M.2 is a solid-state drive (SSD) form factor primarily used as an operating system boot solution however depending on the endurance of the M.2 drives, they may also be suitable for read-intensive or mixed workloads.\n\n Lenovo Think System servers support M.2 drives in one of three ways, depending on the server selected:\n- One or two drives, mounted in an M.2 adapter, vertically in a dedicated slot\n- Two or four drives, mounted horizontally in an M.2 adapter\n- Installed directly on the system board\n\n One example is the Dual M.2 Adapter, as shown in the following figure, with one 128GB M.2 drive partially inserted. The second M.2 drive is installed on the other side of the adapter.\n\n\n\n\n\n\n\n Model: 4XB7A17071\n\n\n\n\n\n\n\n ...

M.2 is a solid-state drive (SSD) form factor primarily used as an operating system boot solution however depending on the endurance of the M.2 drives, they may also be suitable for read-intensive or mixed workloads.\n\n Lenovo Think System servers support M.2 drives in one of three ways, depending on the server selected:\n- One or two drives, mounted in an M.2 adapter, vertically in a dedicated slot\n- Two or four drives, mounted horizontally in an M.2 adapter\n- Installed directly on the system board\n\n One example is the Dual M.2 Adapter, as shown in the following figure, with one 128GB M.2 drive partially inserted. The second M.2 drive is installed on the other side of the adapter.\n\n\n\n\n\n\n\n Model: 4XB7A17071\n\n\n\n\n\n\n\n ...

M.2 is a solid-state drive (SSD) form factor primarily used as an operating system boot solution. Lenovo Think System servers support M.2 drives either with the addition of a supported M.2 adapter or module, or directly on the system board.\n\n This product guide provides essential presales information to understand the Think System M.2 offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the M.2 components, & consider their use in IT solutions.\n\n\n\n\n\n\n\n Model: 4XB7A17073\n\n\n\n\n\n\n\n ...

M.2 is a solid-state drive (SSD) form factor primarily used as an operating system boot solution. Lenovo Think System servers support M.2 drives either with the addition of a supported M.2 adapter or module, or directly on the system board.\n\n This product guide provides essential presales information to understand the Think System M.2 offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the M.2 components, & consider their use in IT solutions.\n\n\n\n\n\n\n\n Model: 4XB7A17073\n\n\n\n\n\n\n\n ...

The 5300 Entry SATA solid-state drives (SSDs) are new SSDs for Think System servers. The drives use Micron 96-layer 3D NAND flash memory technology with a SATA 6 Gbps interface & provide an affordable solution for read-intensive applications such as boot, web servers, lower data rate operational databases & analytics. This product guide provides essential presales information to understand the 5300 Entry SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n\n\n Hard drive SSD capacity 240 GBMemory type 3D TLC NANDData transmission Read speed 540 MB/s Write speed 310 MB/s Random write (4KB)40 IOPSRandom read (4KB)67 IOPSWrite latency 300 &181;s Read latency 175 &181;s Data transfer rate 6 Gbit/s Security Security algorithms 256-bit AESEndurance Mean time between failures (MTBF)3000000 h Performance Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 240 GBSecurity algorithms 256-bit AESRead speed 540 MB/s Write speed 310 MB/s Memory type 3D TLC NANDRandom write (4KB)40 IOPSRandom read (4KB)67 IOPSMean time between failures (MTBF)3000000 h Write latency 300 &181;s Read latency 175 &181;s Hardware encryption Yes Data transfer rate 6 Gbit/s Design Component for Server/workstation SSD form factor 2.5" Features Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 240 GBSecurity algorithms 256-bit AESRead speed 540 MB/s Write speed 310 MB/s Memory type 3D TLC NANDRandom write (4KB)40 IOPSRandom read (4KB)67 IOPSMean time between failures (MTBF)3000000 h Write latency 300 &181;s Read latency 175 &181;s Hardware encryption Yes Data transfer rate 6 Gbit/s SSD form factor 2.5" Power Power consumption (write)3 WPower consumption (read)2.5 WOperational conditions Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Vibration resistance 3.13 GTechnical details Interface Serial ATA IIIHot-swap Yes Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 95% Hardware encryption Yes SSD form factor 2.5" Sustainability certificates Ro HS\n\n\n\n





...

The 5300 Entry SATA solid-state drives (SSDs) are new SSDs for Think System servers. The drives use Micron 96-layer 3D NAND flash memory technology with a SATA 6 Gbps interface & provide an affordable solution for read-intensive applications such as boot, web servers, lower data rate operational databases & analytics.\n\n This product guide provides essential presales information to understand the 5300 Entry SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n\n\n\n\n Product Model: 4XB7A17076\n\n\n ...

Abstract\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron NAND flash memory technology with a SATA 6 Gbps interface to provide an affordable solution for mixed read/write workloads.\n\n This product guide provides essential presales information to understand the 5300 Mainstream SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n Change History\n Changes in the January 7 update:\n- Added SR850P to the server support table (no support)
- Server support section\n\n Introduction\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron 96-layer 3D NAND flash memory technology with a 6 Gbps SATA interface. They provide an affordable solution for mixed read/write applications such as cache in transactional applications & high-speed storage for enterprise databases.\n\n SSDs have a huge but finite number of program/erase (P/E) cycles, which affect how long they can perform write operations & thus their life expectancy. Mainstream SSDs typically have a better cost per read IOPS ratio but lower endurance & performance compared to Performance SSDs. SSD write endurance is typically measured by the number of program/erase cycles that the drive can incur over its lifetime, which is listed as total bytes written (TBW) in the device

Specification.\n\n The TBW value that is assigned to a solid-state device is the total bytes of written data that a drive can be guaranteed to complete. Reaching this limit does not cause the drive to immediately fail; the TBW simply denotes the maximum number of writes that can be guaranteed. A solid-state device does not fail upon reaching the specified TBW. However, at some point after surpassing the TBW value (and based on manufacturing variance margins), the drive reaches the end-of-life point, at which time the drive goes into read-only mode. Because of such behavior, careful planning must be done to use SSDs in the application environments to ensure that the TBW of the drive is not exceeded before the required life expectancy.\n\n For example, the 5300 Mainstream 1.92 TB drive has an endurance of 17, 520 TB of total bytes written (TBW). This means that for full operation over five years, write workload must be limited to no more than 9, 600 GB of writes per day, which is equivalent to 5.0 full drive writes per day (DWPD). For the device to last three years, the drive write workload must be limited to no more than 16, 000 GB of writes per day, which is equivalent to 8.3 full drive writes per day.\n\n\n\n\n\n\n\n Model: 4XB7A17089\n\n\n\n\n\n\n\n


...

Abstract\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron NAND flash memory technology with a SATA 6 Gbps interface to provide an affordable solution for mixed read/write workloads.\n\n This product guide provides essential presales information to understand the 5300 Mainstream SSD offerings, their key features & specifications, components & options, & configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, & other IT professionals who want to learn more about the SSDs & consider their use in IT solutions.\n\n Change History\n Changes in the January 7 update:\n- Added SR850P to the server support table (no support)
- Server support section\n\n Introduction\n The Think System 5300 Mainstream SATA 6 Gb solid-state drives (SSDs) use Micron 96-layer 3D NAND flash memory technology with a 6 Gbps SATA interface. They provide an affordable solution for mixed read/write applications such as cache in transactional applications & high-speed storage for enterprise databases.\n\n SSDs have a huge but finite number of program/erase (P/E) cycles, which affect how long they can perform write operations & thus their life expectancy. Mainstream SSDs typically have a better cost per read IOPS ratio but lower endurance & performance compared to Performance SSDs. SSD write endurance is typically measured by the number of program/erase cycles that the drive can incur over its lifetime, which is listed as total bytes written (TBW) in the device

Specification.\n\n The TBW value that is assigned to a solid-state device is the total bytes of written data that a drive can be guaranteed to complete. Reaching this limit does not cause the drive to immediately fail; the TBW simply denotes the maximum number of writes that can be guaranteed. A solid-state device does not fail upon reaching the specified TBW. However, at some point after surpassing the TBW value (and based on manufacturing variance margins), the drive reaches the end-of-life point, at which time the drive goes into read-only mode. Because of such behavior, careful planning must be done to use SSDs in the application environments to ensure that the TBW of the drive is not exceeded before the required life expectancy.\n\n For example, the 5300 Mainstream 1.92 TB drive has an endurance of 17, 520 TB of total bytes written (TBW). This means that for full operation over five years, write workload must be limited to no more than 9, 600 GB of writes per day, which is equivalent to 5.0 full drive writes per day (DWPD). For the device to last three years, the drive write workload must be limited to no more than 16, 000 GB of writes per day, which is equivalent to 8.3 full drive writes per day.\n\n\n\n\n\n\n\n Model: 4XB7A17089\n\n\n\n\n\n\n\n


...

Lenovo offers a broad range of solid-state drives from the major flash storage vendors. We offer SATA, SAS & NVMe drives to support a variety of workloads & performance needs. This web page means that you can compare the capabilities of the 2.5-inch & 3.5-inch drives available from Lenovo.\n\n\n\n\n\n\n\n Model: 4XB7A38272\n\n\n\n\n\n\n\n ...

Lenovo offers a broad range of solid-state drives from the major flash storage vendors. We offer SATA, SAS & NVMe drives to support a variety of workloads & performance needs. This web page means that you can compare the capabilities of the 2.5-inch & 3.5-inch drives available from Lenovo.\n\n\n\n Hard drive SSD capacity 960 GBMemory type TLCData transmission Read speed 486 MB/s Write speed 459 MB/s Random write (4KB)22500 IOPSRandom read (4KB)85500 IOPSData transfer rate 6 Gbit/s Performance Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 960 GBRead speed 486 MB/s Write speed 459 MB/s Memory type TLCRandom write (4KB)22500 IOPSRandom read (4KB)85500 IOPSHardware encryption No Data transfer rate 6 Gbit/s Compatible products ST250, SR250, ST550, SR530, SR530, SR550, SR570, SR590, SR630, SR650, SR670, SR635, SR655, SR645, SR665, SR850, SR850P, SR860, SR950 Design Component for Server/workstation SSD form factor 2.5" Features Interface Serial ATA IIIComponent for Server/workstation NVMe No Hot-swap Yes SSD capacity 960 GBRead speed 486 MB/s Write speed 459 MB/s Memory type TLCRandom write (4KB)22500 IOPSRandom read (4KB)85500 IOPSHardware encryption No Data transfer rate 6 Gbit/s SSD form factor 2.5" Compatible products ST250, SR250, ST550, SR530, SR530, SR550, SR570, SR590, SR630, SR650, SR670, SR635, SR655, SR645, SR665, SR850, SR850P, SR860, SR950 Technical details Interface Serial ATA IIIHot-swap Yes Hardware encryption No SSD form factor 2.5"\n\n\n\n ...