More From Contributor

£1593.73
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-H686-D1602-8G\n\n\n
...
Available
£1535.68
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-H686-D1602-8G\n\n\n
...
Available
£1620.98
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications. Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments. Set SSD caching to boost IOPS with M.2 NVMe SSD While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance. Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget. ZFS-based Qu TS hero operating system enhances NAS performance & data integrity Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks. Tiered storage configuration for a Qu TS hero NAS Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero. Step 1: System Drive The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended. Step 2: Read Cache & ZIL Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space. Step 3: Data Storage Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance. Inline data deduplication, compression, & compaction drives big data storage efficiency Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era. Real-time Snap Sync ensures minimal RPO with real-time disaster recovery Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss. Snapshots multiply backup protection Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control. HBS simplifies 3-2-1 backup plans HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster. All-in-one virtual machine & container hosting solution You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment. PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential. Move business data to the cloud & enjoy low latency access to cloud-based data The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications. Switch operating systems to upgrade current storage The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n Storage Total installed storage capacity 16 TBOnline RAID migration Yes Online RAID expansion Yes Disk roaming Yes Bad block scan Yes Storage drives installed Yes Installed storage drive type HDDSupported storage drive types HDD & SSDNumber of storage drives supported 6 Hot-swap drive bays Yes RAID support Yes Supported file systems FAT32, HFS+, NTFS, ZFS, ext 3, ext 4RAID levels 0, 1, 5, 6, 10, 50, 60 Supported storage drive interfaces Serial ATA II, Serial ATA IIIStorage drive sizes supported 2.5, 3.5" Number of M.2 (M & B) slots 2RAID rebuild Yes Processor Processor manufacturer Intel Processor threads 4 Processor cache 3 MBProcessor boost frequency 3.2 GHz CPU configuration (max)1 Processor frequency 2.5 GHz Processor family Intel&174; Xeon&174; DProcessor model D-1602 Processor cores 2 Memory Internal memory type DDR4 Internal memory 8 GBMaximum RAM supported 128 GBMemory slots 4 Flash memory 5000 MBMemory form factor UDIMMNetwork Ethernet LANYes Ethernet LAN data rates 100, 1000, 2500 Mbit/s Supported network protocols TCP/IP, HTTP/HTTPSJumbo frames support Yes DHCP server Yes DHCP client Yes WLAN adapter supported Yes Ports & interfaces USB port Yes USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 4PCI Express x 8 (Gen 3.x) slots 2 Ethernet LAN (RJ-45) ports 4 Hard drive RAID support Yes Supported file systems FAT32, HFS+, NTFS, ZFS, ext 3, ext 4RAID levels 0, 1, 5, 6, 10, 50, 60 Design Fan diameter 29.7 cm Cooling type Active Fan diameter 8 cm Cable lock slot type Kensington Product colour Black Number of fans 2 fan (s)LED indicators HDD, SSD, Status Chassis type Tower Cable lock slot Yes Technical details Type NASDevice class Large Enterprise Business Backup function Yes Backup features Cloud, i SCSI LUNProduct colour Black Noise level 18.6 d B Multilingual support Yes LED indicators HDD, SSD, Status Chassis type Tower Buzzer Yes Number of fans 2 fan (s) Performance Built-in FTP server Yes System log Yes Share folder CIFS/SMBS.M.A.R.T. support Yes Hot spare Yes Browser supported Apple Safari 7+, Google Chrome, Microsoft Internet Explorer 10+, Mozilla Firefox Universal Plug & Play (UPn P) Yes Type NASDevice class Large Enterprise Business Backup function Yes Backup features Cloud, i SCSI LUNOn/off switch Yes Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Web-based management Yes Security algorithms 256-bit AES, AES, FIPS 140-2, HTTPS, SSH, SSL/TLSReset button Yes Operating system version 4.5.0 Noise level 18.6 d B Multilingual support Yes Buzzer Yes Access Control List (ACL) Yes Snapshot Yes USB copy function Yes Cooling Cooling type Active Fan diameter 8 cm Number of fans 2 fan (s) Security Cable lock slot type Kensington Security algorithms 256-bit AES, AES, FIPS 140-2, HTTPS, SSH, SSL/TLSCable lock slot Yes Access Control List (ACL) Yes Software Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Operating system version 4.5.0 Management features On/off switch Yes Web-based management Yes Reset button Yes Power Power supply location Built-in Power supply unit (PSU) capacity 250 WAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)61.115 WNumber of power supply units 1 Weight & dimensions Width 224.9 mm Depth 319.8 mm Height 231.9 mm Weight 7.27kg Packaging content Number of screws 30 Cables included AC, LAN (RJ-45) Processor special features Intel VT-x with Extended Page Tables (EPT) Yes Intel Virtualization Technology for Directed I/O (VT-d) Yes Intel Virtualization Technology (VT-x) Yes Intel TSX-NIYes Intel Trusted Execution Technology Yes Intel Quick Assist Technology No Intel 64 Yes Idle States Yes Execute Disable Bit Yes Enhanced Intel Speed Step Technology Yes Embedded options available No System requirements Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Operational conditions Operating temperature (T-T)0
- 35 &176;COperating relative humidity (H-H)5
- 95% Packaging data Cables included AC, LAN (RJ-45)\n\n\n\n




...
Available
£1990.97
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-H686-D1602-8G\n\n\n
...
Available
£1990.97
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-H686-D1602-8G\n\n\n
...
Available
£1535.68
Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-H686-D1602-8G\n\n\n
...
Available
£1494.43
https://youtu.be/TPnf 7M5gyy 8\n\n Delivering enterprise performance at SMB prices, the TS-h 886 features an Intel Xeon D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 886 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 886 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 886 uses an Intel Xeon D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 886 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 886 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 886 means that you can maximize both your storage capacity & performance. \n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 886 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 886 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 886 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 886 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 886 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 886 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 886 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-h 886-D1622\n\n\n
...
Available
£1494.43
https://youtu.be/TPnf 7M5gyy 8\n\n Delivering enterprise performance at SMB prices, the TS-h 886 features an Intel Xeon D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 886 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 886 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 886 uses an Intel Xeon D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 886 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 886 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 886 means that you can maximize both your storage capacity & performance. \n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 886 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 886 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 886 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 886 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 886 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 886 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 886 to upgrade your storage infrastructure.\n\n\n\n\n\n Product Model: TS-h 886-D1622\n\n\n
...
Available
£2147.60
https://www.youtube.com/embed/P-j Bhvtn A9I\n\n Enhance business productivity using the quad-core 9-bay Qu TS hero NAS that supports U.2 NVMe SSD & 10 Gb E/2.5 Gb E connectivity\n\n Featuring an AMD Ryzen&132;&162; V1000 series V1500B quad-core processor & 10 Gb E/2.5 Gb E connectivity, the 9-bay TS-h 973AX packs a high-capacity hybrid storage infrastructure into a compact physical footprint. With five 3.5-inch SATA 6 Gbps drive bays, two 2.5-inch U.2 NVMe SSD slots (Slot 1 & 2 support both U.2 NVMe & SATA SSDs ), & two 2.5-inch SATA 6 Gbps SSD slots, the TS-h 973AX can benefit from SSD caching to boost IOPS-intensive applications. With the ZFS-based Qu TS hero operating system, the TS-h 973AX ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync to satisfy mission-critical file servers, virtualization servers, collaborative video editing, & efficient data backup & recovery with business-class performance, job reliability, & lower overall cost.\n\n Absolute performance with AMD Ryzen&132;&162; & up to 64 GB RAM\n Powered by an AMD Ryzen&132;&162; Embedded V1000 series V1500B 4-core/8-thread, 2.2 GHz processor with up to 64 GB DDR4 RAM (ECC memory is supported)*, the TS-h 973AX delivers aggressive yet power-smart performance for compute-demanding applications. AES-NI encryption support boosts encryption performance while also maintaining the security of your NAS data. SSDs can be flexibly installed for cache acceleration to maximize network & storage performance for data-intensive applications.\n\n Dual U.2 NVMe PCIe Gen 3 x 4 SSD slots for optimal I/O & low latency\n The TS-h 973AX has four 2.5-inch SSD slots
- with slots 1 & 2 supporting both high-performance U.2 NVMe PCIe Gen 3 x 4 SSDs or economical SATA 6 Gb/s SSDs. For tackling latency-sensitive applications, you can take advantage of U.2 NVMe PCIe Gen 3 x 4 SSDs that supply up to 32 Gb/s bandwidth to attain optimized performance & efficiency. You can also use QNAP&153;s QDA-UMP adapter to replace U.2 NVMe SSDs with cost-efficient M.2 NVMe Gen 3 x 4 SSDs to maintain high-level performance while saving more costs.\n\n Streamline large file transfers & video editing with 10 Gb E & 2.5 Gb E\n The TS-h 973AX has one 10GBASE-T Multi-Gig (10G/5G/2.5G/1G/100M) port & two 2.5 Gb E RJ45 (2.5G/1G/100M) ports, providing out-of-the-box support for high-speed networking & supporting Port Trunking & Failover to reinforce your network infrastructure. QNAP also provide many other high-speed networking solutions, including 10 Gb E/2.5 Gb E managed/unmanaged switches, 2.5 Gb E/5 Gb E/10 Gb E PCIe cards & USB (Universal Serial Bus) 5 Gb E adapters for Windows&174;/ Linux&174; workstations, allowing you to build a budget-friendly high-speed network environment for productive team collaboration.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 973AX optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n The TS-h 973AX also supports snapshots & remote backup to help organizations accomplish routine backup tasks cost-effectively & efficiently.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 973AX to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n Virtualization Station\n Run multiple Windows&174;, Linux&174;, UNIX&174;, & Android&132;&162; virtual machines & access them via a web browser or Virtual Network Computing (VNC). Businesses can run virtualized server applications on a single NAS without the need for additional physical servers.\n Container Station\n Experience LXC & Docker&174; lightweight virtualization technologies, download apps from the built-in Docker Hub Registry&174;, import & export containers, & create abundant microservices.\n\n License-free VMware&174; & Hyper-V backup appliance\n With Hyper Data Protector, the TS-h 973AX becomes an agentless backup tool for unlimited VMware&174; v Sphere & Microsoft&174; Hyper-V VM backup. Hyper Data Protector features incremental backup, global deduplication, backup scheduling & recovery compression. Hyper Data Protector also simultaneously backs up multiple VMs, providing you with a cost-effective & reliable disaster recovery plan, ensuring 24/7 operation of your services.\n\n More productivity applications\n\n Ubuntu Linux Station\n Run Ubuntu&174; applications (including apps from the Ubuntu Software Center) directly on the TS-h 973AX & remotely access the Ubuntu&174; desktop from a web browser.\n Security Counselor\n A security portal for checking weaknesses & receiving recommendations for enhancing NAS security. It also integrates anti-virus & anti-malware scanning software.\n Boxafe\n Safeguard enterprise cloud data by backing up/syncing files, emails, calendars & contacts from Google&132;&162; Workspace & Microsoft&174; Office 365&174; to the TS-h 973AX.\n Qsirch\n QNAP&153;s powerful, Google-like search tool helps you quickly find images, music, videos, documents, & emails by keywords, color, & more search conditions. It also supports Qfiling to perform one-time or automatic archival tasks based on your search criteria.\n Qu Magie\n An AI-powered photo management app, supporting automated photo categorization with AI Albums, i OS&174; Live Photo display, & powerful search tool for ultimate photo management & sharing solution.\n Hybrid Mount\n Perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the NAS, you can seamlessly use the cloud for storage, backup, & data recovery with low-latency access.\n\n Flexible & economical storage expansion\n The storage capacity of the TS-h 973AX can be expanded using USB (Universal Serial Bus)-based expansion enclosures. Two QNAP TR RAID (4-bay TR-004, 2-bay TR-002) can be easily attached & managed using the Storage & Snapshots Manager app.\n\n Subscribe to QVR Elite surveillance solution for 24/7 security\n QVR Elite is QNAP&153;s subscription-based smart surveillance solution, allowing you to easily build a surveillance system with lower TCO & higher scalability. You can arrange a dedicated, independent storage space for surveillance data on the TS-h 973AX & enjoy simplified camera management, storage space allocation, camera live viewing & playback. Recordings are saved as MP4 files, allowing playback on nearly every device. QVR Elite also integrates QNAP AI-based solutions to build smart facial recognition for retail & door access systems with QNAP NAS. With QVR Pro Client software installed on your Windows&174;/ Mac&174; or mobile devices, taking full control over monitored areas becomes more convenient & easier.\n\n Switch operating systems to upgrade your current storage\n The TS-h 973AX can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 973AX to upgrade your storage infrastructure & take advantage of Qtier auto-tiering from QTS.\n\n\n\n\n\n Product Model: TS-h 973AX\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_91316749_1619674923_812_105.pdf\n\n

...
Available
£1984.14
Enhance business productivity using the quad-core 9-bay Qu TS hero NAS that supports U.2 NVMe SSD & 10 Gb E/2.5 Gb E connectivity Featuring an AMD Ryzen&132;&162; V1000 series V1500B quad-core processor & 10 Gb E/2.5 Gb E connectivity, the 9-bay TS-h 973AX packs a high-capacity hybrid storage infrastructure into a compact physical footprint. With five 3.5-inch SATA 6 Gbps drive bays, two 2.5-inch U.2 NVMe SSD slots (Slot 1 & 2 support both U.2 NVMe & SATA SSDs ), & two 2.5-inch SATA 6 Gbps SSD slots, the TS-h 973AX can benefit from SSD caching to boost IOPS-intensive applications. With the ZFS-based Qu TS hero operating system, the TS-h 973AX ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync to satisfy mission-critical file servers, virtualization servers, collaborative video editing, & efficient data backup & recovery with business-class performance, job reliability, & lower overall cost. Absolute performance with AMD Ryzen&132;&162; & up to 64 GB RAM Powered by an AMD Ryzen&132;&162; Embedded V1000 series V1500B 4-core/8-thread, 2.2 GHz processor with up to 64 GB DDR4 RAM (ECC memory is supported)*, the TS-h 973AX delivers aggressive yet power-smart performance for compute-demanding applications. AES-NI encryption support boosts encryption performance while also maintaining the security of your NAS data. SSDs can be flexibly installed for cache acceleration to maximize network & storage performance for data-intensive applications. Dual U.2 NVMe PCIe Gen 3 x 4 SSD slots for optimal I/O & low latency The TS-h 973AX has four 2.5-inch SSD slots
- with slots 1 & 2 supporting both high-performance U.2 NVMe PCIe Gen 3 x 4 SSDs or economical SATA 6 Gb/s SSDs. For tackling latency-sensitive applications, you can take advantage of U.2 NVMe PCIe Gen 3 x 4 SSDs that supply up to 32 Gb/s bandwidth to attain optimized performance & efficiency. You can also use QNAP&153;s QDA-UMP adapter to replace U.2 NVMe SSDs with cost-efficient M.2 NVMe Gen 3 x 4 SSDs to maintain high-level performance while saving more costs. Streamline large file transfers & video editing with 10 Gb E & 2.5 Gb E The TS-h 973AX has one 10GBASE-T Multi-Gig (10G/5G/2.5G/1G/100M) port & two 2.5 Gb E RJ45 (2.5G/1G/100M) ports, providing out-of-the-box support for high-speed networking & supporting Port Trunking & Failover to reinforce your network infrastructure. QNAP also provide many other high-speed networking solutions, including 10 Gb E/2.5 Gb E managed/unmanaged switches, 2.5 Gb E/5 Gb E/10 Gb E PCIe cards & USB (Universal Serial Bus) 5 Gb E adapters for Windows&174;/ Linux&174; workstations, allowing you to build a budget-friendly high-speed network environment for productive team collaboration. ZFS-based Qu TS hero operating system enhances NAS performance & data integrity Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks. Inline data deduplication, compression, & compaction drives big data storage efficiency Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 973AX optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era. Real-time Snap Sync ensures minimal RPO with real-time disaster recovery Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss. The TS-h 973AX also supports snapshots & remote backup to help organizations accomplish routine backup tasks cost-effectively & efficiently. Snapshots multiply backup protection Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control. HBS simplifies 3-2-1 backup plans HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 973AX to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster. All-in-one virtual machine & container hosting solution You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment. Virtualization Station Run multiple Windows&174;, Linux&174;, UNIX&174;, & Android&132;&162; virtual machines & access them via a web browser or Virtual Network Computing (VNC). Businesses can run virtualized server applications on a single NAS without the need for additional physical servers. Container Station Experience LXC & Docker&174; lightweight virtualization technologies, download apps from the built-in Docker Hub Registry&174;, import & export containers, & create abundant microservices. License-free VMware&174; & Hyper-V backup appliance With Hyper Data Protector, the TS-h 973AX becomes an agentless backup tool for unlimited VMware&174; v Sphere & Microsoft&174; Hyper-V VM backup. Hyper Data Protector features incremental backup, global deduplication, backup scheduling & recovery compression. Hyper Data Protector also simultaneously backs up multiple VMs, providing you with a cost-effective & reliable disaster recovery plan, ensuring 24/7 operation of your services. More productivity applications Ubuntu Linux Station Run Ubuntu&174; applications (including apps from the Ubuntu Software Center) directly on the TS-h 973AX & remotely access the Ubuntu&174; desktop from a web browser. Security Counselor A security portal for checking weaknesses & receiving recommendations for enhancing NAS security. It also integrates anti-virus & anti-malware scanning software. Boxafe Safeguard enterprise cloud data by backing up/syncing files, emails, calendars & contacts from Google&132;&162; Workspace & Microsoft&174; Office 365&174; to the TS-h 973AX. Qsirch QNAP&153;s powerful, Google-like search tool helps you quickly find images, music, videos, documents, & emails by keywords, color, & more search conditions. It also supports Qfiling to perform one-time or automatic archival tasks based on your search criteria. Qu Magie An AI-powered photo management app, supporting automated photo categorization with AI Albums, i OS&174; Live Photo display, & powerful search tool for ultimate photo management & sharing solution. Hybrid Mount Perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the NAS, you can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. Flexible & economical storage expansion The storage capacity of the TS-h 973AX can be expanded using USB (Universal Serial Bus)-based expansion enclosures. Two QNAP TR RAID (4-bay TR-004, 2-bay TR-002) can be easily attached & managed using the Storage & Snapshots Manager app. Subscribe to QVR Elite surveillance solution for 24/7 security QVR Elite is QNAP&153;s subscription-based smart surveillance solution, allowing you to easily build a surveillance system with lower TCO & higher scalability. You can arrange a dedicated, independent storage space for surveillance data on the TS-h 973AX & enjoy simplified camera management, storage space allocation, camera live viewing & playback. Recordings are saved as MP4 files, allowing playback on nearly every device. QVR Elite also integrates QNAP AI-based solutions to build smart facial recognition for retail & door access systems with QNAP NAS. With QVR Pro Client software installed on your Windows&174;/ Mac&174; or mobile devices, taking full control over monitored areas becomes more convenient & easier. Switch operating systems to upgrade your current storage The TS-h 973AX can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 973AX to upgrade your storage infrastructure & take advantage of Qtier auto-tiering from QTS.\n\n\n\n Storage Total installed storage capacity 60 TBOnline RAID migration Yes Online RAID expansion Yes Disk roaming Yes Bad block scan Yes Storage drives installed Yes Installed storage drive type HDDNumber of storage drives installed 5 Supported storage drive types HDD & SSDNumber of storage drives supported 9 Storage drive interface Serial ATA II, Serial ATA IIIStorage drive capacity 12000 GBStorage drive size 2.5/3.5" Hot-swap drive bays Yes RAID support Yes Supported file systems FAT32, HFS+, NTFS, ZFS, ex FAT, ext 3, ext 4RAID levels 0, 1, 5, 6, 10, 50, 60, JBODSupported storage drive interfaces Serial ATA II, Serial ATA IIIStorage drive sizes supported 2.5, 3.5"RAID rebuild Yes Processor Processor manufacturer AMDProcessor threads 8 Processor frequency 2.2 GHz Processor family Ryzen Embedded Processor model V1500 B Processor cores 4 Memory Internal memory type DDR4 Internal memory 32 GBMaximum RAM supported 64 GBMemory slots 2 Flash memory 5000 MBMemory form factor SO-DIMMECCYes Network Load balancing system Yes Link aggregation Yes Ethernet LAN data rate supported (max)10000 Mbit/s Dynamic DNS (DDNS) Yes Ethernet LANYes Ethernet LAN data rates 100, 1000, 2500, 5000, 10000 Mbit/s Wake-on-LAN ready Yes Jumbo frames support Yesi SCSI support Yes DHCP server Yes DHCP client Yes WLAN adapter supported Yes Ports & interfaces USB port Yes Ethernet LAN (RJ-45) ports 3USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity 3USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity 1 Hard drive RAID support Yes Supported file systems FAT32, HFS+, NTFS, ZFS, ex FAT, ext 3, ext 4RAID levels 0, 1, 5, 6, 10, 50, 60, JBODDesign Cooling type Active Fan diameter 14 cm Drive bay locking Yes Cable lock slot type Kensington Product colour Black Number of fans 1 fan (s)LED indicators HDD, LAN, Power, SSD, Status, USBChassis type Tower Cable lock slot Yes Technical details Type NASDevice class Small & Medium Business Backup function Yes Backup features Cloud, i SCSI LUNProduct colour Black Number of users 2000 user (s) Noise level 22.9 d B Multilingual support Yes LED indicators HDD, LAN, Power, SSD, Status, USBChassis type Tower Buzzer Yes Number of fans 1 fan (s) Performance Built-in UPn P AV media server Yes Built-in FTP server Yes System log Yes Share folder access right management Yes Share folder AFP, CIFS/SMB, FTP, Web DAVS.M.A.R.T. support Yes Password authentication Yes Hot spare Yes Disk scan Yes Browser supported Safari, Chrome, Internet Explorer, Firefox Built-in Bit Torrent client Yes Type NASDevice class Small & Medium Business Backup function Yes Backup features Cloud, i SCSI LUNOn/off switch Yes Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Other operating systems supported Yes Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Web-based management Yes Security algorithms 256-bit AES, FIPS 140-2, HTTPS, SSH, SSL/TLSReset button Yes Operating system version 4.5.0 Operating system installed Qu TS hero Number of users 2000 user (s) Noise level 22.9 d B Multilingual support Yes Management protocols SNMPBuzzer Yes Access Control List (ACL) Yes Third-party support Yes Snapshot Yes USB copy function Yes Cooling Cooling type Active Fan diameter 14 cm Fan voltage 12 VNumber of fans 1 fan (s) Security Drive bay locking Yes Cable lock slot type Kensington Security algorithms 256-bit AES, FIPS 140-2, HTTPS, SSH, SSL/TLSCable lock slot Yes Access Control List (ACL) Yes Software Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Other operating systems supported Yes Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Operating system version 4.5.0 Operating system installed Qu TS hero Management features On/off switch Yes Web-based management Yes Reset button Yes Management protocols SNMPPower Power consumption (HDD standby)41.2 WPower supply location External Power supply unit (PSU) capacity 120 WFan voltage 12 VAC input voltage 100
- 240 VPower consumption (typical)55.41 WNumber of power supply units 1 External power adapter Yes Weight & dimensions Width 224.6 mm Depth 224.1 mm Height 182.7 mm Packaging content Number of screws 56 External power adapter Yes Cables included AC, LAN (RJ-45) Power cables quantity 1 System requirements Windows operating systems supported Windows 10, Windows 7, Windows 8 Server operating systems supported Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Other operating systems supported Yes Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina Linux operating systems supported Yes Operational conditions Storage temperature (T-T)-20
- 70 &176;CStorage relative humidity (H-H)5
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)5
- 95% Packaging data Cables included AC, LAN (RJ-45)\n\n\n\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/uploads/pdf/mmo_91316665_1619674915_9386_23311.pdf






...
Available

QNAP TS-H686-D1602-8G NAS Tower Ethernet LAN Black D-1602

Delivering enterprise performance at SMB prices, the TS-h686 features an Intel&174; Xeon&174; D processor and DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based QuTS hero operating system, the TS-h686 ensures data integrity and supports block-level inline data deduplication and compression, near-limitless snapshots, and real-time SnapSync. The TS-h686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup and recovery applications.\n\nPowerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\nThe TS-h686 uses an Intel Xeon&174; D-1600 series processor and
DDR4 ECC memory that can detect and correct single-bit memory errors as they occur to prevent downtime and data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h686 provides a high-performance and reliable NAS solution for demanding business IT environments.\n\nSet SSD caching to boost IOPS with M.2 NVMe SSD\nWhile SSD prices continue to fall, and SSD capacity and performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h686 comes with two 2.5-inch SSD drive bays and two M.2 NVMe Gen3 x4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance and reduce storage volume latency. This is especially perfect for databases and virtual machine applications. Without occupying any 3.5-inch drive
bays, the TS-h686 allows you to maximize both your storage capacity and performance.\n\nQuad-port 2.5GbE meets today&153;s high-bandwidth demands\nFeaturing four native 2.5GbE RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h686 allows you to use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking and failover further satisfies bandwidth and reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, and any real-time application. QNAP also offers numerous options of managed and unmanaged 10GbE/2.5GbE switches, assisting organizations in implementing high-speed, secure and scalable network environments without going over budget.\n\nZFS-based QuTS hero operating
system enhances NAS performance and data integrity\nQuTS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, and optimized performance to tackle the complexity and performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, QuTS hero streamlines your business-critical tasks.\n\nTiered storage configuration for a QuTS hero NAS\nFollow these steps to acquire optimal storage efficiency and performance for QuTS hero.\n\nStep 1: System Drive\nThe first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\nStep 2: Read Cache & ZIL\nUse more SSDs for read cache or ZIL. You can also install
QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\nStep 3: Data Storage\nAllocate HDDs/SSDs to create a RAID for storing files and application data. If needed, you can configure an all-flash configuration for optimal performance.\n\nInline data deduplication, compression, and compaction drives big data storage efficiency\nQuTS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, and compaction) to reduce file sizes, conserve storage capacity, and optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h686 optimizes
storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\nReal-time SnapSync ensures minimal RPO with real-time disaster recovery\nReal-time SnapSync ensures that both the primary and secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. SnapSync provides the strongest support for nonstop business operations and helps users to reduce the risk of data loss.\n\nSnapshots multiply backup protection\nAttain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data
writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\nHBS simplifies 3-2-1 backup plans\nHBS centralizes backup, restoration, and synchronization for easily transferring data in the TS-h686 to another QNAP NAS, remote server, or cloud storage space. HBS supports QuDedup technology that eliminates redundant data at the source and makes multi-version backup faster.\n\nAll-in-one virtual machine and container hosting solution\nYou can count on Virtualization Station and Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, and other physical devices on the network, you can flexibly
allocate physical and virtual network resources to simplify network deployment.\n\nPCIe expansion for upgrading 10GbE transmission or enabling GPGPU computing\nThe TS-h686 features two PCIe Gen 3 x8 slots (each slot provides up to 64 Gb/s bandwidth) and supports installing expansion cards to enable additional functions and greater application potential.\n\nMove business data to the cloud and enjoy low latency access to cloud-based data\nThe TS-h686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways and enabling local caching on the TS-h686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, and data recovery with low-latency access. This greatly helps in realizing cost-effective,
flexible and secure hybrid cloud applications.\n\nSwitch operating systems to upgrade current storage\nThe TS-h686 can also switch to using QTS - QNAP&153;s standard NAS operating system. This allows you to migrate drives from your current QTS-based NAS to the more powerful TS-h686 to upgrade your storage infrastructure.\n\n\n\n\n\n\n\nModel: TS-H686-D1602-8G\n\n\n\n\n\n\n\n
Availability: In Stock
£1850.91

Product Description

Delivering enterprise performance at SMB prices, the TS-h 686 features an Intel&174; Xeon&174; D processor & DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based Qu TS hero operating system, the TS-h 686 ensures data integrity & supports block-level inline data deduplication & compression, near-limitless snapshots, & real-time Snap Sync. The TS-h 686 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup & recovery applications.\n\n Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory\n The TS-h 686 uses an Intel Xeon&174; D-1600 series processor & DDR4 ECC memory that can detect & correct single-bit memory errors as they occur to prevent downtime & data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h 686 provides a high-performance & reliable NAS solution for demanding business IT environments.\n\n Set SSD caching to boost IOPS with M.2 NVMe SSD\n While SSD prices continue to fall, & SSD capacity & performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h 686 comes with two 2.5-inch SSD drive bays & two M.2 NVMe Gen 3 x 4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance & reduce storage volume latency. This is especially perfect for databases & virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h 686 means that you can maximize both your storage capacity & performance.\n\n Quad-port 2.5 Gb E meets today&153;s high-bandwidth demands\n Featuring four native 2.5 Gb E RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h 686 means that you can use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking & failover further satisfies bandwidth & reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, & any real-time application. QNAP also offers numerous options of managed & unmanaged 10 Gb E/2.5 Gb E switches, assisting organizations in implementing high-speed, secure & scalable network environments without going over budget.\n\n ZFS-based Qu TS hero operating system enhances NAS performance & data integrity\n Qu TS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, & optimized performance to tackle the complexity & performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, Qu TS hero streamlines your business-critical tasks.\n\n Tiered storage configuration for a Qu TS hero NAS\n Follow these steps to acquire optimal storage efficiency & performance for Qu TS hero.\n\n Step 1: System Drive\n The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.\n\n Step 2: Read Cache & ZIL\n Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.\n\n Step 3: Data Storage\n Allocate HDDs/SSDs to create a RAID for storing files & application data. If needed, you can configure an all-flash configuration for optimal performance.\n\n Inline data deduplication, compression, & compaction drives big data storage efficiency\n Qu TS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, & compaction) to reduce file sizes, conserve storage capacity, & optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h 686 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.\n\n Real-time Snap Sync ensures minimal RPO with real-time disaster recovery\n Real-time Snap Sync ensures that both the primary & secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. Snap Sync provides the strongest support for nonstop business operations & helps users to reduce the risk of data loss.\n\n Snapshots multiply backup protection\n Attain peace of mind with near-limitless, instant snapshots. Copy-on-write technology makes snapshot creation almost instantaneous without affecting ongoing data writing. Snapshot Replica replicates snapshot files to the backup NAS, simplifying data protection with version control.\n\n HBS simplifies 3-2-1 backup plans\n HBS centralizes backup, restoration, & synchronization for easily transferring data in the TS-h 686 to another QNAP NAS, remote server, or cloud storage space. HBS supports Qu Dedup technology that eliminates redundant data at the source & makes multi-version backup faster.\n\n All-in-one virtual machine & container hosting solution\n You can count on Virtualization Station & Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, & other physical devices on the network, you can flexibly allocate physical & virtual network resources to simplify network deployment.\n\n PCIe expansion for upgrading 10 Gb E transmission or enabling GPGPU computing\n The TS-h 686 features two PCIe Gen 3 x 8 slots (each slot provides up to 64 Gb/s bandwidth) & supports installing expansion cards to enable additional functions & greater application potential.\n\n Move business data to the cloud & enjoy low latency access to cloud-based data\n The TS-h 686 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways & enabling local caching on the TS-h 686 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, & data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible & secure hybrid cloud applications.\n\n Switch operating systems to upgrade current storage\n The TS-h 686 can also switch to using QTS
- QNAP&153;s standard NAS operating system. This means that you can migrate drives from your current QTS-based NAS to the more powerful TS-h 686 to upgrade your storage infrastructure.\n\n\n\n\n\n\n\n Model: TS-H686-D1602-8G\n\n\n\n\n\n\n\n

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LAN - Local Area Network
RAM - Random Access memory
RJ45 - A computer networking connection. A small square shaped connector.
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
Inch - Equivalent to approximately 2.5cm
Physical - Used to describe strength or visual properties of an item
Intel - World leaders in silicon chip development and manufacture. Chips for Laptops, desktops and mobile devices. Their main competitor is AMD (Advanced Micro Devices)
speed - A measurement of how fast an object travels between two points
Network - A link and communication between things. Often computers or people.
Large - something that takes up more space than normal.
Install - A process of putting materials together to create a finished product.
Processor - A part of a computer or machine that processes functions,
Reliable - Something that is consistently good and can be trusted.
Replica - A copy or duplicate of something.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Primary - the beginning of something, of chief importance.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Memory - A way to describe the way in which the brain can remember things.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu