\n Veracity POINTSOURCE Plus Fast Ethernet 48 V\n \n \n \n \n \n \n Manufacturer:\n Veracity\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Po E Adapters\n \n \n SKU:\n VAD-PSP\n \n \n EAN:\n 0892314002494 5712505909362 5057103139262 5060520218212\n \n \n \n \n\n Description\n \n \n Portable, Rechargeable, Power Where You Need It\n\n Veracity&153;s POINTSOURCE Plus is a portable, rechargeable battery
- powered POE (Power over Ethernet) injector. It is designed for field use, being compact, easy to handle, with a useful shoulder strap, which leaves your hands free. It can deliver enough power to support a full day&153;s IP camera installation work.\n\n POINTSOURCE Plus provides a similar functionality to Veracity&153;s PINPOINT, but

Includes:: a built-in POE power source to allow installation & set-up of IP cameras before POE power is available through the network.\n\n\n\n On Site Configuration\n\n The most common application for POINTSOURCE Plus is the in-situ configuration, set-up & fine adjustment of IP cameras on an installation site. By simply connecting a laptop to the IP camera through POINTSOURCE Plus, all aspects of the camera image (focus, direction, aperture, zoom, resolution, compression etc.) can easily be viewed & adjusted.\n\n\n\n On Site Surveys & Pre-Installation Trials\n\n POINTSOURCE Plus allows the rapid set-up of an IP camera during site surveys, allowing the integrator to capture snapshots or video clips of the actual on-site scenes for presentation to the prospective end-user. This is an effective example of the saying "A picture paints a thousand words.&157;\n\n\n\n Customer Demonstrations Can Be Given Anywhere\n\n Any new IP camera can very quickly be demonstrated to a client or consultant using just the camera, a laptop & the POINTSOURCE Plus package. No external power or network switch is required, allowing demonstrations to be done anywhere, from a caf&169; table top to a desert road.\n\n\n\n Mobile & Temporary Installations\n\n A POINTSOURCE Plus & IP camera with an SD-card slot are all that is required for a very compact & easily transported temporary IP video surveillance recording system.\n\n\n\n POE & POE Plus\n\n POINTSOURCE Plus complies with universal IEEE 802.3af & IEEE 802.3at POE standards, & can deliver up to 25 watts of POE power. Integrated network crossover ports allow the direct connection of a laptop (shown in the diagram opposite).\n\n\n\n USB Charging Point\n\n A convenient 5V USB (Universal Serial Bus) port is provided for charging smart phones & tablets, whilst on site. The USB (Universal Serial Bus) port has no data connection function.\n\n\n\n LED Indicator\n\n The POE port LED indicates when POE is being delivered to a compatible device connected to the Camera port. If an incompatible device is connected (or needs too much power) then the red LED will flash indicating the problem.\n\n\n\n Removable Battery Module\n\n POINTSOURCE Plus has a removable, rechargeable battery module which provides enough power for a full day&153;s installation work. The battery module is removed for recharging purposes. Additional battery modules are also available as an option.\n\n\n\n Battery Life & Status\n\n POINTSOURCE Plus has a battery life of 3 to 5 years, or 200
- 1000 cycles depending upon discharge depth & operating temperature. The battery status indicator shows the remaining charge in steps of 25%. The simple design of the system allows the removable battery to be recharged whilst POINTSOURCE Plus continues to be used with a second battery.\n \n \n\n Specifications\n \n Networking Networking standards IEEE 802.3af, IEEE 802.3at Power over Ethernet (Po E) Yes Ethernet LAN data rates 10, 100 Mbit/s Ethernet interface type Fast Ethernet Power over Ethernet (Po E) voltage 48 VFeatures Product colour Black, White Networking standards IEEE 802.3af, IEEE 802.3at LED indicators Yes Certification EN 55022 Class B, FCC Part 15 Subpart B Class A + B, ICES-003 Class B, VCCI Class B, C-tick S/NZS CISPR 22 Class B, IEC/EN/UL 60950-1, CE, Ro HS, REACH, WEEEPorts & interfaces Ethernet LAN (RJ-45) ports 2 Other connection USB Type APower Power over Ethernet (Po E) voltage 48 VTechnical details Number of products included 1 pc (s) Package width 190 mm Package length 29 cm Package height 270 mm Power over Ethernet (Po E) Yes Ethernet LAN data rates 10, 100 Mbit/s Ethernet interface type Fast Ethernet Other connection USB Type AOperational conditions Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)20
- 85% Operating temperature (T-T)0
- 50 &176;CWeight & dimensions Package weight 3.2kg Package width 190 mm Package length 29 cm Package height 270 mm Weight 2.2kg Dimensions (Wx Dx H)100 x 205 x 150 mm Packaging content Power cord included Yes Quick installation guide Yes Manual Yes Number of products included 1 pc (s) Packaging data Package weight 3.2kg Package width 190 mm Package length 29 cm Package height 270 mm Certificates Certification EN 55022 Class B, FCC Part 15 Subpart B Class A + B, ICES-003 Class B, VCCI Class B, C-tick S/NZS CISPR 22 Class B, IEC/EN/UL 60950-1, CE, Ro HS, REACH, WEEEIndication LED indicators Yes\n \n \n\n\n\n\n\n






...

\n Veracity VAD-PP networking card Ethernet 100 Mbit/s\n \n \n \n \n \n \n Manufacturer:\n Veracity\n \n \n Category:\n Computer Components\n \n \n Sub-Category:\n Networking Cards\n \n \n SKU:\n VAD-PP\n \n \n EAN:\n 0892314002166 5054484475989 5052180113730 5053959453859 5704327670858 5060520218205\n \n \n \n \n\n Description\n \n \n The Veracity Pinpoint IP Camera Setup Adaptor is an IP video installation tool for viewing & configuration of IP Po E cameras using a laptop or other portable device, without removing the camera from the network & losing Po E power. Compared to the trial-&-error process where an installer works with a partner in the control room communicating via phone or radio, the adaptor can be installed by a single installer in less time enabling precise camera configuration for the best image possible.\n\n\n\n Universally compatible, the Pinpoint IP Camera Setup Adaptor supports IEEE 802.3af Po E, POE Plus, non-standard types of Po E up to 30W, 10BASE-T & 100BASE-TX Ethernet. The compact adaptor (65 x 32 x 20 mm) also features an LED that indicates Po E.\n\n\n\n- IP video installation tool for viewing & configuration of an IP Po E camera using a laptop or other portable device\n\n- Installation without removing camera from the network & losing Po E power\n\n- Time-saving method for accurately focusing IP Po E cameras with a standard Cat 5E patch cable\n\n- IEEE 802.3af Po E, POE Plus, non-standard types of Po E up to 30W, 10BASE-T & 100BASE-TX Ethernet\n\n- Compact adaptor (65 x 32 x 20 mm)\n\n- LED indicator for Po E\n \n \n\n Specifications\n \n Ports & interfaces Internal No Connector (s)2 x Po E RJ-45, 1 x RJ-45 Ethernet LAN (RJ-45) ports 3 Interface Ethernet Host interface RJ-45 Connectivity technology Wired Bandwidth Maximum data transfer rate 100 Mbit/s Indication Power LEDYes Link/ Act LEDYes LED indicators Yes Networking Ethernet LANYes Cabling technology 10/100 Base T (X) Networking standards IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Maximum data transfer rate 100 Mbit/s Design Certification CE, FCCInternal No LED indicators Yes Ro HS compliance Yes Operational conditions Operating temperature (T-T)-10
- 70 &176;CWeight & dimensions Width 65 mm Depth 32 mm Height 20 mm Weight 58 g Certificates Certification CE, FCCRo HS compliance Yes Other features Power LEDYes Link/ Act LEDYes Connector (s)2 x Po E RJ-45, 1 x RJ-45\n \n \n\n\n\n\n\n
...

\n Veracity VHW-HWPS-B network media converter 100 Mbit/s Internal Blue\n \n \n \n \n \n \n Manufacturer:\n Veracity\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Media Converters\n \n \n SKU:\n VHW-HWPS-B\n \n \n EAN:\n 0892314002210 5711045156182 5052184102563 5054629915523\n \n \n \n \n\n Description\n \n \n Fast Ethernet & POE power over coax video cable\n\n HIGHWIRE POWERSTAR lets you install IP cameras easily, quickly, & reliably, without the disruption & expense of installing new cable.\n\n\n\n Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested & trusted by thousands of IP installers worldwide over the past five years.\n\n\n\n And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies.\n\n\n\n Simply add power\n\n With no configuration or measurement required, installation of HIGHWIRE Power Star is as straightforward as plugging it in.\n\n\n\n Two models are used, as shown in the diagram below. The BASE unit receives POE power & transmits it down the coax. The CAMERA unit receives power from the coax & delivers up to full POE Plus power to the IP camera.\n\n\n\n If Po E is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.\n\n\n\n Installer friendly\n\n For fast installation & guaranteed performance, HIGHWIRE POWERSTAR features Veracity's unique Safe View display.\n\n\n\n Safe View provides an instant & easy-to-understand confirmation of network & power status right across the cable, with no need to access remote equipment to check connections.\n\n\n\n Meanwhile, safe & compliant detection of POE equipment & POE over coax compatibility ensures correct operation, with no risk of damage to non-POE or legacy analog equipment.\n\n\n\n Reliability assured\n\n Because the length & quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.\n\n\n\n However, thanks to HIGHWIRE POWERSTAR's ultra low-power design & efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation. & once connected, the Safe View power display instantly reaffirms that the actual power available to the camera is sufficient.\n\n\n\n For predictable network performance, HIGHWIRE's proven technology delivers full network bandwidth, right to the limits of range. & secure screw-terminal DC connections, or the option of using a UPS-backed POE source, provide the last link in assuring continuous power delivery.\n \n \n\n Specifications\n \n Technical details Maximum transfer distance 500 m Internal Yes Performance Auto-negotiation Yes Maximum transfer distance 500 m Networking Auto-negotiation Yes Converter input interface 100 Base-TNetworking standards IEEE 802.3af, IEEE 802.3at Ethernet LAN data rates 100 Mbit/s Duplex system Full Maximum data transfer rate 100 Mbit/s Ports & interfaces BNC ports quantity 1 Connectivity technology Wired Ethernet LAN (RJ-45) ports 1 Indication LED indicators Yes Design Ro HS compliance Yes LED indicators Yes Product colour Blue Certification FCC, CE, Ro HSInternal Yes Power Power consumption (max)25 WPower over Ethernet (Po E) Yes Input voltage 40
- 57 VInput current 0.7 APower consumption (typical)1.5 WColour Product colour Blue Weight & dimensions Width 54 mm Depth 103 mm Weight 50 g Height 25 mm Package depth 130 mm Package width 75 mm Package height 32 mm Package weight 70 g Operational conditions Operating temperature (T-T)-10
- 50 &176;CStorage relative humidity (H-H)0
- 85% Packaging data Package depth 130 mm Package width 75 mm Package height 32 mm Package weight 70 g Packaging content Quick installation guide Yes Manual Yes Certificates Ro HS compliance Yes Certification FCC, CE, Ro HS\n \n \n\n\n\n\n\n


...

The world has gone digital. Digital cameras, digital portable music, digital data
- they all require a digital media which is
...

Currently the smallest form factor of memory card available, the micro SDHC memory cards are designed especially for mobile phones, this tiny memory card consumes very little power, therefore preserving the battery life of your mobile phone. It can also be used in GPS devices, MP3 players, digital cameras & PDA's. The list of compatible devices grows daily & Verbatim micro SD memory cards are compatible with all devices that have an SDHC slot when used with the SD adaptor. All cards contain the latest copyright management technology to ensure legal transfer of digital assets (pictures, movies, music etc...) over computer networks for personal use. SD High Capacity (SDHC) is the new SD memory card based on the SDA 2.0

Specification & larger than 2GB capacity. Benefits include, larger capacity & higher data transfer speed. The Speed Class

Specification classifies performance by Class number & offers the method to calculate its performance. The Class 10

Specification indicates a minimum data transfer speed of 10MB/ Sec.





...

Easily add more storage options to your netbook or notebook computer with Verbatim′s stay-in Store ?n′ Stay USB (Universal Serial Bus) drive. Allowing storage in a drive that fits in the body of a Nano receiver, the USB (Universal Serial Bus) drive features a snag-free design for easy transport, which is also removable for easy file sharing. Compatible with Windows 7 & Vista, the Store 'n' Stay USB (Universal Serial Bus) offers a USB (Universal Serial Bus) 2.0 interface that is a great addition to any netbook. This always there, always ready USB (Universal Serial Bus) flash drive is available in capacities of 4GB, 8GB, & 16GB. ...

- 3.5'' Hard Drive Enclosure;
- Fits any standard 3.5'' internal SATA hard drive;
- Easy Installation, no advanced technical

...

The micro SDHC™ card is the most popular removable storage solution for mobile devices. Verbatim micro SDHC memory cards are compatible with all micro SDHC slot-equipped devices. By using the included micro SDHC to SDHC adapter, you can also use the micro SDHC card in any SDHC slot equipped camera, card reader or computer.
- For use in micro SDHC host devices only
-

Includes:: adapter for use in SDHC card slots
- Write protect feature on adapter prevents accidental erasure
- Verbatim Limited Lifetime Warranty





...

Datasheet: http://store.cmsdistribution.com/product-files/datasheet/249928.pdf\n\n Warranty: 24 Months ...

Datasheet: http://store.cmsdistribution.com/product-files/datasheet/249928.pdf\n\n Warranty: 24 Months ...