Make a left-angled connection to your SATA drive, for installation in tight spaces The SATA12LA1 left angle SATA cable features a standard (straight) female Serial ATA connector as well as a left-angled (female) SATA connector, providing a simple 12-inch connection to a Serial ATA drive, even if space near the drive SATA port is limited. Once the left-angled SATA connector has been inserted into the SATA data port on the drive, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point
- an ideal solution for small or micro form factor computer cases. The left angled SATA cable features a thin, narrow construction that helps to improve airflow within the computer case; the cable also features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, & is backed by Star Tech.com's Lifetime Warranty. As an alternative, Star Tech.com also offers an 12in Right Angle SATA cable (SATA12RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction. " * Left angled cable connector easily fits in hard to reach areas & tight spaces * Supports fast data transfer rates of up to 300 Mbps * The thinner, more flexible design of this Serial ATA cable makes it easier to connect inside the system, while improving airflow"
...

Make a left-angled connection to your SATA drive, for installation in tight spaces\n\n The SATA12LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 12-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6 Gbps when used with SATA 3.0 compliant drives.\n\n The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile & flexible design of the cable improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool.\n\n Constructed of only finest top quality materials & designed for optimum performance & reliability this 12" SATA cable is backed by our lifetime warranty.\n\n As an alternative, Star Tech.com also offers a SATA12RA1" text="12in Right Angle SATA cable (SATA12RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction.\n\n The Star Tech.com Advantage\n\n- Left-angled SATA connector easily fits into hard to reach areas & tight spaces, providing flexibility to position your SATA drive as needed within your system case\n- Features a thin cable design, which helps reduce clutter & increase airflow within the computer/server case, for optimum system performance\n- Backed by Star Tech.com lifetime warranty, ensuring a dependable connection Feature Feature Value Cable length 0.3048 m Connector gender Male connector / Male connector Product colour Red Weight 10 g Package width 122 mm Package depth 92 mm Package height 10 mm Package length 9.2 cm ...

Power an LP4 device from a SATA Power connection on your computer power supply\n\n The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable means that you can position your devices as needed within the system case.\n\n Constructed of only finest top quality materials & designed for optimum performance & reliability this 12in SATA to Molex Cable is backed by Star Tech.com&153;s lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Position devices as needed within your computer case, with an extended power connection\n- Guaranteed reliability Feature Feature Value Cable length 0.3048 m Connector 1SATA 15-pin Connector 2 Molex (4-pin) Connector gender Male connector / Female connector Connector 1 form factor Straight Connector 2 form factor Straight Product colour Black, Red, White, Yellow Ro HS compliance Y Certification CE, REACHWidth 30 mm Depth 304.8 mm Height 8 mm Weight 16 g Package width 125 mm Package depth 225 mm Package height 9 mm Package weight 21 g ...

Power an LP4 device from a SATA Power connection on your computer power supply\n\n The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable means that you can position your devices as needed within the system case.\n\n Constructed of only finest top quality materials & designed for optimum performance & reliability this 12in SATA to Molex Cable is backed by Star Tech.com&153;s lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Position devices as needed within your computer case, with an extended power connection\n- Guaranteed reliability Feature Feature Value Cable length 0.3048 m Connector 1SATA 15-pin Connector 2 Molex (4-pin) Connector gender Male connector / Female connector Connector 1 form factor Straight Connector 2 form factor Straight Product colour Black, Red, White, Yellow Ro HS compliance Y Certification CE, REACHWidth 30 mm Depth 304.8 mm Height 8 mm Weight 16 g Package width 125 mm Package depth 225 mm Package height 9 mm Package weight 21 g ...

Make a right-angled connection to your SATA drive, for installation in tight spaces\n\n The SATA12RA1 Right Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a right-angled SATA receptacle, providing a simple 12-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6 Gbps when used with SATA 3.0 compliant drives.\n\n The right-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile & flexible design of the cable improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool.\n\n Constructed of only finest top quality materials & designed for optimum performance & reliability this 12" SATA cable is backed by our lifetime warranty.\n\n As an alternative, Star Tech.com also offers an SATA12LA1" text="12in Left Angle SATA cable (SATA12LA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connected to the SATA drive from the opposite direction.\n\n The Star Tech.com Advantage\n\n- Right-angled SATA connector easily fits into hard to reach areas & tight spaces, providing flexibility to position your SATA drive as needed within your system case\n- Features a thin cable design, which helps reduce clutter & increase airflow within the computer/server case, for optimum system performance\n- Backed by Star Tech.com lifetime warranty, ensuring a dependable connection Feature Feature Value Cable length 0.3 m Product colour Red Package width 120 mm Package depth 90 mm Package height 10 mm Package weight 20 g ...

Connect a slimline SATA drive to a standard SATA motherboard connector\n\n The SLSATAF12 Slimline SATA to SATA with LP4 Power Cable (12-inch) features a SATA data receptacle & a LP4 power connection on one end, & a Slimline Serial ATA receptacle on the other
- allowing you to connect a slim SATA drive to a computer motherboard that does not have a Slimline connection available.\n\n Supporting full SATA 3.0 bandwidth of up to 6 Gbps when used with SATA 3.0 compliant drives, this innovative adapter cable provides you with the connections needed to simplify the migration to Slimline SATA-equipped drives.\n\n Constructed of only finest top quality materials & designed for optimum performance & reliability the SLSATAF12 is backed by our lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Cost-effective solution for connecting a Slimline SATA drive to a SATA equipped computer motherboard\n- Features a thin cable design, which helps reduce clutter & increase airflow within the computer/server case, for optimum system performance\n- Backed by Star Tech.com lifetime warranty, ensuring a dependable connection Feature Feature Value Cable length 0.304 m Cable type SATA IIIConnector 1SATA 13-pin Connector 2SATA 7-pin + Molex (4-pin) Connector gender Female connector / Female connector Product colour Red Connector 1 form factor Straight Connector 2 form factor Straight Maximum data transfer rate 6 Gbit/s Weight 32 g Ro HS compliance Y Certification CE, REACHQuantity per pack 1 pc (s) Package width 125 mm Package depth 225 mm Package height 22 mm Package length 12.4 cm Package weight 37 g
...

Connect two 3-pin (TX3) fans to a single power supply connector\n\n This TX3 Fan Power Splitter Cable lets you connect two 3-pin (TX3) fans to a single power supply connector, allowing you to optimize your cooling capability without having to upgrade the power supply.\n\n Providing a flexible way to position computer case fans as needed, the TX3 Fan Power Splitter cable offers a connection length of 1ft, eliminating the need to strain the connection from the computer power supply in order to reach the fan power connection.\n\n This high quality splitter cable is constructed of high quality materials to ensure long lasting performance, & is backed by Star Tech.com's Lifetime Warranty.\n\n The Star Tech.com Advantage\n\n- means that you can connect two 3-pin (TX3) fans to a single power supply connector\n- Re-position your computer case fans to provide optimal cooling to your system\n- Backed by Star Tech.com lifetime warranty Feature Feature Value Cable length 0.3 m Connector 1 Molex (3-pin) Connector 22 x Molex (3-pin) Connector gender Male connector / Female connector Connector 1 form factor Straight Connector 2 form factor Straight Product colour Multicolor Ro HS compliance Y Width 8 mm Depth 300 mm Height 6 mm Package width 125 mm Package depth 90 mm Package height 10 mm ...

Connect two 3-pin (TX3) fans to a single power supply connector\n\n This TX3 Fan Power Splitter Cable lets you connect two 3-pin (TX3) fans to a single power supply connector, allowing you to optimize your cooling capability without having to upgrade the power supply.\n\n Providing a flexible way to position computer case fans as needed, the TX3 Fan Power Splitter cable offers a connection length of 1ft, eliminating the need to strain the connection from the computer power supply in order to reach the fan power connection.\n\n This high quality splitter cable is constructed of high quality materials to ensure long lasting performance, & is backed by Star Tech.com's Lifetime Warranty.\n\n The Star Tech.com Advantage\n\n- means that you can connect two 3-pin (TX3) fans to a single power supply connector\n- Re-position your computer case fans to provide optimal cooling to your system\n- Backed by Star Tech.com lifetime warranty Feature Feature Value Cable length 0.3 m Connector 1 Molex (3-pin) Connector 22 x Molex (3-pin) Connector gender Male connector / Female connector Connector 1 form factor Straight Connector 2 form factor Straight Product colour Multicolor Ro HS compliance Y Width 8 mm Depth 300 mm Height 6 mm Package width 125 mm Package depth 90 mm Package height 10 mm ...

Connect two 3-pin (TX3) fans to a single power supply connector\n\n This TX3 Fan Power Splitter Cable lets you connect two 3-pin (TX3) fans to a single power supply connector, allowing you to optimize your cooling capability without having to upgrade the power supply.\n\n Providing a flexible way to position computer case fans as needed, the TX3 Fan Power Splitter cable offers a connection length of 1ft, eliminating the need to strain the connection from the computer power supply in order to reach the fan power connection.\n\n This high quality splitter cable is constructed of high quality materials to ensure long lasting performance, & is backed by Star Tech.com's Lifetime Warranty.\n\n The Star Tech.com Advantage\n\n- means that you can connect two 3-pin (TX3) fans to a single power supply connector\n- Re-position your computer case fans to provide optimal cooling to your system\n- Backed by Star Tech.com lifetime warranty Feature Feature Value Cable length 0.3 m Connector 1 Molex (3-pin) Connector 22 x Molex (3-pin) Connector gender Male connector / Female connector Connector 1 form factor Straight Connector 2 form factor Straight Product colour Multicolor Ro HS compliance Y Width 8 mm Depth 300 mm Height 6 mm Package width 125 mm Package depth 90 mm Package height 10 mm ...

Use this wall mount network cabinet to mount your server or networking equipment to the wall with a hinged enclosure for easy access\n\n This 12U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure that has a hinged rear door for easy access to your equipment. The enclosure features adjustable mounting depth from 2.4 to 19.7 in. to provide a robust storage solution for your rack-mount equipment.\n\n To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks & supporting a total load capacity of up to 200 lb. (90 kg).\n\n Save space in your office or server room\n\n Save valuable floor space by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also

Includes:: a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools.\n\n Easily access your servers & network equipment\n\n The wall-mount network rack makes it easy to access your equipment & cabling, with a rear hinge that swings the enclosure away from the wall. By flipping the enclosure 180 degrees upon installation, you can reverse the direction of the hinge so that the enclosure can swing open from left or the right, depending on your preference.\n\n The 12U network cabinet features a removable & reversible front door & removable side panels, each with quick-release mechanisms, so you can easily access your equipment. Plus, each door & panel on this rack features an independent lock, ensuring your equipment is secure.\n\n For hassle-free cable management, the rack

Includes:: a 3 meter roll of hook-&-loop cable tie that makes it easy to keep your cables neat & tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment.\n\n Securely protect your equipment\n\n This server rack enclosure features heavy-duty steel construction, with lockable doors at all entrances. For hassle-free equipment installation, the mounting rails on the rack can be switched for use with square holes & cage nuts, or tapped rails.\n\n To ensure your equipment is running at an optimal temperature, the server rack/cabinet promotes passive cooling. It features mesh doors & vented top & bottom panels for maximum airflow.\n\n For simple & sturdy mounting, the rack&153;s mounting holes are positioned 16 in. apart, so you can securely attach it to a wall using wall studs.\n\n The RK1224WALHM is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- EASY ACCESS: 24" deep wall mount network cabinet for IT gear e.g. Cisco 3850 & 2960 series switches. 180&176; hinged design w/ lockable access to rear of mounted devices. Removable doors & side panels\n- ACCESORIES INCLUDED: IT Data Rack

Includes:: complete set of accessories: a shelf (CABSHELFV1U), roll of hook-&-loop fastener, 50 cage nuts & screws, & 2 pairs of keys for the front & side panels\n- STURDY CONSTRUCTION: 4 Post 19" 12U EIA/ECA-310-E enclosed design, 200lb weight cap, 24" deep with max. 20" mounting depth, removable sides, locking reversible door, dual top cable hole, optional fans\n\n class="generic"> Weight & dimensions Package depth 675 mm Package width 722 mm Package height 720 mm Package weight 41.2kg Inner width 595 mm Inner depth 652 mm Inner height 54 cm Mounting depth (max)50 cm Mounting depth (min)6 cm Width 610 mm Depth 655 mm Height 640 mm Weight 37.4kg Maximum weight capacity 90kg Packaging content Manual Yes Nuts included Yes Number of nuts 50 Screws included Yes Number of screws 50 Side panels included Yes Certificates Ro HS compliance Yes Certification CE, REACHFeatures Key lock Yes Frame type Closed Design 4-post Rack capacity 12 U Castor wheels No Adjustable mounting rails Yes Removable front door No Removable side panels Yes Back door construction Steel Front door construction Steel Side panel construction Steel Cable management Yes Mounting hole shape Square Back door key lock Yes Front door key lock Yes Type Wall mounted rack Side panels included Yes Maximum weight capacity 90kg Product colour Black Certification CE, REACHRo HS compliance Yes Rack rail thickness 2 mm Packaging data Manual Yes Nuts included Yes Number of nuts 50 Package depth 675 mm Package width 722 mm Package height 720 mm Package weight 41.2kg Screws included Yes Number of screws 50 Technical details Package width 722 mm Package height 720 mm Type Wall mounted rack Side panels included Yes Compliance industry standards EIA/ECA-310-ERack capacity 12 U Colour Product colour Black Logistics data Master (outer) case width 67 cm Master (outer) case length 72 cm Master (outer) case height 72 cm Quantity per master (outer) case 1 pc (s) Other features Compliance industry standards EIA/ECA-310-E\n\n\n\nhttp://objects.icecat.biz/objects/mmo_37605071_1588687943_557_15663.pdf





...