Join Two Stereo Audio Cables Together to Make a Longer Cable\n\n The GCAUD3535FF Audio Cable Adapter/ Audio Coupler features two 3.5mm audio female connectors, providing a cost-effective way to combine two standard 3.5mm stereo headphone cables or convert a standard audio cable into an extension cable.\n\n The F-F Audio Cable adapter is backed by Star Tech.com's Lifetime Warranty.\n\n The Star Tech.com Advantage\n\n- Gold plated connectors increase conductivity & help reduce corrosion\n- Backed by a Star Tech.com lifetime warranty & free technical support Feature Feature Value Connector 13.5mm Connector 23.5mm Connector gender Female connector / Female connector Product colour Black Housing material PVCWeight 11 g Package width 13 mm Package depth 88 mm Package height 119 mm ...

This Info Safe IDE/SATA external hard drive enclosure connects to a host computer through either USB (Universal Serial Bus) 2.0 or e SATA, delivering versatility & cost-effectiveness. The drive enclosure features a screwless snap-in design that saves installation time, & supports any standard 3.5in SATA or IDE hard drive (supports up to 1.5TB capacity hard drives)
- allowing you to customize your external storage solution based on your preference of hard drive model & manufacturer. Designed to provide a convenient & efficient operating experience, the enclosure features " One Touch Backup", which automates backup tasks, allowing you to backup files & folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included). To ensure a suitable operating environment for installed hard drives, the SATA/IDE enclosure features a built-in 80mm fan that re-distributes the heat build-up generated as a result of typical drive operation. This feature is especially important for larger volume storage (750GB, 1TB hard drives), & faster spinning" drives (i.e 7200 RPM), as it can help optimize drive operability & in turn preserve stored data integrity. The Star Tech.com Advantage -All-in-one external storage solution as compatible with IDE ATA133/66/100 & SATA I (SATA 150) SATA II (SATA 300) 3.5" Hard Drives. -Screw less design allows easy insertion of the IDE or SATA hard drive. -Supports Hard Drives up to 1.5 TB in size. Features -Constructed out of solid black aluminum for better durability, & combined with built in 80mm fan, helps to provide better heat dissipation & longer life. -Easily connect from PC or notebook to the HDD enclosure via USB (Universal Serial Bus) or e SATA. -
Includes: One Button Backup feature, usable with both IDE & SATA hard drives in USB (Universal Serial Bus) 2.0 mode. -Supports data transfer rate up to 3 Gb/s using e SATA.

...

This Black External Hard Drive Enclosure lets you install a 3.5in SATA hard drive for connection to a computer using USB (Universal Serial Bus) 2.0
- a cost-effective storage solution for a wide variety of applications including file & application sharing between desktop & laptop computers, data archiving, or simply backing up existing hard drives to preserve data security. Designed with modern computer systems in mind, the USB (Universal Serial Bus) 2.0 SATA hard drive enclosure is compatible with the IT industry's newest 3.5in SATA II (SATA 300) drives (up to 2 TB) & backward compatible with SATA /150 drives, & features a sleek, sturdy aluminum casing that looks terrific next to any MAC or PC system. The enclosure is compatible with a broad range of Windows operating systems, Mac OS 9.0 & up & Linux, as well as Apple's Mac OS X Leopard operating system
- including its breakthrough automatic " Time Machine" backup feature.

...

- Compliant with USB (Universal Serial Bus) Attached SCSI Protocol (UASP) Transport Specifications
- Light-weight & durable aluminum
...

The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II, SATA III-6 Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused 3.5in floppy drive bay. The mobile rack delivers quick & easy access to hard drive contents, using a convenient "no mounting required/easy eject" feature which eliminates the need for the drives to be installed in a tray
- a time-saving solution for instant drive removals & insertions, as part of a system building process or integration into rackmount systems or industrial environments. For added safety, the mobile rack is made from UL94 V-0 rated plastics & equipped with locking bay doors to help prevent accidental or unauthorized removal of the swappable hard drives. Also a perfect addition for operating system image deployment & any task that requires being able to access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important projects while maintaining a reliable storage solution.
...

Turn four SATA drives into an external storage device with USB (Universal Serial Bus) 2.0 & e SATA connectivity.
- Support for
...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well.\n\n Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.\n\n With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer.\n\n The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.\n\n\n Improved Performance with UASP\n UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.\n\n At the same peak in testing UASP also shows an 80% reduction in required processor resources.\n\n Testing results were obtained using an Intel&174; Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive.\n\n The Star Tech.com Advantage\n- 70% Faster than traditional USB (Universal Serial Bus) 3.0, with UASP Transfer Protocol\n- Maximum durability, with aluminum housing Feature Feature Value Storage drive size 3.5" Supported storage drive interfaces Serial ATA, Serial ATA II, Serial ATA IIINumber of storage drives supported 1 Hot-swap Y Maximum storage capacity 4 TBUSB connectivity YUSB version 3.0 (3.1 Gen 1)USB connector type USB Type-BUSB connector gender Female USB ports quantity 1 Product type HDD enclosure Product colour Black Material Aluminium, Plastic LED indicators Activity, Power Ro HS compliance Y Data transfer rate 5 Gbit/s Chipset ASMedia
- ASM1053 E Plug & Play Y External power adapter Y Compatible power plug types EU, UK, USAC adapter input voltage 100
- 240 VAC adapter input current 0.6 AAC adapter output voltage 12 VAC adapter output current 2 AWindows operating systems supported Y Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 65 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 95% Width 31.4 mm Depth 191.5 mm Height 115.4 mm Weight 317 g Package width 132 mm Package depth 107 mm Package height 107 mm Package weight 800 g AC adapter included Y Cables included USBStand included Y Screws included Y Manual Y





...

Connect a CF card to a computer through an IDE connector\n This Compact Flash IDE adapter is a perfect solution for accessing Compact Flash (CF I, CF II) & IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection. Designed & constructed to provide a reliable media card platform, the CF IDE adapter is backed by Star Tech.com''s 2-year warranty.\n The Star Tech.com Advantage\n- Quick & driver free installation into any IDE 40 pin & 44 pin slot\n- Easily swap cards in & out with built-in push button ejector Feature Feature Value Host interface IDEOutput interface CFInternal Y Ro HS compliance Y Data transfer rate (max)0.133 Gbit/s Operating temperature (T-T)-55
- 85 &176;CStorage temperature (T-T)-55
- 85 &176;COperating relative humidity (H-H)5
- 85% Width 97 mm Depth 100 mm Height 25 mm Weight 145 g User guide Y Package width 48 mm Package depth 220 mm Package height 158 mm


...