The industry-standard Cisco Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. Cisco GBICs can be interchanged on a wide variety of Cisco products & can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-CWDM, or 1000BASE-DWDM interfaces on a port-by-port basis. Cisco 1000BASE-SX GBIC. The Cisco 1000BASE-SX GBIC (WS-G5484) operates on legacy multimode fiber (MMF) optic link spans up to 1815 feet (550 m) & on laser-optimized multimode fiber (OM3) optic link spans up to 3281 feet (1 km). ...

- 12 port line-rate SFP line card providing 24 gigabits per-slot capacity (1:1 oversubscribed)
- Cisco IOS Software Release 12.2
...

The Cisco Catalyst 4500 E-Series 48-port Gigabit Ethernet line cards provide high-performance 10/100/1000 switching at 24 Gbps per slot. (2:1 oversubscribed). The Cisco Catalyst 4500 48-port 10/100/1000 E-Series line cards are designed for LAN access applications where desktop users require gigabit connection speeds. The Cisco Catalyst 4500 48-port 10/100/1000 E-Series line cards are available in two versions: one with standard Po E 802.3af, & the second one with standard Po E 802.3af & Po EP ready features such as support for up to 30 Watts per port. ...

- 48 ports nonblocking
- 10/100/1000 module (RJ-45)
- Cisco IOS XE Release 3.1.0SG or later
- IEEE 802.3af/at & Cisco


...

\n\n\n \n Cisco WSP-Q40GLR4L= network transceiver module Fiber optic 40000 Mbit/s QSFP+ 1310 nm\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Transceiver Modules\n \n \n SKU:\n WSP-Q40GLR4L=\n \n \n EAN:\n 0882658705182\n \n \n \n \n \n Description\n \n \n Cisco offers a comprehensive range of pluggable optical modules for the Cisco ONS family of multiservice platforms. The wide variety of modules gives you flexible & cost-effective options for all types of client interfaces. Cisco offers a range of GBICs for Gigabit Ethernet use, a wide variety of SFP modules, XFP modules & has recently introduced SFP+, CXP & CFP pluggable modules. These small, modular optical interface transceivers offer a convenient & cost-effective solution for an array of applications in the data center, campus, metropolitan-area access & ring network, storage area network, & long-haul network.\n \n \n \n Specifications\n \n Networking SFP transceiver type Fiber optic Fiber optic connector LCCabling technology 40GBASE-LR4 Maximum data transfer rate 40000 Mbit/s Interface type QSFP+ Technical details Hot-Plug support Yes Auto MDI/MDI-XYes Maximum transfer distance 2000 m Wavelength 1310 nm Fiber cable diameters supported (core/cladding)9/125 &181;m Duplex system Full Cabling technology 40GBASE-LR4 Performance Hot-Plug support Yes SFP transceiver type Fiber optic Fiber optic connector LCAuto MDI/MDI-XYes Maximum transfer distance 2000 m Wavelength 1310 nm Fiber cable diameters supported (core/cladding)9/125 &181;m Duplex system Full Cabling technology 40GBASE-LR4 Maximum data transfer rate 40000 Mbit/s Interface type QSFP+ Single-mode fiber (SMF) supported Yes SFP transceiver standard LRFeatures Hot-Plug support Yes Certification MSAOperational conditions Operating temperature (T-T)-40
- 85 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Packaging data Number of products included 1 pc (s) Certificates Certification MSAPackaging content Number of products included 1 pc (s)\n \n \n\n \n\n\n\n\n\n



...

The Cisco Catalyst 6500 modules support industry XENPAK modular optics, providing both flexibility in station-to-station distances & investment protection for redeployment options. Each XENPAK supports a single 10 Gigabit Ethernet interface & can be mixed with other XENPAK optics on the same interface module for custom configurations. ...

\n Cisco XFP-10G-MM-SR network media converter 10000 Mbit/s 850 nm\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Media Converters\n \n \n SKU:\n XFP-10G-MM-SR=\n \n \n EAN:\n 0882658167065 4053162328495 4054318557356 8826581670652 0849064011153\n \n \n \n \n \n Description\n \n \n Cisco XFP-10G-MM-SR. Maximum data transfer rate: 10000 Mbit/s, Cabling technology: 10 G Base-SR. Connectivity technology: Wired. Maximum transfer distance: 300 m, Wavelength: 850 nm. Compliance industry standards: IEEE 802.3. Transmit power range: -1.0, Interface: LC (1.25mm), Form factor: SFF\n \n \n \n Specifications\n \n Technical details Wavelength 850 nm Maximum transfer distance 300 m Hot-swap Yes Performance Hot-swap Yes Wavelength 850 nm Maximum transfer distance 300 m Networking Cabling technology 10 G Base-SRMaximum data transfer rate 10000 Mbit/s Ports & interfaces Connectivity technology Wired Design Compliance industry standards IEEE 802.3 Management features Hot-swap Yes Other features Transmit power range-1.0 Cabling technology 10 G Base-SRInterface LC (1.25mm) Form factor SFFCompliance industry standards IEEE 802.3 Fiber type MM\n \n \n\n\n\n\n\n ...

\n Cisco Yellow Cable for Ethernet, Straight-through, RJ-45, 1.8m networking cable\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Computer Cables\n \n \n Sub-Category:\n Networking Cables\n \n \n SKU:\n CAB-ETH-S-RJ45=\n \n \n EAN:\n 0746320094175 4054318026685 0004632009417 4053162282797 7463200941758 5052916472407 0799599484468\n \n \n \n \n \n Description\n \n \n Cisco introduces a straight-through yellow cable for Ethernet. It will never let you down providing the most reliable connection all over your network.\n \n \n \n Specifications\n \n Technical details Connector 1RJ-45 Connector 2RJ-45 Cable length 1.8 m Cable colour Yellow Features Cable colour Yellow Connector 1RJ-45 Connector 2RJ-45 Cable length 1.8 m Other features Cable colour Yellow\n \n \n\n\n\n\n\n ...

The Ci T elite is a budget focused Micro-ATX chassis aimed at business & home office solutions. The Elite is one of the best air cooling solutions with a full mesh front panel for a professional look & is equipped with a USB3 port on the front of the I/O panel. The Elite also

Includes:: a rear 80mm fan.\n\n The Elite is an ideal choice for anyone looking to build an office or home based PC on a budget.\n\n- Full mesh front panel with 1 x USB (Universal Serial Bus) 3.0\n- Black chassis with 80mm rear cooling fan included\n- Micro ATX chassis with a simple design\n- Intel Approved TAC2.0 thermal chassis\n- Black coated interior\n\n PSU Specifications\n Max PSU Rail Output\n+3.3V: 15A\n+5V: 15A\n+12V: 30A\n-12V: 0.5A\n+5VSB: 2.5A\n\n PSU Connectors\n 20 + 4pin ATX Mainboard: 1\n 4pin +12V CPU: 1\n SATA: 3\n 4pin Molex: 2\n FDD: 1\n\n Case Specifications\n Form Factor\n Micro Tower\n\n Motherboard Support\n Micro ATX\n Mini-ITX\n\n PSU Support\n Standard ATX\n\n PSU Location\n Top\n\n Body Material\n 0.5mm SPCC\n\n Front Bezel Material\n Mesh\n\n Side Panel\n Vented\n\n Internal Cable Management Depth\n 21mm\n\n Drive Bays\n 2 x 5.25" External\n 2 x 3.5" External\n 3 x 3.5" Internal\n 2 x 2.5" Internal\n\n Drive Bay Notes\n External Bays include 2 x 5.25" Bays & 2 x 3.5" Bays\n\n Expansion Slots\n 4 x Full Size\n\n Cooling\n Front: None\n Top: None\n Rear: 1 x 80mm Fan (1 x 80mm Fan Inc.)\n Side: None\n Bottom: None\n\n IO Ports\n 1 x USB (Universal Serial Bus) 3.0\n 1 x USB (Universal Serial Bus) 2.0\n 1 x HD Audio\n\n GPU Max Length\n 330mm\n\n CPU Cooler Maximum Height\n 160mm\n\n Front Bezel Colour\n Black\n\n Body Colour\n Black\n\n PSU Included\n Yes\n\n Dimensions (W x H x D )\n 173 x 370 x 417 mm\n\n Weight\n 4.1kg\n\n\n\n\n\n\n\n\n\n

...

The Ci T elite is a budget focused Micro-ATX chassis aimed at business & home office solutions. The Elite is one of the best air cooling solutions with a full mesh front panel for a professional look & is equipped with a USB3 port on the front of the I/O panel. The Elite also

Includes:: a rear 80mm fan.\n\n The Elite is an ideal choice for anyone looking to build an office or home based PC on a budget.\n\n- Full mesh front panel with 1 x USB (Universal Serial Bus) 3.0\n- Black chassis with 80mm rear cooling fan included\n- Micro ATX chassis with a simple design\n- Intel Approved TAC2.0 thermal chassis\n- Black coated interior\n\n PSU Specifications\n Max PSU Rail Output\n+3.3V: 15A\n+5V: 15A\n+12V: 30A\n-12V: 0.5A\n+5VSB: 2.5A\n\n PSU Connectors\n 20 + 4pin ATX Mainboard: 1\n 4pin +12V CPU: 1\n SATA: 3\n 4pin Molex: 2\n FDD: 1\n\n Case Specifications\n Form Factor\n Micro Tower\n\n Motherboard Support\n Micro ATX\n Mini-ITX\n\n PSU Support\n Standard ATX\n\n PSU Location\n Top\n\n Body Material\n 0.5mm SPCC\n\n Front Bezel Material\n Mesh\n\n Side Panel\n Vented\n\n Internal Cable Management Depth\n 21mm\n\n Drive Bays\n 2 x 5.25" External\n 2 x 3.5" External\n 3 x 3.5" Internal\n 2 x 2.5" Internal\n\n Drive Bay Notes\n External Bays include 2 x 5.25" Bays & 2 x 3.5" Bays\n\n Expansion Slots\n 4 x Full Size\n\n Cooling\n Front: None\n Top: None\n Rear: 1 x 80mm Fan (1 x 80mm Fan Inc.)\n Side: None\n Bottom: None\n\n IO Ports\n 1 x USB (Universal Serial Bus) 3.0\n 1 x USB (Universal Serial Bus) 2.0\n 1 x HD Audio\n\n GPU Max Length\n 330mm\n\n CPU Cooler Maximum Height\n 160mm\n\n Front Bezel Colour\n Black\n\n Body Colour\n Black\n\n PSU Included\n Yes\n\n Dimensions (W x H x D )\n 173 x 370 x 417 mm\n\n Weight\n 4.1kg\n\n\n\n\n\n\n\n\n\n

...