Cisco Aironet 1260 Series wireless access points provide reliable & predictable 802.11n wireless coverage for indoor environments. These enterprise-class access points deliver up to nine times the throughput of 802.11a/g networks for rich-media applications. Designed specifically for challenging environments, the 1260 Series supports external antennas & a broad operating-temperature range. ...

\n Cisco AIR-PWRINJ5= Po E adapter Gigabit Ethernet\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Po E Adapters\n \n \n SKU:\n AIR-PWRINJ5=\n \n \n EAN:\n 0882658569142 8826585691424 4053162313521 5054629454381 0163120900794 5054533625266 5054484625261 0014445008378\n \n \n \n \n\n Description\n \n \n The Cisco Aironet Power Injector (AIR-PWRINJ5) increases wireless LAN deployment flexibility of Cisco Aironet Access Points by providing an alternative powering option to local power, inline power-capable multiport switches, & multiport power patch panels.\n\n\n\n The single-port Cisco Aironet Power Injector provides 802.3af power & data signal, sending both to the Cisco Aironet Access Point.\n\n\n\n The power injectors provide up to 15.4 W over the unused wire pairs of a Category 5 or better Ethernet cable, supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 1040, 1140, 1260, 2600, & 3500 Series Access Points. While it can also support the Cisco Aironet Series 3600 Access Points when modules are not being used, it is recommended to use the AIR-PWRINJ4= power injector instead for the 3600 series, as it has sufficient power to supply to the AP & any installed modules.\n\n\n\n Cisco Aironet Power Injector\n\n\n\n The Cisco Aironet Power Injector provides both power & data to a connected Cisco Aironet Access Point. The device serves the following functions:\n\n\n\n- It provides Category 5 or better Ethernet media to the access point.\n\n- It uses wires in an Ethernet cable to supply inline 15.4 W power to an access point. The power injector provides an easy & economical way to provide data & power to an access point located in areas where power is not available.\n\n\n\n The power injector is used with the following Cisco Aironet Series Access Points:\n\n- 1040 series access points\n\n- 1140 series access points\n\n- 1260 series access points\n\n- 1600 series access points\n\n- 2600 series access points\n\n- 3500 series access points\n \n \n\n Specifications\n \n Networking Power over Ethernet (Po E) Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet interface type Gigabit Ethernet Cabling technology 10/100/1000 Base-T (X) Features LED indicators Yes Ports & interfaces Ethernet LAN (RJ-45) ports 2 Technical details Number of products included 1 pc (s) Power over Ethernet (Po E) Yes Ethernet LAN data rates 10, 100, 1000 Mbit/s Ethernet interface type Gigabit Ethernet Operational conditions Operating temperature (T-T)0
- 45 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Dimensions (Wx Dx H)65 x 165 x 36 mm Packaging content Number of products included 1 pc (s) Indication LED indicators Yes\n \n \n\n\n\n\n\n

...

The new Cisco Aironet 2600 Series Access Point delivers the most advanced features in its class
- with great performance, functionality,
...

The Power Injector LR2 converts the standard 10/100 Base T Ethernet category 5 RJ-45 interface that is suitable for weather-protected areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments. While providing a 100base T interface to the Cisco Aironet 1300 Series, the Power Injector LR2 also provides power to the unit over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be connected. As an added benefit to the installer, Auto MDIX is built in, allowing the dual cables to be swapped & while maintaining the same functionality. To support longer cable runs from your infrastructure network switch or router, the Power Injector LR is designed to accommodate up to a 100-meter coaxial cable run plus 100 meters of indoor cat 5 cable
- enabling total cable runs up to 200 meters. Lightning & surge protection is also included at the F-Type connector interface to provide added protection to your network infrastructure devices. The LR2 Power injector requires a Cisco supplied 48V DC source.
...

\n Cisco Aironet 1540 1000 Mbit/s Grey Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Access Points\n \n \n SKU:\n AIR-AP1542D-E-K9\n \n \n EAN:\n 0882658970368\n \n \n \n \n \n Description\n \n \n Cisco&174; Aironet&174; 1540 Series outdoor access points offer the latest 802.11ac Wave 2 functions in a rugged, ultra-low-profile housing that service providers & enterprises can deploy easily.\n\n The Cisco Aironet 1540 Series is ideal for applications requiring rugged outdoor Wi-Fi coverage & supports the latest 802.11ac Wave 2 radio standard. Housed in a compact, aesthetically pleasing, easy-to-deploy package, the 1540 Series offers flexible deployment options for service providers & enterprise networks that need the fastest links possible for mobile outdoor clients (smartphones, tablets, & laptops) & wireless backhaul. The 1540 Series access points give network operators the flexibility to balance their desired wireless coverage with their need for easy deployment.\n\n Whether deployed as a traditional access point or a wireless mesh access point, the 1540 Series provides the throughput capacity needed for today&153;s bandwidth-hungry devices.\n \n \n \n Specifications\n \n Data transmission Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 1000 Mbit/s Performance 2.4 GHz Yes 5 GHz Yes Transmitting power 25 d Bm W Reset button Yes Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Ethernet LAN data rates 10, 100, 1000 Mbit/s Channels quantity 21 channels Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n EN61000-4-5\n EN61000-4-4\n EN61000-4-3\n EN61000-4-2\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66 (Japan) \n ARIB-STD T71 (Japan) \n EN 300 328\n EN 301 893\n ICES-003 \n EN 301 489-1, -17 Maximum data transfer rate 1000 Mbit/s Wireless LAN features Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Channels quantity 21 channels Network Internal No Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Certificates Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n EN61000-4-5\n EN61000-4-4\n EN61000-4-3\n EN61000-4-2\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66 (Japan) \n ARIB-STD T71 (Japan) \n EN 300 328\n EN 301 893\n ICES-003 \n EN 301 489-1, -17 Features 2.4 GHz Yes 5 GHz Yes Transmitting power 25 d Bm W Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Ethernet LAN data rates 10, 100, 1000 Mbit/s Channels quantity 21 channels Maximum data transfer rate 1000 Mbit/s Maximum data transfer rate (5 GHz)867 Mbit/s Security Security algorithms 802.1x RADIUS, EAP, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, LEAP, WPA, WPA2VPN support I Psec, L2TPMAC address filtering Yes Ports & interfaces WAN connection Ethernet (RJ-45) Ethernet LAN (RJ-45) ports 1 Power Power consumption (max)13 WPower over Ethernet (Po E) Yes Design International Protection (IP) code IP67 Placement Pole, Wall Product colour Grey Reset button Yes Internal No LED indicators Yes Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n EN61000-4-5\n EN61000-4-4\n EN61000-4-3\n EN61000-4-2\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66 (Japan) \n ARIB-STD T71 (Japan) \n EN 300 328\n EN 301 893\n ICES-003 \n EN 301 489-1, -17 Antenna Antenna type Internal Antennas quantity 2 Antenna gain level (max)9 d Bi Antenna features Integrated antenna Technical details Transmitting power 25 d Bm W Reset button Yes Operational conditions Operating temperature (T-T)-40
- 65 &176;CStorage temperature (T-T)-40
- 85 &176;CIndication LED indicators Yes Weight & dimensions Width 200 mm Depth 150 mm Weight 1.25kg Height 61 mm\n \n










...

\n\n\n \n Cisco Aironet 1562E WLAN access point 1300 Mbit/s Power over Ethernet (Po E) Grey\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Access Points\n \n \n SKU:\n AIR-AP1562E-E-K9\n \n \n EAN:\n 0882658904158\n \n \n \n \n \n Description\n \n \n Support 802.11ac Wave 2 in outdoor networks\n\n\n\n Get the technological flexibility you need to strengthen your outdoor wireless network. Aironet 1560 access points comply with 802.11ac Wave 2 standards. These outdoor access points extend the quality & robustness of the Wi-Fi that&153;s inside your office, outside.\n \n \n \n Specifications\n \n Data transmission Wi-Fi data rate (max)1300 Mbit/s Ethernet LAN data rates 10, 100, 1000 Mbit/s Maximum data transfer rate 1300 Mbit/s Performance 2.4 GHz Yes 5 GHz Yes Wi-Fi data rate (max)1300 Mbit/s Transmitting power 27 d Bm W Reset button Yes Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u Ethernet LAN data rates 10, 100, 1000 Mbit/s Channels quantity 21 channels Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66\n ARIB-STD T71\n EN 300 328\n EN 301 893 \n ICES-003\n EN 301 489-1, -17 Maximum data transfer rate 1300 Mbit/s Remote Authentication Dial-In User Service (RADIUS) Yes Wireless LAN features Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Channels quantity 21 channels Networking Internal No Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u Certificates Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66\n ARIB-STD T71\n EN 300 328\n EN 301 893 \n ICES-003\n EN 301 489-1, -17 Features 2.4 GHz Yes 5 GHz Yes Wi-Fi data rate (max)1300 Mbit/s Transmitting power 27 d Bm W Frequency band 2.412
- 2.472, 5.5
- 5.58, 5.66
- 5.7 GHz Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u Ethernet LAN data rates 10, 100, 1000 Mbit/s Channels quantity 21 channels Maximum data transfer rate 1300 Mbit/s Security Security algorithms 802.1x RADIUS, AES, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, LEAP, PEAP, WPA, WPA2VPN support I Psec, L2TPMAC address filtering Yes Remote Authentication Dial-In User Service (RADIUS) Yes Ports & interfaces WAN connection Ethernet (RJ-45) Ethernet LAN (RJ-45) ports 1 Power Power consumption (typical)25 WPower over Ethernet (Po E) Yes Input voltage 44
- 57 VDesign International Protection (IP) code IP67 Placement Wall Product colour Grey Reset button Yes Internal No Certification UL60950\n CAN/CSA-C22.2 No. 60950\n IEC 60950\n EN 60950\n FCC\n RSS-210\n RSS-102\n AS/NZS 4268.2003\n ARIB-STD 66\n ARIB-STD T71\n EN 300 328\n EN 301 893 \n ICES-003\n EN 301 489-1, -17 Antenna Antenna type External Technical details Transmitting power 27 d Bm W Reset button Yes Operational conditions Operating temperature (T-T)-40
- 65 &176;CStorage temperature (T-T)-40
- 85 &176;CWeight & dimensions Width 171 mm Depth 229 mm Weight 2.5kg Height 98 mm\n \n \n\n \n\n\n\n\n\n











...

Cisco Aironet 1600 Series Access Points
- Cisco Aironet 1600 Series Access Point provides a low total cost of ownership by integrating
...

The new Cisco Aironet 1600 Series Access Point is an enterprise-class, entry-level, 802.11n-based access point designed to address the wireless connectivity needs of small & medium-sized enterprise networks. The Aironet 1600 Series delivers great performance at an attractive price for customers while providing advanced functionality such as Clean Air Express 1 for better cover through spectrum intelligence & Clientlink 2.0 for entry level networks that have a mixed client base. In addition to these features, the Aironet 1600 series

Includes:: 802.11n-based 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, making it ideal for small & medium-sized enterprises. The Aironet 1600 Series also provides at least six times the throughput of existing 802.11a/g networks. As part of the Cisco Aironet Wireless portfolio, the Cisco Aironet 1600 Series access point provides low total cost of ownership & investment protection by integrating seamlessly with the existing network. With an entry-level path to 802.11n migration, the Aironet 1600 Series can add capacity to the network for future growth for expanding applications & bandwidth. Designed with rapidly evolving mobility needs in mind, the Cisco Aironet 1600 Series Access Point addresses the bring-your-own-device (BYOD) trend by providing advanced functionality at the right price point. RF Excellence. Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 1600 Series delivers secure & reliable wireless connections. Enterprise-class chipsets & optimized radios deliver a robust mobility experience with:
- 802.11n with 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, which sustains 300-Mbps rates over a greater range for more capacity & reliability than competing access points.
- Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce dead spots & help ensure high-availability client connections.
- Clean Air Express: Effectively detects RF interference & provides basic spectrum analysis capability while simplifying ongoing operations.
- Cisco Client Link 2.0 technology: Improves downlink performance to all mobile devices including 802.11n while improving battery life on mobile devices such as smartphones & tablets.
- Cisco Band Select technology: Improves 5-GHz client connections in mixed-client environments.
- Cisco Video Stream technology: Uses multicast to improve rich-media applications.
- Building on the Cisco All of these features help ensure the best possible end-user experience on the wireless network. Cisco also offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios. Scalability. The Cisco Aironet 1600 Series is a component of the Cisco Unified Wireless Network, which can scale to up to 18, 000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, & at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, & scalable architecture delivering secure access to mobility services & applications, & offering the lowest total cost of ownership & investment protection by integrating seamlessly with the existing wired network.








...

The new Cisco Aironet 1600 Series Access Point is an enterprise-class, entry-level, 802.11n-based access point designed to address the wireless connectivity needs of small & medium-sized enterprise networks. The Aironet 1600 Series delivers great performance at an attractive price for customers while providing advanced functionality such as Clean Air Express 1 for better cover through spectrum intelligence & Clientlink 2.0 for entry level networks that have a mixed client base. In addition to these features, the Aironet 1600 series

Includes:: 802.11n-based 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, making it ideal for small & medium-sized enterprises. The Aironet 1600 Series also provides at least six times the throughput of existing 802.11a/g networks. As part of the Cisco Aironet Wireless portfolio, the Cisco Aironet 1600 Series access point provides low total cost of ownership & investment protection by integrating seamlessly with the existing network. With an entry-level path to 802.11n migration, the Aironet 1600 Series can add capacity to the network for future growth for expanding applications & bandwidth. Designed with rapidly evolving mobility needs in mind, the Cisco Aironet 1600 Series Access Point addresses the bring-your-own-device (BYOD) trend by providing advanced functionality at the right price point. RF Excellence. Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 1600 Series delivers secure & reliable wireless connections. Enterprise-class chipsets & optimized radios deliver a robust mobility experience with:
- 802.11n with 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, which sustains 300-Mbps rates over a greater range for more capacity & reliability than competing access points.
- Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce dead spots & help ensure high-availability client connections.
- Clean Air Express: Effectively detects RF interference & provides basic spectrum analysis capability while simplifying ongoing operations.
- Cisco Client Link 2.0 technology: Improves downlink performance to all mobile devices including 802.11n while improving battery life on mobile devices such as smartphones & tablets.
- Cisco Band Select technology: Improves 5-GHz client connections in mixed-client environments.
- Cisco Video Stream technology: Uses multicast to improve rich-media applications.
- Building on the Cisco All of these features help ensure the best possible end-user experience on the wireless network. Cisco also offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios. Scalability. The Cisco Aironet 1600 Series is a component of the Cisco Unified Wireless Network, which can scale to up to 18, 000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, & at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, & scalable architecture delivering secure access to mobility services & applications, & offering the lowest total cost of ownership & investment protection by integrating seamlessly with the existing wired network.








...

The new Cisco Aironet 1600 Series Access Point is an enterprise-class, entry-level, 802.11n-based access point designed to address the wireless connectivity needs of small & medium-sized enterprise networks. The Aironet 1600 Series delivers great performance at an attractive price for customers while providing advanced functionality such as Clean Air Express 1 for better cover through spectrum intelligence & Clientlink 2.0 for entry level networks that have a mixed client base. In addition to these features, the Aironet 1600 series

Includes:: 802.11n-based 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, making it ideal for small & medium-sized enterprises. The Aironet 1600 Series also provides at least six times the throughput of existing 802.11a/g networks. As part of the Cisco Aironet Wireless portfolio, the Cisco Aironet 1600 Series access point provides low total cost of ownership & investment protection by integrating seamlessly with the existing network. With an entry-level path to 802.11n migration, the Aironet 1600 Series can add capacity to the network for future growth for expanding applications & bandwidth. Designed with rapidly evolving mobility needs in mind, the Cisco Aironet 1600 Series Access Point addresses the bring-your-own-device (BYOD) trend by providing advanced functionality at the right price point. RF Excellence. Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 1600 Series delivers secure & reliable wireless connections. Enterprise-class chipsets & optimized radios deliver a robust mobility experience with:
- 802.11n with 3x 3 multiple-input multiple-output (MIMO) technology with two spatial streams, which sustains 300-Mbps rates over a greater range for more capacity & reliability than competing access points.
- Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce dead spots & help ensure high-availability client connections.
- Clean Air Express: Effectively detects RF interference & provides basic spectrum analysis capability while simplifying ongoing operations.
- Cisco Client Link 2.0 technology: Improves downlink performance to all mobile devices including 802.11n while improving battery life on mobile devices such as smartphones & tablets.
- Cisco Band Select technology: Improves 5-GHz client connections in mixed-client environments.
- Cisco Video Stream technology: Uses multicast to improve rich-media applications.
- Building on the Cisco All of these features help ensure the best possible end-user experience on the wireless network. Cisco also offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios. Scalability. The Cisco Aironet 1600 Series is a component of the Cisco Unified Wireless Network, which can scale to up to 18, 000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, & at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, & scalable architecture delivering secure access to mobility services & applications, & offering the lowest total cost of ownership & investment protection by integrating seamlessly with the existing wired network.








...