The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The Po E-capable DGS-1510-28P & DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections & Po E support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) & Small-Medium Business (SMB) environments.\n\n 10G SFP+ Stacking/ Uplink Ports\n\n The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver 1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure & manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks & servers while still maintaining fast data transfer rates.\n\n Layer 3 Traffic Management\n\n The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs & increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable & efficient network. \n\n Extensive Layer 2 Features\n\n The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection automatically detects & shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can determine cable quality & can quickly discover sections of cabling that need to be replaced.\n\n Traffic Classification & Qo S\n\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data & surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware & infrastructure. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.\n\n Keep Your Network Secure\n\n D-Link&153;s innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC & web-based access control. This gives network administrators multiple authentication options, reducing deployment times & removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users&153; traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.\n\n I Pv 6 Ready\n\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 security features, & IPv 6 Quality of Service (Qo S), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv 4/v 6 dual stack functionality, which allows the switches to act as a bridge between IPv 4 & IPv 6 networks.\n 1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top & bottom switches will also be considered occupied by the switch & cannot be used for any other purpose. Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Traffic classification Y System event log Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+ Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TCable types supported Cat 5, Cat 5e Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address auto-learning supported YVLAN support Y Virtual LAN features Tagged VLAN, Protocol-based VLANNumber of VLANs 4094MAC address table 16384 entries Switching capacity 128 Gbit/s Throughput 95.24 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 1.5 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YAccess Control List (ACL) rules 768IGMP snooping Y Security algorithms 802.1x RADIUS, EAP, SNMP, SSH, SSH-2, SSL/TLSSSH/SSL support YBPDU filtering/protection Y Authentication MAC-based authentication, Port-based authentication Multicast support Y Stackable Y Product colour Black, Grey LED indicators Activity, Link, Po E, Power, Speed Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCPhysical stacking (units)6 Virtual stacking (units)32 Noise level 56.9 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)436.3 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) power per port 30 WTotal Power over Ethernet (Po E) budget 370 WOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 1487.78 BTU/h Width 440 mm Depth 308 mm Height 44 mm Weight 4.25kg





...

Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...

Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...

Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...

Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...

The DGS-1520 Series, a new generation of Lite Layer 3 Stackable Smart Managed Switches,

Includes:: four 10

...

The DGS-2000 Series provide a diverse range of Gigabit port densities to accommodate various needs of enterprise access layer connectivity. With options such as Po E to conveniently power edge devices, SFP ports to extend network connectivity, advanced Layer 2 functionalities, & Layer 3 Lite manageability, the DGS-2000 Series is the ideal choice for any enterprise access layer deployment.\n\n Ultra High Availability\n For mission critical environments, the DGS-2000 series supports IGMP snooping, port mirroring, Spanning Tree Protocol (STP), & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers.\n Network maintenance features include loopback detection & cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting & terminating switching loops.\n The cable diagnostics feature, designed primarily for administrators & customer service representatives, determines the cable quality & quickly discovers errors, allowing for effortless diagnostics & maintenance.\n\n An Added Line of Defense Against Attacks&1\n Defend your network with D-Link&153;s innovative Safeguard Engine&132;&162; to neutralize threats such as malicious network flooding attacks, ARP spoofing, & bogus DHCP IP addressing. Compatible with 802.1X RADIUS server applications, port-based & host-based authentication are applied through the Access Control List (ACL) to enhance network security.&1\n\n Seamless Integration for All Access Layer Requirements\n The DGS-2000 Series

Includes:: a wide variety of port & media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps Gb E/SFP combo ports, & 100/1000 Mbps SFP ports. The DGS-2000-10, DGS-2000-26, DGS-2000-10P & DGS-2000-10MP models feature two 100/1000 Mbps SFP ports, while all other DGS-2000 Series models feature two or four Gb E/SFP combo ports, allowing you to choose the most suitable media type for your requirements.\n All DGS-2000 Series Po E switches include support for IEEE 802.3af/at & higher power budgets up to 370W, allowing more Po E devices to be powered by the switch. in addition, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates & manages power fed to IEEE 802.3at Po E+ powered devices for optimal power distribution.\n\n Qo S (Quality of Service)
- Unhindered Surveillance & Vo IP with a Simple Click\n If you need surveillance or Vo IP, there is no need to build a dedicated network. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly, & your Vo IP calls will be crystal-clear from beginning to end, even during peak working hours.\n\n Versatile Management&1\n The DGS-2000 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility allows customers to easily discover multiple D-Link Managed Access Switches within the same L2 network segment & display them on-screen for instant access, so users do not need to change the IP address of their PC. This allows for simultaneous configuration & setup of all discovered devices, including password changes & firmware upgrades. The DGS-2000 Series also supports Command Line Interface (CLI) through Telnet, SSH & the console port.\n\n\n\n\n\n Product Model: DGS-2000-10\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_86273847_1613548211_1846_26739.pdf\n\n


...

The DGS-2000 Series provide a diverse range of Gigabit port densities to accommodate various needs of enterprise access layer connectivity. With options such as Po E to conveniently power edge devices, SFP ports to extend network connectivity, advanced Layer 2 functionalities, & Layer 3 Lite manageability, the DGS-2000 Series is the ideal choice for any enterprise access layer deployment.\n\n Ultra High Availability\n For mission critical environments, the DGS-2000 series supports IGMP snooping, port mirroring, Spanning Tree Protocol (STP), & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers.\n Network maintenance features include loopback detection & cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting & terminating switching loops.\n The cable diagnostics feature, designed primarily for administrators & customer service representatives, determines the cable quality & quickly discovers errors, allowing for effortless diagnostics & maintenance.\n\n An Added Line of Defense Against Attacks&1\n Defend your network with D-Link&153;s innovative Safeguard Engine&132;&162; to neutralize threats such as malicious network flooding attacks, ARP spoofing, & bogus DHCP IP addressing. Compatible with 802.1X RADIUS server applications, port-based & host-based authentication are applied through the Access Control List (ACL) to enhance network security.&1\n\n Seamless Integration for All Access Layer Requirements\n The DGS-2000 Series

Includes:: a wide variety of port & media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps Gb E/SFP combo ports, & 100/1000 Mbps SFP ports. The DGS-2000-10, DGS-2000-26, DGS-2000-10P & DGS-2000-10MP models feature two 100/1000 Mbps SFP ports, while all other DGS-2000 Series models feature two or four Gb E/SFP combo ports, allowing you to choose the most suitable media type for your requirements.\n All DGS-2000 Series Po E switches include support for IEEE 802.3af/at & higher power budgets up to 370W, allowing more Po E devices to be powered by the switch. in addition, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates & manages power fed to IEEE 802.3at Po E+ powered devices for optimal power distribution.\n\n Qo S (Quality of Service)
- Unhindered Surveillance & Vo IP with a Simple Click\n If you need surveillance or Vo IP, there is no need to build a dedicated network. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly, & your Vo IP calls will be crystal-clear from beginning to end, even during peak working hours.\n\n Versatile Management&1\n The DGS-2000 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility allows customers to easily discover multiple D-Link Managed Access Switches within the same L2 network segment & display them on-screen for instant access, so users do not need to change the IP address of their PC. This allows for simultaneous configuration & setup of all discovered devices, including password changes & firmware upgrades. The DGS-2000 Series also supports Command Line Interface (CLI) through Telnet, SSH & the console port.\n\n\n\n\n\n Product Model: DGS-2000-10\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_86273847_1613548211_1846_26739.pdf\n\n


...

The DGS-2000 Series provide a diverse range of Gigabit port densities to accommodate various needs of enterprise access layer connectivity. With options such as Po E to conveniently power edge devices, SFP ports to extend network connectivity, advanced Layer 2 functionalities, & Layer 3 Lite manageability, the DGS-2000 Series is the ideal choice for any enterprise access layer deployment.\n\n Ultra High Availability\n For mission critical environments, the DGS-2000 series supports IGMP snooping, port mirroring, Spanning Tree Protocol (STP), & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers.\n Network maintenance features include loopback detection & cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting & terminating switching loops.\n The cable diagnostics feature, designed primarily for administrators & customer service representatives, determines the cable quality & quickly discovers errors, allowing for effortless diagnostics & maintenance.\n\n An Added Line of Defense Against Attacks&1\n Defend your network with D-Link&153;s innovative Safeguard Engine&132;&162; to neutralize threats such as malicious network flooding attacks, ARP spoofing, & bogus DHCP IP addressing. Compatible with 802.1X RADIUS server applications, port-based & host-based authentication are applied through the Access Control List (ACL) to enhance network security.&1\n\n Seamless Integration for All Access Layer Requirements\n The DGS-2000 Series

Includes:: a wide variety of port & media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps Gb E/SFP combo ports, & 100/1000 Mbps SFP ports. The DGS-2000-10, DGS-2000-26, DGS-2000-10P & DGS-2000-10MP models feature two 100/1000 Mbps SFP ports, while all other DGS-2000 Series models feature two or four Gb E/SFP combo ports, allowing you to choose the most suitable media type for your requirements.\n All DGS-2000 Series Po E switches include support for IEEE 802.3af/at & higher power budgets up to 370W, allowing more Po E devices to be powered by the switch. in addition, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates & manages power fed to IEEE 802.3at Po E+ powered devices for optimal power distribution.\n\n Qo S (Quality of Service)
- Unhindered Surveillance & Vo IP with a Simple Click\n If you need surveillance or Vo IP, there is no need to build a dedicated network. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly, & your Vo IP calls will be crystal-clear from beginning to end, even during peak working hours.\n\n\n Versatile Management&1\n The DGS-2000 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility allows customers to easily discover multiple D-Link Managed Access Switches within the same L2 network segment & display them on-screen for instant access, so users do not need to change the IP address of their PC. This allows for simultaneous configuration & setup of all discovered devices, including password changes & firmware upgrades. The DGS-2000 Series also supports Command Line Interface (CLI) through Telnet, SSH & the console port.\n\n\n\n\n\n Product Model: DGS-2000-28\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_86271490_1613560362_457_2148.pdf\n\n


...

The DGS-2000 Series provide a diverse range of Gigabit port densities to accommodate various needs of enterprise access layer connectivity. With options such as Po E to conveniently power edge devices, SFP ports to extend network connectivity, advanced Layer 2 functionalities, & Layer 3 Lite manageability, the DGS-2000 Series is the ideal choice for any enterprise access layer deployment.\n\n Ultra High Availability\n For mission critical environments, the DGS-2000 series supports IGMP snooping, port mirroring, Spanning Tree Protocol (STP), & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers.\n Network maintenance features include loopback detection & cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting & terminating switching loops.\n The cable diagnostics feature, designed primarily for administrators & customer service representatives, determines the cable quality & quickly discovers errors, allowing for effortless diagnostics & maintenance.\n\n An Added Line of Defense Against Attacks&1\n Defend your network with D-Link&153;s innovative Safeguard Engine&132;&162; to neutralize threats such as malicious network flooding attacks, ARP spoofing, & bogus DHCP IP addressing. Compatible with 802.1X RADIUS server applications, port-based & host-based authentication are applied through the Access Control List (ACL) to enhance network security.&1\n\n Seamless Integration for All Access Layer Requirements\n The DGS-2000 Series

Includes:: a wide variety of port & media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps Gb E/SFP combo ports, & 100/1000 Mbps SFP ports. The DGS-2000-10, DGS-2000-26, DGS-2000-10P & DGS-2000-10MP models feature two 100/1000 Mbps SFP ports, while all other DGS-2000 Series models feature two or four Gb E/SFP combo ports, allowing you to choose the most suitable media type for your requirements.\n All DGS-2000 Series Po E switches include support for IEEE 802.3af/at & higher power budgets up to 370W, allowing more Po E devices to be powered by the switch. in addition, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates & manages power fed to IEEE 802.3at Po E+ powered devices for optimal power distribution.\n\n Qo S (Quality of Service)
- Unhindered Surveillance & Vo IP with a Simple Click\n If you need surveillance or Vo IP, there is no need to build a dedicated network. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly, & your Vo IP calls will be crystal-clear from beginning to end, even during peak working hours.\n\n\n Versatile Management&1\n The DGS-2000 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility allows customers to easily discover multiple D-Link Managed Access Switches within the same L2 network segment & display them on-screen for instant access, so users do not need to change the IP address of their PC. This allows for simultaneous configuration & setup of all discovered devices, including password changes & firmware upgrades. The DGS-2000 Series also supports Command Line Interface (CLI) through Telnet, SSH & the console port.\n\n\n\n\n\n Product Model: DGS-2000-28\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_86271490_1613560362_457_2148.pdf\n\n


...