Add a USB (Universal Serial Bus) 3.0 port connection that inserts flush into a laptop Express Card slot\n\n The ECUSB3S11 Flush Mount 1-Port USB (Universal Serial Bus) 3.0 Express Card lets you add a single USB (Universal Serial Bus) 3.0 port connection to your laptop through an Express Card slot.\n\n The USB (Universal Serial Bus) 3.0 adapter uses a unique form factor design that allows it to sit fully in a standard 34mm Express Card slot without sticking out. The port sits virtually flush with the sides of the laptop, enabling you to leave the card installed even while on the move, without fear of damage to the card or slot.\n\n Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.\n\n The USB (Universal Serial Bus) 3.0 Express Card adapter supports data transfer rates up to 5 Gbps, & is still backward compatible with USB (Universal Serial Bus) 2.0 at up to 480 Mbps, or USB (Universal Serial Bus) 1.1/1.0 at up to 12/1.5 Mbps respectively.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n Improved Performance with UASP\n\n UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.\n\n Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n\n- Eliminate the worry of snagging or hitting the Express Card with a unique Flush Mount design\n- Increase productivity with Super Speed USB (Universal Serial Bus) 3.0 connectivity, while remaining backward compatible with USB (Universal Serial Bus) 2.0/1.x devices\n- Time-saving file transfers, up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-supported enclosure Feature Feature Value Host interface Express Card Output interface USB 3.0USB 3.0 (3.1 Gen 1) Type-A ports quantity 1 Internal N Product colour Black, Silver Ro HS compliance Y Certification CE, FCCChipset Renesas / NEC
- &181;PD720202 Data transfer rate (max)5 Gbit/s UASP support Y Operating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 85 &176;COperating relative humidity (H-H)5
- 95% Windows operating systems supported Windows 10 Education, Windows 10 Education x 64, Windows 10 Enterprise, Windows 10 Enterprise x 64, Windows 10 Home, Windows 10 Home x 64, Windows 10 Pro, Windows 10 Pro x 64, Windows 7 Home Basic, Windows 7 Home Basic x 64, Windows 7 Home Premium, Windows 7 Home Premium x 64, Windows 7 Professional, Windows 7 Professional x 64, Windows 7 Starter, Windows 7 Starter x 64, Windows 7 Ultimate, Windows 7 Ultimate x 64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x 64, Windows 8 Pro, Windows 8 Pro x 64, Windows 8 x 64, Windows Vista Business, Windows Vista Business x 64, Windows Vista Enterprise, Windows Vista Enterprise x 64, Windows Vista Home Basic, Windows Vista Home Basic x 64, Windows Vista Home Premium, Windows Vista Home Premium x 64, Windows Vista Ultimate, Windows Vista Ultimate x 64, Windows XP Home, Windows XP Home x 64, Windows XP Professional, Windows XP Professional x 64 Server operating systems supported Windows Server 2003, Windows Server 2008 R2, Windows Server 2012 Width 34 mm Depth 75 mm Height 5 mm Weight 17.5 g Cables included USBMounting brackets included Y Drivers included Y Manual Y Package width 130 mm Package depth 160 mm Package height 30 mm Package weight 99 g Data transfer rate 5 Gbit/s



...

Add a USB (Universal Serial Bus) 3.0 port connection that inserts flush into a laptop Express Card slot\n\n The ECUSB3S11 Flush Mount 1-Port USB (Universal Serial Bus) 3.0 Express Card lets you add a single USB (Universal Serial Bus) 3.0 port connection to your laptop through an Express Card slot.\n\n The USB (Universal Serial Bus) 3.0 adapter uses a unique form factor design that allows it to sit fully in a standard 34mm Express Card slot without sticking out. The port sits virtually flush with the sides of the laptop, enabling you to leave the card installed even while on the move, without fear of damage to the card or slot.\n\n Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.\n\n The USB (Universal Serial Bus) 3.0 Express Card adapter supports data transfer rates up to 5 Gbps, & is still backward compatible with USB (Universal Serial Bus) 2.0 at up to 480 Mbps, or USB (Universal Serial Bus) 1.1/1.0 at up to 12/1.5 Mbps respectively.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n Improved Performance with UASP\n\n UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.\n\n Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n\n- Eliminate the worry of snagging or hitting the Express Card with a unique Flush Mount design\n- Increase productivity with Super Speed USB (Universal Serial Bus) 3.0 connectivity, while remaining backward compatible with USB (Universal Serial Bus) 2.0/1.x devices\n- Time-saving file transfers, up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-supported enclosure Feature Feature Value Host interface Express Card Output interface USB 3.0USB 3.0 (3.1 Gen 1) Type-A ports quantity 1 Internal N Product colour Black, Silver Ro HS compliance Y Certification CE, FCCChipset Renesas / NEC
- &181;PD720202 Data transfer rate (max)5 Gbit/s UASP support Y Operating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 85 &176;COperating relative humidity (H-H)5
- 95% Windows operating systems supported Windows 10 Education, Windows 10 Education x 64, Windows 10 Enterprise, Windows 10 Enterprise x 64, Windows 10 Home, Windows 10 Home x 64, Windows 10 Pro, Windows 10 Pro x 64, Windows 7 Home Basic, Windows 7 Home Basic x 64, Windows 7 Home Premium, Windows 7 Home Premium x 64, Windows 7 Professional, Windows 7 Professional x 64, Windows 7 Starter, Windows 7 Starter x 64, Windows 7 Ultimate, Windows 7 Ultimate x 64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x 64, Windows 8 Pro, Windows 8 Pro x 64, Windows 8 x 64, Windows Vista Business, Windows Vista Business x 64, Windows Vista Enterprise, Windows Vista Enterprise x 64, Windows Vista Home Basic, Windows Vista Home Basic x 64, Windows Vista Home Premium, Windows Vista Home Premium x 64, Windows Vista Ultimate, Windows Vista Ultimate x 64, Windows XP Home, Windows XP Home x 64, Windows XP Professional, Windows XP Professional x 64 Server operating systems supported Windows Server 2003, Windows Server 2008 R2, Windows Server 2012 Width 34 mm Depth 75 mm Height 5 mm Weight 17.5 g Cables included USBMounting brackets included Y Drivers included Y Manual Y Package width 130 mm Package depth 160 mm Package height 30 mm Package weight 99 g Data transfer rate 5 Gbit/s



...

Add an RS232 serial port with COM retention to your laptop or desktop computer through USB (Universal Serial Bus) The ICUSB2321F 1-Port USB (Universal Serial Bus) to Serial RS232 Adapter Cable with FTDI chipset & COM Retention converts an available USB (Universal Serial Bus) 1.1 or 2.0 port into an RS232 serial DB9 port to connect, monitor & control your serial devices. This compact adapter features COM retention, allowing the same COM port value to automatically be re-assigned to the port if the cable is disconnected & re-connected to the host computer, or if the system is rebooted. The ICUSB2321F uses the FTDI chipset which supports additional customization, advanced features, & compatibility not necessarily offered by other solutions. Compatibility with a broad list of Operating Systems including Windows, Windows CE, Mac OS & Linux, makes this product easy to integrate into mixed environments. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. " * Portable USB (Universal Serial Bus)-Powered design requires no bulky power adapter or outlet * The FTDI chipset is highly customizable & compatible, making it the ideal solution for any setup * Simple installation & operation with COM port retention provides robust serial connectivity for legacy devices" ...

The ICUSB2321F 1-Port USB (Universal Serial Bus) to Serial RS232 Adapter Cable with FTDI chipset & COM Retention converts an available USB (Universal Serial Bus) 1.1 or 2.0 port into an RS232 serial DB9 port to connect, monitor & control your serial devices.\n\n This compact adapter features COM retention, allowing the same COM port value to automatically be re-assigned to the port if the cable is disconnected & re-connected to the host computer, or if the system is rebooted. The ICUSB2321F uses the FTDI chipset which supports additional customization, advanced features, & compatibility not necessarily offered by other solutions.\n\n Compatibility with a broad list of Operating Systems including Windows&174;, Windows CE, Mac OS & Linux, makes this product easy to integrate into mixed environments.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n- The FTDI chipset is highly customizable & compatible, making it the ideal solution for any setup\n- Portable USB (Universal Serial Bus)-Powered design requires no bulky power adapter or outlet\n- Simple installation & operation with COM port retention provides robust serial connectivity for legacy devices Feature Feature Value Connector 1DB-9 Connector 2USB 2.0 AConnector gender Male connector / Male connector Cable length 0.2 m Product colour Black Chipset FTDI
- FT232RLData bits 7, 8 Stop bits 1, 2 Baud rate 115.2 Kbit/s Parity bit Even, Mark, N, Odd, Space FIFO (First In, First Out)256 BRo HS compliance Y Certification CE, FCCCompatible operating systems- Windows CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10n- Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019n- Mac OS 10.6 to 10.14n- Linux 2.4.x to 4.11.x LTSOperating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)-20
- 85 &176;CRelative humidity 5
- 95% Width 41.5 mm Depth 45 mm Height 22 mm Weight 200 g Package width 150 mm Package depth 220 mm Package height 40 mm Package weight 200 g Manual Y Drivers included Y



...

The ICUSB2321FIS 1-Port FTDI USB (Universal Serial Bus) to Serial RS232 Adapter Cable with Optical Isolation converts an available USB (Universal Serial Bus) 1.1 or 2.0 port into an RS232 DB9 port that can be used to connect, monitor & control your serial devices.\n\n The USB (Universal Serial Bus) to serial adapter features integrated optical isolation circuits & surge protection to protect your critical, sensitive control equipment against electrical damage, making it a viable solution for costly industrial serial devices.\n\n The versatile FTDI chipset also supports COM retention, additional customization/features, & compatibility not offered by most other solutions. Broad operating system compatibility including Windows&174;, Windows CE, Mac OS & Linux, makes this product easy to integrate into mixed environments.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n- Circuit isolation provides electrical protection for sensitive, & often expensive industrial equipment\n- Portable USB (Universal Serial Bus)-Powered design requires no bulky power adapter or outlet\n- The FTDI chipset driver is highly customizable & broadly compatible, making it the ideal solution for any setup Feature Feature Value Connector 1DB-9 Connector 2USB AConnector gender Male connector / Male connector Cable length 2.5 m Product colour Black Housing material Plastic USB required Y Chipset FTDI
- FT232RLData bits 7, 8 Stop bits 1, 2 Baud rate 921.6 Kbit/s Parity bit Even, Mark, N, Odd, Space Isolation 2500 k VFIFO (First In, First Out)256 BRo HS compliance Y Certification CE, FCC, Microsoft WHQLCompatible operating systems- Windows&174; CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10n- Windows Server&174; 2003, 2008 R2, 2012, 2012 R2n- Mac OS X&174; 10.6 to 10.11n- Linux 2.4.x to 4.4.x Operating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)-20
- 85 &176;CRelative humidity 5
- 95% Width 40 mm Depth 2400 mm Height 20 mm Weight 86 g Package width 150 mm Package depth 210 mm Package height 40 mm Package weight 200 g Manual Y Drivers included Y Gross weight (imperial)0.2kg (0.44 lbs)



...

Add a 10/100 Mbps Ethernet port to any low profile PC through a PCI slot * Cost effective & simple Ethernet networking for Low Profile/small form factor (SFF) systems * Backed by a Star Tech.com lifetime warranty & free lifetime technical support This 1 Port PCI Fast Ethernet Network Adapter Card offers a reliable, cost-effective Ethernet network connection that's ideal for small form factor computers. Delivering a simple connection to 10/100 Mbps (Fast) Ethernet networks, the NIC features auto-negotiation that senses speed & duplex capabilities of connected devices & full duplex support for data transfer rates up to 200 Mbps. A versatile network interface solution, the NIC features a low profile mounting bracket that's suitable for small form factor computers, & is supported by all popular operating systems including Windows, Linux, Mac OS & Novell platforms. Backed by Star Tech.com's Lifetime Warranty. ...

Add a 10/100 Mbps Ethernet port to any low profile PC through a PCI slot * Cost effective & simple Ethernet networking for Low Profile/small form factor (SFF) systems * Backed by a Star Tech.com lifetime warranty & free lifetime technical support This 1 Port PCI Fast Ethernet Network Adapter Card offers a reliable, cost-effective Ethernet network connection that's ideal for small form factor computers. Delivering a simple connection to 10/100 Mbps (Fast) Ethernet networks, the NIC features auto-negotiation that senses speed & duplex capabilities of connected devices & full duplex support for data transfer rates up to 200 Mbps. A versatile network interface solution, the NIC features a low profile mounting bracket that's suitable for small form factor computers, & is supported by all popular operating systems including Windows, Linux, Mac OS & Novell platforms. Backed by Star Tech.com's Lifetime Warranty. ...

Add an R422/485 serial port to your laptop or desktop computer through USB\n The ICUSB422IS 1 Port Metal Industrial USB (Universal Serial Bus) to RS422/RS485 Serial Adapter w/ Isolation connects to a computer using USB (Universal Serial Bus) & means that you can connect any RS-422 or RS-485 serial device via the provided DB9 port or hard-wired to the terminal block. The USB (Universal Serial Bus) to serial adapter features circuit isolation to ensure that sensitive controls & devices will not be damaged while connected, making it a viable solution for connecting costly industrial serial devices. The RS422/485 Converter receives full power via the host USB (Universal Serial Bus) connection, & provides power to the attached serial device without requiring an external power adapter. Designed to provide a durable serial solution, the USB (Universal Serial Bus) to RS422/485 Converter is ruggedly constructed & can be mounted nearly anywhere. Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n The Star Tech.com Advantage\n- Supports RS-485 & RS-422 serial interfaces via DB9 or Terminal Block connections for versatile connection options\n- Circuit isolation provides electrical protection for sensitive, & often expensive industrial equipment\n- Rugged, USB (Universal Serial Bus) Bus powered enclosure requiring no external power adapter for simple integration into harsh industrial environments Feature Feature Value Connector 1USB BConnector 2RS-422/485 Connector gender Male connector / Female connector Cable length 1.8 m Product colour Black Data transfer rate 0.00088 Gbit/s Compatible operating systems Windows 8 ((32/64bit), (32/64), Vista (32/64), XP (32/64), 2000, 98SE, XP Embedded, CE (4.2+), Windows Server 2012, 2008 R2, 2003 (32/64), Mac OS 10.x, Linux 2.4.x / 2.6.x Input voltage 5 VOperating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)-20
- 85 &176;CRelative humidity 5
- 95% Width 64 mm Depth 118 mm Height 23 mm Weight 180 g Package width 45 mm Package depth 230 mm Package height 160 mm Package weight 400 g Quantity per pack 1 pc (s) Cables included USB


...

Add an R422/485 serial port to your laptop or desktop computer through USB\n The ICUSB422IS 1 Port Metal Industrial USB (Universal Serial Bus) to RS422/RS485 Serial Adapter w/ Isolation connects to a computer using USB (Universal Serial Bus) & means that you can connect any RS-422 or RS-485 serial device via the provided DB9 port or hard-wired to the terminal block. The USB (Universal Serial Bus) to serial adapter features circuit isolation to ensure that sensitive controls & devices will not be damaged while connected, making it a viable solution for connecting costly industrial serial devices. The RS422/485 Converter receives full power via the host USB (Universal Serial Bus) connection, & provides power to the attached serial device without requiring an external power adapter. Designed to provide a durable serial solution, the USB (Universal Serial Bus) to RS422/485 Converter is ruggedly constructed & can be mounted nearly anywhere. Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n The Star Tech.com Advantage\n- Supports RS-485 & RS-422 serial interfaces via DB9 or Terminal Block connections for versatile connection options\n- Circuit isolation provides electrical protection for sensitive, & often expensive industrial equipment\n- Rugged, USB (Universal Serial Bus) Bus powered enclosure requiring no external power adapter for simple integration into harsh industrial environments Feature Feature Value Connector 1USB BConnector 2RS-422/485 Connector gender Male connector / Female connector Cable length 1.8 m Product colour Black Data transfer rate 0.00088 Gbit/s Compatible operating systems Windows 8 ((32/64bit), (32/64), Vista (32/64), XP (32/64), 2000, 98SE, XP Embedded, CE (4.2+), Windows Server 2012, 2008 R2, 2003 (32/64), Mac OS 10.x, Linux 2.4.x / 2.6.x Input voltage 5 VOperating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)-20
- 85 &176;CRelative humidity 5
- 95% Width 64 mm Depth 118 mm Height 23 mm Weight 180 g Package width 45 mm Package depth 230 mm Package height 160 mm Package weight 400 g Quantity per pack 1 pc (s) Cables included USB


...

Add an R422/485 serial port to your laptop or desktop computer through USB\n The ICUSB422IS 1 Port Metal Industrial USB (Universal Serial Bus) to RS422/RS485 Serial Adapter w/ Isolation connects to a computer using USB (Universal Serial Bus) & means that you can connect any RS-422 or RS-485 serial device via the provided DB9 port or hard-wired to the terminal block. The USB (Universal Serial Bus) to serial adapter features circuit isolation to ensure that sensitive controls & devices will not be damaged while connected, making it a viable solution for connecting costly industrial serial devices. The RS422/485 Converter receives full power via the host USB (Universal Serial Bus) connection, & provides power to the attached serial device without requiring an external power adapter. Designed to provide a durable serial solution, the USB (Universal Serial Bus) to RS422/485 Converter is ruggedly constructed & can be mounted nearly anywhere. Backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n The Star Tech.com Advantage\n- Supports RS-485 & RS-422 serial interfaces via DB9 or Terminal Block connections for versatile connection options\n- Circuit isolation provides electrical protection for sensitive, & often expensive industrial equipment\n- Rugged, USB (Universal Serial Bus) Bus powered enclosure requiring no external power adapter for simple integration into harsh industrial environments Feature Feature Value Connector 1USB BConnector 2RS-422/485 Connector gender Male connector / Female connector Cable length 1.8 m Product colour Black Data transfer rate 0.00088 Gbit/s Compatible operating systems Windows 8 ((32/64bit), (32/64), Vista (32/64), XP (32/64), 2000, 98SE, XP Embedded, CE (4.2+), Windows Server 2012, 2008 R2, 2003 (32/64), Mac OS 10.x, Linux 2.4.x / 2.6.x Input voltage 5 VOperating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)-20
- 85 &176;CRelative humidity 5
- 95% Width 64 mm Depth 118 mm Height 23 mm Weight 180 g Package width 45 mm Package depth 230 mm Package height 160 mm Package weight 400 g Quantity per pack 1 pc (s) Cables included USB


...