This Cisco GLC-LX-SM-RGD compatible SFP transceiver provides 1000 Base-LX throughput up to 10km over single-mode fibre (SMF) at a wavelength of 1310nm using a LC connector. It is also capable of withstanding rugged environments & can operate at temperatures between -40[D]C to +85[D]C. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized & data-traffic & application tested to ensure that it will initialize & perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. Feature Feature Value SFP transceiver type Fiber optic Maximum data transfer rate 1000 Mbit/s Interface typemini-GBICSingle-mode fiber (SMF) supported Y Fiber optic connector LC, SFPSFP transceiver standard LXMaximum transfer distance 10000 m Wavelength 1310 nm Product colour Silver Operating temperature (T-T)-40
- 85 &176;CWidth 12.7 mm Depth 55.9 mm Weight 70 g Number of products included 1 pc (s)
...

This SFP (mini-GBIC) transceiver module is designed for use with Cisco network equipment & is equivalent to Cisco part number GLC-SX-MM-RGD. The rugged design of this receiver allows it to withstand more extreme temperatures, -40&176;C to 85&176;C than a standard receiver, 0&176;C to 75&176;C. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a fiber optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance.\n\n- Functionally identical to Cisco GLC-SX-MM-RGD\n- LC ports designed for use with Multimode Fiber\n-

Includes:: Digital Optical Monitoring (DOM)\n- Rugged design withstands more extreme temperatures than a standard transceiver\n- 850nm wavelength signaling\n- Supports up to 550 meters of cabling Feature Feature Value SFP transceiver type Fiber optic Maximum data transfer rate 1000 Mbit/s Interface typemini-GBICMulti-mode fiber (MMF) supported Y Fiber optic connector LC, SFPSFP transceiver standard SXWavelength 850 nm Fiber ports quantity 2 Compatible products Cisco Width 7.62 mm Depth 55.9 mm Height 12.7 mm Weight 54 g

...

This SFP (mini-GBIC) transceiver module is designed for use with Cisco network equipment & is equivalent to Cisco part number GLC-SX-MM-RGD. The rugged design of this receiver allows it to withstand more extreme temperatures, -40&176;C to 85&176;C than a standard receiver, 0&176;C to 75&176;C. This transceiver is built to meet or exceed the specifications of the OEM & to comply with Multi-Source Agreement (MSA) standards. This product is 100% functionally tested, & compatibility is guaranteed. The transceiver is hot-swappable input/output device which allows a Gigabit Ethernet port to link with a fiber optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize & perform identically to an OEM transceiver. This transceiver may be mixed & deployed with other OEM or third party transceivers & will deliver seamless network performance.\n\n- Functionally identical to Cisco GLC-SX-MM-RGD\n- LC ports designed for use with Multimode Fiber\n-

Includes:: Digital Optical Monitoring (DOM)\n- Rugged design withstands more extreme temperatures than a standard transceiver\n- 850nm wavelength signaling\n- Supports up to 550 meters of cabling Feature Feature Value SFP transceiver type Fiber optic Maximum data transfer rate 1000 Mbit/s Interface typemini-GBICMulti-mode fiber (MMF) supported Y Fiber optic connector LC, SFPSFP transceiver standard SXWavelength 850 nm Fiber ports quantity 2 Compatible products Cisco Width 7.62 mm Depth 55.9 mm Height 12.7 mm Weight 54 g

...

Perfect for your home office or a large installation project, Enhanced Cat 5e 350 M Hz Snagless Patch Cables from Cables To Go distribute data, voice & video. These cables handle bandwidth intensive applications up to 350 M Hz & meet all Cat 5e TIA/EIA standards. The moulded, snag-free boot prevents unwanted cable snags during installation & provides extra strain-relief. Cables To Go 350 M Hz snagless patch cables are available in a variety of colours to easily colour-code your network installation. Feature Feature Value Cable length 5 m Cable standard Cat 5e Cable shielding U/UTP (UTP) Connector 1RJ-45 Connector 2RJ-45 Cable colour Orange Connector gender Male connector / Male connector Connector contacts plating Gold Jacket material Polyvinyl chloride (PVC) Cable type CAT5e AWG wire size 24 Frequency 350 MHz ...

Perfect for your home office or a large installation project, Enhanced Cat 5e 350 M Hz Snagless Patch Cables from Cables To Go distribute data, voice & video. These cables handle bandwidth intensive applications up to 350 M Hz & meet all Cat 5e TIA/EIA standards. The moulded, snag-free boot prevents unwanted cable snags during installation & provides extra strain-relief. Cables To Go 350 M Hz snagless patch cables are available in a variety of colours to easily colour-code your network installation. Feature Feature Value Cable length 5 m Cable standard Cat 5e Cable shielding U/UTP (UTP) Connector 1RJ-45 Connector 2RJ-45 Cable colour Orange Connector gender Male connector / Male connector Connector contacts plating Gold Jacket material Polyvinyl chloride (PVC) Cable type CAT5e AWG wire size 24 Frequency 350 MHz ...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements.\n\n Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use\n\n- Protect 10 Gigabit data transmissions from 10 G Base-T ports & equipment in high noise environments.\n- Snagless booted design protects clips when plugging & unplugging\n- Standard shielded RJ45 connectors & shielded twisted pair wires\n- Available in 4 colours to colour-code a networ\n- Available in lengths up to 30m\n\n\n\n\n\n Product Model: Cat 6a SSTP 1m\n\n\n ...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements.\n\n Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use\n\n- Protect 10 Gigabit data transmissions from 10 G Base-T ports & equipment in high noise environments.\n- Snagless booted design protects clips when plugging & unplugging\n- Standard shielded RJ45 connectors & shielded twisted pair wires\n- Available in 4 colours to colour-code a networ\n- Available in lengths up to 30m\n\n\n\n\n\n Product Model: Cat 6a SSTP 1m\n\n\n ...

C2G Cat 6a STP 3m. Cable length: 3 m, Cable standard: Cat 6a, Connector 1: RJ-45, Connector 2: RJ-45\n\n\n\n\n\n Product Model: Cat 6a STP 3m\n\n\n ...

C2G Cat 6a STP 3m. Cable length: 3 m, Cable standard: Cat 6a, Connector 1: RJ-45, Connector 2: RJ-45\n\n\n\n\n\n Product Model: Cat 6a STP 3m\n\n\n ...

54631 Feature Feature Value Cable length 3 m Connector 1RJ-45 Connector 2RJ-45 Cable colour Grey Connector gender Male connector / Male connector Jacket material Polyvinyl chloride (PVC) Cable type Cat 6a Cabling technology 10/100/1000 Base-T (X) Ro HS compliance Y ...