Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

This IDE (50-pin) to Compact Flash Enclosure Adapter offers a cost-effective do-it-yourself SSD solution; the adapter functions as a small form factor hard drive enclosure, allowing you to install a Compact Flash card into the enclosure for mounting in a computer in place of a 1.8in IDE hard drive. The adapter card lets you take advantage of the benefits that Solid State storage has to offer. With no moving parts, an SSD is the ideal addition to virtually any working environment, because it provides cooler & quieter storage than a conventional hard disk drive. Plus, Solid State drives are less susceptible to atmospheric hazards (e.g. dust particles, atmospheric changes etc.), ensuring seamless performance regardless of environmental factors. A highly reliable storage solution, the IDE to Compact Flash Enclosure Adapter is backed by Star Tech.com's free lifetime technical support. ...

he FIRE96MF IEEE-1394 Fire Wire 800 to 400 Adapter features a (male) Fire Wire 800 connector on one end & a (female) Fire Wire 400 connector on the other end, providing a cost-effective solution for connecting your older Fire Wire 400 devices to your Fire Wire 800-enabled devices or Mac family of products. Supporting data transfer rates of up to 400 Mbps, the FIRE96MF is great for applications requiring large file transfers, delivering a high speed link that minimizes data transfer time (e.g. transferring digital video files from a DV camcorder to a computer, etc). Designed & constructed for both durability & convenience, the Fire Wire 800 to Fire Wire 400 Adapter (9-pin to 6-pin) is backed by Star Tech.com's lifetime warranty. ...

Only the best-quality components are used when Star Tech.com′s expert manufacturing team creates our cable supplies & this adapter is no different. Our IEEE-1394 Firewire 4-6 Adapter M/F is used to change a 4 pin Fire Wire connector into a 6 pin Fire Wire connector. Backed with a lifetime warranty, these cables help Star Tech.com maintain our tradition of offering top-notch parts & products for the best price possible. ...

The IES51000POE 5-Port Gigabit Po E Switch with 4 PSE ports lets you connect Gigabit Ethernet & power to up to 4 Po E-enabled devices, or a mixture of Po E & non-Po E components. Giving you the freedom to place your equipment in locations where power outlets are not available, this compact Power over Ethernet switch complies with IEEE 802.3af standards & supplies up to 15.4 W per port, with a total power budget of 62W. A true unmanaged switching solution, the 4 PSE (Power Sourcing Equipment) ports sense whether the connected devices are Po E-ready or require data connectivity only, while all 5 ports auto-negotiate between 10/100/1000 Mbps network speed & duplex. The Gigabit Ethernet switch features a sturdy, wall-mountable metal enclosure for durability, & front panel LEDs for quick indication of connection speed & status. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage
- Power your devices without running electrical wiring with a full 15.4 W power per port
- Reduce expenses by using existing standard Cat 5/5e/6 Ethernet cabling to deliver power & data
- Provides durable performance in harsh environments with a sturdy steel construction


...

The IES8100POEGB 8-port 10/100 Mbps Power over Ethernet (Po E) Switch enables you to supply both power & data to up to 8 Po E-capable devices. The switch complies with 802.3af standards & supplies up to 15.4 W per port
- plenty of power for your Po E devices. A flexible solution giving you the freedom to place your equipment in locations where power outlets are not available, this compact Po E Switch features 8 auto-detecting full/half-duplex ports with automatic crossover detection (MDI/MDI-X). A sturdy metal enclosure provides durability in harsh industrial environments.
...

Rugged Ethernet Switch &pipe; 5 Po E RJ45 &pipe; 2 SFP Slots &pipe; 30W Po E+ &pipe; 48V DC &pipe; DIN Rail Mountable\n\n Easily deploy or scale your network with this Gigabit Ethernet switch, features four dedicated Po E+ enabled ports, & one dedicated open SFP slot plus the flexibility of a switchable RJ-45/ Open SFP port for use as an uplink or for non-Po E devices. It features an IP-30 housing, compact design, & is wall & DIN rail mountable.\n\n Power Over Ethernet & 48V Voltage\n\n With a total power budget of 120W, this PSE Ethernet switch provides up to 30W of power per Po E port to IEEE 802.3af (Po E / Type 1) & IEEE 802.3at (Po E+ / Type 2) powered devices (PD) like:\n\n Cameras\n\n Sensors\n\n Wi-Fi access points\n\n Uses Cat 5e (or higher rated) Ethernet cabling.\n\n Designed for Harsh Environments\n\n Industrial features include -40 C to 75 C operating temperature, IP-30 rated housing, vibration, shock, & free-fall standard testing.\n\n Vibration: EN 60068-2-6\n\n Shock: EN 60068-2-27\n\n Free-Fall: EN 60068-2-32\n\n 500, 000+ hours MTBF rating using Telcordia/ Bellcore at 50 C for long-term reliability.\n\n Dual Power Inputs\n\n Dual power inputs provide redundancy. Accepts terminal block power or DIN power connectors for additional power supply flexibility, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation.\n\n The IES1G52UPDIN is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- FIBER & Po E: Industrial 6 Port Gigabit Ethernet Switch IEEE 802.3af (Po E) or 802.3at (Po E+) 30W max per 4 x Po E ports PSE + 2 x open SFP slots \n- Use with devices like cameras, sensors, wi-fi APs\n- FLEXIBLE POWER INPUT: Use a DIN power connector or hardwire using terminal block power, or use dual power sources for redundancy\n\n\n\n\n\n\n\n Model: Industrial 5 Port Gigabit Ethernet Switch 5 Po E RJ45 +2 SFP Slots 30W Po E+ 48VDC 10/100/1000 Power Over Ethernet LAN Switch -40C to 75C with DIN Connector/ Mountable\n\n PDF: https://d 5bm 31en 4blvo.cloudfront.net/uploads/pdf/mmo_86648720_1603105123_1449_5447.pdf\n\n Manual: https://d 5bm 31en 4blvo.cloudfront.net/uploads/pdf/mmo_86648720_1603105117_2654_27518.pdf\n\n\n\n ...

Rugged Ethernet Switch &pipe; 5 Po E RJ45 &pipe; 2 SFP Slots &pipe; 30W Po E+ &pipe; 48V DC &pipe; DIN Rail Mountable\n\n Easily deploy or scale your network with this Gigabit Ethernet switch, features four dedicated Po E+ enabled ports, & one dedicated open SFP slot plus the flexibility of a switchable RJ-45/ Open SFP port for use as an uplink or for non-Po E devices. It features an IP-30 housing, compact design, & is wall & DIN rail mountable.\n\n Power Over Ethernet & 48V Voltage\n\n With a total power budget of 120W, this PSE Ethernet switch provides up to 30W of power per Po E port to IEEE 802.3af (Po E / Type 1) & IEEE 802.3at (Po E+ / Type 2) powered devices (PD) like:\n\n Cameras\n\n Sensors\n\n Wi-Fi access points\n\n Uses Cat 5e (or higher rated) Ethernet cabling.\n\n Designed for Harsh Environments\n\n Industrial features include -40 C to 75 C operating temperature, IP-30 rated housing, vibration, shock, & free-fall standard testing.\n\n Vibration: EN 60068-2-6\n\n Shock: EN 60068-2-27\n\n Free-Fall: EN 60068-2-32\n\n 500, 000+ hours MTBF rating using Telcordia/ Bellcore at 50 C for long-term reliability.\n\n Dual Power Inputs\n\n Dual power inputs provide redundancy. Accepts terminal block power or DIN power connectors for additional power supply flexibility, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation.\n\n The IES1G52UPDIN is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- FIBER & Po E: Industrial 6 Port Gigabit Ethernet Switch IEEE 802.3af (Po E) or 802.3at (Po E+) 30W max per 4 x Po E ports PSE + 2 x open SFP slots \n- Use with devices like cameras, sensors, wi-fi APs\n- FLEXIBLE POWER INPUT: Use a DIN power connector or hardwire using terminal block power, or use dual power sources for redundancy\n\n\n\n\n\n\n\n Model: Industrial 5 Port Gigabit Ethernet Switch 5 Po E RJ45 +2 SFP Slots 30W Po E+ 48VDC 10/100/1000 Power Over Ethernet LAN Switch -40C to 75C with DIN Connector/ Mountable\n\n PDF: https://d 5bm 31en 4blvo.cloudfront.net/uploads/pdf/mmo_86648720_1603105123_1449_5447.pdf\n\n Manual: https://d 5bm 31en 4blvo.cloudfront.net/uploads/pdf/mmo_86648720_1603105117_2654_27518.pdf\n\n\n\n ...