Take the blazing speed of Serial ATA outside your case with an external slot plate from Star Tech.com. The ESATAPLATE1 adds external data support to any existing Serial ATA controller. This product is designed to take advantage of the increased data integrity provided by external hard drives or RAID devices that support ESATA connections. You′ll get up to 300 MBytes/sec of reliable data transfer for your Serial ATA peripherals, like external storage devices. Installation is easy: just install the plate into an open I/O slot on your computer & connect the cables to the Serial ATA connectors on your motherboard or controller card. The slim SATA data cable provides less clutter for increased airflow inside your case. Like all our cable products, the ESATAPLATE1 is backed by our lifetime warranty. ...

This dual drive SATA HDD Dock provides fast, convenient access to 2.5" (up to 500 Gb) or 3.5" SATA or SATA II (SATA /300) hard drives (up to 2TB each) through either USB (Universal Serial Bus) or e SATA, without ever having to open a computer case or mount hard drives in an enclosure. Supporting one or two drives, SATDOCK2UEGB can be connected to the host computer through either USB (Universal Serial Bus) 2.0 or e SATA
- then, it's just a matter of inserting the desired 2.5" or 3.5" SATA/SATA II hard drives (or combination of both) into one of the two (or both) docking station slots for instant access. The docking station supports plug & play installation on most operating systems, making it a perfect solution for data recovery, drive imaging, software testing, or any environment that requires fast access to massive amounts of data (uninstalled or archived hard drives etc.). Plus, SATDOCK2UEGB features a small form factor design that requires minimal desk space for permanent connection to the host computer & provides enough hard drive surface exposure to optimize dissipation of operating heat. SATDOCK2UEGB supports any 2.5" or 3.5" SATA (SATA 150, SATA 300/SATA II) hard drive, up to 2TB, & data transfer speeds of up to 3 Gbps (using e SATA) & 480 Mbps (using USB (Universal Serial Bus) 2.0) between host & dock
- ensuring effortless data dumps or backups & hassle-free file transfers.

...

Exactly duplicate one 2.5in or 3.5in SATA hard drive to another, effortlessly & without a computer The SATDOCK22RE USB (Universal Serial Bus) & e SATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock. As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of 72MB/second
- ensuring data integrity & consistency for sensitive operations, such as data recovery. As an external hard drive dock, the duplicator/dock supports plug-&-play installation & can be connected to your host computer through USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds up to 480 Mbps or 3 Gbps respectively from the hard drives to your computer system. Not having to install the hard drives into an enclosure or tray system allows for quick setups
- a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient & versatile storage solution. The value of this hard drive docking station can be extended, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot. * Standalone cloning operation with LED progress indicator allows for creating 1:1 copies of hard drives without having to connect to a host computer. * On-the-fly switching from Duplicator to USB (Universal Serial Bus) 2.0 or e SATA connectivity with the push of a button, allows a connected computer system to read/write to the drives. * A top slot-loading design & unique drive ejection mechanism provides quick & easy access to the data without having to install drives into an enclosure or tray.

...

Connect your external SATA storage devices to your Laptop or desktop.\n\n This shielded e SATA cable offers a high quality 6ft connection between a desktop or laptop computer & external SATA storage devices, allowing you to "externalize" the impressive capabilities offered by Serial ATA.\n\n The Star Tech.com Advantage\n\n- Up to six times faster than contemporary external storage solutions: USB (Universal Serial Bus) 2.0 & Firewire (IEEE 1394)\n- Robust & user friendly external connection\n- High performance, cost effective expansion Feature Feature Value Cable length 1.8 m Cable type SATA IIIConnector 1e SATAConnector 2e SATAConnector gender Male connector / Male connector Product colour Black Connector 1 form factor Straight Connector 2 form factor Straight Maximum data transfer rate 6 Gbit/s Ro HS compliance Y Package width 15 mm Package height 220 mm Package length 12.4 cm Package weight 100 g ...

Connect your external SATA storage devices to your Laptop or desktop.\n\n This shielded e SATA cable offers a high quality 6ft connection between a desktop or laptop computer & external SATA storage devices, allowing you to "externalize" the impressive capabilities offered by Serial ATA.\n\n The Star Tech.com Advantage\n\n- Up to six times faster than contemporary external storage solutions: USB (Universal Serial Bus) 2.0 & Firewire (IEEE 1394)\n- Robust & user friendly external connection\n- High performance, cost effective expansion Feature Feature Value Cable length 1.8 m Cable type SATA IIIConnector 1e SATAConnector 2e SATAConnector gender Male connector / Male connector Product colour Black Connector 1 form factor Straight Connector 2 form factor Straight Maximum data transfer rate 6 Gbit/s Ro HS compliance Y Package width 15 mm Package height 220 mm Package length 12.4 cm Package weight 100 g ...

The ESATAPNLFM1 1-foot e SATA Panel Mount Cable provides a well-secured, easy-to-access e SATA connection on any device port or faceplate. Constructed of only high quality materials & expertly designed for reliability & peak performance, the ESATAPNLFM1 cable is backed by Star Tech.com's Lifetime Warranty.
- A panel mount e SATA port with screws to allow for secure installation
- Support fast data transfer rates of up to 6 Gbps
- Compliant with Serial ATA III Specifications


...

The ET1000S40LC2 1000 Mbps Gigabit Single-Mode Fiber Media Converter (LC, 40 km) enables you to extend a Gigabit Ethernet network over single-mode fiber, at distances up to 40km (25 miles). A cost-effective solution for connecting a Gigabit Ethernet (1000 Base-T) network to remote network segments over a (1000 Base-LX/SX) fiber backbone, the Gb E to SM fiber converter supports full Gigabit speeds for ideal network performance & scalability. Designed to offer a durable & convenient Ethernet to fiber solution, the Ethernet to LC Fiber converter features an all-steel chassis, & a simple plug-&-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). ...

The ET1110PSE PSE/ Po E Media Converter, which features an open SFP slot, enables you to create an Ethernet-Fiber link by transparently converting from 1000 Base-SX/LX fiber to 10/100/1000 Base-T, while acting as a Power Sourcing Equipment (PSE) device. With the added flexibility of an open SFP slot, the media converter enables you to choose the Gigabit SFP that best suits your network fiber connection & distance requirements (see our full line of Gigabit transceivers for compatible solutions). Capable of delivering up to 48V DC power to IEEE 802.3af devices (such as wireless access points (WAP) or IP cameras), using standard Cat 5 (or better) cabling, this Po E media converter offers the ideal solution for providing data & power to areas where electrical wall outlets may not be available
- a versatile solution that saves the hassle & expense of running new electrical wiring. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage
- The PSE media converter enables you to use existing standard Cat 5/5e/6 Ethernet cabling to deliver both power & data, which allows for remote equipment installs in locations where it was previously impossible
- The compact, lightweight design of the Po E media converter can easily be mounted or placed into any location, with little or no configuration needed, which saves install space, as well as time & hassle
- An open SFP slot provides the flexibility to configure this POE media converter to best suit your network requirements



...

The ET90110SC2 10/100 Mbps Multimode Fiber Media Converter SC (2 km) lets you extend a Fast Ethernet network (10/100 Mbps) over multimode fiber, at distances up to 2 km (1.2 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100 Base-T) network to remote network segments over a 100 Base-FX fiber backbone, the media converter is designed to offer a durable & convenient Ethernet-to-fiber solution, featuring an all-steel chassis, & a simple plug-&-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). ...

The ET90110ST2 10/100 Mbps Multimode Fiber Media Converter (ST, 2 km) lets you extend a Fast Ethernet network (10/100 Mbps) over multimode fiber, at distances of up to 2 km (1.2 miles). A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100 Base-T) network to remote network segments over a 100 Base-FX fiber backbone. Designed to offer a durable & convenient Ethernet to fiber solution, the Ethernet to ST Fiber converter features an all-steel chassis, & a simple plug-&-play installation with minimal configuration required. For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). ...