The PLATE9M16LP (16 inch/ 0.4 m) Low Profile Serial Plate adds a DB9 serial port to the rear panel of a small form factor/low profile computer, connecting to an IDC10 header connector on the motherboard. Constructed of high quality components, this durable low profile DB9 bracket is backed by Star Tech.com′s lifetime warranty. Please refer to this product's Technical Specifications to ensure compatibility with your motherboard. ...

Connect a 2.5in IDE laptop hard drive to an IDE-equipped desktop computer. This 2.5in to 3.5in IDE Hard Drive Adapter cable provides a 44-pin female IDE connector & a 40-pin male IDE connector as well as an LP4 power supply connection, allowing you to connect a 2.5in IDE laptop hard drive to a desktop computer. " * Cost-effective solution for connecting a 2.5in IDE laptop hard drive to a desktop computer * Easy to use & install * Backed by Star Tech.com's lifetime warranty" ...

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard\n\n The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port
- a cost effective solution that means that you can add newer SATA drives, & keep your existing motherboard.\n\n The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive & older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.\n\n The IDE/SATA adapter is backed by a Star Tech.com 2-year Warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Blu-ray, DVD & CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection\n- Hassle-free installation, with no software CD required\n- Backed by a Star Tech.com 2 year warranty & free lifetime technical support Feature Feature Value Host interface IDEOutput interface SATAConnector (s)1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin) Internal Y Product colour Red Ro HS compliance Y Certification FCC, CEChipset Marvell
- 88SA8852 Data transfer rate (max)0.133 Gbit/s Logical block addressing (LBA) support 48 bit Operating temperature (T-T)5
- 50 &176;CStorage temperature (T-T)-25
- 80 &176;COperating relative humidity (H-H)15
- 90% Width 20 mm Depth 75.5 mm Height 23 mm Weight 15 g Package width 158 mm Package depth 218 mm Package height 47 mm Package weight 80 g




...

he FIRE96MF IEEE-1394 Fire Wire 800 to 400 Adapter features a (male) Fire Wire 800 connector on one end & a (female) Fire Wire 400 connector on the other end, providing a cost-effective solution for connecting your older Fire Wire 400 devices to your Fire Wire 800-enabled devices or Mac family of products. Supporting data transfer rates of up to 400 Mbps, the FIRE96MF is great for applications requiring large file transfers, delivering a high speed link that minimizes data transfer time (e.g. transferring digital video files from a DV camcorder to a computer, etc). Designed & constructed for both durability & convenience, the Fire Wire 800 to Fire Wire 400 Adapter (9-pin to 6-pin) is backed by Star Tech.com's lifetime warranty. ...

Only the best-quality components are used when Star Tech.com′s expert manufacturing team creates our cable supplies & this adapter is no different. Our IEEE-1394 Firewire 4-6 Adapter F/M is used to change a 4 pin Fire Wire connector into a 6 pin Fire Wire connector. Backed with a lifetime warranty, these cables help Star Tech.com maintain our tradition of offering top-notch parts & products for the best price possible. ...

Only the best-quality components are used when Star Tech.com′s expert manufacturing team creates our cable supplies & this adapter is no different. Our IEEE-1394 Firewire 4-6 Adapter M/F is used to change a 4 pin Fire Wire connector into a 6 pin Fire Wire connector. Backed with a lifetime warranty, these cables help Star Tech.com maintain our tradition of offering top-notch parts & products for the best price possible. ...

The IES51000POE 5-Port Gigabit Po E Switch with 4 PSE ports lets you connect Gigabit Ethernet & power to up to 4 Po E-enabled devices, or a mixture of Po E & non-Po E components. Giving you the freedom to place your equipment in locations where power outlets are not available, this compact Power over Ethernet switch complies with IEEE 802.3af standards & supplies up to 15.4 W per port, with a total power budget of 62W. A true unmanaged switching solution, the 4 PSE (Power Sourcing Equipment) ports sense whether the connected devices are Po E-ready or require data connectivity only, while all 5 ports auto-negotiate between 10/100/1000 Mbps network speed & duplex. The Gigabit Ethernet switch features a sturdy, wall-mountable metal enclosure for durability, & front panel LEDs for quick indication of connection speed & status. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage
- Power your devices without running electrical wiring with a full 15.4 W power per port
- Reduce expenses by using existing standard Cat 5/5e/6 Ethernet cabling to deliver power & data
- Provides durable performance in harsh environments with a sturdy steel construction


...

The IES8100POEGB 8-port 10/100 Mbps Power over Ethernet (Po E) Switch enables you to supply both power & data to up to 8 Po E-capable devices. The switch complies with 802.3af standards & supplies up to 15.4 W per port
- plenty of power for your Po E devices. A flexible solution giving you the freedom to place your equipment in locations where power outlets are not available, this compact Po E Switch features 8 auto-detecting full/half-duplex ports with automatic crossover detection (MDI/MDI-X). A sturdy metal enclosure provides durability in harsh industrial environments.
...