Extend the range of a Po E connection! n n The Intellinet Network Solutions 1-Port Gigabit High-Power Po E+ Extender Repeater, Model 560962, is designed to extend connection distances from a Po E source to an output device another 100 m (328 ft.) via Cat 5e or Cat 6 cable. You can cover even longer distances by cascading these extenders on a network. The Po E+ extender does not need any additional power supply, as it draws the power it needs from the Po E input. n n Simple Installation n Simply connect the "" Po E In"" port with your Po E injector or Po E switch, & connect the "" Po E Out"" with the Po E device that you wish to connect; e.g., a Vo IP phone or a Po E network camera. That's it. There is nothing to configure. It simply could not be any easier. n n Reduce Wiring Costs n No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Extender to the LAN switch port & use the existing Cat 5 cabling to deliver DC power as well as transfer data. n n Power over Ethernet 802.3at Compliant n The Intellinet Network Solutions 1-Port Gigabit High-Power Po E+ Extender Repeater supports the IEEE 802.3at protocol & is designed to forward data at Gigabit speeds & up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.). n n Cascading Power n You can daisy-chain multiple of the Po E extenders to increase the transmission distance even further. For each Po E extender added, you lose about 4 watts of usable PD power, but if you start with a Po E injector that outputs 30 watts of IEEE 802.3at power
- for example, the Intellinet Network Solutions Po E injector (Model 560566)
- then you still have 8.6 watts for your Po E device, 5 Po E extenders down the line & 600 meters (1968 ft.) away.\n\n\n\n Product ID: 560962\n\n\n\n\n\n Model: Gigabit High-Power Po E+ Extender Repeater, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E), metal\n\n\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_29228562_1545385333_7403_20954.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_29228562_1545385318_1218_19935.pdf\n\n\n\n\n\n\n\n

...

Extend the range of a Po E connection! n n The Intellinet Network Solutions 1-Port Gigabit High-Power Po E+ Extender Repeater, Model 560962, is designed to extend connection distances from a Po E source to an output device another 100 m (328 ft.) via Cat 5e or Cat 6 cable. You can cover even longer distances by cascading these extenders on a network. The Po E+ extender does not need any additional power supply, as it draws the power it needs from the Po E input. n n Simple Installation n Simply connect the "" Po E In"" port with your Po E injector or Po E switch, & connect the "" Po E Out"" with the Po E device that you wish to connect; e.g., a Vo IP phone or a Po E network camera. That's it. There is nothing to configure. It simply could not be any easier. n n Reduce Wiring Costs n No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Extender to the LAN switch port & use the existing Cat 5 cabling to deliver DC power as well as transfer data. n n Power over Ethernet 802.3at Compliant n The Intellinet Network Solutions 1-Port Gigabit High-Power Po E+ Extender Repeater supports the IEEE 802.3at protocol & is designed to forward data at Gigabit speeds & up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.). n n Cascading Power n You can daisy-chain multiple of the Po E extenders to increase the transmission distance even further. For each Po E extender added, you lose about 4 watts of usable PD power, but if you start with a Po E injector that outputs 30 watts of IEEE 802.3at power
- for example, the Intellinet Network Solutions Po E injector (Model 560566)
- then you still have 8.6 watts for your Po E device, 5 Po E extenders down the line & 600 meters (1968 ft.) away.\n\n\n\n Product ID: 560962\n\n\n\n\n\n Model: Gigabit High-Power Po E+ Extender Repeater, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E), metal\n\n\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_29228562_1545385333_7403_20954.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_29228562_1545385318_1218_19935.pdf\n\n\n\n\n\n\n\n

...

Reduce costs by using existing Cat 5 cable to provide both power & data. n n The Intellinet Network Solutions 1-Port Gigabit High-Power Po E+ Injector means that you can connect your IEEE 802.3af/at-compliant products to a non-Po E LAN switch port. The Po E Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry Po E devices. n n Reduce Wiring Costs n No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Injector to the LAN switch port, & use the existing Cat 5 cabling to deliver DC power as well as transfer data. n n Protect Your Equipment n Now that you are running DC power to your networked equipment through the Cat 5e/6 cabling, you need to be sure that the products are protected from power problems. The Po E Injector was designed to protect equipment from short circuits (short GRND), current overloads & high voltages.\n\n\n\n Product ID: 560566-UK\n\n\n\n\n\n Model: Gigabit High-Power Po E+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E) (UK 3-pin plug)\n\n\n\n\n\n\n\n Product Video: https://youtu.be/l R-jb Duyxqc\n\n\n\n\n\n ...

The Gigabit PCI Express Network Card is a high-performance network adapter. It supports the PCI Express bus architecture, which provides faster throughput than the current 32- & 64-bit PCI bus architectures. & there is no need to switch to fibre optic cable
- The Intellinet Network Solutions Gigabit PCI Express Network Card means that you can run Gigabit speeds over your existing copper wire network cable. n n Faster Throughput n The PCI Express host interface supports throughput rates of up to 2 Gbps when running in full duplex mode, ideal for resource-intensive CAD/CAM, client-server database, multimedia, pre-press, advertising graphics, server & mission-critical applications. n n Auto-Negotiation n The Gigabit PCI Express Network Card will automatically detect the network speed that the LAN switch port is set to & run at the same speed. The card supports 10 Base-T Ethernet, 100 Base-TX Fast Ethernet & 1000 Base-T Gigabit Ethernet. n n Full Duplex n When running in full duplex mode, the Gigabit PCI Express Network Card provides the following throughput rates: 20 Mbps (10 Base-T Ethernet), 200 Mbps (100 Base-TX Fast Ethernet) & 2 Gbps (1000 Base-T Gigabit Ethernet). n n Built-In Diagnostics n The Gigabit PCI Express Network Card comes standard with crossover detection & auto correction capabilities that make installation & maintenance a snap. n n Remote Power On n The Wake-On-LAN feature means that you can power on your desktop PC from anywhere on the network.\n\n\n\n Product ID: 522533\n\n\n\n\n\n Model: Gigabit PCI Express Network Card, 10/100/1000 Mbps PCI Express RJ45 Ethernet Card\n\n\n\n\n\n\n\n\n\n\n\n\n\n
...

Turn a SFP transceiver module slot into a 10/100/1000 Mbps RJ45 copper Ethernet port! _x 000D_n _x 000D_n The Intellinet Network Solutions Gigabit RJ45 Copper SFP Optical Transceiver Module is built to comply with the MSA (Multi-Source Agreement) standards & offers a cost-effective way to add a Gigabit copper Ethernet port to your SFP enabled network switch. _x 000D_n _x 000D_n Compatibility _x 000D_n Compatibility in your network is everything, & the Intellinet Network Solutions SFP Transceiver Module (model 523882) delivers. Use it with any Intellinet Network Solutions SFP equipped network switch or any other MSA compliant SFP enabled switch. & since the Intellinet Network Solutions SFP transceiver module is set to broadcast the vendor pn GLC-T, compatibility to your Cisco gear is provided. _x 000D_n _x 000D_n Hot-Pluggable _x 000D_n The Intellinet Network Solutions Gigabit RJ45 Copper SFP Optical Transceiver Module (model 523882) is fully hot-pluggable, & that means that you can install the module without rebooting your network switch for uninterrupted network traffic.\n\n\n\n Product ID: 523882\n\n\n\n\n\n Model: Gigabit RJ45 Copper SFP Optical Transceiver Module, 1000 Base-T (RJ-45) port, 100m\n\n Datasheet: http://objects.icecat.biz/objects/mmo_32584388_1468486183_431_32603.pdf\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_32584388_1545385221_7839_2777.pdf\n\n\n\n\n\n\n\n\n\n ...

NAME?\n\n\n\n Product ID: 712187\n\n\n\n\n\n Model: Grounding Kit, 300mm Length\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

NAME?\n\n\n\n Product ID: 712187\n\n\n\n\n\n Model: Grounding Kit, 300mm Length\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Get power & data over your existing LAN cable._x 000D_n_x 000D_n The Intellinet Network Solutions Industrial Gigabit High-Power Po E+ Injector connects your IEEE 802.3af/at-compliant products to a non-Po E LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common Po E devices._x 000D_n_x 000D_n Reduce Wiring Costs_x 000D_n_x 000D_n This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Injector to the LAN switch port, & use the existing LAN cabling to deliver DC power as well as transfer data.\n\n\n\n Product ID: 561365\n\n\n\n\n\n Model: Industrial Gigabit High-Power Po E+ Injector, 1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E), Metal Housing\n\n Datasheet: http://objects.icecat.biz/objects/mmo_62352425_1566373334_4347_19091.pdf\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_62352425_1566373380_0894_20206.pdf\n\n\n\n\n\n\n\n ...

Get power & data over your existing LAN cable._x 000D_n_x 000D_n The Intellinet Network Solutions Industrial Gigabit High-Power Po E+ Injector connects your IEEE 802.3af/at-compliant products to a non-Po E LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common Po E devices._x 000D_n_x 000D_n Reduce Wiring Costs_x 000D_n_x 000D_n This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Injector to the LAN switch port, & use the existing LAN cabling to deliver DC power as well as transfer data.\n\n\n\n Product ID: 561365\n\n\n\n\n\n Model: Industrial Gigabit High-Power Po E+ Injector, 1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E), Metal Housing\n\n Datasheet: http://objects.icecat.biz/objects/mmo_62352425_1566373334_4347_19091.pdf\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_62352425_1566373380_0894_20206.pdf\n\n\n\n\n\n\n\n ...

'- Used to extend the length of shielded Cat 5e cables;n- 50 micron gold plated contacts;n- For use with shielded twisted pair (FTP) Cat 5e cable;n- Cat 5e performance is in compliance with ANSI/TIA/EIA 568 B.2 standard.\n\n\n\n Product ID: 504768\n\n\n\n\n\n Model: Inline Coupler, Cat 5e, FTP, Modular, 8P8C Female to 8P8C Female, Silver\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...