The QSW-M408-4C is a Layer 2 Web Managed Switch equipped with four 10 Gb E SFP+/RJ45 combo ports & eight Gigabit ports. Supporting Layer 2 switching & network management via a user-friendly web user interface, the QSW-M408-4C offers flexible deployment in hybrid high-speed network environments & provides an entry-level network management solution that is usable even by non-IT professionals. The QSW-M408-4C is compatible with 10 Gb E & NBASE-T technologies that supports up to five speeds (10G / 5G / 2.5G / 1G / 100M) to provide higher transmission speeds with existing Cat 5e & 6a cables. With its high performance, user-friendly management features & desktop size, the QSW-M408-4C means that you can instantly upgrade to a hybrid high-speed network environment at a cost-effective price, while optimizing network bandwidth & ensuring network maintenance security.\n\n Flexible deployment with multiple 10G SFP+ fiber & Gigabit ports\n The QSW-M408-4C provides four 10 Gb E SFP+/RJ45 combo ports & eight Gigabit ports for connecting various devices & enabling hybrid high-speed networks. With SFP+ interfaces, direct attach copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6, 5 or 5e cabling. The switching capacity of QSW-M408-4C is 96 Gbps, guaranteeing the full potential of each port.\n\n QSS: Intuitive Network Management Software with Web GUI\n The QSW-M408-4C uses the QNAP Switch System (QSS), which features an easy-to-use Web GUI with value-added functions to simplify network set up & management.\n\n Sleek Design\n Use the at-a-glance major functions, flat control layers & one-click login to simplify set up & management.\n\n GUI\n The visual illustration matches physical ports for greater usability.\n\nvalue-added Functions\n With the setting guide, status chart reference, online firmware update, the learning & management costs are greatly reduced.\n\n QSS: The human-centered setting guide\n QNAP Switch System (QSS) provides an overview dashboard, port management & setting guide to help administrators control Layer 2 networks.\n\n Optimize Network Performance with bandwidth & packet control\n The QSW-M408-4C provides bandwidth & packet control functions (such as LACP, VLAN, Qo S, & IGMP Snooping) for boosting network performance through IP grouping & bandwidth management.\n\n Powerful security & system functions\n The QSW-M408-4C has powerful security & system functions (including ACL, LLDP, RSTP & Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention & avoiding packet loss.\n\n Faster speeds using existing cables with 10GBASE-T & NBASE-T\n The QSW-M408-4C is compatible with 10 Gb E & NBASE-T technologies to support up to five speeds (10G / 5G / 2.5G / 1G / 100M). The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable types & their lengths, different speeds can be achieved for faster, more efficient data transfer.\n\n Improve team productivity with a 5 Gb E/ 10 Gb E High-Speed Network\n From NAS with built-in 10 Gb E SFP+ & 10GBASE-T ports, or NAS with PCIe slots that support 10 Gb E/5 Gb E/2.5 Gb E network adapters, QNAP has led the industry in 10 Gb E adoption. Other high-speed network solutions from QNAP include Thunderbolt 3 to 10 Gb E Network Adapters & USB (Universal Serial Bus) 3.2 Gen 1 to 5 Gb E Network Adapters. These can all be used with the QSW-M408-4C to create a comprehensive high-speed network environment for boosting the performance of photo/video editing, virtualization, large-file data transfers, & other bandwidth-demanding tasks.\n\n Desktop size for easy use in offices\n With a compact & modern design, the QSW-M408-4C fits perfectly alongside other devices in modern digital offices. Featuring a delicate white or textured surface design, the QSW-M408-4C helps users to easily identify each port. The flexible DC power connector also assists in universally deploying the QSW-M408-4C. Being fully plug-&-play, simply connect the QSW-M408-4C to your devices & it will do the rest.\n\n\n\n\n\n Product Model: QSW-M408-4C\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_79252763_1589200789_7456_29079.pdf\n\n ...

The QSW-M804-4C is a Layer 2 Web Managed Switch with four 10 Gb E SFP+ ports & four 10 Gb E SFP+/RJ45 combo ports that enables blazing-fast transfer speeds, simultaneous multi-workstation access to large files (ideal for video editing & multimedia), & empowers bandwidth-demanding tasks like virtualization. Supporting Layer 2 switching & providing a user-friendly entry-level network management solution, the QSW-M804-4C is an affordable way for businesses & organizations to fully embrace 10 Gb E connectivity.\n\n Flexible deployment combo ports & 10 Gb E / NBASE-T\n The 8-port QSW-M804-4C switch

Includes:: four SFP+ (fiber) ports, & four SFP+/RJ45 (copper) combo ports for connecting different interfaces. With RJ45 interfaces, 10 Gb E is supported using Cat 6a (or above) cables. Direct Attach Copper (DAC) cables can be used with SFP+ ports for connecting to servers inside a rack. The switching capacity of the QSW-M804-4C is 240 Gbps, guaranteeing the full potential of each port. The QSW-M804-4C is also compatible with 10 Gb E & NBASE-T technologies to support up to five speeds (10G / 5G / 2.5G / 1G / 100M). The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable types & their lengths, different speeds can be achieved for faster, more efficient data transfer.\n\n Fully embrace High-Speed Networking with QNAP!\n From NAS with built-in 10 Gb E SFP+ & 10GBASE-T ports, or NAS with PCIe slots that support 10 Gb E network adapters, QNAP has led the industry in 10 Gb E adoption. Other high-speed network solutions from QNAP include Thunderbolt 3 to 10 Gb E Network Adapters & USB (Universal Serial Bus) 3.2 Gen 1 to 5 Gb E Network Adapters. These can all be used with the QSW-M804-4C to create a comprehensive high-speed network environment for boosting the performance of photo/video editing, virtualization, large-file data transfers, & other bandwidth-demanding tasks.\n\n QSS: Intuitive Network Management Software\n The QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up & management.\n\n Sleek Design\n Use the at-a-glance major functions, flat control layers & one-click login to simplify set up & management.\n\n GUI\n The visual illustration matches physical ports for greater usability.\n\nvalue-added\n With the settings guide, status chart reference, online firmware update, learning & management costs are greatly reduced.\n\n Optimize Network Performance with bandwidth & packet control\n The QSW-M804-4C provides bandwidth & packet control functions (such as LACP, VLAN, Qo S, & IGMP Snooping) to boost network performance through IP grouping & bandwidth management.\n\n Powerful security & system functions\n The QSW-M804-4C has powerful security & system functions (including ACL, LLDP, RSTP & Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention & avoiding packet loss.\n\n Near-silent & energy saving\n With its smart cooling system, the QSW-M804-4C ensures high-speed network performance without distracting background noise. IEEE 802.3az (EEE) support also reduces power consumption without sacrificing performance or functionality. By dynamically detecting link speeds & activities & adjusting accordingly, the QSW-M804-4C provides energy savings of up to 50% to minimize operational costs.\n\n Versatile installation & sleek appearance\n The QSW-M804-4C features a sleek modern design that blends in with modern digital homes & offices. A Rackmount Kit is included to provide extra installation options.\n\n\n\n\n\n Product Model: QSW-M804-4C\n\n\n

...

The QSW-M804-4C is a Layer 2 Web Managed Switch with four 10 Gb E SFP+ ports & four 10 Gb E SFP+/RJ45 combo ports that enables blazing-fast transfer speeds, simultaneous multi-workstation access to large files (ideal for video editing & multimedia), & empowers bandwidth-demanding tasks like virtualization. Supporting Layer 2 switching & providing a user-friendly entry-level network management solution, the QSW-M804-4C is an affordable way for businesses & organizations to fully embrace 10 Gb E connectivity.\n\n Flexible deployment combo ports & 10 Gb E / NBASE-T\n The 8-port QSW-M804-4C switch

Includes:: four SFP+ (fiber) ports, & four SFP+/RJ45 (copper) combo ports for connecting different interfaces. With RJ45 interfaces, 10 Gb E is supported using Cat 6a (or above) cables. Direct Attach Copper (DAC) cables can be used with SFP+ ports for connecting to servers inside a rack. The switching capacity of the QSW-M804-4C is 240 Gbps, guaranteeing the full potential of each port. The QSW-M804-4C is also compatible with 10 Gb E & NBASE-T technologies to support up to five speeds (10G / 5G / 2.5G / 1G / 100M). The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable types & their lengths, different speeds can be achieved for faster, more efficient data transfer.\n\n Fully embrace High-Speed Networking with QNAP!\n From NAS with built-in 10 Gb E SFP+ & 10GBASE-T ports, or NAS with PCIe slots that support 10 Gb E network adapters, QNAP has led the industry in 10 Gb E adoption. Other high-speed network solutions from QNAP include Thunderbolt 3 to 10 Gb E Network Adapters & USB (Universal Serial Bus) 3.2 Gen 1 to 5 Gb E Network Adapters. These can all be used with the QSW-M804-4C to create a comprehensive high-speed network environment for boosting the performance of photo/video editing, virtualization, large-file data transfers, & other bandwidth-demanding tasks.\n\n QSS: Intuitive Network Management Software\n The QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up & management.\n\n Sleek Design\n Use the at-a-glance major functions, flat control layers & one-click login to simplify set up & management.\n\n GUI\n The visual illustration matches physical ports for greater usability.\n\nvalue-added\n With the settings guide, status chart reference, online firmware update, learning & management costs are greatly reduced.\n\n Optimize Network Performance with bandwidth & packet control\n The QSW-M804-4C provides bandwidth & packet control functions (such as LACP, VLAN, Qo S, & IGMP Snooping) to boost network performance through IP grouping & bandwidth management.\n\n Powerful security & system functions\n The QSW-M804-4C has powerful security & system functions (including ACL, LLDP, RSTP & Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention & avoiding packet loss.\n\n Near-silent & energy saving\n With its smart cooling system, the QSW-M804-4C ensures high-speed network performance without distracting background noise. IEEE 802.3az (EEE) support also reduces power consumption without sacrificing performance or functionality. By dynamically detecting link speeds & activities & adjusting accordingly, the QSW-M804-4C provides energy savings of up to 50% to minimize operational costs.\n\n Versatile installation & sleek appearance\n The QSW-M804-4C features a sleek modern design that blends in with modern digital homes & offices. A Rackmount Kit is included to provide extra installation options.\n\n\n\n\n\n Product Model: QSW-M804-4C\n\n\n

...

The QVP-41A QVR Pro appliance is a tower-based network surveillance server that supports real-time video/audio monitoring, high-resolution recording, & playback from multiple IP cameras. Users can easily monitor cameras from different platforms (Windows. Mac & mobile devices), making it easier for businesses, offices, & home users to safeguard their property & possessions. QVP-41A vs. other NAS-based surveillance systems. What&153;s the difference? In a conventional NAS-based surveillance system, surveillance is just one of many applications available to users. As all these applications need to share NAS system resources & storage space, surveillance performance could be impacted. The QVP-41A QVR Pro Appliance overcomes this by providing dedicated storage space & reserving full system resources for surveillance, delivering the utmost performance to fulfill professional surveillance system requirements. The QVP-41A also comes with built-in camera channel licenses & essential applications to enable local installation without requiring an internet connection. Simply install the hard drives & power up the QVP-41A to start the installation process. Comprehensive camera support & management The QVP-41A supports thousands of camera models from over 150 brands with a variety of image formats (including cameras that use ONVIF & RTSP/ HTTP streaming). Even USB (Universal Serial Bus) webcams are supported, allowing home & budget-conscious users to quickly build surveillance solutions tailored to their environment while providing convenient camera management. Motion detection using budget-friendly USB (Universal Serial Bus) webcams Standard surveillance systems normally only support event recording & notification functions for expensive cameras with integrated motion detection. The QVP-41A provides motion detection even for entry-level cameras & USB (Universal Serial Bus) webcams. As long as your camera can stream its footage to the QVR Pro appliance (e.g. through RTSP protocol) it supports motion detection, allowing you to build a budget-friendly, motion-detecting surveillance system. QVR Pro Client The QVR Pro Client software can be installed on Windows&174; & Mac&174; devices, allowing you to monitor from different platforms & flexibly switch from live view or playback mode to take full control over monitored areas. Live view & playback Monitor the live view of multiple channels & play recordings on a single interface. You can also view recordings at a specific time by clicking the timeline or by defining a time range. Region of Interest The Region of Interest (ROI) feature allows for viewing multiple regional images from the same camera in live view & playback mode. You can define & enlarge multiple areas to watch the area more closely. Qdewarp Technology The innovative Qdewarp enables users to view standard fisheye camera recordings in proportional ratios & sizes without affecting original recordings. The distorted parts on the edges can be turned into a clear panoramic view. Multiple Notification Methods The event notification provides multiple ways of being informed of emerging events, including flashing red borders of channels, alert buzzers, & the motion icon on the e-map. Easy remote monitoring with the QVR Pro Client mobile app The QVR Pro Client mobile app means that you can remotely monitor multiple channels simultaneously. If your network connection is slow or metered/capped, you can choose the low-bandwidth mode to view a bandwidth-optimized stream without affecting the quality of recordings. In addition, you can remotely set the camera&153;s preset point or control the PTZ cameras within the app.\n\n\n\n Storage Online RAID migration Yes Online RAID expansion Yes Storage drives installed No Installed storage drive type No Supported storage drive types HDD & SSDNumber of storage drives supported 4 Hot-swap drive bays Yes RAID support Yes Supported file systemsext 4RAID levels 1, 5, 6, 10, JBODSupported storage drive interfaces M.2, Serial ATA II, Serial ATA IIIStorage drive sizes supported 2.5, 3.5" Number of M.2 (M & B) slots 2 Processor Processor manufacturer Intel CPU configuration (max)1 Configurable TDP-down frequency 2.1 GHz Bus type DMI3 Processor frequency 3.1 GHz Processor family Intel&174; Pentium&174; Processor model G5400 T Processor cores 2 Memory Internal memory type DDR4 Internal memory 8 GBMaximum RAM supported 32 GBMemory slots 2 Flash memory 5000 MBMemory form factor SO-DIMMNetwork Ethernet LANYes Ethernet LAN data rates 1000 Mbit/s Wake-on-LAN ready Yes Supported network protocols HTTP, HTTPS, TCP/IP, UDP, DHCP, Static IP, DNS, DDNS, UPn P, FTP, NTP, & SMTPDHCP server Yes Ports & interfaces USB port Yes USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 1HDMI version 2.0PCI Express x 4 (Gen 3.x) slots 1 Audio in/out Yes HDMI ports quantity 1 Ethernet LAN (RJ-45) ports 2USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity 2USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity 2 Hard drive RAID support Yes Supported file systemsext 4RAID levels 1, 5, 6, 10, JBODDesign Number of built-in speakers 1 Built-in speaker (s) Yes Fan diameter 26 cm Cooling type Active Fan diameter 12 cm Built-in display Yes Display type LCDProduct colour Black Number of fans 3 fan (s)LED indicators HDD, LAN, Status, USBChassis type Tower Technical details Type NASDevice class Small & Medium Business Backup function Yes Backup features Cloud Built-in display Yes Display type LCDProduct colour Black Noise level 21.2 d BLED indicators HDD, LAN, Status, USBChassis type Tower Buzzer Yes Number of fans 3 fan (s) Performance System log Yes S.M.A.R.T. support Yes Hot spare Yes Type NASDevice class Small & Medium Business Backup function Yes Backup features Cloud On/off switch Yes Web-based management Yes Security algorithms HTTPS, SSHReset button Yes Noise level 21.2 d B Buzzer Yes USB copy function Yes Cooling Cooling type Active Fan diameter 12 cm Number of fans 3 fan (s) Security Security algorithms HTTPS, SSHManagement features On/off switch Yes Web-based management Yes Reset button Yes Power Power supply location Built-in Power supply unit (PSU) capacity 250 WAC input voltage 100-240 VPower consumption (typical)37.32 WPower consumption (sleep)24.14 WNumber of power supply units 1 Weight & dimensions Width 199.3 mm Depth 279.6 mm Height 188.2 mm Weight 5.4kg Package weight 7.01kg Packaging content Number of screws 28 Cables included AC, LAN (RJ-45) Power cables quantity 1 Processor special features Intel VT-x with Extended Page Tables (EPT) Yes Intel Virtualization Technology for Directed I/O (VT-d) Yes Intel Virtualization Technology (VT-x) Yes Intel TSX-NI version 0.00 Intel TSX-NINo Intel Trusted Execution Technology No Intel Stable Image Platform Program (SIPP) version 0.00 Intel Stable Image Platform Program (SIPP) No Intel Secure Key Technology version 1.00 Intel Identity Protection Technology version 1.00 Intel Enhanced Halt State Yes Intel Clear Video Technology Yes Intel 64 Yes Idle States Yes Execute Disable Bit Yes Enhanced Intel Speed Step Technology Yes Embedded options available Yes Operational conditions Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)5
- 95% Packaging data Package weight 7.01kg Cables included AC, LAN (RJ-45)\n\n\n\n

...

The QWA-AC2600 is a 2.4/5 GHz Dual Band Dual Concurrent (DBDC), 4 x 4 Multi-user MIMO (MU-MIMO), low-profile PCI Express (PCIe) 2.0 x 1 wireless adapter with two Qualcomm QCA9984 NICs that supports up to 2533 Mbps (800 Mbps for IEEE 802.11n (2.4 GHz) & 1733 Mbps for IEEE 802.11ac (5 GHz)). The QWA-AC2600 can be used as an access point or a base station with Ubuntu/ Linux PCs or QNAP NAS. Combining the higher compatibility of 802.11n & faster connection of 802.11ac, the QWA-AC2600 enables versatile applications including wireless LANs in the workplace & Internet of Things (Io T) deployment in the field.nn A tailor-made private wireless network that meets your needsn The QWA-AC2600 is compatible with most PCIe-enabled QNAP NAS*. When used with the Wireless AP Station app your NAS will evolve into a high-performance wireless access point that can be connected to from multiple devices. The QWA-AC2600 can also be used to extend your wireless network coverage. Combined with useful features (including DHCP & NAT) provided by the Network & Virtual Switch app, the QWA-AC2600 can be used for a variety of applications, delivering private, fast, low-latency & secure connectivity across your home and/or workplace.nn Turn your Ubuntu/ Linux PC or QNAP NAS into a wireless access point/base stationn The QWA-AC2600 can turn your Ubuntu/ Linux PC or QNAP NAS into a wireless access point/base station for other wireless devices to directly access data stored on it. The QWA-AC2600's 2.4/5 GHz DBDC design can be configured to utilize two wireless networks for boosting performance. For a single Ubuntu/ Linux PC or QNAP NAS, multiple sets of QWA-AC2600 can be installed to enable a more flexible deployment & expansion for wireless network applications which require security, privacy & high performance.\n\n\n\n Product ID: QWA-AC2600\n\n\n\n\n\n Model: QWA-AC2600\n\n Datasheet: http://objects.icecat.biz/objects/mmo_55231988_1527784123_7676_11927.pdf\n\n\n\n\n\n Product Video: https://youtu.be/h K Lfq RRPY3c\n\n\n\n\n\n ...

The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10 Gb E network expansion card with an Intel Ethernet Controller X710 & supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20 Gbps transfer speeds for accelerating file sharing & intensive data transfer. With SR-IOV & i SCSI support, the QXG-10G2T-X710 greatly boosts network efficiency & is ideal for I/O-intensive & latency-sensitive virtualization applications & data centers.\n\n Build a 10 Gb E Network Environment\n The QXG-10G2T-X710 can be used with QNAP&153;s 10 Gb E switches, such as the QSW-M2108-2C or QSW-1208-8C, for you to build a budget-friendly high-speed network environment.\n\n Supports SR-IOV & i SCSI, Achieve the Best Virtualization Environment\n The QXG-10G2T-X710 supports SR-IOV, which can allocate bandwidth resources from a physical network card directly to VMs. It ensures reliable VM applications & reduced CPU overheads. The QXG-10G2T-X710 also supports i SCSI, which enables computers, servers, or virtual machines to use storage from your QNAP NAS as virtual disks. You can partition, format, & use these virtual disks exactly like local disks, or even use them for storage expansion or as backup destinations.\n\n Supports Windows & Linux servers/workstations\n Besides QNAP devices, the QXG-10G2T-X710 supports Windows&174; 10, Windows Server&174;, & Linux (driver required), allowing you to attain optimal business performance for a wider range of system applications & services.\n\n\n\n\n\n Product Model: QXG-10G2T-X710\n\n\n ...

The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10 Gb E network expansion card with an Intel Ethernet Controller X710 & supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20 Gbps transfer speeds for accelerating file sharing & intensive data transfer. With SR-IOV & i SCSI support, the QXG-10G2T-X710 greatly boosts network efficiency & is ideal for I/O-intensive & latency-sensitive virtualization applications & data centers.\n\n Build a 10 Gb E Network Environment\n The QXG-10G2T-X710 can be used with QNAP&153;s 10 Gb E switches, such as the QSW-M2108-2C or QSW-1208-8C, for you to build a budget-friendly high-speed network environment.\n\n Supports SR-IOV & i SCSI, Achieve the Best Virtualization Environment\n The QXG-10G2T-X710 supports SR-IOV, which can allocate bandwidth resources from a physical network card directly to VMs. It ensures reliable VM applications & reduced CPU overheads. The QXG-10G2T-X710 also supports i SCSI, which enables computers, servers, or virtual machines to use storage from your QNAP NAS as virtual disks. You can partition, format, & use these virtual disks exactly like local disks, or even use them for storage expansion or as backup destinations.\n\n Supports Windows & Linux servers/workstations\n Besides QNAP devices, the QXG-10G2T-X710 supports Windows&174; 10, Windows Server&174;, & Linux (driver required), allowing you to attain optimal business performance for a wider range of system applications & services.\n\n\n\n\n\n Product Model: QXG-10G2T-X710\n\n\n ...

The QNAP QXG-10G2TB is a PCIe Gen 3 (compatible with PCIe Gen 2) 10 Gb E network expansion card with a Marvell&174; AQtion Controller AQC113C that supports up to five speeds (10 Gb E / 5 Gb E / 2.5 Gb E / 1 Gb E / 100 Mb E). The QXG-10G2TB achieves up to 10 Gbps transfer speeds, accelerating file sharing & intensive data transfer. Highly energy efficient & cost-effective, the QXG-10G2TB provides a high-performance entry-level 10 Gb E solution.\n\n Build a 10 Gb E Network Environment\n Use the QXG-10G2TB with QNAP&153;s 10 Gb E switches to build budget-friendly high-speed network environments.\n\n\n\n\n\n\n\n Model: QXG-10G2TB\n\n\n\n\n\n\n\n ...

QNAP QXP-1620S-B3616W. Host interface: PCI Express, Output interface: Mini-SAS, Expansion card standard: PCIe 3.0. Cooling type: Active, Number of fans: 1 fan (s). Data transfer rate (max): 12 Gbit/s. Connectivity technology: Wired, Interface: Fiber\n\n\n\n\n\n Product Model: QXP-1620S-B3616W\n\n\n ...

QNAP QXP-1620S-B3616W. Host interface: PCI Express, Output interface: Mini-SAS, Expansion card standard: PCIe 3.0. Cooling type: Active, Number of fans: 1 fan (s). Data transfer rate (max): 12 Gbit/s. Connectivity technology: Wired, Interface: Fiber\n\n\n\n\n\n Product Model: QXP-1620S-B3616W\n\n\n ...