The Digita Linx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio & video up to 4K@60 Hz 4:4:4/ 8 bit color with HDR support & bidirectional IR up to 70 meters away using a single solid core shielded Category 6 twisted pair cable. Supports HDMI 2.0a HDR10 & HDCP 2.2 as well as Dolby Atmos & DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.\n\n The extender system uses 2:1 data compression when the signal surpasses 10 Gbps anything under 10 Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18 Gbps supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10 Gbps or less.\n\n Built-in surge protection helps ensure hassle-free & robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.\n\n The DL-HD70LS-H2 is sold only as a set. The individual transmitter & receiver are not compatible with other HDBase T devices due to proprietary Po E circuitry.\n\n Features & Benefits\n\n&162; Complete set

Includes:: TX RX power supply & IR flasher/emitter\n&162; Extend HDMI 2.0 signals up to 4K@60 Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m)\n&162; Extends bi-directional IR\n&162; Supports HDR10\n&162; HDCP 2.2 compliant\n&162; Flexible power design (use power supply at TX or RX)\n&162;

Includes:: re-clocking circuitry for maximum device compatibility\n&162; Locking power connector (power supply included)\n\n Applications\n\n&162; Extend HDMI source up to 18G\n&162; Residential home theater extension\n&162; 4K HDR10\n&162; Residential commercial house of worship higher education



...

The Digita Linx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio & video up to 4K@60 Hz 4:4:4/ 8 bit color with HDR support & bidirectional IR up to 70 meters away using a single solid core shielded Category 6 twisted pair cable. Supports HDMI 2.0a HDR10 & HDCP 2.2 as well as Dolby Atmos & DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.\n\n The extender system uses 2:1 data compression when the signal surpasses 10 Gbps anything under 10 Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18 Gbps supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10 Gbps or less.\n\n Built-in surge protection helps ensure hassle-free & robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.\n\n The DL-HD70LS-H2 is sold only as a set. The individual transmitter & receiver are not compatible with other HDBase T devices due to proprietary Po E circuitry.\n\n Features & Benefits\n\n&162; Complete set

Includes:: TX RX power supply & IR flasher/emitter\n&162; Extend HDMI 2.0 signals up to 4K@60 Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m)\n&162; Extends bi-directional IR\n&162; Supports HDR10\n&162; HDCP 2.2 compliant\n&162; Flexible power design (use power supply at TX or RX)\n&162;

Includes:: re-clocking circuitry for maximum device compatibility\n&162; Locking power connector (power supply included)\n\n Applications\n\n&162; Extend HDMI source up to 18G\n&162; Residential home theater extension\n&162; 4K HDR10\n&162; Residential commercial house of worship higher education



...

The Digita Linx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio & video up to 4K@60 Hz 4:4:4/ 8 bit color with HDR support & bidirectional IR up to 70 meters away using a single solid core shielded Category 6 twisted pair cable. Supports HDMI 2.0a HDR10 & HDCP 2.2 as well as Dolby Atmos & DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.\n\n The extender system uses 2:1 data compression when the signal surpasses 10 Gbps anything under 10 Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18 Gbps supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10 Gbps or less.\n\n Built-in surge protection helps ensure hassle-free & robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.\n\n The DL-HD70LS-H2 is sold only as a set. The individual transmitter & receiver are not compatible with other HDBase T devices due to proprietary Po E circuitry.\n\n Features & Benefits\n\n&162; Complete set

Includes:: TX RX power supply & IR flasher/emitter\n&162; Extend HDMI 2.0 signals up to 4K@60 Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m)\n&162; Extends bi-directional IR\n&162; Supports HDR10\n&162; HDCP 2.2 compliant\n&162; Flexible power design (use power supply at TX or RX)\n&162;

Includes:: re-clocking circuitry for maximum device compatibility\n&162; Locking power connector (power supply included)\n\n Applications\n\n&162; Extend HDMI source up to 18G\n&162; Residential home theater extension\n&162; 4K HDR10\n&162; Residential commercial house of worship higher education



...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=21353263&l=en\n\n ...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=21353263&l=en\n\n ...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=15079248&l=en\n\n ...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=13382811&l=en\n\n ...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=13382809&l=en\n\n ...

Datasheet: https://uk.ingrammicro.eu/cfs/ Icecat/PDF.aspxs=13382810&l=en\n\n ...

100V line mixer-amp with digital amplifier in a compact housing. Onboard audio player accepts USB (Universal Serial Bus) media for digital audio or can be tuned to FM radio stations. In Bluetooth mode a smart phone or tablet may be paired with the DM25 for wireless audio playback. Mono output to either 100V line or 4-16 ohms speaker load is connected via spring terminals on the rear panel. All-in-one solution for small sound installations.\n\n&162; Bluetooth connectivity\n&162; Integral USB (Universal Serial Bus) player & FM tuner\n&162; 100V line or 4-16 Ohms operation Features Power Output 40 Wrms Mixer Amplifier Yes Weight 1.74 kg ...