The 5300 Entry SATA solid-state drives (SSDs) are new SSDs for Think System servers. The drives use Micron 96-layer 3D NAND flash memory technology with a SATA 6 Gbps interface & provide an affordable solution for read-intensive applications such as boot, web servers, lower data rate operational databases & analytics. This product guide provides essential presales information to understand the 5300 Entry SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n\n\n Hard drive SSD capacity 240 GBMemory type 3D TLC NANDData transmission Read speed 540 MB/s Write speed 310 MB/s Random write (4KB)40 IOPSRandom read (4KB)67 IOPSWrite latency 300 &181;s Read latency 175 &181;s Data transfer rate 6 Gbit/s Security Security algorithms 256-bit AESEndurance Mean time between failures (MTBF)3000000 h Performance Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 240 GBSecurity algorithms 256-bit AESRead speed 540 MB/s Write speed 310 MB/s Memory type 3D TLC NANDRandom write (4KB)40 IOPSRandom read (4KB)67 IOPSMean time between failures (MTBF)3000000 h Write latency 300 &181;s Read latency 175 &181;s Hardware encryption Yes Data transfer rate 6 Gbit/s Design Component for Server/workstation SSD form factor 2.5" Features Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 240 GBSecurity algorithms 256-bit AESRead speed 540 MB/s Write speed 310 MB/s Memory type 3D TLC NANDRandom write (4KB)40 IOPSRandom read (4KB)67 IOPSMean time between failures (MTBF)3000000 h Write latency 300 &181;s Read latency 175 &181;s Hardware encryption Yes Data transfer rate 6 Gbit/s SSD form factor 2.5" Power Power consumption (write)3 WPower consumption (read)2.5 WOperational conditions Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Vibration resistance 3.13 GTechnical details Interface Serial ATA IIIHot-swap Yes Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Hardware encryption Yes SSD form factor 2.5" Sustainability certificates Ro HS\n\n\n\n





...

The 5300 Entry SATA solid-state drives (SSDs) are new SSDs for Think System servers. The drives use Micron 96-layer 3D NAND flash memory technology with a SATA 6 Gbps interface & provide an affordable solution for read-intensive applications such as boot, web servers, lower data rate operational databases & analytics.\n\n This product guide provides essential presales information to understand the 5300 Entry SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n\n\n\n\n Product Model: 4XB7A17076\n\n\n ...

The 5300 Entry SATA solid-state drives (SSDs) are new SSDs for Think System servers. The drives use Micron 96-layer 3D NAND flash memory technology with a SATA 6 Gbps interface & provide an affordable solution for read-intensive applications such as boot, web servers, lower data rate operational databases & analytics.\n\n This product guide provides essential presales information to understand the 5300 Entry SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n\n\n\n\n Product Model: 4XB7A17076\n\n\n ...

Abstract\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron NAND flash memory technology with a SATA 6 Gbps interface to provide an affordable solution for mixed read/write workloads.\n\n This product guide provides essential presales information to understand the 5300 Mainstream SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n Change History\n Changes in the January 7 update:\n- Added SR850P to the server support table (no support)
- Server support section\n\n Introduction\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron 96-layer 3D NAND flash memory technology with a 6 Gbps SATA interface. They provide an affordable solution for mixed read/write applications such as cache in transactional applications & high-speed storage for enterprise databases.\n\n SSDs have a huge but finite number of program/erase (P/E) cycles, which affect how long they can perform write operations & thus their life expectancy. Mainstream SSDs typically have a better cost per read IOPS ratio but lower endurance & performance compared to Performance SSDs. SSD write endurance is typically measured by the number of program/erase cycles that the drive can incur over its lifetime, which is listed as total bytes written (TBW) in the device

Specification.\n\n The TBW value that is assigned to a solid-state device is the total bytes of written data that a drive can be guaranteed to complete. Reaching this limit does not cause the drive to immediately fail; the TBW simply denotes the maximum number of writes that can be guaranteed. A solid-state device does not fail upon reaching the specified TBW. However, at some point after surpassing the TBW value (and based on manufacturing variance margins), the drive reaches the end-of-life point, at which time the drive goes into read-only mode. Because of such behavior, careful planning must be done to use SSDs in the application environments to ensure that the TBW of the drive is not exceeded before the required life expectancy.\n\n For example, the 5300 Mainstream 1.92 TB drive has an endurance of 17, 520 TB of total bytes written (TBW). This means that for full operation over five years, write workload must be limited to no more than 9, 600 GB of writes per day, which is equivalent to 5.0 full drive writes per day (DWPD). For the device to last three years, the drive write workload must be limited to no more than 16, 000 GB of writes per day, which is equivalent to 8.3 full drive writes per day.\n\n\n\n\n\n\n\n Model: 4XB7A17089\n\n\n\n\n\n\n\n


...

Abstract\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron NAND flash memory technology with a SATA 6 Gbps interface to provide an affordable solution for mixed read/write workloads.\n\n This product guide provides essential presales information to understand the 5300 Mainstream SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n Change History\n Changes in the January 7 update:\n- Added SR850P to the server support table (no support)
- Server support section\n\n Introduction\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron 96-layer 3D NAND flash memory technology with a 6 Gbps SATA interface. They provide an affordable solution for mixed read/write applications such as cache in transactional applications & high-speed storage for enterprise databases.\n\n SSDs have a huge but finite number of program/erase (P/E) cycles, which affect how long they can perform write operations & thus their life expectancy. Mainstream SSDs typically have a better cost per read IOPS ratio but lower endurance & performance compared to Performance SSDs. SSD write endurance is typically measured by the number of program/erase cycles that the drive can incur over its lifetime, which is listed as total bytes written (TBW) in the device

Specification.\n\n The TBW value that is assigned to a solid-state device is the total bytes of written data that a drive can be guaranteed to complete. Reaching this limit does not cause the drive to immediately fail; the TBW simply denotes the maximum number of writes that can be guaranteed. A solid-state device does not fail upon reaching the specified TBW. However, at some point after surpassing the TBW value (and based on manufacturing variance margins), the drive reaches the end-of-life point, at which time the drive goes into read-only mode. Because of such behavior, careful planning must be done to use SSDs in the application environments to ensure that the TBW of the drive is not exceeded before the required life expectancy.\n\n For example, the 5300 Mainstream 1.92 TB drive has an endurance of 17, 520 TB of total bytes written (TBW). This means that for full operation over five years, write workload must be limited to no more than 9, 600 GB of writes per day, which is equivalent to 5.0 full drive writes per day (DWPD). For the device to last three years, the drive write workload must be limited to no more than 16, 000 GB of writes per day, which is equivalent to 8.3 full drive writes per day.\n\n\n\n\n\n\n\n Model: 4XB7A17089\n\n\n\n\n\n\n\n


...

Lenovo offers a broad range of solid-state drives from the major flash storage vendors. We offer SATA, SAS & NVMe drives to support a variety of workloads & performance needs. This web page means that you can compare the capabilities of the 2.5-inch & 3.5-inch drives available from Lenovo.\n\n\n\n Hard drive SSD capacity 960 GBMemory type TLCData transmission Read speed 486 MB/s Write speed 459 MB/s Random write (4KB)22500 IOPSRandom read (4KB)85500 IOPSData transfer rate 6 Gbit/s Performance Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 960 GBRead speed 486 MB/s Write speed 459 MB/s Memory type TLCRandom write (4KB)22500 IOPSRandom read (4KB)85500 IOPSHardware encryption No Data transfer rate 6 Gbit/s Compatible products ST250, SR250, ST550, SR530, SR530, SR550, SR570, SR590, SR630, SR650, SR670, SR635, SR655, SR645, SR665, SR850, SR850P, SR860, SR950 Design Component for Server/workstation SSD form factor 2.5" Features Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 960 GBRead speed 486 MB/s Write speed 459 MB/s Memory type TLCRandom write (4KB)22500 IOPSRandom read (4KB)85500 IOPSHardware encryption No Data transfer rate 6 Gbit/s SSD form factor 2.5" Compatible products ST250, SR250, ST550, SR530, SR530, SR550, SR570, SR590, SR630, SR650, SR670, SR635, SR655, SR645, SR665, SR850, SR850P, SR860, SR950 Technical details Interface Serial ATA IIIHot-swap Yes Hardware encryption No SSD form factor 2.5"\n\n\n\n ...

Fibocom L850-GL is an industry-leading LTE CAT9 high-speed full netcom module, developed on the Intel 7360 platform, adopting the M.2 interface with a size of 30*40*2.3mm. With a downlink speed of up to 450 Mbps & an uplink speed of up to 50 Mbps, the L850-GL is the perfect cellular solution for world travellers' devices that need top connectivity speed anywhere LTE is present. It is a top application choice for you to upgrade the Think Pad from lower speed modules. Feature Feature Value Type WWAN Card Brand compatibility Lenovo Compatibility Think Pad Product colour Green ...

Fibocom L850-GL is an industry-leading LTE CAT9 high-speed full netcom module, developed on the Intel 7360 platform, adopting the M.2 interface with a size of 30*40*2.3mm. With a downlink speed of up to 450 Mbps & an uplink speed of up to 50 Mbps, the L850-GL is the perfect cellular solution for world travellers' devices that need top connectivity speed anywhere LTE is present. It is a top application choice for you to upgrade the Think Pad from lower speed modules. Feature Feature Value Type WWAN Card Brand compatibility Lenovo Compatibility Think Pad Product colour Green ...

The Lenovo Headphones provide great sound & fit every ear. With 3 unique designs, you can find a fit for any ear. The headphones provide excellent sound from your Think system&153;s 3.5mm audio jack. The inline controls work the majority of smart phones in the market so in between the office & your home, you can stay in touch & on the go.3.5mm audio works with Think Pads, tablets, work stations & smart phones.\n Lightweight design allows user to carry with them\n Unique ear designs:\n On Ear fits like a classic earbud headphone\n In Ear fits comfortably inside the ear canal, with 3 silicon tips\n Over-The-Ear combines the best of the in ear headphone with an over the ear loop to keep the headphones securely in place.\n Inline microphone is small & light, perfectly placed to make crystal clear calls\n Inline answer & hang up control works with the majority of smart phones. Feature Feature Value Ear coupling Intraaural Headphone sensitivity 90 d B Impedance 32 &206;&169; Total Harmonic Distortion (THD)5% Channel separation 3 d B Connectivity technology Wired 3.5 mm connector Y Cable length 1.3 m Microphone in Y Wearing style In-ear Product colour Black Operating temperature (T-T)-5
- 40 &176;COperating relative humidity (H-H)20
- 90% Manual Y Weight 20 g

...

The Lenovo Headphones provide great sound & fit every ear. With 3 unique designs, you can find a fit for any ear. The headphones provide excellent sound from your Think system&153;s 3.5mm audio jack. The inline controls work the majority of smart phones in the market so in between the office & your home, you can stay in touch & on the go.3.5mm audio works with Think Pads, tablets, work stations & smart phones.\n Lightweight design allows user to carry with them\n Unique ear designs:\n On Ear fits like a classic earbud headphone\n In Ear fits comfortably inside the ear canal, with 3 silicon tips\n Over-The-Ear combines the best of the in ear headphone with an over the ear loop to keep the headphones securely in place.\n Inline microphone is small & light, perfectly placed to make crystal clear calls\n Inline answer & hang up control works with the majority of smart phones. Feature Feature Value Ear coupling Intraaural Headphone sensitivity 90 d B Impedance 32 &206;&169; Total Harmonic Distortion (THD)5% Channel separation 3 d B Connectivity technology Wired 3.5 mm connector Y Cable length 1.3 m Microphone in Y Wearing style In-ear Product colour Black Operating temperature (T-T)-5
- 40 &176;COperating relative humidity (H-H)20
- 90% Manual Y Weight 20 g

...