- Real time 256-bit AES hardware encryption
- No software or drivers required
- Super Speed USB (Universal Serial Bus) 3.0

...

Overview The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds -- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction & is backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. The Star Tech.com Advantage
- Time-saving file transfers, up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-supported host
- Maximize performance, with file transfer speeds up to 6 Gbps using e SATA
- Versatile connectivity options, through either USB (Universal Serial Bus) or e SATA
- Maximum durability, with aluminum housing



...

The S3510SMU33 USB (Universal Serial Bus) 3.0 hard drive enclosure enables you to connect a 3.5in SATA hard drive through an available USB (Universal Serial Bus) port. With support for UASP, the enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for SATA I/II/III hard drives at capacities of up to 4TB. Plus, the enclosure features high-quality aluminum construction & a stylish silver design that looks great in any application. The S3510SMU33 USB (Universal Serial Bus) 3.0 HDD enclosure is backed by a 2-year Star Tech.com warranty & free lifetime technical support. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. The Star Tech.com Advantage
- Save time, with file transfers up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-supported host.
- Maximum durability, with aluminum housing.

...

The SAT2510B12U3 USB (Universal Serial Bus) 3.0 External SATA Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0. Uniquely designed to be able to fit both 9.5mm & high capacity 12.5mm height hard drives for compatibility with virtually any available SATA hard drive. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that don't support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively).
...

The SAT2510U3REM Removable 2.5" SATA HDD Backup System/ Mobile Rack turns a 2.5" SATA HDD/SSD drive into a removable hard drive that can also be used externally as a normal USB (Universal Serial Bus) 3.0 enclosure. This 2.5" SATA removable hard drive bay can be mounted into any 3.5" or 5.25" front bay, to provide a hot-swap capable mobile rack. Drives can then be easily installed & removed from the computer system without having to open the computer case every time, providing a convenient method of creating backups that can then be removed for safe keeping/archiving. When outside of the drive bay, the enclosure can be used as a standard external USB (Universal Serial Bus) 3.0 hard drive with up to 5 Gbps of data transfer bandwidth (10x more than USB (Universal Serial Bus) 2.0). This makes the removable 2.5" hard drive bay an excellent accessory for people working with very large files & need to take them on the road. The SAT2510U3REM Removable HDD Backup System is backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage
- Simplifies managing/mounting backup drives, by adding removable internal storage.
- Quickly replace/exchange hard drives without having to open up the computer.
- Simplify deployments by being able to install in 3.5" or 5.25" front bays.
- Save time & backup data faster by taking advantage of SATA 6 Gbps host connections.
- Conveniently & safely access the drive even when removed from the host system.




...

This e SATA/USB Removable SATA HD Enclosure features a convenient trayless design that eliminates having to mount the hard drive in the enclosure, making it easier to access data on the fly. Simply insert any 3.5in SATA II (SATA /300) or SATA (SATA /150) hard drive (up to 2 TB capacity) into the enclosure, close the panel door & connect the enclosure to the computer through either e SATA (external SATA) or USB (Universal Serial Bus). To remove the hard drive from the enclosure, simply open the panel door & pull the SATA hard drive out. Because the SAT3510BUEGB drive enclosure can be connected to a host computer through either e SATA or USB (Universal Serial Bus), you can rely on efficient data transfer speeds (up to 3 Gbps for e SATA, 480 Mbps for USB (Universal Serial Bus) 2.0) & quick connectivity. The enclosure is constructed to provide a durable housing for inserted drives to prevent physical damage to the drives while in transit, & features lockable front door access for added data security. To ensure a cool operating environment, the SATA HDD enclosure provides a built-in 40mm fan that re-distributes the heat build-up generated as a result of typical hard drive operation
- which is especially important for large volume storage (750GB to 2TB hard drives), & faster spinning drives (i.e. 7200 RPM), as it can help optimize drive operability & in turn preserve stored data integrity.
...

Turn a 3.5in SATA drive into an external USB (Universal Serial Bus) 3.0 hard drive The Star Tech.com USB (Universal Serial Bus) 3.0 to SATA external hard drive enclosure allows almost any standard 3.5in internal SATA Hard Disk Drive (HDD) to be made into a cost-effective external Super Speed USB (Universal Serial Bus) 3.0 hard drive. With transfer rates up to 5 Gbps, which is 10 times faster than USB (Universal Serial Bus) 2.0 (480 Mbps), speed is no longer compromised for convenience, ease of use or portability. Still being backwards compatible with USB (Universal Serial Bus) 2.0, however, this enclosure ensure it will still work with computers that don't have USB (Universal Serial Bus) 3.0 ports yet. Made using sturdy, light-weight aluminum & no fans, the enclosure offers optimal & quiet cooling for even current, high capacity hard drives. ...

The SAT3520U3R USB (Universal Serial Bus) 3.0 to Dual 3.5-inch SATA Trayless Hard Drive Enclosure makes adding fast external storage easy, by turning any two 3.5-inch internal SATA hard drives into an external hard drive. The hard drive enclosure features a trayless system that eliminates having to mount & fasten the hard drive into the enclosure or tray, for quick & easy installation or removal. Using the Super Speed USB (Universal Serial Bus) 3.0 interface, which is up to 10 times faster than the previous USB (Universal Serial Bus) 2.0, makes backing up & transferring large files faster than ever, while still being usable on older USB (Universal Serial Bus) 2.0 systems. With built-in RAID capabilities (0, 1, BIG, JBOD), the two drives can be combined for speed, redundancy or capacity or even left as separate drives, based on situation needs.
- Trayless design: 3.5in drives are not mounted to a tray or the enclosure chassis/frame
- Super Speed USB (Universal Serial Bus) 3.0 compliant host interface, which supports transfer rates up to 5 Gbps
- RAID support: 0, 1, BIG (Concatenation), JBOD
- Backward compatible with USB (Universal Serial Bus) 2.0 systems, out of the box
- 55mm cooling fan
- Lockable drive doors
- Power & Activity LED indicators
- Plug-&-Play & Hot-Swap compatible







...

The SAT3520U3SR USB (Universal Serial Bus) 3.0 RAID Enclosure turns two 3.5" SATA (SATA I, SATA II, SATA III) hard drives into an external RAID array through a USB (Universal Serial Bus) 3.0 connection. Large capacity drives (tested with up to 4TB per bay) can be used to greatly enhance your computer storage/backup capabilities. Whether it's greater capacity or data redundancy you're looking for, this USB (Universal Serial Bus) 3.0 dual drive enclosure is the solution, with built-in support for multiple RAID modes (RAID 0, 1, JBOD) which enables the enclosure to fit the role you need. The drive enclosure also supports non-RAID operation, so both drives can be used independant. Compliant with the Super Speed USB (Universal Serial Bus) 3.0

Specification, which can provide up to 5 Gbps of data bandwidth (10x more than USB (Universal Serial Bus) 2.0), the SAT3520U3SR RAID enclosure makes it easier & faster to transfer or stream large amounts of data. Although the dual drive enclosure will perform at peak speeds when connected to a USB (Universal Serial Bus) 3.0 host computer, it is also more than suitable for use with older systems, as it is backward compatible with USB (Universal Serial Bus) 2.0 connections.
- Dual bay USB (Universal Serial Bus) 3.0 enclosure supports the latest USB (Universal Serial Bus) standard for up to 5 Gbps of data bandwidth for faster data transfers than USB (Universal Serial Bus) 2.0.
- Built-in support for multiple RAID modes suit most personal/business needs for easier setup.
- USB (Universal Serial Bus) 3.0 RAID enclosure with a 50mm cooling fan keeps the hard drives cool over extended periods of activity, for optimized performance.




...

The SAT35401U Rack-mountable 4-bay trayless HDD enclosure enables you to mount & hot-swap up to four 3.5" SATA or SAS hard drives into 1U of rack/cabinet storage space. To ensure maximum performance & versatility, the enclosure offers support for SATA/SAS HDD speeds up to 6.0 Gbps with a mini SAS interface & is fully compatible with RAID controllers for enhanced storage applications. The rugged steel rack-mountable chassis with 3 built-in fans makes it an ideal solution for any server environment that requires hot-swappable storage. The SAT35401U is backed by a Star Tech.com 2-year warranty & lifetime technical support. The Star Tech.com Advantage
- Hassle-free drive swapping in server environments, with 1U rack-mountable chasiss.
- Maximum performance with SAS/SATA transfer speeds up to 6 Gbps.

...