kg).\n\n Save Money\n\n With this rail depth adapter kit, you can customize your server rack to support different mounting depths & consolidate your equipment into a single rack, eliminating the need to purchase different sized racks.\n\n Easily Manage Cables\n\n The network rack extender kit can also help manage your cables. You can mount equipment four inches from the rails, to prevent cables from protruding from the rack. You can also mount equipment with high-density cabling to minimize the effects of cable strain & provide easier access to the cables.\n\n We offer a wide selection of products that help you to optimize your server rack storage space, to improve space efficiency, accessibility & convenience. This product is backed by a 2-year warranty & free lifetime North American based technical support.\n\n The Star Tech.com Advantage\n\n- Customize your server rack by increasing or decreasing the mounting depth by 4 inches\n- TAA compliant for government GSA Schedule purchases\n- Easily manage cables within your rack by changing the depth of your equipment Feature Feature Value Type Depth adapter Product colour Black Maximum weight capacity 59kg Rack capacity 2URo HS compliance Y Certification TAAWidth 90 mm Depth 113 mm Height 25 mm Weight 246.8 g Quantity per pack 2 pc (s) Package width 150 mm Package depth 220 mm Package height 25 mm Package weight 294 g Quick installation guide Y Screws included Y Screw type 10-32 x 5/8 Number of screws 4 Nuts included Y Number of nuts 4 ...

The RKPNLTL2UV 2U Tool-Less Vented Rack Panel mounts to a standard 19" 2 or 4-post rack to improve the organization & appearance of your rack in seconds. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The blank rack panel offers a tool-less design to save you time through simple installation or removal, with locking pins that secure into place with a quarter-turn. The panel is made from high-quality steel for long-term durability, plus the vented design allows for unobstructed airflow through your rack.\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Fast & easy installation & removal, with a tool-less design\n- Create a clean & professional look, by covering unused rack spaces Feature Feature Value Type Vented blank panel Product colour Black Housing material Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 15.7 mm Height 88.1 mm Weight 325 g Package width 97 mm Package depth 499 mm Package height 36 mm Package weight 431 g ...

The RKPNLTL2UV 2U Tool-Less Vented Rack Panel mounts to a standard 19" 2 or 4-post rack to improve the organization & appearance of your rack in seconds. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The blank rack panel offers a tool-less design to save you time through simple installation or removal, with locking pins that secure into place with a quarter-turn. The panel is made from high-quality steel for long-term durability, plus the vented design allows for unobstructed airflow through your rack.\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Fast & easy installation & removal, with a tool-less design\n- Create a clean & professional look, by covering unused rack spaces Feature Feature Value Type Vented blank panel Product colour Black Housing material Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 15.7 mm Height 88.1 mm Weight 325 g Package width 97 mm Package depth 499 mm Package height 36 mm Package weight 431 g ...

The RKPNLTL2UV 2U Tool-Less Vented Rack Panel mounts to a standard 19" 2 or 4-post rack to improve the organization & appearance of your rack in seconds. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n The blank rack panel offers a tool-less design to save you time through simple installation or removal, with locking pins that secure into place with a quarter-turn. The panel is made from high-quality steel for long-term durability, plus the vented design allows for unobstructed airflow through your rack.\n\n Backed by a Star Tech.com 2-year warranty.\n\n The Star Tech.com Advantage\n- Fast & easy installation & removal, with a tool-less design\n- Create a clean & professional look, by covering unused rack spaces Feature Feature Value Type Vented blank panel Product colour Black Housing material Steel Rack capacity 2URo HS compliance Y Certification CEWidth 482 mm Depth 15.7 mm Height 88.1 mm Weight 325 g Package width 97 mm Package depth 499 mm Package height 36 mm Package weight 431 g ...